Tower Commences Follow‐up Gold Grain Survey at Rabbit North to Refine Drill Targets
Tower Commences Follow‐up Gold Grain Survey at Rabbit North to Refine Drill Targets
Vancouver, B.C. – October 5, 2021 ‐ Tower Resources Ltd. (“Tower” or the “Company”) (TSXV: TWR) is
pleased to report that it has begun the planned follow‐up till sampling program on the Company’s Rabbit
North porphyry copper‐gold property near Kamloops, British Columbia (Fig. 1).
The objective of the till survey is to develop specific diamond drill targets from the strong gold grain
anomalies that were identified in the heavy mineral fraction of the till in an inaugural survey in May, 2021
(see Tower’s August 28, 2021 press release). These gold grains were glacially liberated about 10,000 years
ago from mineralized zones of the porphyry Cu‐Au type and were then dispersed “down‐ice” (along the
direction of ice flow) to the southeast. The anomalous till would originally have contained many more Cu‐
sulphide grains than gold grains but only the gold grains survived post‐glacial weathering of the till and
can be used to locate the mineralized zones.
The prime target of the present survey is the very strong, 600 grains‐per‐sample gold anomaly in Samples
58 and 59 (Fig. 1). These contiguous samples were collected 200 m apart on a low‐lying till plain overlying
volcanic rocks south of the alkalic Durand Stock which, at higher elevations, contains several outcropping
Cu‐Au showings.
Gold is malleable and most of the grains in Samples 58 and 59 were significantly but not completely
deformed by the ice (Fig. 2) during transport to their present location, suggesting that they are derived
from a single bedrock source and that this source is less than 1 km up‐ice. The gold grains also have a
relatively high fineness (purity) between 880 and 980 (88 to 98% Au, 2 to 12% Ag), a consistency that
further supports derivation of the grains from a single mineralized zone.
The most probable location of the inferred gold source is about 600 m up‐ice (to the northwest; Fig. 1),
near the head of the till plain on which the gold grain anomaly is located. This till‐covered area lies
between the minor Dominic and Buff Cu‐Au showings to the east and west, respectively, and is 300 m
south of and 30 m lower in elevation than the outcropping Chrysocolla Zone. Fourteen samples will be
collected at a spacing of 100 x 200 m to locate the head, or origin, of the gold grain anomaly. These
samples will be processed on a rush basis to guide an initial diamond drill test.
In addition, initial reconnaissance sampling at 200 m spacing on traverses 1 to 1.5 km apart will be
performed in a 4 x 4.5 km area on the Western Extension claims west of the Durand Stock. Approximately
70 samples will be collected over an area of 18 square kilometers, or 4 samples per km2, a density similar
to that of the inaugural till survey.
Historically, only one hole has ever been drilled on the Western Extension. In Tower’s inaugural till survey,
however, consistently elevated levels of gold grains were encountered in the till 5 to 10 km down‐ice on
the Southern Extension claims, suggesting that one or more significant gold sources are present on the
Western Extension. This prospective area is separated from Durand Stock by a late‐tectonic extensional
fault. Importantly, the western fault block appears to have been down‐dropped relative to the eastern
Durand block, thereby preserving the tops of any intrusion‐related hydrothermal systems in addition to
the deeper levels found at Durand.
Methods and Qualified Person
As in the inaugural till survey in May, Overburden Drilling Management Ltd. (ODM) planned and is
executing the till survey and will process the samples for gold grains at its heavy indicator mineral
laboratory in Ottawa, Ontario.
The technical content of this news release has been reviewed and approved by Stuart Averill, P.Geo., a
Director of the Company, Chairman of ODM and a Qualified Person as defined by National Instrument 43‐
101.
About Tower Resources
Tower is a Canadian based mineral exploration company focused on the discovery and advancement of
economic mineral projects in the Americas. The Company’s key exploration assets, both in B.C., are the
Nechako gold‐silver project near Artemis’ Blackwater project and the Rabbit North copper‐gold porphyry
project located between the New Afton and Highland Valley Copper mines.
On behalf of the Board of Directors
Tower Resources Ltd.
Joe Dhami, President and CEO
(778) 996‐4730
www.towerresources.ca
Reader Advisory
This news release may contain statements which constitute “forward‐looking information”, including
statements regarding the plans, intentions, beliefs and current expectations of the Company, its directors,
or its officers with respect to the future business activities of the Company. The words “may”, “would”,
“could”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect” and similar expressions, as
they relate to the Company, or its management, are intended to identify such forward‐looking statements.
Investors are cautioned that any such forward‐looking statements are not guarantees of future business
activities and involve risks and uncertainties, and that the Company’s future business activities may differ
materially from those in the forward‐looking statements as a result of various factors, including, but not
limited to, fluctuations in market prices, successes of the operations of the Company, continued availability
of capital and financing and general economic, market or business conditions. There can be no assurances
that such information will prove accurate and, therefore, readers are advised to rely on their own
evaluation of such uncertainties. The Company does not assume any obligation to update any forward‐
looking information except as required under the applicable securities laws.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of
the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Figure 1 ‐ Gold grain abundance per 10 kg of till over and near the Durand Stock. Sample 060 is a
duplicate of Sample 059 that was collected routinely as part of the quality assurance program.
The area from which the transported gold grains in Samples 058 and 059 are probably sourced
is also shown. The apparent strong anomaly in Sample 093 is inflated because the sample was
collected directly over known mineralization.
Figure 2 ‐ Scanning electron microscope images of six representative gold grains from Sample 59. These
grains display deformational features typical of most of the 540 grains that were recovered
from the sample. The moderate degree of moulding of the originally pristine grains by the ice
during glacial transport suggests a modest transport distance of about 500 m from their
bedrock source.