Westhaven Drills 12.00 Metres of 5.54 G/T GOLD and 2.00 Metres of 44.90 G/T GOLD __________________________________________________________________________________________
WESTHAVEN DRILLS 12.00 METRES OF 5.54 G/T GOLD AND 2.00 METRES OF 44.90 G/T
GOLD
__________________________________________________________________________________________
Vancouver, B.C. – May 16th, 2019 – Westhaven Ventures Inc. (TSX-V:WHN) is pleased to report drill
results from its winter drill campaign at its 15,542 hectare Shovelnose gold property, located within the
prospective Spences Bridge Gold Belt (SBGB), which borders the Coquihalla Highway 30 kilometres
south of Merritt, British Columbia. The program consisted of 3,031 metres of diamond drilling in 8
holes.
Recent Highlights:
• Drill hole SN19-05 (260.00-344.80m): 85.80 metres (m) of 0.80 g/t gold (Au) and 4.02 g/t silver
(Ag), including 1.00m of 14.50 g/t Au and 191.00 g/t Ag. This represents the highest gram-metre
2nd vein zone intercept to date. The first zone in SN19-05 (reported April 22nd, 2019) intersected
15.48m of 4.77 g/t Au and 21.77 g/t Ag , including 6.48m of 8.55 g/t Au and 38.55 g/t A g, and
including, 1.55m of 32.60 g/t Au and 130.68 g/t Ag.
• Drill hole SN19-06 (165.97-197.00m): 31.03m of 2.88 g/t Au and 19.91 g/t Ag, including 12.00m
of 5.54 g/t Au and 36.61 g/t Ag and 4.50m of 8.51 g/t Au and 56.60 g/t Ag.
• Drill hole SN19-06 (227.00-238.00m): 2.00m of 44.90 g/t Au and 45.40 g/t Ag.
• SN19-06 is 40 metres south of hole SN18-15 which returned 46.90m of 8.95 g/t Au and 65.47 g/t
Ag.
• SN19-07 successfully intersected a gold mineralized vein zone (13.00m of 1.06 g/t Au and 3.05
g/t Ag) south of the cross-fault intersected in hole SN18 -19 and may represent the southward
continuation of Zone 1.
Gareth Thomas, President & CEO of Westhaven states, "The recently reported drill intercepts in holes
SN19-05 and SN19-06 demonstrate continuity of the wide, high -grade mineralization encountered in
both the main vein zone and the second vein zone. The gold mineraliz ation intersected in SN19-07,
although low grade, is significant as it appears to represent the southward continuation of the main
vein zone south of the cross -fault encountered in previous drilling. Ground geophysics appears to
indicate several hundred metres of potential str ike length to the southeast from our most southern
South Zone drill intercept. We will test the South Zone along strike in the upcoming, fully financed
drill campaign starting in early June. Drilling will look to expand this high-grade discovery while also
looking to discover additional zones of gold mineralization outside of the south zone."
TSX-V:WHN
2019 WINTER DRILLING HIGHLIGHTS
Hole From (m) To (m) Interval (m) Au (g/t) Ag (g/t)
SN19-01 89.00 92.00 3.00 4.65 10.86
95.20 154.34 59.14 0.43 2.79
154.34 167.00 12.66 39.31 133.11
167.00 177.00 10.00 2.26 15.13
SN19-02 130.11 148.00 17.89 3.70 32.64
incl 137.15 145.00 7.85 7.00 59.13
174.94 175.44 0.50 13.65 36.50
SN19-03 44.00 49.00 5.00 1.60 6.66
92.00 93.00 1.00 3.52 2.90
SN19-04 246.27 266.52 20.25 1.02 9.98
incl 251.00 255.00 4.00 2.52 31.15
SN19-05 156.04 184.76 28.72 2.97 13.68
incl 161.52 177.00 15.48 4.77 21.77
incl 161.52 168.00 6.48 8.55 38.55
incl 161.52 163.07 1.55 32.60 130.68
260.00 344.80 85.80 0.80 4.02
incl 292.00 294.00 2.00 7.02 3.90
incl 307.00 314.00 7.00 2.78 29.79
incl 311.00 312.00 1.00 14.50 191.00
incl 343.01 343.65 0.64 8.21 10.15
SN19-06 165.97 197.00 31.03 2.88 19.91
incl 181.00 193.00 12.00 5.54 36.61
incl 183.50 188.00 4.50 8.51 56.60
234.00 236.00 2.00 44.90 45.40
SN19-07 232.00 245.00 13.00 1.06 3.05
SN19-08 ASSAYS PENDING
*Drilling to date is limited so true widths cannot be definitively determined. However, based on the geology of the vein zone with a steep
dip to the west, true widths are estimated to be about 80 -90% of reported interval lengths. Please see the plan map and cross section s
below or visit: http://westhavenventures.com/projects/shovelnose-gold/details/
Peter Fischl, Exploration Manager, stated, “This program is noted for continuing to return bonanza
gold grades, including the best hole ever drilled at Shovelnose, hole SN19-01 (39.31 g/t Au over 12.66m,
497 gram-metres Au) and for confirming the potential for mineralization in the south fault block with
the drilling of SN19-07. This hole has extended the strike-length of Zone 1 southeast into the south fault
block for a total of 550 metres. Drilling is now planned to continue targeting the southeastern trend of
Zone 1 into the south fault block in addition to the resistivity anomalies defined along the projected
southeastward continuation of Zone 1.”
The deeper portions of hole SN19-05 encountered a second vein zone correlated to Zone 2 at 307 .00-
388.00m depth. Although dominantly comprised of centimetre scale veinlets, it locally returned assays
of up to 14.5 0 grams per tonne over 1m within a broader interval returning 0.80 grams per tonne Au
over 85.80m. This zone will be tested with an upper cut to assess for a more constricted zone of wider
and higher-grade quartz veins up-dip.
Hole SN19-06 confirmed the southeastward continuity of Zone 1, now with a drilled strike -length of
490 metres extending from hole SN18-07 southeast at a strike of 135 degrees to hole SN19-06.
Hole SN19-07 was drilled from the same location as SN19 -06, but more easterly at an azimuth of 075o
to test for the location of an inferred cross-fault that may displace the vein zones defined to the north.
This hole was collared in the south fault block. This hole returned a quartz veined interval of 1.06 g/t
Au and 3.05 g/t Ag over 13.0 0m (232.00-245.00m), which includes quartz vein intersections of up to
3.40m wide. This intercept is on -trend with veining in the north fault block and may represent the
southeastward continuation of Zone 1 into the south fault block. This suggests that lateral displacement
of the South Zone vein system is minimal across this fault. Most of the displacement is vertical, but the
lack of orange-pink potassium feldspar in the quartz veining here, which is typical of the deeper roots
of the vein zones in the north fault block, suggests there is potential for preservation of the mineralized
quartz veining. Additional drilling is therefore planned, following the trend of Zone 1 to the southeast
into areas of high resistivity within the south fault block.
Hole SN19-08 was drilled in the south fault block as an upper cut to SN18 -19, testing the shallower
portions of quartz veining and silica -pyrite healed rhyolite breccia encountered in hole SN18 -19. This
hole encountered andesite and andesite tuff breccia over its length, suggesting the presence of a reverse
fault that has uplifted andesite basement westward over the quartz veined and brecciated rhyolite and
rhyolitic tuffs. This andesite body appears as a magnetic high flanking Zone 2 veining to the northeast
in the north fault block.
Qualified Person Statement
Peter Fischl, P.Geo., who is a Qualified Person within the context of National Instrument 43-101, has
read and takes responsibility for this release.
QA/QC
Core samples were prepared using the PREP -31 package in ALS’s Kamloops facility each core sample is crushed to better than 70 %
passing a 2 mm (Tyler 9 mesh, US Std. No.10) screen. A split of 250 g is taken and pulverized to better than 85 % passing a 75 micron
(Tyler 200 mesh, US Std. No. 200) screen. 0.75g of this pulverized split is digested by Four Acid and analyzed via ICP -MS (method
code ME-MS61m (+Hg)), which reports a 49 -element suite of elements. All samples are analyzed by Fire Assay with an AES f inish,
method code Au -ICP21 (30g sample size). Additional Au screening is performed using ALS’s Au -SCR24 method, select samples are
dry screened to 100 micron. A duplicate 50g fire assay is conducted on the undersized fraction as well as an assay on the entire oversize
fraction. Total Au content, individual assays and weight fractions are reported. All analytical and assay procedures are cond ucted in
ALS’s North Vancouver facility. A QA/QC program included laboratory and field standards inserted every 25 sa mples. At least one
field blank is inserted in every batch of 25 samples, with additional blanks inserted following samples with visible gold.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies
of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
The Spences Bridge Gold Belt (SBGB)
Westhaven owns a 100%-interest in 4 properties covering over 35,000 hectares within the prospective
SBGB, which is situated within a geological setting like those which host other significant epithermal
gold-silver systems. It is close to major transportation routes and infrastructure allowing for cost -
effective exploration. The SBGB is a 110 -kilometre northwest -trending belt of intermediate to felsic
volcanic rocks dominated by the Cretaceous Spences Bridge Group. Talisker Resources and Westhaven
have a combined control of 86% of the SBGB (225,000ha). Any ground staked by Talisker within 5
kilometres of Westhaven's existing projects will be subject to a 2.5% NSR. In addition , Westhaven has
a 30-day Right of First Refusal (ROFR) for a three -year period on any of Talisker’s properties outside
this 5-kilometre radius.
On behalf of the Board of Directors
WESTHAVEN VENTURES INC.
"Gareth Thomas"
Gareth Thomas, President, CEO & Director
Westhaven Ventures Inc. is a Canadian based exploration company focused on the acquisition and
exploration of prospective resource properties. Westhaven is focused on advancing its Shovelnose,
Prospect Valley, Skoonka and Skoonka North gold projects in British Columbia. Westhaven trades on
the TSX Venture Exchange under the ticker symbol WHN. For further information, please call 604-681-
5521 or visit Westhaven’s website at www.westhavenventures.com
PLAN MAP (MAGNETICS) OF WINTER DRILL PROGRAM
CROSS-SECTION OF SN19-05
CROSS-SECTION OF SN19-06
CROSS-SECTIONS OF SN19-07 and SN19-08