Talisker Reports Mustang Underground Face Sample Results Defining a 79-metre Strike Length High-grade Shoot Averaging 64.8 g/t on the 1030 Level
Talisker Resources Ltd.
120 Adelaide Street West, Suite 900
Toronto, Ontario M5H 1T1
TSK
TSKFF
TSX OTCQB
Talisker Reports Mustang Underground Face Sample Results
Defining a 79-metre Strike Length High-grade Shoot
Averaging 64.8 g/t on the 1030 Level
Toronto, Ontario, September 9, 2026 – Talisker Resources Ltd. (“Talisker” or the “Company”) (TSX:TSK |
OTCQB:TSKFF) is pleased to report continued success from underground development on the 1030 Level
at the Mustang Mine, where the Company has successfully developed on a continuous 79 -metre strike
length of high -grade gold mineralization along the BK Vein. The zone com prises a well- defined banded
quartz vein averaging 64.84 grams per tonne (g/t) gold across an average true width of 0.50 metres. These
encouraging results extend the high-grade ore shoot from the 1045 Level, reported on April 15, 2026, and
provide further validation of Talisker's geological model, with continued demonstrat ion of increasing
grade and improved continuity of mineralized structures with depth within the Mustang Mine at the
Bralorne Gold Project, British Columbia, Canada.
Key Highlights:
• 496 g/t over 0.51 m within 156.97 g/t over 1.64 m from 1030 BK Vein, East Face No. 16
• 203 g/t over 0.54 m within 100.81 g/t over 1.09 m from 1030 BK Vein, East Face No. 18
• 167 g/t over 0.48 m within 61.27 g/t over 1.31 m from 1030 BK Vein, East Face No. 17
• 147 g/t over 0.35 m within 51.16 g/t over 1.21 m from 1030 BK Vein, East Face No. 22
• 114 g/t over 0.43 m within 43.58 g/t over 1.14 m from 1030 BK Vein, East Face No. 19
• 112 g/t over 0.47 m within 24.36 g/t over 2.39 m from 1030 BK Vein, East Face No. 28
• 74.7 g/t over 0.47 m within 37.53 g/t over 1.98 m from 1030 BK Vein, East Face No. 23
• 37.2 g/t over 0.80 m within 20.98 g/t over 1.50 m from 1030 BK Vein, East Face No. 28
Terry Harbort, CEO of Talisker commented, “ These outstanding results from a well -defined ore shoot
along the BK Vein demonstrate the remarkable structural and grade continuity of the auriferous quartz -
vein systems across the Mustang Mine. With the BK structure delineated by diamond drilling over mo re
than 750 metres of strike and remaining open beyond 500 metres depth, we see significant potential to
extend known ore shoots and delineate additional high-grade shoots as mining advances. We look
forward to re porting further results from our continued mining development and drilling at
the Bralorne Gold Project.”
2
Bralorne Gold Project
Mustang Mine – 1030 Lateral Development
Assay Results
Face Name From
(m)
To
(m)
Interval
(m)
Au
(g/t) Sample #
M1030_BK_OD_E1_F3 0 0.8 0.8 37.2 X003456
M1030_BK_OD_E1_F3 0.8 1.5 0.7 2.44 X003457
M1030_BK_OD_E1_F3 1.5 2.37 0.87 0.62 X003458
M1030_BK_OD_E1_F3 2.37 3.21 0.84 0.01 X003459
M1030_BK_OD_E1_F16 0 0.99 0.99 0.09 X003758
M1030_BK_OD_E1_F16 0.99 1.4 0.41 10.5 X003759
M1030_BK_OD_E1_F16 1.4 1.91 0.51 496 X003761
M1030_BK_OD_E1_F16 1.91 2.63 0.72 0.23 X003762
M1030_BK_OD_E1_F16 2.63 3.43 0.8 0.08 X003763
M1030_BK_OD_E1_F17 0 1.08 1.08 0.03 X003785
M1030_BK_OD_E1_F17 1.08 1.56 0.48 167 X003786
M1030_BK_OD_E1_F17 1.56 2.39 0.83 0.12 X003787
M1030_BK_OD_E1_F17 2.39 3.19 0.8 0.05 X003788
M1030_BK_OD_E1_F18 0 0.81 0.81 0.97 X003814
M1030_BK_OD_E1_F18 0.81 1.36 0.55 0.47 X003815
M1030_BK_OD_E1_F18 1.36 1.9 0.54 203 X003816
M1030_BK_OD_E1_F18 1.9 3.33 1.43 5.56 X003817
M1030_BK_OD_E1_F19 0 0.5 0.5 0.01 X003829
M1030_BK_OD_E1_F19 0.5 1.42 0.92 0.005 X003831
M1030_BK_OD_E1_F19 1.42 1.78 0.36 0.37 X003832
M1030_BK_OD_E1_F19 1.78 2.21 0.43 114 X003833
M1030_BK_OD_E1_F19 2.21 2.56 0.35 1.5 X003834
M1030_BK_OD_E1_F19 2.56 3.52 0.96 0.09 X003835
M1030_BK_OD_E1_F22 0 0.86 0.86 0.04 X003903
M1030_BK_OD_E1_F22 0.86 1.29 0.43 20.1 X003904
M1030_BK_OD_E1_F22 1.29 1.64 0.35 147 X003905
M1030_BK_OD_E1_F22 1.64 2.07 0.43 4.22 X003906
M1030_BK_OD_E1_F22 2.07 3.46 1.39 0.09 X003907
M1030_BK_OD_E1_F23 0 0.92 0.92 41.2 X003915
M1030_BK_OD_E1_F23 0.92 1.39 0.47 74.7 X003916
M1030_BK_OD_E1_F23 1.39 1.98 0.59 2.2 X003917
M1030_BK_OD_E1_F23 1.98 2.93 0.95 0.26 X003918
M1030_BK_OD_E1_F23 2.93 3.86 0.93 0.37 X003919
M1030_BK_OD_E1_F28 0 0.85 0.85 0.97 X004118
M1030_BK_OD_E1_F28 0.85 1.32 0.47 112 X004119
M1030_BK_OD_E1_F28 1.32 1.93 0.61 2.35 X004121
M1030_BK_OD_E1_F28 1.93 3.24 1.31 3.17 X004122
*Estimated true widths are between 90% and 100% of interval lengths.
3
Bralorne Gold Project – Chip Collar Locations Table (values rounded to nearest metre)
Face Name UTM Easting UTM Northing Elevation
(m)
M1030_BK_OD_E1_F3 5625457 513383 1031.44
M1030_BK_OD_E1_F16 5625456 513422 1032.45
M1030_BK_OD_E1_F17 5625456 513425 1032.05
M1030_BK_OD_E1_F18 5625456 513428 1032.08
M1030_BK_OD_E1_F19 5625457 513431 1032.43
M1030_BK_OD_E1_F22 5625455 513438 1031.83
M1030_BK_OD_E1_F23 5625454 513441 1032.17
M1030_BK_OD_E1_F28 5625452 513457 1033.29
Bralorne Gold Project – Chip Collar Orientations
Face Name Azimuth
(°)
Dip
(°)
Total Length
(m)
M1030_BK_OD_E1_F3 166 0 3.21
M1030_BK_OD_E1_F16 183 0 3.43
M1030_BK_OD_E1_F17 181.5 0 3.19
M1030_BK_OD_E1_F18 181 0 3.33
M1030_BK_OD_E1_F19 175 0 3.52
M1030_BK_OD_E1_F22 195 0 3.46
M1030_BK_OD_E1_F23 192 0 3.86
M1030_BK_OD_E1_F28 188 0 3.24
For further information, please contact:
Lindsay Dunlop
Vice President, Investor Relations
📞📞 +1 647 274 8975
Qualified Person
The technical information contained in this news release has been reviewed and approved by Patrick
Weaver, P.Geo., Talisker’s Chief Production Geologist, who is a Qualified Person as defined under
Canadian National Instrument 43 -101, Standards of Disclosure for Mineral Projects. Mr. Weaver is not
independent of the Company in accordance with NI 43-101.
About Talisker Resources Ltd.
Talisker (taliskerresources.com) is a junior resource company involved in the exploration and
development of gold projects in British Columbia, Canada. Talisker’s flagship asset is the high-grade, fully
permitted Bralorne Gold Project where the Company is producing at the Mustang Mine. Talisker projects
also include the Ladner Gold Project, an historic high -grade gold mine near Hope, British Columbia, with
significant exploration potential, and the Spences Bridge Project, where the Company has a significant
landholding in the emerging Spences Bridge Gold Belt, as well as several other early -stage Greenfields
projects.
4
Sample Preparation and QAQC
Chip sampling of underground ore headings at the Bralorne Gold Project is conducted by geologists using
industry standard practices to sample across a horizontal 5 cm × 5 cm × up to 3.0 m zone across the entire
face of the drift at a height of approximately 1.2 m above the sill/floor. Under the current protocol,
individual chip samples range from 0.35 m to 1.50 m in length and are selected to best represent identified
geological structures, sulphide mineralization, or hydrothermal alteration suspected to bracket gold
concentrations. Where vein or mineralized zones are wide, consecutive samples are collected across the
structure to preserve geological resolution. Lithological breaks are avoided within a single sample
wherever possible.
Quality assurance and quality control (QAQC) procedures include regular insertion of certified reference
materials, blanks, and field duplicates into the sample stream at a rate of approximately 9% of total
samples in this release.
All preparation and analytical work is performed by Activation Laboratories Ltd. (Actlabs) in Kamloops,
British Columbia, Canada. Sample preparation follows Actlabs code RX1, involving crushing the entire
sample (<7 kg) to at least 80% passing 2 mm, riffle splitting to obtain a 250 g sub-sample, and pulverizing
(mild steel) to a minimum of 95% passing 105 µm. Actlabs code RX17 is also completed to determine pulp
specific gravity. Crushing and pulverizing quality is monitored through Actlabs’ internal QAQC protocols.
Gold is analyzed by fire assay with an atomic absorption spectroscopy (AAS) finish (Actlabs code 1A2 -50
ORE), in which a 50 g pulp is fused with fire assay fluxes, preheated at 850 °C, heated further at 950 °C,
and finished at 1,060 °C over a 60 -minute fusion cycle. The resulting lead button is cupelled at 950 °C to
produce a doré bead containing Au and Ag, which is then dissolved in aqua regia and analyzed by AAS.
This method has a detection range of 0.01 to 100 g/t Au.
Samples returning gold grades of ≥100 g/t Au are re-analyzed by fire assay with gravimetric finish (Actlabs
code 1A3-50). In this process, gold is separated from silver in the doré bead by parting with nitric acid,
and the gold residue is weighed gravimetr ically on a microbalance. The 1A3 -50 method has a detection
range of 0.02 to 10,000 g/t Au.
Caution Regarding Forward Looking Statements
Certain statements contained in this press release constitute forward -looking information. The use of any of
the words “could”, “intend”, “expect”, “believe”, “will”, “projected”, “estimated” and similar expressions and
statements relating to matters that are not historical facts are intended to identify forward-looking information
and are based on Talisker’s current belief or assumptions as to the outcome and timing of such future events.
Various assumptions or factors are typically applied in drawing conc lusions or making the forecasts or
projections set out in forward -looking information. Those assumptions and factors are based on information
currently available to Talisker. Although such statements are based on reasonable assumptions of Talisker’s
management, there can be no assurance that any conclusions or forecasts will prove to be accurate.
Forward looking information involves known and unknown risks, uncertainties and other factors which may
cause the actual results, performance, or achievements to be materially different from any future results,
performance or achievements expressed or implied by the forward-looking information. Such factors include
risks inherent in the exploration and development of mineral deposits, including risks relating to changes in
project parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates,
risks relating to changes in mineral prices and the worldwide demand for and supply of minerals, risks related
to increased competition and current global financial conditions, access and supply risks, reliance on key
personnel, operational risks, regulatory risks, including risks relating to the acquisition of the necessary licenses
5
and permits, financing, capitalization and liquidity risks, title and environmental risks and risks relating to the
failure to receive all requisite shareholder and regulatory approvals.
The forward-looking information contained in this release is made as of the date hereof, and Talisker is not
obligated to update or revise any forward-looking information, whether as a result of new information, future
events or otherwise, except as requir ed by applicable securities laws. Because of the risks, uncertainties and
assumptions contained herein, investors should not place undue reliance on forward-looking information. The
foregoing statements expressly qualify any forward-looking information contained herein.
Figure 1: Bralorne Gold Project – Location Map
6
Figure 2: Mustang Mine plan view of 1030 level lateral development.
Figure 3: Face sample from 1030 level BK Vein east face No. 3.
7
Figure 4: Face sample from 1030 level BK Vein east face No. 16.
8
Figure 5: Face sample from 1030 level BK Vein east face No. 17.