Spartan Metals' Past Producing Rees Tungsten Mine delivers 6.76% and 8.48% WO3 and Reinforces the Eagle Project's Expanding Tungsten Potential
Spartan Metals' Past Producing Rees Tungsten
Mine delivers 6.76% and 8.48% WO3 and
Reinforces the Eagle Project's Expanding
Tungsten Potential
Vancouver, British Columbia--(Newsfile Corp. - July 7, 2026) - Spartan Metals Corp. (TSXV: W)
(OTCQB: SPRMF) (FSE: J03) ("
Spartan
" or the "
Company
"), an exploration and development
company focused on tungsten in the western United States, is pleased to announce assay results from
recent sampling conducted at its past producing Rees Tungsten Mine ("Rees" or "Mine") located within
the Rees Claims at its 100% owned Eagle Project, Nevada (Figure 1).
Highlights:
Rock chip samples from inside the Mine assayed at
6.76% and 3.75% tungsten trioxide
("WO")
3
, which are among the highest tungsten grades reported at the Eagle Project
Historic United States Bureau of Mines (USBM) sampling
1
from within the Mine returned
8.48%,
1.50%, 0.83%, and 0.83% WO
3
Historic USBM surface sampling
1
at Rees returned
3.40%, 1.80%, and 1.46% WO
3
Historic production records
1
detail approximately
1,306 Short Ton Units (stu) or 1,185 Metric
Ton Units (mtu)
at an average grade of
3.51% WO
3
was shipped in 1954 and 1955
The Rees Tungsten Mine is the third past producing tungsten mine at the Eagle Project where
Spartan has validated reported historic tungsten grades that are in
excess of 1% WO
3
, which
suggests potentially significant tungsten endowment across the Eagle Project
Initial results confirm past producing grades and further support the belief that the Eagle Project
represents one of the highest-grade tungsten districts in the United States
Brett Marsh, Spartan's President and CEO, stated,
"The assay results from within the Rees Tungsten
Mine are particularly exciting as they include some of the highest tungsten grades reported by
Spartan Metals at the Eagle Project to date. Our sampling not only confirms the exceptional tenor of
mineralization observed historically, but also closely aligns with historic United States Bureau of
Mines sampling and documented production records. This independent validation continues to
strengthen our confidence in the quality and reliability of the historical data across the Eagle Project."
Mr. Marsh, continued, "Perhaps most importantly, Rees is now the third past-producing tungsten mine
at Eagle where we have confirmed historic tungsten grades that exceed 1% WO
₃
. When viewed
alongside our recent results from Yellow Jacket and the
newly identified tungsten skarn mineralizatio
n
and
new tungsten-silver veins at Tungstonia
, a compelling picture is emerging of a large and well-
endowed tungsten district with multiple styles of mineralization. We believe these results further
demonstrate the exploration potential of the Eagle Project and reinforce our strategy of evaluating
both historical producers and previously unexplored targets as we continue to advance the Eagle
Project. These grades continue to support our team's interpretation that this project is one of the most
prospective and highest-grade tungsten districts in the United States."
These samples were collected as part of the exploration program announced on
May 21, 2026
and were
taken from within the Rees Mine with approximate locations shown in Figures 2 and 3 with results listed
in Table 1. The Rees Mine was entered with the assistance of mine safety professional from High Desert
Mining ("High Desert") from Salt Lake City, UT. High Desert was engaged to evaluate the Spartan's past
producing mines (Tungstonia, Rees, and Antelope) for potential reopening, which provided Spartan an
opportunity to safely enter the abandoned mine to conduct validation sampling.
Figure 4 shows samples RE-2026-001 and RE-2026-002 under ultraviolet ("UV") light with the scheelite
mineralization fluorescing as blue or bluish white. Figure 5 shows images taken of the mineralized faces
within the mine walls showing pervasive scheelite mineralization. Additional images and videos of the
Rees Tungsten Mine are located on Spartan's website
here
.
Figure 6 shows the Rees Tungsten Mine entrance and an example of remaining underground
infrastructure which is believed to have been operated as recently as the 1980s
2
and could be potentially
reused.
Significance of Assay Results
The Rees Tungsten mine results are particularly notable when viewed in a global tungsten context.
Published geological references commonly cite typical tungsten skarn grades in the range of
approximately 0.3% to 1.4% WO
₃
, with many large porphyry, disseminated, greisen and stratabound
tungsten systems reported at lower average grades, often below 1% WO
₃
3
. By comparison, Spartan's
underground samples at Rees grading 6.76% and 3.75% WO
₃
, historic USBM samples of up to 8.48%
WO
₃
, and documented historic shipments averaging 3.51% WO
₃
highlight the exceptional tenor of
tungsten mineralization present within the Mine. While selected rock samples, historic samples and
historic production records are not necessarily representative of broader mineralization and do not
constitute a Mineral Resource or Mineral Reserve, the repeated confirmation of +1% WO
₃
grades at
Rees, Yellow Jacket and Tungstonia reinforces Spartan's view that the Eagle Project hosts a potentially
significant, district-scale tungsten system with multiple past-producing mines and multiple styles of
mineralization.
Next Steps
Spartan will continue to execute its 2026 exploration program as discussed in the
May 21, 2026
,
announcement including:
Continued surface sampling of soils and rocks - including backpack drilling - over claims acquired
in November 2025 to potentially extend previously identified tungsten, silver, and rubidium soil
anomalies at the Tungstonia.
Continued rock sampling and backpack core drilling at the Rees Claims to cover the past
producing Rees Tungsten and Antelope Mine areas.
Evaluation of a geophysics program for the Rees Claims.
Evaluation of establishing safe entry for all past operating mines at the Eagle Project.
In Process: Ground geophysics surveys at the Tungstonia Claims to inform depths of existing 2+
km tungsten-silver veins and potential tungsten skarn mineralization that is coincident with
tungsten-silver-rubidium soil anomalies and at Yellow Jacket.
Early to mid-August: Approximately 3,000 meters (m) diamond core drilling at high priority targets
identified through surface sampling and geophysics surveys at the Eagle Project.
Table 1 Sample results from Rees Mine with selected USBM samples
1
(widths as reported, true
widths are not yet known)
Sample ID
WO
3
(%)
Ag
(g/t)
Width
(m)
Comments
RE-2026-001
3.75
1.1
-
Rock chip sample in adit from approximately 20m from
mine entrance
RE-2026-002
6.76
1.0
-
Rock chip sample in adit from approximately 30.5m from
lower crosscut entrance approximately 10m vertically below
mine entrance
TG-RK-GA-002
0.75
11.4
-
Grab sample from mine dump near mine entrance
BM 1542
1.80
N/A
1.77
Channel sample at surface
BM 1547
0.72
N/A
0.61
Channel sample at surface
BM 1548
0.69
N/A
0.49
Channel sample at surface
BM 1549
1.46
N/A
0.27
Channel sample at surface
BM 1550
3.40
N/A
0.94
Channel Sample at surface
BM 1551
8.48
N/A
0.55
In adit approximately 4.9m from mine entrance
BM 1552
0.84
N/A
0.55
Near #1 raise approximately 1m from adit floor
BM 1553
1.50
N/A
0.61
From bottom of adit floor below BM 1552
BM 1554
0.83
N/A
0.34
East side of #1 raise about 6.1 m above adit floor
Figure 1
Location map for the Eagle Project showing the Rees and Tungstonia claims
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/12484/304127_331d45ae247cabb6_001full.jpg
Figure 2
The Rees Tungsten mine location within the Rees Claims
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/12484/304127_331d45ae247cabb6_002full.jpg
Figure 3
Rees Tungsten Mine with schematic of underground workings with USBM and approximate
Spartan sample locations. RE-2026-001 was taken from near the Number 1 stope and BM 1443. RE-
2026-002 was taken from with a lower crosscutting adit that terminated approximately 10 m below the
"Portal" noted above.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/12484/304127_331d45ae247cabb6_003full.jpg
Figure 4
Samples RE-2026-001 and RE-2026-002 from within Rees Mine under ultraviolet light (UV)
showing extensive scheelite mineralization (blue/white fluorescence)
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/12484/304127_331d45ae247cabb6_004full.jpg
Figure 5
Images from within Rees Mine under UV light showing scheelite (blue/white fluorescence) in
the adit walls. Each image is approximately 2 m in width across the image.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/12484/304127_331d45ae247cabb6_005full.jpg
Figure 6 Aerial photo of Rees Mine (A) with example of timber infrastructure and chute remaining in
the main adit (B).
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/12484/304127_331d45ae247cabb6_006full.jpg
QA/QC Procedures
Samples were submitted to American Assay Lab (AAL) of Sparks, Nevada, which is a certified and
accredited laboratory, independent of the Company. Samples are prepared using industry standard-
prep methods and analyzed using method IM-4AB52 (52 element suite: 0.5g 4-acid plus boric acid hot
block, ICP-OES + MS plus IO-NFEx [Sodium Peroxide Fusion, ICP-OES] for W over 500ppm). AAL
undertakes its own internal coarse and pulp duplicate analysis to ensure proper sample preparation and
equipment calibration. Spartan's QAQC includes regular insertion of CRM standards, duplicates, and
blanks with a stringent review of results completed by the Company's Qualified Person, Brett R. Marsh,
President and CEO of Spartan Metals.
Qualified Person Statement
The technical information contained in this news release has been prepared under the supervision of,
and approved by Brett R. Marsh, CPG. Mr. Marsh is President and CEO of Spartan Metals Corp. and a
"qualified person" as defined under National Instrument 43-101 -
Standards of Disclosure for Mineral
Projects
.
The Company cautions that production, tonnage, grade and recovery information relating to the historic
Rees Tungsten Mine are considered "historical" in nature and are not supported by a current NI 43-101
compliant technical report. A Qualified Person has not done sufficient work to classify the historical
estimates or production records as current mineral resources or mineral reserves, and Spartan is not
treating these historical estimates as current mineral resources or reserves.
The historical information referenced herein is derived from a United States Bureau of Mines report
1
,
which the Company believes to be reliable, but has not independently verified. While two samples were
collected near those referenced within the report, there has been no systematic exploration and/or
verification work completed by Spartan to date to confirm the historical mining, grade or metallurgical
information reported for these past producing operations.
The references in this news release to historical production, resources, and economic assessments are
provided for context only and should not be interpreted as indicative of the mineralization that may be
present on Spartan's current claims, nor as evidence of the economic viability of the Rees Tungsten
Mine. There is no assurance that Spartan's exploration programs will confirm the presence of
economically mineable mineralization, or that any future resource estimates will reflect similar grades,
tonnages or recoveries to those historically reported.
References
1 Gentry G., G., and Pampeyan E., H., 1955, DMEA 3654 Rees Mining Company Antelope Mining Claims, White Pine County, Nevada
2
https://mrdata.usgs.gov/mrds/show-mrds.php?dep_id=10037285
3 Pitfield, P.E.J. and Brown, T.J. (2011). Tungsten. British Geological Survey, Mineral Commodity Profile, Table 3.
4 Nevada Bureau of Mines and Geology, 1988, Bulletin 105 p213-217
About The Eagle Project
The Eagle Project presents a unique opportunity to delineate one of the largest and highest-grade
Tungsten ("W") and Rubidium ("Rb") districts in the United States. The Project consists of the past-
producing
4
high-grade Tungstonia, Yellow Jacket, and Rees/Antelope tungsten (W-Cu-Ag) mines.
Operations at these mines were from 1915 to 1942 with intermittent small-scale production occurring
until 1956. Tungsten production from these mines totaled 8,379 units at grades between 0.6%-0.9%
WO
3.
The Project is ~36.5 km² in size and located approximately 120 kilometers northeast of the town of Ely,
in the Kern Mountains of White Pine County, Nevada. The Project covers 9,033 acres consisting of 445
Bureau of Land Management (BLM) unpatented lode mining claims.
Three deposit types are present at Eagle; Porphyry, Skarn, and Carbonate Replacement (CRD) that
contain significant or anomalous grades of Tungsten (W), Silver (Ag), and Rubidium (Rb) plus Cu-
Sb±Au-Pb-Zn-Bi-As across three project focus areas that also includes the potential to recover W-Rb-
Ag from the legacy Tungstonia Mill Tailings.
About Spartan Metals Corp.
Spartan Metals is focused on developing critical minerals projects in well-established and stable mining
jurisdictions in the Western United States, with an emphasis on building a portfolio of diverse strategic
defense minerals such as Tungsten, Rubidium, Antimony, Bismuth, and Arsenic.
Spartan's high quality project portfolio includes an option to earn 100% of the Victorio Tungsten-
Molybdenum Project in New Mexico and the 100% owned Eagle Tungsten-Silver-Rubidium Project in
Nevada. Victorio hosts the largest tungsten resource in the United States and contains significant
concentrations of beryllium and fluorspar, while the Eagle Project consists of the highest-grade historic
tungsten resource in the USA which includes significant under-defined resources consisting of: high-
grade silver; rubidium; antimony; bismuth; indium; as well as precious and base metals, and more
information about Spartan Metals can be found at
www.SpartanMetals.com
.
On behalf of the Board of Spartan
"Brett Marsh"
President, CEO & Director
Further Information:
Brett Marsh, M.Sc., MBA, CPG
President, CEO & Director
1-888-535-0325
Jeff Walker
VP, The Howard Group
403-221-0915
Neither the TSX Venture Exchange nor its Regulation Service Provider (as that term is defined
in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or
accuracy of this press release
Forward Looking Statements
This news release contains statements that constitute "forward-looking statements." Such forward
looking statements involve known and unknown risks, uncertainties and other factors that may cause
the Company's actual results, performance or achievements, or developments in the industry to differ
materially from the anticipated results, performance or achievements expressed or implied by such
forward-looking statements. Forward-looking statements are statements that are not historical facts
and are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes,"
"intends," "estimates," "projects," "potential" and similar expressions, or that events or conditions
"will," "would," "may," "could" or "should" occur. Forward-Looking Information in this news release,
Spartan has applied several material assumptions, including, but not limited to, assumptions that: the
current objectives concerning the Company's projects can be achieved and that its other corporate
activities will proceed as expected; that general business and economic conditions will not change in
a materially adverse manner; and that all requisite information will be available in a timely manner.
Although the Company believes the forward-looking information contained in this news release is
reasonable based on information available on the date hereof, by their nature forward-looking
statements involve known and unknown risks, uncertainties and other factors which may cause our
actual results, performance or achievements, or other future events, to be materially different from any
future results, performance or achievements expressed or implied by such forward-looking
statements.
By their nature, these statements involve a variety of assumptions, known and unknown
risks and uncertainties and other factors, which may cause actual results, levels of activity and
achievements to differ materially from those expressed or implied by such statements.
Examples of such assumptions, risks and uncertainties include, without limitation, assumptions, risks
and uncertainties associated with general economic conditions; adverse industry events; future
legislative and regulatory developments; the Company's ability to access sufficient capital from
internal and external sources, and/or inability to access sufficient capital on favorable terms; the
ability of the Company to implement its business strategies; competition; the ability of the Company
to obtain and retain all applicable regulatory and other approvals and other assumptions, risks and
uncertainties.
THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS NEWS RELEASE
REPRESENTS THE EXPECTATIONS OF THE COMPANY AS OF THE DATE OF THIS NEWS
RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE. READERS
SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION AND
SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE THE
COMPANY MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT
ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE WITH APPLICABLE
LAWS.