Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

TWO.V ·

T2 Metals Reports High Grade Polymetallic Drill Results at Its Sherridon Vhms Project , Manitoba

Drill Results

1

T2 METALS REPORTS HIGH GRADE POLYMETALLIC DRILL RESULTS AT ITS

SHERRIDON VHMS PROJECT , MANITOBA

Near Surface High Grade Intersections Include 9.3 m @ 3.09% CuEq

Vancouver, British Columbia – January 25 2024: T2 Metals Corp. (“T2” or the “Company”) (TSX -V:

TWO) (OTCQB: AGLAF) (WKN: A2DR6E) is pleased to announce the first of three sets of assay results from

the 2023 Q4 infill and delineation drill program at the Sherridon Volcanic-Hosted Massive Sulphide (“ VHMS”)

Project (“Sherridon” or the “Project”) in Manitoba. Sherridon is a well-known VHMS camp in the Flin Flon – Snow

Lake Greenstone Belt, with both a significant mining history and substantial copper -rich historical resources (see

Table 4) calculated on behalf of Halo Resources Ltd in 2010. The Project has year-round road access, is 70km from

the mining centre of Flin Flon, and lies upon an operational train line.

The 2023 Q4 drill program was the first completed by T2 Metals at the project, and the first at Sherridon in over a

decade. The program was highly successful, with 10 of a total of 12 holes intersecting intervals with semi-massive

or massive sulphide (Figure 1). Holes were targeted to intersect shallow mineralization within and along strike from

Lost Lake and Cold Lake historical resources. Core from prior drilling has not been recovered.

The first batch of 2023 results includes 4 shallow holes at both the Lost Lake and Cold Lake areas (Figure 2), which

ranged in length from 77 to 134 m. Reported holes tested a total strike length of approximately 365m. The most

significant sulphide-mineralized drill intersections of copper (“Cu”), zinc (“Zn”), gold (“Au”), and silver ("Ag”) are

listed below and provided in Table 2.

Drilling Highlights Include:

Cold Lake

SHN23009

5.74 m grading 1.42% Cu, 1.18% Zn, 0.85 g/t Au and 18.8 g/t Ag (2.63% CuEq) from 34.91m;

SHN23010

5.52 m grading 1.77% Cu, 1.47% Zn, 2.30 g/t Au and 37.2 g/t Ag (4.41% CuEq) from 105.00 m;

Lost Lake

SHN23008

14.4 m grading 0.88% Cu, 2.58% Zn, 0.51 g/t Au and 9.8 g/t Ag (2.16% CuEq) from 49.38 m, including

2.75 m grading 3.34% Cu, 6.00% Zn, 1.92 g/t Au and 33.2 g/t Ag (6.99% CuEq) from 49.38 m;

SHN23011

14.5 m grading 0.92% Cu, 2.82% Zn, 0.78 g/t Au and 13.8 g/t Ag (2.52% CuEq) from 39.00 m, including

9.28 m grading 0.85% Cu, 4.01% Zn, 1.08 g/t Au and 17.6 g/t Ag (3.09% CuEq) from 44.22 m;

SHN23012

Hole stopped prior to target horizon;

2

Notes:

Copper equivalents calculated using current metal prices (Cu $/t = 8,174; Pb $/t = 2,032; Zn = 2,487 $/t; Au = 2,020 $/oz; Ag = 22.7 $/oz)

and assume equal recovery of all elements. The formula used to calculate CuEq. = Cu(%) + ((Zn(%) * Zn(USD/t)) + (Pb(%) * Pb(USD/t)) + (Ag(g/t) *

(Ag(USD/oz)/31.1) * 100) + (Au(g/t) * (Au(USD/oz)/31.1) * 100)) / Cu(USD/t) The formula used to calculate ZnEq. = Zn(%) + ((Cu(%) * Cu(USD/t)) + (Pb(%)

* Pb(USD/t)) + (Ag(g/t) * (Ag(USD/oz)/31.1) * 100) + (Au(g/t) * (Au(USD/oz)/31.1) * 100)) / Zn(USD/t)

“Reported drill intercepts are downhole core lengths with true thickness estimated to be at least 90% of core downhole length.”

Mark Saxon, CEO of T2 Metals Corp. said " We are very pleased with these first drill results from the Sherridon

drilling program. Having never seen the mineralization in core before, it has been very informative for our geologists

to see the high copper-zinc grades that can develop. Of particular note are the high gold grades, significantly above

those previously identified in the massive sulphide mineralization at Sherridon, probably due to improved analytical

methods vs past explorers. We feel confident that our ongoing exploration can improve the size and grade of the

Cold Lake and Lost Lake historic resources.”

Jim Pickell, geological consultant for T2 Metals, commented, “ After contributing to the discovery of several VHMS

deposits within the Flin Flon – Snow Lake Greenstone Belt, I am thrilled to be supporting the T2 Metals team and

apply knowledge gained to the analogous and relatively sparsely explored Sherridon area. From what I’ve seen to

date, I’m optimistic that the currently defined historic mineral resources can be extended, and entirely new VHMS

deposits can be discovered.

The strong regional metamorphism in the Sherridon area has created coarser grain ed sulphide mineralization,

potentially enabling simpler metallurgy. Furthermore, the metamorphism has converted non-conductive pyrite into

highly conductive pyrrhotite that can be much more readily detected by conventional geophysical systems. T he

elevated gold credits noted in the drilling certainly provide another valuable contribution to overall attractiveness

of the project.”

Figure 1. Mineralization textures (copper-zinc) from Sherridon drill program, 2023.

3

Figure 2: Cold and Lost Prospects, Sherridon, with Drill Hole Locations

Twelve holes for a total of 1,500 metres were completed, testing a total strike length of 1,420 metres within and

between the Cold Lake and Lost Lake Deposits. These two deposits occur along a VHMS horizon that is both parallel

to and normally less than 850 metres perpendicular to the VHMS horizon that hosts Sherritt Gordon ’s historic

Sherridon East and Sherridon West Mines, where 7.74 million tonnes were mined at an average grade of

2.46% Cu, 2.84% Zn, 0.6 g/t Au and 33 g/t Ag (Goetz & Froese, 1981) between 1931 and 1951.

The Lost Lake and Cold Lake zones comprise a continuously mineralized horizon over a known strike length of

approximately 1.8 km. The Lost and Cold prospects were the subject of investment by HudBay Minerals Inc from

2009 – 2012 that included metallurgical drilling with a view to open pit mining and subsequent processing in Flin

Flon.

Assay results confirm the visual identification of semi and massive sulph ide in the core and logging (see Press

Release dated November 1, 2023). The results delineate shallow-dipping and plunging massive sulphide lenses and

extend historical drilling results by the previous explorers. It is also important to note that the while the Sherridon

area is spatially and genetically associated with the prolific Paleoproterozoic Flin Flon - Snow Lake Greenstone Belt

(“FFSLGB”), it has been under -explored despite the abundance of highly prospective felsic volcanic rocks , which

host almost all of the historic VHMS resources in the FFSLGB, the widespread precious and base metal endowment.

Drilling results further refine and delineate the mineralized body geometry, structure and grade. Information from

this drill program, plus camp-scale compilation work further demonstrates the strong regional flat southeasterly

plunge controls and robust footwall alteration vectoring features.

The company is incorporating 2023 results including lithogeochemistry into its 3-D geological model to complete

interpretation/analysis. Many geophysical follow-up opportunities and key VHMS-associated structural controls exist

at Sherridon which provides additional high -value targets for planned 2024 drill programs. Cold Lake, Lost Lake

and other historic resource areas as being considered for drill testing in 2024. Cross sections will be provided

during Q1 2024 when all drill data is to hand.

4

VHMS Type Deposits

VHMS deposits are attractive high-value exploration targets that sustain much of the world’s supply of zinc, copper

and silver and in addition are a major source of critical “high tech” metals germanium and indium. They typically

occur in districts or “camps” comprised of numerous deposits of various sizes. They can be very high grade and

are regularly gold enriched , with large very long -life deposits being “company -makers” (eg the founding of Rio

Tinto). Longer-life mining operations tend to show total production exceeding the original pre-mining size by more

than three times.

VHMS deposits can be discovered with conventional geophysical methods . Most deposits have simple sulphide

mineralogy that is amenable to processing and high recovery.

Project Location Owner Market Cap (CA$)

McIlvenna Bay Saskatchewan, Canada Foran Mining Corp $1,050.0 m

Green Bay (Ming) Newfoundland, Canada FireFly Metals Ltd $155.8 m

Palmer+ Alaska, USA American Pacific Mining Corp $59.5 m

B26 Quebec, Canada Abitibi Metals Corp $45.6 m

Great Burnt Newfoundland, Canada Benton Resources Inc $32.0 m

Pine Bay Manitoba, Canada Callinex Mines Inc $25.3 m

Pickett Mountain Maine, USA Wolfden Resources Corp $10.7 m

BMK Saskatchewan, Canada Murchison Minerals Ltd $7.9 m

Table 1: Notable North American VHMS Deposits with Active Exploration

Sampling Procedures and Quality Assurance (QA) / Quality Control (QC)

The Company's QA/QC drill core sample protocol consists of collection of samples over a minimum 0.3 m interval

to a maximum 1.4 m interval (depending on the lithology and style of mineralization) over the mineralized portions

of the drillhole. The drill core sample is cut in half with a diamond saw, with half of the core placed in individual

sealed polyurethane bags and the remaining half securely retained in the original core box for permanent storage.

Drill core samples are shipped by transport truck in sealed woven plastic bags to Bureau Vertias Minerals Analytical

Lab preparation facility in Timmins, ON for sample preparation. Sample analysis was carried out at Bureau Veritas

Minerals laboratory in Vancouver, BC.

Gold was determined by Bureau Veritas method FA430, a lead fire-assay fusion of a 30 g pulverized sample with a

atomic absorption spectroscopy (AAS) finish. Various metals including silver, gold, copper, lead and zinc were

determined by inductively-coupled plasma atomic emission spectroscopy (ICP -AES) or inductively-coupled plasma

mass spectroscopy (ICP -MS), following multi -acid digestion (Bureau Veritas method MA270). This method is

considered an assay method with a precision of 5% for elements including c opper, lead, zinc and silver. Select

samples were analysed for gallium (Ga) and germanium (Ge) and concentrations were determined using a

hydrofluoric and aqua regia digest, followed by an ICP-MS finish.

HOLE_ID FROM TO Interval Cu Zn Pb Au Ag CuEq ZnEq

(m) (m) (m) % % % g/t g/t % %

SHN23008 49.38 63.78 14.40 0.88 2.58 0.02 0.51 9.85 2.16 7.11

Including 49.38 52.13 2.75 3.34 6.00 0.01 1.92 33.23 6.99 22.95

SHN23009 34.91 40.65 5.74 1.42 1.18 0.03 0.85 18.85 2.63 8.65

SHN23010 105.00 110.52 5.52 1.77 1.47 0.09 2.30 37.22 4.41 14.50

SHN23011 39.00 53.50 14.50 0.92 2.82 0.04 0.78 13.76 2.52 11.50

Including 44.22 53.50 9.28 0.85 4.01 0.07 1.08 17.57 3.09 10.20

Table 2: Assay Results From Batch 1, Cold and Lost Prospects, Sherridon

5

HOLE_ID EAST NORTH RL DEPTH INCLINATION AZIMUTH

SHN23001 367008 6111502 328 134.0 -45 220

SHN23002 367060 6111471 312 125.0 -55 220

SHN23003 367093 6111332 328 86.0 -52 220

SHN23004 367114 6111350 328 125.0 -50 220

SHN23005 367298 6111117 320 164.0 -45 220

SHN23006 367378 6111198 321 179.0 -45 220

SHN23007 367287 6111193 320 125.0 -45 220

SHN23008 366969 6111496 320 134.0 -60 220

SHN23009 366374 6112179 325 104.0 -45 220

SHN23010 366421 6112228 325 131.0 -55 220

SHN23011 367255 6111149 333 77.0 -45 220

SHN23012 367317 6111224 330 116.0 -52 220

Table 3: T2 Metals Drill Coordinates, 2023 (Coordinates given in UTM Zone 14N, NAD83).

SHERRIDON PROJECT – INDICATED RESOURCES (2010)

Mining Method Million

Tonnes Cu (% ) Zn (% ) Au (g/t) Ag (g/t) Copper

(M lbs)

Zinc

(M lbs)

Gold

(oz)

Silver

(oz)

Open Pit 5.32 0.8 1.23 0.34 7.2

Underground 1.24 1.04 1.18 0.48 8.2

Total Indicated 6.55 0.85 1.22 0.37 7.4 122.1 M lb 176.3 M lb 77,192 oz 1.56 M oz

SHERRIDON PROJECT – INFERRED RESOURCES (2010)

Open Pit 12.24 0.62 0.77 0.26 5.3

Underground 3.62 0.91 1.08 0.32 7.4

Total Inferred 15.86 0.69 0.84 0.28 5.8 239.9 M lb 294.0 M lb 141,245 oz 2.94 M oz

Indicated and Inferred resources for Bob, Lost, Cold, and Jungle deposits. Mineral Resource estimates are based upon Bloom, L., Healy, T., Giroux, G., Halo

Resources Ltd. 2010, Sherridon VMS Property, Technical Report NI43-101 – November 22, 2010, which is available at www.sedar.com.

Mineral Resources were estimated at a net smelter return (NSR) cut-off of US$20 per tonne and US$45 per tonne for open pit and underground

respectively. Metal prices used were US$3.00/lb copper, US$1.05/lb zinc, US$1,000/oz gold and US$15.00/oz silver. Metallurgical recovery factors

assumed were 92% for copper, 83% for zinc, 65% for gold and 57% for silver.

The Mineral Resource estimates were prepared under the direction of, and dated and signed by, a Qualified Person as defined in accordance with NI 43-101

and CIM Definition Standards. The data, information, estimates, conclusions and recommendations were consistent with the information available at the

time of preparation. The terms “mineral resource”, “measured mineral resource”, “indicated mineral resource” and “inferred mineral resource” are defined

in NI 43-101 and recognized by Canadian securities laws. Investors are cautioned not to assume that any part or all of mineral deposits in these categories

will ever be upgraded to mineral reserves. Aguila has received the exploration and drilling data, but has not independently confirmed the Mineral Resource

estimates. Halo has indicated that no Mineral Resource estimates were completed subsequent to those provided in Table 1.

Table 4: Sherridon Historical Resource Estimate, 2010

The qualified person for the Company's projects, Mr. Mark Saxon, the Company’s Chief Executive Officer, a Fellow of the

Australasian Institute of Mining and Metallurgy and a Member of the Australian Institute of Geoscientists, has reviewed and

approved the contents of this release.

6

About T2 Metals Corp (TSX.V: TWO) (OTC: AGLAF) (WKN: A2DR6E)

T2 Metals Corp is an emerging copper and precious metal company enhancing shareholder value through

exploration and discovery. The Company continues to target under -explored areas, including the Sherridon, Lida ,

Cora and Copper Eagle projects where post-mineralization cover masks areas of high geological prospectivity in the

vicinity of major mines.

ON BEHALF OF THE BOARD,

“Mark Saxon”

Mark Saxon

President & CEO

For further information, please contact:

t2metals.com

1305 – 1090 West Georgia St., Vancouver, BC, V6E 3V7

[email protected]

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of

the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Cautionary Note Regarding Forward -Looking Statements

Certain information set out in this news release constitutes forward -looking information. Forward looking

statements are often, but not always, identified by the use of words such as "seek", "anticipate”, "plan", "continue”,

"estimate”, "expect", "may”, "will", "intend", "could", "might", "should", "believe" and similar expressions. Forward-

looking statements are based upon the opinions and expectations of management of the Company as at the

effective date of such statements and, in certain cases, informati on provided or disseminated by third parties.

Although the Company believes that the expectations reflected in forward -looking statements are based upon

reasonable assumptions, and that information obtained from third party sources is reliable, they can gi ve no

assurance that those expectations will prove to have been correct. Readers are cautioned not to place undue

reliance on forward-looking statements.

These forward-looking statements are subject to a number of risks and uncertainties. Actual results may differ

materially from results contemplated by the forward-looking statements. Accordingly, the actual events may differ

materially from those projected in the forward -looking statements. Such risks include uncertainties relating to

exploration activities. When relying on forward-looking statements to make decisions, investors and others should

carefully consider the foregoing factors and other uncertaint ies and should not place undue reliance on such

forward-looking statements. The Company does not undertake to update any forward -looking statements, except

as may be required by applicable securities laws.