Wesdome Announces Latest Drill Results From Kiena Deep A Zone and Resumption of Drilling and Development Activities
Wesdome Announces Latest Drill Results From Kiena Deep A Zone and
Resumption of Drilling and Development Activities
TORONTO, May 11, 2020 -- Wesdome Gold Mines Ltd. (TSX: WDO) (“Wesdome” or the “Company”) today announces
additional results from underground definition and exploration drilling at the Company’s 100% owned Kiena Mine Complex in
Val d'Or, Quebec, compiled subsequent to the Company’s February 19, 2020 press release.
In addition, pursuant to a recent announcement from the Government of Quebec providing relief from certain emergency
measures implemented on March 25, 2020 in response to the Covid-19 Pandemic, mineral exploration activities in the province
will be permitted to resume effective today. Accordingly, the Company will be restarting its development and drilling activities
at the Kiena Mine Complex imminently.
Prior to the suspension of activities in March, seven underground drills were in operation, tasked with infill and up and down
plunge extension drilling of the Kiena Deep A Zone (the “A Zone”). Between February 19 and March 25, a total of 45 holes
totalling 7,045 metres (“m”) were drilled, and the assay results for 18 of those holes have been received and are being reported
below. This drilling has continued to confirm the overall continuity of the geometry and the high-grade gold mineralization of the
A Zone and identified additional mineralization outside of the most recent resource estimate (Figure 1). The A Zone now
extends down plunge in excess of 830 m (see February 19, 2020 press release). A total of 47,800 m in 164 new drill holes
have now been drilled since the latest resource estimate (September 2019), which is expected to be updated later in 2020.
Highlights of the recent drilling are listed below and summarized in Table 1.
Kiena Deep A Zone
• Hole 6599: 108.2 g/t Au over 3.0 m core length (30.5 g/t Au cut, 2.8 m true width) A Zone
• Hole 6660: 47.8 g/t Au over 5.2 m core length (42.8 g/t Au cut, 5.0 m true width) A Zone
• Hole 6583: 41.3 g/t Au over 12.4 m core length (23.2 g/t Au cut, 6.1 m true width) A2 Zone
All assays cut to 90.0 g/t Au. True widths are estimated.
79 Level Exploration Ramp
The 79 level exploration ramp, consisting of 576 m of down ramp development and drill platforms, was completed earlier in the
year. Two drills were mobilized into this area two weeks prior to the Covid-19 suspension to follow up on several previous
encouraging drill results in the potential up plunge extension of the A Zone as well as the down dip extension of the VC zones
between the 67 level and 105 level. It is interpreted that the VC zones are folded as they extend down plunge to possibly
connect with the A Zone. The exploration ramp could also serve as a haulage drift for any future production from this area as it
accesses the main shaft level dump pocket.
Mr. Duncan Middlemiss, President and CEO commented, “We are extremely pleased to be resuming development and drilling
activities at the Kiena Mine Complex, and we have implemented many facility and procedural changes at site to ensure that
these activities can be completed in a safe manner for our employees, which is our top priority. The drill program will continue
to focus on the testing of the potential up plunge extension of the A Zone and to convert inferred resources to indicated
resources in advance of an updated resource estimate later in the year.”
“We look forward to the completion of the Preliminary Economic Assessment (“PEA”) which is on schedule to be announced
later this month. The purpose of this study is to determine the viability of mining the existing resources, dated September
2019, in the immediate reach of the Kiena Mine. This will include only those resources proximal to the mine infrastructure,
specifically the A Zone, B Zone, S-50, VC Zones and the South Zone, which contain 450,000 ounces gold (“Au”) of indicated
resources (0.97M tonnes @ 14.5 g/t Au) and 397,000 ounces gold (Au) of inferred resources (1.12M tonnes @ 11.0 g/t).
Given that we have drilled an additional 47,800 m in 164 new drill holes since September 2019, we plan to update the mineral
resource estimate for Kiena mid-year. The updated mineral resource estimate will then be used as a basis for a Prefeasibility
Study (“PFS”) to justify a mine restart. Wesdome’s strategy is to make a production decision based on those resources in the
immediate mine area only. Longer term, our focus will turn to the remaining resources on the Kiena property, which all
together total 2.83M tonnes @ 8.7 g/t for 788,000 ounces in the measured and indicated category, and 2.92M tonnes @ 8.6
g/t for 798,000 ounces in the inferred category.
“Our 2020 plan was to drill a total of 85,000 m, however our ability to meet this goal may be impacted by the mandated seven
week suspension of activity at the Kiena Mine Complex. With the resumption of activities, we will continue down ramp
development in order to enhance and increase drill platforms providing access to the lower areas of the A Zone and further our
site preparations. In addition, detailed metallurgical and environmental studies are being conducted. We are also continuing
the installation of hydrostatic barriers to secure previously mined out areas, and improving mine ventilation in further support of
a possible mine restart.”
In order to identify additional exploration targets adjacent to the Kiena Mine, a regional Magnetotelluric (“MT”) Geophysical
Survey has been completed on the lake ice covering the Kiena deposit and the immediately surrounding volcanic rocks. The
survey was designed to identify deep structures up to 1.5 km below surface. A number of encouraging targets have been
identified and will be drill tested later in the year.
TECHNICAL DISCLOSURE
The technical and geoscientific content of this release has been compiled, reviewed and approved by Bruno Turcotte, P.Geo.,
(OGQ #453) Senior Project Geologist of the Company and a "Qualified Person" as defined in National Instrument 43-101 -
Standards of Disclosure for Mineral Projects.
Analytical work was performed by ALS Minerals of Val-d’Or (Quebec), a certified commercial laboratory (Accredited Lab #689).
Sample preparation was done at ALS Minerals in Val d'Or (Quebec). Assaying was done by fire assay methods with an
atomic absorption finish. Any sample assaying >3 g/t Au was rerun by fire assay method with gravimetric finish, and any
sample assaying >10 g/t Au was rerun with the metallic sieve method. In addition to laboratory internal duplicates, standards
and blanks, the geology department inserts blind duplicates, standards and blanks into the sample stream at a frequency of
one in twenty to monitor quality control.
ABOUT WESDOME
Wesdome Gold Mines has had over 30 years of continuous gold mining operations in Canada. The Company is 100%
Canadian focused with a pipeline of projects in various stages of development. The Company’s strategy is to build Canada’s
next intermediate gold producer, producing 200,000+ ounces from two mines in Ontario and Quebec. The Eagle River
Complex in Wawa, Ontario is currently producing gold from two mines, the Eagle River Underground Mine and the Mishi Open
pit, from a central mill. Wesdome is actively exploring its brownfields asset, the Kiena Complex in Val d’Or, Quebec. The
Kiena Complex is a fully permitted former mine with a 930-metre shaft and 2,000 tonne-per-day mill. The Company has further
upside at its Moss Lake gold deposit, located 100 kilometres west of Thunder Bay, Ontario. The Company has approximately
138.5 million shares issued and outstanding and trades on the Toronto Stock Exchange under the symbol “WDO”.
For further information, please contact:
Duncan Middlemiss or Lindsay Carpenter Dunlop
President and CEO VP Investor Relations
416-360-3743 ext. 2029 416-360-3743 ext. 2025
[email protected] [email protected]
220 Bay St, Suite 1200
Toronto, ON, M5J 2W4
Toll Free: 1-866-4-WDO-TSX
Phone: 416-360-3743, Fax: 416-360-7620
Website: www.wesdome.com
This news release contains “forward-looking information” which may include, but is not limited to, statements with respect to
the future financial or operating performance of the Company and its projects. Often, but not always, forward-looking
statements can be identified by the use of words such as “plans”, “expects”, “is expected”, “budget”, “scheduled”, “estimates”,
“forecasts”, “intends”, “anticipates”, or “believes” or variations (including negative variations) of such words and phrases, or
state that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved. Forward-
looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results,
performance or achievements of the Company to be materially different from any future results, performance or achievements
expressed or implied by the forward-looking statements. Forward-looking statements contained herein are made as of the date
of this press release and the Company disclaims any obligation to update any forward-looking statements, whether as a result
of new information, future events or results or otherwise. There can be no assurance that forward-looking statements will prove
to be accurate, as actual results and future events could differ materially from those anticipated in such statements. The
Company undertakes no obligation to update forward-looking statements if circumstances, management’s estimates or
opinions should change, except as required by securities legislation. Accordingly, the reader is cautioned not to place undue
reliance on forward-looking statements. The Company has included in this news release certain non-IFRS performance
measures, including, but not limited to, mine operating profit, mining and processing costs and cash costs. Cash costs per
ounce reflect actual mine operating costs incurred during the fiscal period divided by the number of ounces produced. These
measures are not defined under IFRS and therefore should not be considered in isolation or as an alternative to or more
meaningful than, net income (loss) or cash flow from operating activities as determined in accordance with IFRS as an
indicator of our financial performance or liquidity. The Company believes that, in addition to conventional measures prepared in
accordance with IFRS, certain investors use this information to evaluate the Company's performance and ability to generate
cash flow.
Table 1: Kiena Complex Drilling Assay and Composite Results
Composites
Hole No.
From
(m)
To
(m)
Core Length
(m)
Estimated
True
width (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name
Zone
6589 388.6 392.4 3.8 3.6 5.97 5.97 VC1 Zone
6651 256.6 259.5 2.9 1.9 11.20 11.20 VC1 Zone
6652* 257.4 260.4 3.0 2.0 11.56 11,56 VC1 Zone
6616 242.3 245.6 3.3 3.1 10.97 10.97 VC6 Zone
6618 265.5 269.5 4.0 3.7 9.84 9.84 VC6 Zone
6599 244.5 247.5 3.0 2.8 108.19 30.53 A Zone
6605AW3 367.3 368.3 1.0 0.5 32.60 32.60 A Zone
6624 168.9 183.2 14.3 9.1 11.77 11.77 A Zone
6625 144.5 150.1 5.7 3.4 9.89 9.89 A Zone
6630 235.7 239.2 3.5 2.4 7.43 7.43 A Zone
6631* 209.4 210.4 1.0 0.7 30.90 30.90 A Zone
6632 242.0 248.5 6.5 5.1 11.84 11.84 A Zone
6634* 193.0 196.2 3.2 2.7 45.05 40.64 A Zone
6660* 285.2 290.3 5.2 5.0 47.81 42.83 A Zone
6583* 620.9 624.9 4.0 2.0 6.58 6.58 A1 Zone
6584 506.0 509.0 3.0 1.8 5.64 5.64 A1 Zone
6599 251.5 256.0 4.5 4.2 7.11 7.11 A1 Zone
6605AW3 379.6 382.6 3.0 1.7 7.51 7.51 A1 Zone
6660* 298.3 301.0 2.7 2.6 40.51 37.25 A1 Zone
6581W3 474.3 477.3 3.0 2.0 8.45 8.45 A2 Zone
6583 628.9 641.3 12.4 6.1 41.30 23.24 A2 Zone
6584* 578.0 588.0 10.0 3.8 22.00 19.00 A2 Zone
6605AW1 273.6 290.7 17.1 7.4 19.87 11.23 A2 Zone
* Metallic Sieve Analysis Pending
Assays
Hole No.
From
(m)
To
(m)
Core Length
(m)
Grade
(g/t Au)
Name
Zone
6581W3 474.3 475.0 0.7 34.30 A2 Zone
6581W3 475.0 476.3 1.3 0.76 A2 Zone
6581W3 476.3 477.3 1.0 0.36 A2 Zone
6583 620.9 621.9 1.0 1.11 A1 Zone
6583* 621.9 622.9 1.0 20.00 A1 Zone
6583 622.9 623.9 1.0 2.94 A1 Zone
6583 623.9 624.9 1.0 2.27 A1 Zone
6583 628.9 629.9 1.0 2.90 A2 Zone
6583 629.9 630.9 1.0 7.18 A2 Zone
6583 630.9 631.9 1.0 0.22 A2 Zone
6583 631.9 632.9 1.0 0.97 A2 Zone
6583 632.9 633.9 1.0 0.10 A2 Zone
6583 633.9 635.0 1.1 0.26 A2 Zone
6583 635.0 635.9 0.9 39.40 A2 Zone
6583 635.9 636.9 1.0 20.50 A2 Zone
6583 636.9 637.9 1.0 157.00 A2 Zone
6583 637.9 638.9 1.0 33.90 A2 Zone
6583 638.9 639.9 1.0 247.00 A2 Zone
6583 639.9 640.6 0.7 4.02 A2 Zone
6583 640.6 641.3 0.7 5.44 A2 Zone
6584 506.0 507.0 1.0 8.16 A1 Zone
6584 507.0 508.0 1.0 0.18 A1 Zone
6584 508.0 509.0 1.0 8.58 A1 Zone
6584* 578.0 579.0 1.0 114.00 A2 Zone
6584* 579.0 580.0 1.0 96.00 A2 Zone
6584 580.0 581.0 1.0 1.15 A2 Zone
6584 581.0 581.6 0.6 0.60 A2 Zone
6584 581.6 582.4 0.8 1.33 A2 Zone
6584 582.4 583.3 0.9 0.33 A2 Zone
6584 583.3 584.0 0.7 1.65 A2 Zone
6584 584.0 585.0 1.0 0.12 A2 Zone
6584 585.0 586.0 1.0 1.02 A2 Zone
6584 586.0 587.0 1.0 1.61 A2 Zone
6584 587.0 588.0 1.0 3.23 A2 Zone
6589 388.6 389.6 1.0 1.71 VC1 Zone
6589 389.6 390.6 1.0 0.01 VC1 Zone
6589 390.6 391.6 1.0 2.51 VC1 Zone
6589 391.6 392.4 0.8 23.10 VC1 Zone
6599 244.5 245.3 0.8 1.90 A Zone
6599 245.3 246.5 1.2 0.06 A Zone
6599 246.5 247.5 1.0 323.00 A Zone
6599 251.5 253.1 1.6 4.05 A1 Zone
6599 253.1 254.0 0.9 0.41 A1 Zone
6599 254.0 255.0 1.0 0.02 A1 Zone
6599 255.0 256.0 1.0 25.3 A1 Zone
6605AW1 273.6 274.5 0.9 241.00 A2 Zone
6605AW1 274.5 275.4 0.9 102.50 A2 Zone
6605AW1 275.4 276.4 1.0 2.89 A2 Zone
6605AW1 276.4 277.6 1.2 0.11 A2 Zone
6605AW1 277.6 279.0 1.4 0.32 A2 Zone
6605AW1 279.0 280.0 1.0 0.02 A2 Zone
6605AW1 280.0 281.0 1.0 0.02 A2 Zone
6605AW1 281.0 282.0 1.0 0.61 A2 Zone
6605AW1 282.0 283.0 1.0 0.03 A2 Zone
6605AW1 283.0 284.0 1.0 0.10 A2 Zone
6605AW1 284.0 285.0 1.0 0.06 A2 Zone
6605AW1 285.0 285.7 0.6 0.16 A2 Zone
6605AW1 285.7 286.7 1.0 2.94 A2 Zone
6605AW1 286.7 287.7 1.0 5.17 A2 Zone
6605AW1 287.7 288.7 1.0 4.33 A2 Zone
6605AW1 288.7 289.7 1.0 6.84 A2 Zone
6605AW1 289.7 290.7 1.0 5.85 A2 Zone
6605AW3 367.3 368.3 1.0 32.60 A Zone
6605AW3 379.6 380.6 1.0 19.15 A1 Zone
6605AW3 380.6 381.6 1.0 2.95 A1 Zone
6605AW3 381.6 382.6 1.0 0.44 A1 Zone
6616 242.3 243.3 1.0 35.80 VC6 Zone
6616 243.3 244.3 1.0 0.03 VC6 Zone
6616 244.3 245.6 1.3 0.29 VC6 Zone
6618 265.5 266.5 1.0 5.77 VC6 Zone
6618 266.5 267.5 1.0 20.70 VC6 Zone
6618 267.5 268.5 1.0 10.50 VC6 Zone
6618 268.5 269.5 1.0 2.38 VC6 Zone
6624 168.9 169.9 1.0 11.05 A Zone
6624 169.9 170.9 1.0 0.56 A Zone
6624 170.9 172.1 1.2 3.55 A Zone
6624 172.1 173.1 1.0 0.09 A Zone
6624 173.1 174.1 1.0 2.62 A Zone
6624 174.1 175.1 1.0 10.05 A Zone
6624 175.1 176.1 1.0 0.12 A Zone
6624 176.1 177.1 1.0 59.50 A Zone
6624 177.1 177.7 0.6 6.19 A Zone
6624 177.7 178.4 0.7 2.69 A Zone
6624 178.4 179.5 1.1 36.90 A Zone
6624 179.5 180.5 1.0 2.27 A Zone
6624 180.5 181.5 1.0 1.61 A Zone
6624 181.5 182.5 1.0 17.80 A Zone
6624 182.5 183.2 0.7 17.40 A Zone
6625 144.5 145.1 0.6 11.45 A Zone
6625 145.1 146.1 1.0 0.81 A Zone
6625 146.1 147.1 1.0 1.26 A Zone
6625 147.1 147.7 0.6 2.65 A Zone
6625 147.7 148.4 0.7 43.70 A Zone
6625 148.4 149.1 0.7 18.95 A Zone
6625 149.1 150.1 1.0 1.47 A Zone
6630 235.7 236.7 1.0 7.18 A Zone
6630 236.7 238.1 1.4 7.40 A Zone
6630 238.1 239.2 1.1 7.71 A Zone
6631* 209.4 210.4 1.0 30.90 A Zone
6632 242.0 242.9 0.9 76.90 A Zone
6632 242.9 243.7 0.8 0.36 A Zone
6632 243.7 244.6 0.9 0.25 A Zone
6632 244.6 245.6 1.0 1.44 A Zone
6632 245.6 246.6 1.0 0.04 A Zone
6632 246.6 247.8 1.2 0.10 A Zone
6632 247.8 248.5 0.8 7.54 A Zone
6634 193.0 193.7 0.7 0.18 A Zone
6634* 193.7 194.4 0.8 80.40 A Zone
6634* 194.4 195.2 0.8 108.50 A Zone
6634 195.2 196.2 1.0 0.11 A Zone
6651 256.6 257.5 0.8 0.18 VC1 Zone
6651 257.5 258.5 1.0 31.30 VC1 Zone
6651 258.5 259.5 1.0 0.49 VC1 Zone
6652* 257.4 258.4 1.0 14.70 VC1 Zone
6652* 258.4 259.4 1.0 13.50 VC1 Zone
6652 259.4 260.4 1.0 6.47 VC1 Zone
6660* 285.2 286.5 1.4 109.00 A Zone
6660 286.5 287.5 0.9 8.74 A Zone
6660* 287.5 288.5 1.1 83.10 A Zone
6660 288.5 289.4 0.9 0.85 A Zone
6660 289.4 290.3 0.9 3.06 A Zone
6660 298.3 298.9 0.6 0.15 A1 Zone
6660* 298.9 300.0 1.1 98.00 A1 Zone
6660 300.0 301.0 1.0 1.48 A1 Zone
* Metallic Sieve Analysis Pending
A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/cf0e2fcd
-3399-41ac-9bdd-93cbf60a83d0
PDF available http://ml.globenewswire.com/Resource/Download/13e3a2e9-68c4-4151-8681-a0988aaf4b65