Talisker Intercepts High Grade Results from Unexplored Historic Gap Between Bralorne an Pioneer Extending the 77 Vein
Talisker Intercepts High Grade Results from
Unexplored Historic Gap Between Bralorne an
Pioneer Extending the 77 Vein
TORONTO
,
Nov. 22, 2021
/CNW/ - Talisker Resources Ltd. ("
Talisker
" or the "
Company
") (TSX:
TSK) (OTCQX: TSKFF) is pleased to announce high grade results from drill hole SB-2021-075
highlighted by
81.09 g/t Au over 1.25 metres on the 77 Vein
at its 100% owned flagship Bralorne
Gold Project.
Key Points:
The 77 Vein was intersected between 373.75-375.0 metres highlighted by 81.09 g/t Au over
1.25 metres.
Hole SB-2021-075 increases the total intercepts on the 77 Vein to 11.
The 77 Vein was the most productive and high grade vein on the Project, historically averaging
17.7g/t Au and was mined to a depth of 1.9 kilometres.
The 52 Vein was intersected between 456.0 and 457.20 metres highlighted by 13.86 g/t Au
over 1.20 metres.
Hole SB-2021-075 increases the total intercepts on the 52 Vein to 11.
The 52 Vein Splay was intersected between 474.55 and 475.55 metres, highlighted by 12.87
g/t Au over 1.0 metre.
Two shallow zones of low grade bulk-tonnage were defined, returning 0.56 g/t Au over 51.5
metres (236.40 and 287.90 metres depth) and 0.43 g/t Au over 32.2 metres (325.30 and
357.50 metres depth).
Terry Harbort
, President and CEO of Talisker commented, "Hole 075 demonstrates the excellent
continuity of the 77 Vein increasing the strike to 1,100 metres from historic workings."
Six diamond drills and 1 RC drill are currently operating at the Bralorne Gold Project. A total of
77,150 metres consisting of 148 holes of a planned and fully funded 100,000 metre program has
been drilled at the Project this year with a total of 97,464 metres (179 holes) since Talisker initiated
drilling in
February 2020
. There are 54 holes consisting of 17,366 samples are currently at the
assay laboratory and are expected to be received by the Company shortly.
SB-2021-075 Hole Description
Complete results have been received for this hole.
Located in the Bralorne East block and centrally located within the granitic intrusive.
Intersected granitic intrusive from surface to 356 metres followed by diorite to 831 metres, then
granitic intrusive to 925 metres followed by sheared ultramafic rocks within the Cadwallader
fault to completion at 961.9 metres.
Bulk mineralization related to the 51BFW Vein intersected from 236.40 to 287.90 metres.
Bulk mineralization related to newly discovered veins in the hanging wall of the 77 Vein from
325.30 to 357.50 metres.
77 Vein intersected from 373.75 to 375 metres with visible gold.
52 Vein intersected from 456.0 to 457.20 metres with visible gold.
52 Vein Splay intersected from 474.55 to 475.55 metres with visible gold.
Bulk mineralization related to the 222 Vein intersected from 616.75 to 630.45 metres with visible
gold.
Major vein structures intersected are considered classic Bralorne crack-seal quartz-carbonate
veins with densely banded sulphide septae hosting fine-grained arsenopyrite and pyrite
mineralization with strong silica-sericite alteration halos.
Zones of bulk mineralization are hosted in both the granitic intrusive and diorite as zones of
increased veinlet density associated with strong silica-sericite alteration and disseminated
pyrite-arsenopyrite mineralization.
Table 1: Bralorne Gold Project - Drill Hole SB-2021-075
Diamond Drill
Hole Name
From
(m)
To
(m)
Interval
(m)
Au
(g/t)
Zone
Method Reported
SB-2021-075
236.4
237.2
0.8
0.78
New Bulk
Zone
Au-AA26
SB-2021-075
237.2
238.1
0.9
0.09
Au-AA26
SB-2021-075
238.1
239.3
1.2
0.22
Au-AA26
SB-2021-075
239.3
240.45
1.15
0.04
Au-AA26
SB-2021-075
240.45
241
0.55
4.39
Au-AA26
SB-2021-075
241
241.6
0.6
0.66
Au-AA26
SB-2021-075
241.6
242.2
0.6
1.07
Au-AA26
SB-2021-075
242.2
243.1
0.9
0.56
Au-AA26
SB-2021-075
243.1
244.5
1.4
0.60
Au-AA26
SB-2021-075
244.5
245.9
1.4
0.09
Au-AA26
SB-2021-075
245.9
247.35
1.45
0.02
Au-AA26
SB-2021-075
247.35
248.8
1.45
0.02
Au-AA26
SB-2021-075
248.8
250
1.2
0.17
Au-AA26
SB-2021-075
250
251.35
1.35
0.11
Au-AA26
SB-2021-075
251.35
252.7
1.35
0.23
Au-AA26
SB-2021-075
252.7
253.9
1.2
0.38
Au-AA26
SB-2021-075
253.9
255.2
1.3
0.01
Au-AA26
SB-2021-075
255.2
256.35
1.15
0.22
Au-AA26
SB-2021-075
256.35
257.1
0.75
0.05
Au-AA26
SB-2021-075
257.1
258.5
1.4
0.29
Au-AA26
SB-2021-075
258.5
260
1.5
0.15
Au-AA26
SB-2021-075
260
261.45
1.45
0.07
Au-AA26
SB-2021-075
261.45
262.65
1.2
0.54
Au-AA26
SB-2021-075
262.65
263.6
0.95
3.13
Au-AA26
SB-2021-075
263.6
264.6
1
5.05
Au-AA26
SB-2021-075
264.6
265.9
1.3
0.04
Au-AA26
SB-2021-075
265.9
267.2
1.3
0.08
Au-AA26
SB-2021-075
267.2
268.15
0.95
0.29
Au-AA26
SB-2021-075
268.15
269.1
0.95
0.30
Au-AA26
SB-2021-075
269.1
270.3
1.2
1.04
Au-AA26
SB-2021-075
270.3
271.5
1.2
0.47
Au-AA26
SB-2021-075
271.5
272.7
1.2
2.08
Au-AA26
SB-2021-075
272.7
273.8
1.1
0.80
Au-AA26
SB-2021-075
273.8
274.9
1.1
0.86
Au-AA26
SB-2021-075
274.9
276.3
1.4
0.23
Au-AA26
SB-2021-075
276.3
277.4
1.1
0.01
Au-AA26
SB-2021-075
277.4
278.5
1.1
0.03
Au-AA26
SB-2021-075
278.5
279.55
1.05
0.01
Au-AA26
SB-2021-075
279.55
281
1.45
0.27
Au-AA26
SB-2021-075
281
282.5
1.5
0.20
Au-AA26
SB-2021-075
282.5
283.5
1
0.16
New Bulk
Zone
Au-AA26
SB-2021-075
283.5
284.5
1
1.61
Au-AA26
SB-2021-075
284.5
285.5
1
0.21
Au-AA26
SB-2021-075
285.5
286.45
0.95
1.47
Au-AA26
SB-2021-075
286.45
287.9
1.45
0.60
Au-AA26
SB-2021-075
325.3
326.1
0.8
0.19
Au-AA26
SB-2021-075
326.1
327.25
1.15
0.43
Au-AA26
SB-2021-075
327.25
327.95
0.7
0.85
Au-AA26
SB-2021-075
327.95
328.5
0.55
0.43
Au-AA26
SB-2021-075
328.5
329.1
0.6
0.15
Au-AA26
SB-2021-075
329.1
329.65
0.55
0.21
Au-AA26
SB-2021-075
329.65
330.3
0.65
0.34
Au-AA26
SB-2021-075
330.3
331.1
0.8
0.90
Au-AA26
SB-2021-075
331.1
331.9
0.8
0.02
New Bulk
Zone
Au-AA26
SB-2021-075
331.9
333
1.1
0.14
Au-AA26
SB-2021-075
333
334.4
1.4
0.05
Au-AA26
SB-2021-075
334.4
335.7
1.3
0.04
Au-AA26
SB-2021-075
335.7
337
1.3
0.14
Au-AA26
SB-2021-075
337
338.2
1.2
0.47
Au-AA26
SB-2021-075
338.2
339.2
1
0.37
Au-AA26
SB-2021-075
339.2
340.2
1
0.71
Au-AA26
SB-2021-075
340.2
340.95
0.75
0.62
Au-AA26
SB-2021-075
340.95
342.45
1.5
0.08
Au-AA26
SB-2021-075
342.45
343.7
1.25
0.02
Au-AA26
SB-2021-075
343.7
345.2
1.5
0.01
Au-AA26
SB-2021-075
345.2
346.5
1.3
0.02
Au-AA26
SB-2021-075
346.5
347.8
1.3
0.06
Au-AA26
SB-2021-075
347.8
349.3
1.5
0.49
Au-AA26
SB-2021-075
349.3
350.8
1.5
0.72
Au-AA26
SB-2021-075
350.8
352
1.2
0.03
Au-AA26
SB-2021-075
352
352.9
0.9
0.20
Au-AA26
SB-2021-075
352.9
354.1
1.2
0.33
Au-AA26
SB-2021-075
354.1
355
0.9
0.16
Au-AA26
SB-2021-075
355
355.7
0.7
7.33
Au-AA26
SB-2021-075
355.7
356.5
0.8
0.37
Au-AA26
SB-2021-075
356.5
357.5
1
0.52
Au-AA26
SB-2021-075
373.75
374.3
0.55
0.38
77 Vein
Au-AA26
SB-2021-075
374.3
375
0.7
144.50
Au-SCR24
SB-2021-075
375
375.65
0.65
0.11
Au-AA26
SB-2021-075
455.15
456
0.85
2.36
52 Vein
Au-AA26
SB-2021-075
456
456.6
0.6
1.42
Au-AA26
SB-2021-075
456.6
457.2
0.6
26.30
Au-SCR24
SB-2021-075
457.2
457.9
0.7
0.15
52 Vein
Au-AA26
SB-2021-075
457.9
458.4
0.5
0.52
Au-AA26
SB-2021-075
458.4
459.3
0.9
0.36
Au-AA26
SB-2021-075
474.55
475.05
0.5
22.50
52 Splay Vein
Au-SCR24
SB-2021-075
475.05
475.55
0.5
3.23
Au-AA26
SB-2021-075
475.55
476.05
0.5
0.13
Au-AA26
SB-2021-075
476.05
476.9
0.85
0.11
Au-AA26
SB-2021-075
476.9
477.55
0.65
0.18
Au-AA26
SB-2021-075
616.75
617.45
0.7
0.63
222 Vein
Zone
Au-AA26
SB-2021-075
617.45
618.65
1.2
0.50
Au-AA26
SB-2021-075
618.65
619.65
1
0.88
Au-AA26
SB-2021-075
619.65
620.5
0.85
1.22
Au-SCR24
SB-2021-075
620.5
621.2
0.7
1.01
Au-AA26
SB-2021-075
621.2
622
0.8
2.27
Au-AA26
SB-2021-075
622
622.5
0.5
0.83
Au-AA26
SB-2021-075
622.5
624
1.5
0.37
Au-AA26
SB-2021-075
624
625.3
1.3
0.36
Au-AA26
SB-2021-075
625.3
626.1
0.8
0.34
Au-AA26
SB-2021-075
626.1
627
0.9
1.48
Au-AA26
SB-2021-075
627
627.6
0.6
2.31
Au-AA26
SB-2021-075
627.6
628.55
0.95
5.53
Au-AA26
SB-2021-075
628.55
629.15
0.6
2.58
Au-AA26
SB-2021-075
629.15
629.7
0.55
1.45
Au-AA26
SB-2021-075
629.7
630.45
0.75
0.69
Au-AA26
Notes: Diamond drill hole SB-2021-075 has collar orientation of Azimuth 175; Dip -52. True widths are estimated at 40 - 90% of intercept lengths and are based on oriented
core measurements where available. Method Reported includes the most up to date information as of the date of this press release
Qualified Person
The technical information contained in this news release relating to the drill results at the Bralorne
Gold Project has been approved by
Leonardo de Souza
(BSc, AusIMM (CP) Membership 224827),
Talisker's Vice President, Exploration and Resource Development, who is a "qualified person" within
the meaning of National Instrument 43-101, Standards of Disclosure for Mineral Projects.
About Talisker Resources Ltd.
Talisker (
taliskerresources.com
)
is a junior resource company involved in the exploration of gold
projects in
British Columbia, Canada
. Talisker's projects include two advanced stage projects, the
Bralorne Gold Complex and the Ladner Gold Project, both advanced stage projects with significant
exploration potential from historical high-grade producing gold mines, as well as its Spences Bridge
Project where the Company holds ~85% of the emerging Spences Bridge Gold Belt and several
other early-stage Greenfields projects. With its properties comprising 296,983 hectares over
346 claims, three leases and 198 crown grant claims, Talisker is a dominant exploration player in the
south-central
British Columbia
. The Company is well funded to advance its aggressive systematic
exploration program at its projects.
Sample Preparation and QAQC
Drill core at the Bralorne project is drilled in HQ to NQ size ranges (63.5mm and 47.6mm
respectively). Drill core samples are minimum 50 cm and maximum 160 cm long along the core axis.
Samples are focused on an interval of interest such as a vein or zone of mineralization. Shoulder
samples bracket the interval of interest such that a total sampled core length of not less than
3m
both above and below the interval of interest must be assigned. Sample QAQC measures of
unmarked certified reference materials (CRMs), blanks, and duplicates are inserted into the sample
sequence and make up 9% of the samples submitted to the lab for holes reported in this release.
Sample preparation and analyses is carried out by ALS Global in
North Vancouver, British Columbia
,
Canada and SGS Canada in
Burnaby, British Columbia
, Canada. Drill core sample preparation
includes drying in an oven at a maximum temperature of 60°C, fine crushing of the sample to at least
70% passing less than 2 mm, sample splitting using a riffle splitter, and pulverizing a 250 g split to at
least 85% passing 75 microns (ALS code PREP-31 / SGS code PRP89). Gold in diamond drill core
is analysed by fire assay and atomic absorption spectroscopy (AAS) of a 50g sample (ALS code
Au-AA26 / SGS code GO_FAA50V10), while multi-element chemistry is analysed by 4- Acid
digestion of a 0.25 g sample split with detection by inductively coupled plasma mass spectrometer
(ICP-MS) for 48 elements (Ag, Al, As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, In,
K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl, U, V, W,
Y, Zn, Zr). Gold assay technique (ALS code Au-AA26 / SGS code FAA50V10) has an upper
detection limit of 100 ppm. Any sample that produces an over-limit gold value via the gold assay
technique is sent for gravimetric finish (ALS method Au-GRA22 / SGS method GO_FAG50V) which
has an upper detection limit of 1,000 ppm Au. Samples where visible gold was observed are sent
directly to screen metallics analysis and all samples that fire assay above 1 ppm Au are re-analysed
with method (ALS code Au-
SCR24
/ SGS code - 6 - GO_FAS50M) which employs a 1kg pulp
screened to 100 microns with assay of the entire oversize fraction and duplicate 50g assays on the
undersize fraction. Where possible all samples initially sent to screen metallics processing will also
be re-run through the fire assay with gravimetric finish provided there is enough material left for
further processing.
Caution Regarding Forward-Looking Information
Certain statements contained in this press release constitute forward-looking information. These
statements relate to future events or future performance. The use of any of the words "could",
"intend", "expect", "believe", "will", "projected", "estimated" and similar expressions and statements
relating to matters that are not historical facts are intended to identify forward-looking information
and are based on Talisker's current belief or assumptions as to the outcome and timing of such
future events. Actual future results may differ materially. Those assumptions and factors are based
on information currently available to Talisker. Although such statements are based on reasonable
assumptions of Talisker's management, there can be no assurance that any conclusions or forecasts
will prove to be accurate.
While Talisker considers these statements to be reasonable based on information currently
available, they may prove to be incorrect. Forward-looking information involves known and unknown
risks, uncertainties and other factors which may cause the actual results, performance or
achievements to be materially different from any future results, performance or achievements
expressed or implied by the forward-looking information. Such factors include market risks and the
demand for securities of the Company, risks inherent in the exploration and development of mineral
deposits, including risks relating to changes in project parameters as plans continue to be redefined,
risks relating to variations in grade or recovery rates, risks relating to changes in mineral prices and
the worldwide demand for and supply of minerals, risks related to increased competition and current
global financial conditions and the COVID-19 pandemic, access and supply risks, reliance on key
personnel, operational risks, and regulatory risks, including risks relating to the acquisition of the
necessary licenses and permits, financing, capitalization and liquidity risks.
The forward-looking information contained in this news release is made as of the date hereof, and
Talisker is not obligated to update or revise any forward-looking information, whether as a result of
new information, future events or otherwise, except as required by applicable securities laws.
Because of the risks, uncertainties and assumptions contained herein, investors should not place
undue reliance on forward-looking information. The foregoing statements expressly qualify any
forward-looking information contained herein.
Figure 1: SB-2021-075 hole location within the Bralorne East Block. (CNW Group/Talisker
Resources Ltd)
Figure 2: SB-2021-075 cross section with vein intersections and grade. (CNW Group/Talisker
Resources Ltd)
SOURCE
Talisker Resources Ltd
View original content to download multimedia:
http://www.newswire.ca/en/releases/archive/November2021/22/c7750.html
%SEDAR: 00005798E
For further information:
Terry Harbort, President and CEO, [email protected],
+1 416 361 2808
CO: Talisker Resources Ltd
CNW 07:00e 22-NOV-21