Talisker Drilling Re-Commences at Bralorne Gold Project
Talisker Drilling Re-Commences at Bralorne
Gold Project
TORONTO
,
May 26, 2020
/CNW/ - Talisker Resources Ltd. ("Talisker" or the "Company")
(CSE:TSK) (OTCQB:TSKFF) is pleased to announce that drilling has re-commenced at the Bralorne
Gold Project. The Company announced that drilling was suspended
April 1
st
for good practices
during the COVID-19 emergency measures. The drill remained on site. With the provincial
regulations providing for operations to resume, the Company advises that it has now re-commenced
drilling operations with new protocols and practices in place to abide by the regulations and
guidelines in response to the COVID-19 pandemic.
Talisker is undertaking an 11,200m drill program targeting high-grades veins at the project. The
Company has re-entered drill hole SB-2020-005A which was suspended at a depth of
737.40m
near
the Bralorne Mine. Drill hole results disclosed in press releases of
April 1
st
and
May 5
th
from the first
two drill holes from the Pioneer Mine area yielded encouraging results with highlights of 27.3 g/t gold
over
0.6m
, and 32.2 g/t gold over
0.97m
. Encouraging gold mineralization was also encountered in
the vein halos including 2.19 g/t gold over
1.4m
and 2.13 g/t gold over
1.5m
shoulder to high-grade
vein structures. Additional results are pending and will be announced when available.
"The decision to re-commence drilling was undertaken with consultation with local community
representatives. During the drill operations shut down, minimal staff remained at site with strict
social distancing rules in effect to maintain operation of the water treatment plant to meet
environmental requirements. The
11,200m
drill program will continue to target high grade veins at
the Bralorne Gold Project," stated
Terry Harbort
, President & CEO of Talisker who added, "The
Company's geological reconnaissance team of 22 geologists is ready to kick off the 2020 field
season at the Company's Spences Bridge Gold Project mid-June providing some additional time for
local services to be ready. The team is looking forward to getting back to the field and delivering
results on our aggressive greenfields exploration plan."
About Talisker Resources Ltd.
Talisker (
taliskerresources.com
)
is a junior resource company involved in the exploration of gold
projects in
British Columbia, Canada
. Talisker's projects include the Bralorne Gold Complex, an
advanced stage project with significant exploration potential from a historical high-grade producing
gold mine as well as its Spences Bridge Project where the Company holds ~85% of the emerging
Spences Bridge Gold Belt and several other early stage Greenfields projects. With its properties
comprising 290,415 hectares over 320 claims, six leases and 181 crown grant claims, Talisker is a
dominant exploration player in the south-central
British Columbia
. The Company is well funded to
advance its aggressive systematic exploration program at its projects.
Qualified Person
The technical information contained in this news release has been approved by
Leonardo de Souza
(BSc, AusIMM (CP) Membership 224827), Talisker's Vice President, Exploration and Resource
Development, who is a "qualified person" within the meaning of National Instrument 43-101,
Standards of Disclosure for Mineral Projects.
Sample Preparation and QAQC
Drill core at the Bralorne project is drilled in HQ to NQ size ranges (63.5mm and 47.6mm
respectively). Drill core samples are minimum 50 cm and maximum 160 cm long along the core axis.
Samples are focused on an interval of interest such as a vein or zone of mineralization. Shoulder
samples bracket the interval of interest such that a total sampled core length of
3 m
both above and
below the interval of interest must be assigned. Sample QAQC measures of unmarked certified
reference materials (CRMs), blanks, and duplicates are inserted into the sample sequence.
Sample preparation and analyses is carried out by ALS Global, at their laboratory in
North
Vancouver, British Columbia
, Canada. Drill core sample preparation includes drying in an oven at a
maximum temperature of 60°C, fine crushing of the sample to at least 70% passing less than 2 mm,
sample splitting using a riffle splitter, and pulverizing a 250 g split to at least 85% passing 75
microns (code PREP-31).
Gold and in diamond drill core is analysed by fire assay and atomic absorption spectroscopy (AAS)
of a 50g sample (code Au-AA24), while multi-element chemistry is analysed by 4-Acid digestion of a
0.25 g sample split with detection by inductively coupled plasma mass spectrometer (ICP-MS) for
48 elements (Ag, Al, As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, In, K, La, Li, Mg,
Mn, Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl, U, V, W, Y, Zn, Zr).
Gold assay technique Au-AA24 has an upper detection limit of 10ppm. Any sample that produces an
over-limit gold value via the Au-AA24 technique is sent for gravimetric finish via method Au-GRA22
which has an upper detection limit of 1,000 ppm Au. Samples where visible gold was observed are
sent directly to screen metallics analysis and all samples that fire assay above 3 ppm Au are re-
analysed with method Au-
SCR24
which employs a 1kg pulp screened to 100 microns with assay of
the entire oversize fraction and duplicate 50g assays on the undersize fraction. Where possible all
samples initially sent to screen metallics processing will also be re-run through the fire assay with
gravimetric finish provided there is enough material left for further processing.
Caution Regarding Forward Looking Statements
Certain statements contained in this press release constitute forward-looking information. These
statements relate to future events or future performance. The use of any of the words "could",
"intend", "expect", "believe", "will", "projected", "estimated" and similar expressions and statements
relating to matters that are not historical facts are intended to identify forward-looking information
and are based on Talisker's current belief or assumptions as to the outcome and timing of such
future events. Actual future results may differ materially. In particular, this release contains forward-
looking information relating to, among other things, the operations of the Company and the timing
which could be affected by the current global COVID-19 pandemic. Those assumptions and factors
are based on information currently available to Talisker. Although such statements are based on
reasonable assumptions of Talisker's management, there can be no assurance that any conclusions
or forecasts will prove to be accurate.
While Talisker considers these assumptions to be reasonable based on information currently
available, they may prove to be incorrect. Forward looking information involves known and unknown
risks, uncertainties and other factors which may cause the actual results, performance or
achievements to be materially different from any future results, performance or achievements
expressed or implied by the forward-looking information. Such factors include risks inherent in the
exploration and development of mineral deposits, including risks relating to changes in project
parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates,
risks relating to changes in mineral prices and the worldwide demand for and supply of minerals,
risks related to increased competition and current global financial conditions and the COVID-19
pandemic, access and supply risks, reliance on key personnel, operational risks, and regulatory
risks, including risks relating to the acquisition of the necessary licenses and permits, financing,
capitalization and liquidity risks.
The forward-looking information contained in this release is made as of the date hereof, and Talisker
is not obligated to update or revise any forward-looking information, whether as a result of new
information, future events or otherwise, except as required by applicable securities laws. Because of
the risks, uncertainties and assumptions contained herein, investors should not place undue reliance
on forward-looking information. The foregoing statements expressly qualify any forward-looking
information contained herein.
Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the
CSE) accepts responsibility for the adequacy or accuracy of this release. No stock exchange,
securities commission or other regulatory authority has approved or disapproved the information
contained herein.
SOURCE
Talisker Resources Ltd
View original content to download multimedia:
http://www.newswire.ca/en/releases/archive/May2020/26/c4975.html
%SEDAR: 00005798E
For further information:
Terry Harbort, Chief Executive Officer,
[email protected], +1 416 361 2808; Carrie Howes, Director, Investor Relations,
[email protected], +1 416 837 0075
CO: Talisker Resources Ltd
CNW 07:00e 26-MAY-20