Gold Terra Announces Start of 2025 Drilling Program Targeting High-Grade Gold in the Campbell Shear, Con Mine Option Property, NWT
1 / 5
Gold Terra Announces Start of 2025 Drilling Program Targeting High-Grade Gold in the Campbell
Shear, Con Mine Option Property, NWT
Vancouver, BC –January 10, 2025 – Gold Terra Resource Corp. (TSX -V: YGT; Frankfurt: TX0; OTCQX:
YGTFF) (“Gold Terra” or the “Company”) is pleased to announce the start of its 2025 wedge hole drilling
program that will continue targeting the prolific Campbell Shear (CS) from master hole GTCM24-056 on
the Con Mine Option (CMO) Property. Hole GTCM24-056 was drilled to a depth of 3,002 metres and will
serve as a master hole from which to branch off with as many wedges as possible to evaluate the CS 600
metres below the current Robertson shaft depth (1,900 metres), up-dip and laterally. The wedge hole
drilling program allows for a more efficient and cheaper evaluation of the CS rather than drilling holes
from surface.
The objective of the 2025 wedge hole drilling program is to continue testing for high-grade gold in the CS
(past production of 5.1 Moz @ 16 g/t, refer to the Oct. 21, 2022 Technical Report) on the Con Mine below
the historic Con Mine underground workings. The CMO Property is under option from a subsidiary of
Newmont Corporation and is 100% acquirable by the Company upon fulfillment of certain conditions set
out in the CMO Property Option agreement, as reported in the Company's news release dated November
22, 2021. The target is located downdip from the 5.1 Moz mined gold deposit plunging steeply to the
south between elevation 1,900 metres (Robertson shaft depth) and 2,600 metres.
Chairman and CEO, Gerald Panneton, commented, "Building on our work in 2024, we are pleased to start
our 2025 wedge hole drilling program to assess the high-grade gold potential of the Campbell Shear below
the Robertson Shaft. This approach is a very efficient and cost-effective way to assess the CS at depth. We
anticipate that the wedge holes will open a large under -explored area down plunge from the prolific CS
that is 600 metres to 800 metres below the existing infrastructure. Our aim is to eventually add additional
high grade gold ounces to our next MRE (Mineral Resource Estimate).”
2025 Wedge Hole Drilling Program Highlights
The wedge hole drilling program is starting on January 10, 2025. The 2025 drilling program will consist of
an initial plan of wedge holes (5 to 7) with an approximate estimate drilling length of 3,000 metres.
Figure 1 below is a cross-section showing the master hole GTCM24-056 from which numerous wedges of
varying lengths are placed along to intersect the target area in depths shallower than that of the master
hole. The first wedge is planned to start at 2,000-2,100 metres downhole with a CS target of 2,700 metres,
or 800 metres below the Robertson shaft. Wedge holes are designed to target the CS at depth first, and
then up-dip with each successive wedge being higher up the master hole. The CS was initially intersected
at depth in deep hole GTCM23-055, which intersected 12.63 g/t Au over 1.7m in the CS structure
approximately 150m below the Con Mine workings, demonstrating the potential of the CS at depth.
2 / 5
Figure 1 is a cross section showing master hole GTCM24-056, the hanging granite wall zone, the Con Shear,
and the gold potential window of the CS targeted by wedge holes.
The 2025 deep drilling program aims to expand the September 2022 initial Mineral Resource Estimate
(“MRE”) ( see September 7, 2022 , press release ) of 109,000 Indicated ounces of contained gold and
432,000 Inferred ounces of contained gold between surface and 400 metres below surface along a 2 -
kilometre corridor of the Campbell Shear (October 21, 2022 MRE titled "Initial Mineral Resource Estimate
for the CMO Property, Yellowknife City Gold Project, Yellowknife, Northwest Territories, Canada " by
Qualified Person, Allan Armitage, Ph. D., P . Geo., SGS Geological Services , which can be found on the
Company's website at https://www.goldterracorp.com and on SEDAR at www.sedar.com.
Corporate Update - Shares for Debt Transaction
The Company has entered into a Debt Conversion Agreement (the “Agreement”) dated December 18, 2024
between Newmont FN Canada Holdings Ltd. and Miramar Northern Mining Limited (collectively, the
“Creditors”), Goldcorp Inc. (the “Subscriber”) and the Company to settle a debt in the amount of
$89,364.75 pertaining to the maintenance costs paid on the Con Mine properties between 2020 and 2023.
To settle the debt, the Company has agreed to issue 1,625,000 common shares to the Subscriber at $0.055
(being the 20 -day volume weighted average trading price ending on the last trading day before the
Company entered into this Agreement).
Upon issuance of the shares to the Subscriber, the outstanding liability shall be deemed fully satisfied.
The Transaction remains subject to the final approval of the TSX Venture Exchange. All securities issuable
in connection with the Transaction are subject to a hold -period expiring four months and one day after
the date of issuance.
3 / 5
The technical information contained in this news release has been reviewed and approved by Joseph
Campbell, Chief Operating Officer, a Qualified Person as defined in National Instrument 43-101 - Standards
of Disclosure for Mineral Projects.
About Gold Terra
The Yellowknife Project (YP) encompasses 918 sq. km of contiguous land immediately north, south and
east of the City of Yellowknife in the Northwest Territories. Through a series of acquisitions, Gold Terra
controls one of the six major high -grade gold camps in Canada. Being within 10 kilometres of the City of
Yellowknife, the YP is close to vital infrastructure, including all -season roads, air transportation, service
providers, hydro-electric power, and skilled tradespeople. Gold Terra is currently focusin g its drilling on
the prolific Campbell Shear, where approximately 14 Moz of gold has been produced, (refer to Gold Terra
Oct 21, 2022, Technical R eport) and most recently on the Con Mine Option (CMO) property claims
immediately south of the past producing Con Mine which produced 6.1 Moz between the Con, Rycon, and
Campbell shear structures (1938-2003).
The YP and CMO properties lie on the prolific Yellowknife greenstone belt, covering nearly 70 kilometres
of strike length along the main mineralized shear system that hosts the former-producing high-grade Con
and Giant gold mines. The Company's exploration programs have successfully identified significant zones
of gold mineralization and multiple targets that remain to be tested which reinforces the Company's
objective of re-establishing Yellowknife as one of the premier gold mining districts in Canada.
Visit our website at www.goldterracorp.com.
For more information, please contact:
Gerald Panneton, Chairman & CEO
Mara Strazdins, Investor Relations
Phone: 1-778-897-1590 | 604-689-1749 ext 102
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Information Concerning Estimates of Mineral Resources
Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability. Therefore,
investors are cautioned not to assume that all or any part of an Inferred Mineral Resource could ever be
mined economically. It cannot be assumed that a ll or any part of “Measured Mineral Resources,”
“Indicated Mineral Resources,” or “Inferred Mineral Resources” will ever be upgraded to a higher
category. The Mineral Resource estimates contained herein may be subject to legal, political,
environmental or other risks that could materially affect the potential development of such mineral
resources. Refer to the Technical Report, once filed, for more information with respect to the key
assumptions, parameters, methods and risks of determination associated with the foregoing.
Cautionary Note to United States Investors
The Company prepares its disclosure in accordance with the requirements of securities laws in effect in
Canada, which differ from the requirements of U.S. securities laws. Terms relating to Mineral Resources
in this news release are defined in accordance w ith NI 43 -101 under the guidelines set out in CIM
Definition Standards on Mineral Resources and Mineral Reserves, adopted by the Canadian Institute of
Mining, Metallurgy and Petroleum Council on May 19, 2014, as amended ("CIM Standards"). The U.S.
Securities and Exchange Commission (the "SEC") has adopted amendments effective February 25, 2019
4 / 5
(the "SEC Modernization Rules") to its disclosure rules to modernize the mineral property disclosure
requirements for issuers whose securities are registered with the SEC under the U.S. Securities Exchange
Act of 1934. As a result of the adoption of the SE C Modernization Rules, the SEC will now recognize
estimates of "Measured Mineral Resources", "Indicated Mineral Resources" and "Inferred Mineral
Resources", which are defined in substantially similar terms to the corresponding CIM Standards. In
addition, t he SEC has amended its definitions of "Proven Mineral Reserves" and "Probable Mineral
Reserves" to be substantially similar to the corresponding CIM Standards.
U.S. investors are cautioned that while the foregoing terms are "substantially similar" to corresponding
definitions under the CIM Standards, there are differences in the definitions under the SEC Modernization
Rules and the CIM Standards. Accordingly, there is no assurance any Mineral Resources that the Company
may report as "Measured Mineral Resources", "Indicated Mineral Resources" and "Inferred Mineral
Resources" under NI 43 -101 would be the same had the Company prepared the Mineral Resource
estimates under the standards adopted under the SEC Modernization Rules. In accordance with Canadian
securities laws, estimates of "Inferred Mineral Resources" cannot form the basis of feasibility or other
economic studies, except in limited circumstances where permitted under NI 43-101.
Cautionary Note Regarding Forward-Looking Information
Certain statements made and information contained in this news release constitute "forward -looking
information" within the meaning of applicable securities legislation (" forward-looking information ").
Generally, this forward-looking information can, but not always, be identified by use of forward -looking
terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled",
"estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations o f
such words and phrases or statements that certain actions, events, conditions or results "will", "may",
"could", "would", "might" or "will be taken", "occur" or "be achieved" or the negative connotations
thereof.
All statements other than statements of historical fact may be forward -looking information. Forward -
looking information is necessarily based on estimates and assumptions that are inherently subject to
known and unknown risks, uncertainties and other factor s that may cause the actual results, level of
activity, performance or achievements of the Company to be materially different from those expressed
or implied by such forward-looking information. In particular, this news release contains forward-looking
information regarding the current drilling on the Campbell Shear, potentially adding ounces to the
Company’s current YCG mineral resource, and the Company's objective of re-establishing Yellowknife as
one of the premier gold mining districts in Canada.
There can be no assurance that such statements will prove to be accurate, as the Company's actual results
and future events could differ materially from those anticipated in this forward -looking information as a
result of the factors discussed in the "Risk Factors" section in the Company's most recent MD&A and
annual information form available under the Company's profile at www.sedar.com.
Although the Company has attempted to identify important factors that would cause actual results to
differ materially from those contained in forward -looking information, there may be other factors that
cause results not to be as anticipated, estimated or intended. The forward-looking information contained
in this news release is based on information available to the Company as of the date of this news release.
There can be no assurance that such statements will prove to be accurate, as actual results and f uture
events could differ materially from those anticipated in such statements. All of the forward -looking
information contained in this news release is qualified by these cautionary statements. Readers are
cautioned not to place undue reliance on forward -looking information due to the inherent uncertainty
thereof. Except as required under applicable securities legislation and regulations applicable to the
5 / 5
Company, the Company does not intend, and does not assume any obligation, to update this forward -
looking information.