Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

VML.V ·

Viscount Mining Continues to Step Out New Areas of Mineralization Drilling 88.8 g/t Silver Over 16.2 Meters Including 162.1g/t Silver Over 8.5 meters at Silver Cliff Colorado

Drill Results

PRESS RELEASE January 12th, 2022

Viscount Mining Continues to Step Out New Areas of Mineralization

Drilling 88.8 g/t Silver Over 16.2 Meters Including 162.1g/t Silver Over

8.5 meters at Silver Cliff Colorado

VANCOUVER, Canada ( January 1 2th, 202 2) –- Viscount Mining Corp. (TSX -V: VML) ( OTCQX:

VLMGF) (“Viscount” or “the Company”) is pleased to announce step out drill results which further increases

our understanding of the Kate Silver Resource (KSR) and expands the size of the KSR in multiple directions at

Silver Cliff Colorado.

The focus of Viscount Mining’s third phase of drilling was to test the outer boundaries of the Kate Silver

Resource (KSR) as defined in Dr. Gilles Arseneau’s NI43 -101 in 2018. Five of these nine drill holes lie to the

northeast of the previous KSR and should significantly expand the silver resource in this direction. Specifically,

drill hole 21 -16, which lies approximately 120 meters outside of the previous mineralized body definition,

revealed 88.8 g/t silver over 16.2 meters including 8.5 meters testing at 162.1 G/T silver. In all, these five step

out drill holes in the northeast Kate cover a surface area of over 12,500 square meters and successfully expand

the footprint of mineralization outside of the KSR. All holes contain sections testing above the current cut -off

grade (~20 G/T). In addition to northeast expansion, the drilling also revealed slight expansion to the south.

Drill holes 21 -11 and 21- 12 both contain sections testing over 124 G/T and are positioned up to 25 meters

outside of the KSR boundary. The report titled Mineral Resource Estimate for the Silver Cliff Property, Custer

County, Colorado, USA dated April 15, 2018 was prepared by Dr. Gilles Arseneau, Ph.D., P. Geo of Arseneau

Consulting Services (“ACS”) in accordance with the Canadian Institute of Mini ng, Metallurgy and Petroleum

(“CIM”) Definition Standards incorporated by reference in National Instrument 43-101 (“NI 43-101”) for its

Silver Cliff property in Colorado.

Using historic drilling data and recent soil sample results, drill hole locations were selected outside of the KSR

boundary, primarily to the northeast and south. Viscount is pleased to announce that the third phase step out

drill holes exhibited results above cut-off grades. As shown in the map below, this now accounts for nine drill

holes drilled outside of the KSR.

2 of 4

Kate Step Out Drill Holes

Hole ID Interval From (m) To (m) Including

20-07 20.1m at 50.2 G/T 0.0 20.1 5.2m at 59.6 G/T

20-09 6.1m at 88.6 G/T 45.7 51.8 1.5m at 281.0 G/T

20-10 19.5m at 55.0 G/T 0.0 19.5 1.6m at 169 G/T

21-06 9.1m at 33.2 G/T 19.8 28.9 1.5m at 68.4 G/T

21-11 6.1m at 53.8 G/T 26.8 32.9 1.5m at 127.3 G/T

21-12 13.3m at 46.2 G/T 21.0 34.3 1.5m at 124.7 G/T

21-16 8.5m at 162.1 G/T 0.0 8.5 6.1m at 171.0 G/T

21-17 7.6m at 28.7 G/T 9.5 17.1 1.5m at 49.0 G/T

21-18 4.6m at 55.3 G/T 9.4 14.0 1.5m at 86.0 G/T

21-19 10.7m at 36.1 G/T 6.4 17.1 1.8m at 55.4 G/T

Silver Cliff Exploration Manager Jacob Hooker stated , “Not only will these results help expand the silver

resource nearly 200 meters to the northeast, they also have great implications for inexpensive open-pit mining

with most of the mineralization being immediately below the surface.”

3 of 4

The combination of the drilling, soil geochemical surveys and the geophysical survey will allow the exploration

team to have much more data at their disposal to plan the phase four drill program which will begin in the first

quarter of 2022. As Viscount transitions into the fourth phase of the drilling program, we will focus on further

developing zones of high-grade silver deposition throughout the Kate, as well as continue to test the bounds of

the previously defined ore body in promising directions.

Confirmation of results of all our work will be included our next NI -43-101 which will contain an updated

resource calculation in Q2 2022.

Tenneco Minerals leased the Kate property in 1987. They had previous drill data available to them, which was

the results from 11,930 meters in 249 drill holes that had been done since 1968.The following two years Tenneco

drilled an additional 143 holes totaling 7,949 meters. Based on the accumulated data and feasibility study,

Tenneco Minerals made the decision with silver at $5.00 USD an ounce to construct at that time a $35,000,000

USD milling operation for the extractio n of the silver reserves at Silver Cliff. Shortly thereafter Tenneco’s

parent company was sold, and the planned milling operation was abandoned.

Quality Assurance/Quality Control (“QA/QC”) Measures, Chain of Custody:

All Viscount’s drilling to date has been core. The company has implemented a rigorous quality assurance/quality

control program at the Silver Cliff project. Core is retrieved from the drill site to a locked storage facility, where

it is logged and then cut by independent geologists. Half of t he core is bagged, and standards, blanks and

duplicates are frequently inserted in to the sample stream. These are then boxed and then shipped via USPS to

Skyline Labs in Tucson, Arizona. Pulps and rejects will then be retrieved, and stored with the split core at our

locked facility.

Qualified Persons

The scientific and technical information contained in this news release has been reviewed and approved by

Harald Hoegberg PG, an independent consulting geologist who is a "Qualified Person" (QP) as such term i s

defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101").

About Viscount Mining Corp. (TSX VENTURE: VML) (OTCQX: VLMGF)

Viscount Mining Corp. is a project generator and an exploration company with a portfolio of silver and gold

properties in the Western United States, including Silver Cliff in Colorado and Cherry Creek in Nevada.

The Silver Cliff property in Colorado lies within the historic Hardscrabble Silver District in the Wet Mountain

Valley, Custer County, south-central Colorado. It is located 44 miles WSW of Pueblo, Colorado, and has year-

around access by paved road. The property consists of 96 lode claims where high grade silver, gold and base

metal production came from numerous mines during the period 1878 to the early 1900’s. The property

underwent substantial exploration between 1967 and 1984. The property is interpreted to encompass a portion

of a large caldera and highly altered sequence of tertiary rhyolitic flows and fragmental units which offers

potential to host deposits with both precious and base metals. This has been demonstrated in the mineralization

historically extracted from the numerous underground and surface mining operations. Based on the

accumulated data and feasibility study, Tenneco Minerals made the decision with silver at $5.00 USD an ounce

to construct at that time a $35,000,000 USD milling operation for the extraction of the silver reserves at Silver

Cliff. Shortly thereafter Tenneco’s Mining Unit was sold, and the planned milling operation was abandoned.

4 of 4

The Cherry Creek exploration property is in an area commonly known as the Cherry Creek Mining District,

located approximately 50 miles north of the town of Ely, White Pine County, Nevada. Cherry Creek consists of

578 unpatented and 17 patented claims as well as mill rights. Cherry Creek includes more than 20 past producing

mines. In January 2021, Viscount entered into an exploration earn - in agreement with a wholly owned

subsidiary of Centerra Gold Inc. Centerra is a Canadian -based gold mining company focused on operating,

developing, exploring and acquiring gold properties in North America, Asia and other markets worldwide.

For additional information regarding the above noted property and other corporate information, please

visit the Company's website at www.viscountmining.com

ON BEHALF OF THE BOARD OF DIRECTORS

“Jim MacKenzie”

President, CEO and Director

For further information, please contact:

Viscount Investor Relations

Email: [email protected]

THE TSX VENTURE EXCHANGE INC. HAS NEITHER APPROVED NOR DISAPPROVED THE CONTENTS

OF THIS PRESS RELEASE. NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION

SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE

EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.

Forward-Looking Statements

This news release includes certain statements that may be deemed “forward -looking statements” within the meaning

of applicable Canadian securities legislation. Forward -looking statements include, but are not limited to, statements

with respect to Viscount Mining’s operations, exploration and development plans, ex pansion plans, estimates,

expectations, forecasts, objectives, predictions and projections of the future. Specifically, this news release contains

forward looking statements with respect to the Offering, the receipt of required approvals, the timing of thereof and

the amount and use of proceeds therefrom. Generally, forward -looking statements can be identified by the forward -

looking terminology such as “plans”, “expects” or “does not expect”, “is expected”, “budget”, “scheduled”, “estimates”,

“projects”, “intends”, “anticipates”, or “does not anticipate”, or “believes”, or “variations of such words and phrases or

state that certain actions, events or results “may”, “can”, “could”, “would”, “might”, or “will” be taken”, “occur” or “be

achieved”. Forward-looking statements are subject to known and unknown risks, uncertainties and other factors that

may cause the actual results, level of activity, performance or achievements of Viscount Mining to be materially

different from those expressed or implied by such forward-looking statements, including but not limited to: risks related

to the exploration and development and operation of Viscount Mining’s projects, the actual results of current

exploration, development activities, conclusions of economic evaluations, changes in project parameters as plans

continue to be refined, future precious metals prices, as well as those factors discussed in the sections relating to risk

factors of our business filed in Viscount Mining’s required securities filings on SEDAR. Although Viscount Mining has

attempted to identify important factors that could cause results to differ materially from those contained in forward -

looking statements, there may be other factors that cause results to be materially different from those anticipated ,

described, estimated, assessed or intended.

There can be no assurance that any forward -looking statements will prove accurate, as actual results and future events

could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on

forward-looking statements. Viscount Mining does not undertake to update any forward -looking statements that are

incorporated by reference herein, except in accordance with applicable securities laws.