Vizsla Begins Drilling at Panuco Silver District in Mexico and Outlines 2020 Exploration Plans
Vizsla Begins Drilling at Panuco Silver District
in Mexico and Outlines 2020 Exploration Plans
/NOT FOR DISTRIBUTION TO
UNITED STATES
NEWSWIRE SERVICES OR FOR
DISSEMINATION IN
THE UNITED STATES
/
(VZLA-TSX-V)
VANCOUVER
,
Jan. 9, 2020
/CNW/ -
Vizsla Resources Corp. (TSX-V: VZLA)
("
Vizsla
" or the
"
Company
") is pleased to provide an exploration update and announce that drilling has commenced
on site at the
Panuco
project in
Sinaloa, Mexico
. The Company is targeting nineteen prospects,
initially commencing along the Animas vein corridor. In total, the Company has planned to complete
over 14,500 metres of diamond drilling in 2020.
"
Progressing to drilling is the next step of Vizsla's rapid advancement of the
Panuco
district. The
2020 program builds on the early success in 2019, including sampling six prospects with multi-kilo
silver intercepts in channel samples and raising over
C$6,000,000
to fund the Company's maiden
drilling program.
" President and CEO,
Michael Konnert
stated, "
This program is intended to unlock
the potential of the district that Vizsla has consolidated for the first time in its 450-year history.
"
Vizsla is planning an aggressive exploration program for 2020 with a team of ten geologists and
supporting staff actively mapping and sampling across the district. The Company is currently
completing detailed infill mapping along the Animas vein corridor and this month has commenced
along the Cordon del
Oro
vein corridor.
A drill rig was mobilized to site in late 2019 and drilling will commence at the La Pipa and Mariposa
targets along the Animas corridor for continuation of mineralization beneath known workings. The
program will expand to include first pass drilling at most identified targets over the first half of 2020.
"
Commencing drilling is an exciting step forward for the Company as this discovery phase of the
program will identify the prospects across the project to be the focus of possible resource drilling.
Exploration to date has utilized geochemical sampling, epithermal texture interpretation and
structural targeting to identify nineteen prospects along four of the major vein corridors for drilling
and the Company expects this number to grow as it builds its knowledge of controls on
mineralization within the district.
" Commented Vice President of Exploration,
Charles Funk
.
Previously reported intersections from
Panuco
Vein
Prospect
Location
Width
(m)
Silver
(g/t)
Gold
(g/t)
Silver
Equivalent
(g/t)
Animas
San Carlos
Surface
3.6
690.9
7.00
1,250.5
Incl.
1.6
1,385.0
15.25
2,605.0
San Carlos
Underground
6.0
612.3
5.65
1,064.4
Incl.
3.0
1,120.0
10.50
1,959.6
San Carlos
Underground
4.5
516.7
2.55
721.0
Incl.
3.0
721.0
3.51
1,001.8
Mariposa
Surface
3.0
488.0
3.20
743.6
Incl.
1.5
692.0
4.33
1,038.4
La Pipa
Surface
2.4
343.0
1.77
484.6
Cordon del Oro
San Antonio
Surface
0.5
1,900.0
29.30
4,244.0
San Antonio
Surface
0.4
586.0
7.12
1,155.6
San Antonio
Underground
0.6
516.0
3.83
822.4
Mojocuan 2
Underground
2.0
91.3
8.98
809.3
Cinco Senores
Cinco Señores 3
Surface
1.0
421.0
2.66
633.8
Descubridora
Underground
5.95
548.4
3.97
865.9
And
1.9
981.5
6.13
1,471.8
Incl.
0.6
1,225.0
13.55
2,309.0
El Tajito
Surface
2.5
331.0
2.18
482.2
Incl.
1.5
465.0
3.43
739.4
Napoleon
El Aguaje
Surface
1.4
331.0
5.02
732.6
Los Rieles
Surface
1.5
715.0
4.87
1,104.6
Napoleon 4
Surface
0.9
1,860.0
14.55
3,024.0
Table 1:
Select channel sample results from veins at
Panuco
.
About the
Panuco
project
Vizsla has an option to acquire 100% of the newly-consolidated 9,386.5 Ha Panuco district in
southern
Sinaloa, Mexico
, in the Municipio of Concordia. The option allows for the acquisition of a
mill, mines, tailings facilities, roads, power and permits.
The district contains intermediate to low sulfidation epithermal silver and gold deposits related to
siliceous volcanism and crustal extension in the Oligocene and Miocene. Host rocks are mainly
continental volcanic rocks correlated to the Tarahumara Formation.
Qualified Person
The scientific and technical information in this news release has been prepared in accordance with
the Canadian regulatory requirements set out in National Instrument 43-101 (Standards of Disclosure
for Mineral Projects) and reviewed and approved on behalf of the Company by
Michelle Robinson
,
MASc. P.Eng. a Qualified Person as defined by NI 43-101 (the "
Qualified Person
"). Rock samples
discussed in this News Release were cut across oriented structures using a hammer and chisel onto
a drop-bag. On the drop-bag, samples were crushed to about minus 1 inch between a pair of rock
hammers, then rolled and quartered. Two to four kg of roughly homogenized material was collected
in a double-plastic bag with the sample tag between bags with the number facing outwards. The
bags were then sealed with zip ties. Information including the strike and dip of any structure (right-
hand rule), width in decimeters, host rock type and alteration minerals/assemblages were recorded.
If significant quartz textures and/or sulfides were present, these were noted. Maximum sample
width was 1.5 meters. The samples were packed into rice bags and control samples including field
duplicates, pulp duplicates, standard reference pulps and blanks were inserted into the sample
stream. The samples were stored in a secure building in
Concordia
until enough samples were
collected to form a batch. When a batch was prepared and tagged for shipping, these were sent via
a commercial courier to the ALS sample preparation laboratory in Zacatecas. It is the opinion of the
Qualified Person that the sampling methods, preparation and security are adequate.
ALS has a quality management system that meets all requirements of International Standards
ISO/IEC 17025:2017 and ISO 9001:2015. At ALS, samples were dried, weighed and logged in,
then crushed to 70% passing -2 mm. The sample was then split, and 250 grams were crushed until
more than 85% was smaller than 75 microns. Prepared pulps were sent to the laboratory in
North
Vancouver, Canada
for analysis. A 30 gram charge of the pulp was analyzed for gold using a fire
assay with an AAS finish (Au-AA23). Detection limits for this method are between 0.005 ppm and
10 ppm. Samples with more than 10 ppm gold were re-assayed using a gravimetric finish (Au-
GRA21). Other elements and silver were analyzed using a 0.25 gram charge of pulp digested in 4
acids (ME-ICP61). This method measures silver values between 0.5 and 100 ppm, and base metals
between 2 and 10000 ppm. Samples with more than 100 ppm silver, or more than 10000 ppm Cu,
Pb or Zn were reanalyzed using four acid overlimit methods (OG62). This method has an upper limit
of 1500 ppm for silver. Samples with more than 1500 ppm Ag are re-analyzed using a fire assay of
30 grams of pulp with a gravimetric finish (Ag-GRA21). It is the Qualified Person's opinion that the
analytical procedures used are adequate.
The Qualified Person has checked the blank analyses and certified that no contamination between
samples has occurred. Most gold and silver analyses from the standard pulps are within one
standard deviation of the mean value, and all are within two standard deviations of the mean value.
It is the Qualified Person's opinion that the accuracy of the laboratory analyses is adequate.
Analyses of field and pulp duplicates are mostly within 10%, but some show a larger variation due to
the "nugget effect", a phenomenon where a very small particle of precious metal-rich material can
create a large variance in the assay result.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
SPECIAL NOTE REGARDING FORWARD LOOKING STATEMENTS
This news release includes certain "Forward
Looking Statements" within the meaning of the United
States Private Securities Litigation Reform Act of 1995 and "forward
looking information" under
applicable Canadian securities laws. When used in this news release, the words "anticipate",
"believe", "estimate", "expect", "target", "plan", "forecast", "may", "would", "could", "schedule" and
similar words or expressions, identify forward
looking statements or information. These forward
looking statements or information relate to, among other things: the development of
Panuco
,
including potential drill targets; future mineral exploration, development and production including the
identification of drill targets and commencement of drilling; and completion of a maiden drilling
program
Forward
looking statements and forward
looking information relating to any future mineral
production, liquidity, enhanced value and capital markets profile of Vizsla, future growth potential for
Vizsla and its business, and future exploration plans are based on management's reasonable
assumptions, estimates, expectations, analyses and opinions, which are based on management's
experience and perception of trends, current conditions and expected developments, and other
factors that management believes are relevant and reasonable in the circumstances, but which may
prove to be incorrect. Assumptions have been made regarding, among other things, the price of
silver, gold and other metals; costs of exploration and development; the estimated costs of
development of exploration projects; Vizsla's ability to operate in a safe and effective manner and its
ability to obtain financing on reasonable terms.
These statements reflect Vizsla's respective current views with respect to future events and are
necessarily based upon a number of other assumptions and estimates that, while considered
reasonable by management, are inherently subject to significant business, economic, competitive,
political and social uncertainties and contingencies. Many factors, both known and unknown, could
cause actual results, performance or achievements to be materially different from the results,
performance or achievements that are or may be expressed or implied by such forward
looking
statements or forward-looking information and Vizsla has made assumptions and estimates based
on or related to many of these factors. Such factors include, without limitation: satisfaction or waiver
of all applicable conditions to closing of the Acquisition including, without limitation, receipt of all
necessary approvals or consents and lack of material changes with respect to Vizsla and Canam
and their respective businesses, all as more particularly set forth in the Acquisition agreement; the
synergies expected from the Acquisition not being realized; business integration risks; fluctuations in
general macro
economic conditions; fluctuations in securities markets and the market price of
Vizsla's common shares; and the factors identified under the caption "Risk Factors" in Vizsla's
management discussion and analysis. Readers are cautioned against attributing undue certainty to
forward
looking statements or forward-looking information. Although Vizsla has attempted to identify
important factors that could cause actual results to differ materially, there may be other factors that
cause results not to be anticipated, estimated or intended. Vizsla does not intend, and does not
assume any obligation, to update these forward
looking statements or forward-looking information to
reflect changes in assumptions or changes in circumstances or any other events affecting such
statements or information, other than as required by applicable law.
SOURCE
Vizsla Resources Corp.
View original content to download multimedia:
http://www.newswire.ca/en/releases/archive/January2020/09/c8852.html
%SEDAR: 00045314E
For further information:
For more information and to sign-up to the mailing list, please contact:
Michael Konnert, President and Chief Executive Officer, Tel: (604) 838-4327, Email:
CO: Vizsla Resources Corp.
CNW 10:50e 09-JAN-20