Gold Terra Expands High-Grade MP-Ryan Zone with 31.89 g/t Au over 3 metres including 69.4 g/t Au over 1 metre, Northbelt Mispickel area, Yellowknife, NWT
1 / 8
Gold Terra Expands High-Grade MP-Ryan Zone with 31.89 g/t Au over 3 metres including 69.4 g/t Au
over 1 metre, Northbelt Mispickel area, Yellowknife, NWT
June 7, 2022, Vancouver, B.C. – Gold Terra Resource Corp. (TSX-V: YGT; Frankfurt: TX0; OTC QX: YGTFF)
(“Gold Terra” or the “Company” ) today announced assay results for three (3) additional drill hole s,
GTCM22-004, 008 and 014 designed to expand high grade mineralization in the Mispickel area . Drilling
continues to extend gold mineralization in the new high-grade MP-Ryan Zone, a second zone situated
west of the main Mispickel area that has the potential to add ounces to the original Mispickel zone, with
both zones near surface. To date, the Company has released 8 holes out of the 19 -hole winter program
which totals 6011 metres.
Significant intersections for the three holes in the MP-Ryan Zone include:
• GTWL22-014- intersected 31.89 g/t gold (Au) over 3 metres including 69.4 g/t Au over 1 metre
• GTWL22-004 – intersected 7.63 g/t gold over 3 meters, including a visible gold-bearing vein which
returned 22.5 g/t Au over 1 meter
• GTWL22-008 - intersected 4.17 g/t Au over 6 meters, inc luding 11.35 g/t Au over 1 meter , and
including 11.8 g/t Au over 1 meter
Chairman and CEO, Gerald Panneton, commented, “These high-grade drill results indicate that the MP-
Ryan Zone is developing into a new high-grade gold zone approximately 100 to 150m west of the main
Mispickel area. This additional high-grade gold zone is a great indication of a larger system than previously
thought in this area and opens up the whole area for other significant high-grade discoveries. The Mispickel
area will be part of our updated NI 43-101 resource scheduled to be announced in Q4 of this year. The
Mispickel area is situated 20 kilometres north of Yellowknife and complements our flagship Con Mine
Property where we are currently drilling at depth along the Campbell Shear south of the Con.”
Figure 1: Drilling in the North and South
2 / 8
This drilling program of 19 holes totaling 6,011 metres was part of a small winter program in the northern
part of the Company’s Yellowknife City Gold Project. At least ten (10) holes have intersected visible gold
(VG) in a wide sheared vertical structure currently extended over a minimum strike length of at least 450
metres. Assays are pending for all the remaining 11 holes.
The Company’s 2022 primary drilling program remains focused on testing the continuity of the
mineralized zones within the Campbell shear south of the former Con Mine with the objective of adding
high-grade ounces to the current 1.2 Moz inferred resources (see March 31, 2021 Technical Report).
Following closure of the winte r program, the company is continuing its drilling on the Campbell shear
structure south of the former Con Mine which produced 6.1 Moz (1938-2003).
Drilling Results
Hole GTWL22-004 intersected a zone of moderately sheared silty bedding with argillitic intervals hosting
increased mineralization and veining . Visible gold is present in a small (4 cm) quartz vein from 57 -60
metres returning 7.63 g/t Au over 3 met res, including a visible gold-bearing vein which returned 22.5
g/t Au over 1 metre.
A second zone from 84.5-93.5 metres also returned anomalous gold values with 0.96 g/t Au over 9 metres,
including 2.47 g/t Au over 1.5 metres, and 4.27 g/t Au over 1 metre.
VG in hole GTWL22-004 is shown in the following Figure 2 and all pictures can be found on the Company
website at www.goldterracorp.com.
Figure 2: Visible gold in a mineralized quartz vein in hole GTWL22-004
GTWL22-008 was drilled on the same northing as hole GTWL22-004 and was designed to intersect the
Footwall, Main, and Hanging Wall Zones. Anomalous gold was intersected in all three zones.
• Footwall zone - The hole intersected broad zones of anomalous gold mineralization from 44 to 98
metres containing 4.17 g/t Au over 6 metres, and including 11.35 g/t Au over 1 metre and 11.8
3 / 8
g/t Au over 1 met re. The Footwall Zone contains sub -centimeter smoky laminated quartz veins
with spotty chlorite along vein selvages with a halo of medium grained arsenopyrite in the host
rock adjacent to veining. There were three grains of gold in smoky quartz ranging from matchhead
to pinhead at 78.3 metres.
• Main Zone – The hole intersected 0.37 g/t Au over 18 metres from 109-127 metres with similar
veining and mineralization to the Footwall Zone.
• Hanging Wall Zone - An interval of pale to smoky grey quartz veining with minor fine and needle
to coarse arsenopyrite ± pyrrhotite in the pressure shadows was encountered from 324 -333
metres. This includes 0.74 g/t Au over 9 metres, including 1.75 g/t Au over 3 metres from 326-329
metres.
Figure 3: Visible gold in the Footwall Zone of GTWL22-008
GTWL22-014 - The Hole was drilled to expand on the newly discovered zone from hole GTWL22-007 (May
5, 2022 press release). This hole is approximately 30 metres along-strike to the south from hole 007. The
hole intersected zones of strong mineralization and quartz veining, similar to what is observed in Mispickel
proper.
• An intersection of smoky veining from 43 -46 metres contains a large pale to smoky quartz vein
with multiple grains of visible gold along small fractures in the vein . The vein is mineralized with
arsenopyrite, pyrite ± sphalerite and contains small sections of patchy chlorite. This intersection
grades 31.89 g/t Au over 3 metres, including 69.4 g/t Au over 1 metre.
• An intersection from 81 -89 metres that contains 15% dark smoky grey quartz veining with
pyrrhotite, pyrite, and arsenopyrite mineralization grades 1.15 g/t Au over 8 met res, including
2.54 g/t Au over 3 metres.
• A zone from 138 -140 metres with narrow quartz veins and minor arsenopyrite in argillitic rocks
grades 1.79 g/t Au over 2 metres.
4 / 8
Figure 4: Visible gold in hole GTWL22-014
A table of significant drill intersections for holes GTWL22-004, 008 and 0014 is shown in Table 1:
Table 1 - GTWL22-004, 008 and 0014 intersections
Hole From
(metres)
To
(metres)
Width
(metres)
Grade
(g/t Au)
GTWL22-
004
56 59 3 7.63
INCL. 57 58 1 22.5
AND 84.5 93.5 9 0.96
INCL. 84.5 86 1.5 2.47
INCL. 91.5 92.5 1 4.27
GTWL22-
008
78 84 6 4.17
INCL. 78 79 1 11.35
INCL. 83 84 1 11.8
AND 326 329 3 1.75
GTWL22-
014
43 46 3 31.89
INCL. 44 45 1 69.4
AND 81 89 8 1.15
INCL. 85 88 3 2.54
AND 138 140 2 1.79
5 / 8
Drilling in the new MP-Ryan Zone is extending the zone along a 500-metre-high grade trend which remains
open in all directions. During the winter 2022 program 6,011 metres have been drilled in 19 holes.
Logging and sampling are ongoing, with completion of sample shipments expected by the end of June.
The location of drill holes in the MP-Ryan Zone are shown in the following Figure 5.
`
Figure 5: Location of MP-Ryan Zone drill holes
Cross-section for holes GTWL22-004 and 008, and 014 is shown in Figure 6 & 7:
6 / 8
2022 Drill Program
The Company intends to drill approximately 40,000 metres in 2022 with the objective to delineate a high-
grade gold mineral resource to add to the Company’s current 1.2 million inferred ounces (See the technical
report, titled "Technical Report on the 2021 Updated Mineral Resource Est imates, Northbelt Property,
Yellowknife City Gold Project, Yellowknife, Northwest Territories, Canada" with an effective date of March
14, 2021, which can be found on the Company's website at https://www.goldterracorp.com and on
SEDAR at www.sedar.com) and ultimately advance towards an economic study.
The 2022 drill program is well underway with two rigs drilling the Campbell Shear south of the former
high-grade Con Mine, with one deep drill rig targeting the Campbell Shear at a depth of approximately
1000 metres below surface and at a 200-metre spacing. A second drill rig is allocated to test the Campbell
shear, north of Yellorex zone which was not part of the original agreement with Newmont (September
2020) but is now part of the updated agreement (November 2021) covering all Newmont claims and leases
over the former Con Mine area.
Technical Appendix
This news release reports the assay results from three (3) drill holes totalling 812 metres from which 658
core samples were assayed. Assays results range from non-detectable gold to a highest assay of 69.4 g/t
Au. The Company inserts certified standards and blanks into the sample stream as a check on laboratory
Quality Control (QC). Drill core samples are cut by diamond saw at Gold Te rra’s core facilities in
Figure 7 – Cross-section of hole GTWL22-0014
Figure 6 – Cross-section of hole GTWL22-004 and 008
7 / 8
Yellowknife. A halved core sample is left in the core box. The other half core is sampled and transported
by Gold Terra personnel in securely sealed bags to ALS preparation laboratory (“ALS”) in Yellowknife or to
Actlabs assay lab in Kamloops, BC . Samples prepared by ALS are shipped to ALS’s Vancouver facility for
gold analysis. Gold assays of >3 g/t are re -assayed on a 30 g split by fire assay with gravimetric finish.
Samples with visible gold are additionally assayed us ing a screen metallic method. Both ALS and Actlabs
are certified and accredited laboratory services. ALS and Actlabs routinely inserts certified gold standards,
blanks and pulp duplicates, and results of all QC samples are reported.
Drill holes were drilled at right angles to the structure hosting the mineralization and dip angles of holes
were designed to intersect the zones as close to normal as possible. Zones reported here are interpreted
to be approximately 90 percent true thickness.
The technical info rmation contained in this news release has been reviewed and approved by Joseph
Campbell, Chief Operating Officer, a Qualified Person as defined in National Instrument 43-101 - Standards
of Disclosure for Mineral Projects.
About Gold Terra’s Yellowknife City Gold Project
The YCG project encompasses 800 sq. km of contiguous land immediately north, south and east of the
City of Yellowknife in the Northwest Territories. Through a series of acquisitions, Gold Terra controls one
of the six major high -grade gold camps in Canada. Being within 10 kilometres of the City of Yellowknife,
the YCG is close to vital infrastructure, including all -season roads, air transportation, service providers,
hydro-electric power, and skilled tradespeople. Gold Terra is currently focusing its drilli ng on the prolific
Campbell shear, where 14 Moz of gold has been produced, and most recently on the Con Mine Option
claims immediately south of the past producing Con Mine (1938-2003).
The YCG lies on the prolific Yellowknife greenstone belt, covering nea rly 70 kilomet res of strike length
along the main mineralized shear system that host the former -producing high-grade Con and Giant gold
mines. The Company's exploration programs have successfully identified significant zones of gold
mineralization and multiple targets that remain to be tested which reinforces the Company's objective of
re-establishing Yellowknife as one of the premier gold mining districts in Canada.
Visit our website at www.goldterracorp.com.
For more information, please contact:
Gerald Panneton, CEO & Executive Chairman
Mara Strazdins, Manager of Investor Relations
Phone: 1-778-897-1590 | 604-689-1749 ext 102
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Note Regarding Forward-Looking Information
Certain statements made and information contained in this news release constitute "forward -looking
information" within the meaning of applicable securities legislation (" forward-looking information ").
Generally, this forward-looking information can, but not always, be identified by use of forward -looking
terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled",
8 / 8
"estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of
such words and phrases or statements that certain actions, events, conditions or results "will", "may",
"could", "would", "might" or "will be taken", "occur" or "be ach ieved" or the negative connotations
thereof.
All statements other than statements of historical fact may be forward -looking information. Forward -
looking information is necessarily based on estimates and assumptions that are inherently subject to
known and unknown risks, uncertainties and other factors that may cause the actual results, level of
activity, performance, or achievements of the Company to be materially different from those expressed
or implied by such forward-looking information. In particular, this news release contains forward-looking
information regarding the current drilling on the Campbell Shear on the Newmont Con Mine Option
potentially adding high grade ounces to the Company’s current YCG mineral resource, future planned
drilling on the Con Mine Option area and the Company's objective of re -establishing Yellowknife as one
of the premier gold mining districts in Canada.
There can be no assurance that such statements will prove to be accurate, as the Company's actual results
and future events could differ materially from those anticipated in this forward -looking information as a
result of the factors discussed in the "Risk Factors" section in the Company's most recent MD&A and
annual information form available under the Company's profile at www.sedar.com.
Although the Company has attempted to identify important factors that wo uld cause actual results to
differ materially from those contained in forward -looking information, there may be other factors that
cause results not to be as anticipated, estimated or intended. The forward-looking information contained
in this news release is based on information available to the Company as of the date of this news release.
There can be no assurance that such statements will prove to be accurate, as actual results and future
events could differ materially from those anticipated in such stat ements. All of the forward -looking
information contained in this news release is qualified by these cautionary statements. Readers are
cautioned not to place undue reliance on forward -looking information due to the inherent uncertainty
thereof. Except as r equired under applicable securities legislation and regulations applicable to the
Company, the Company does not intend, and does not assume any obligation, to update this forward -
looking information.