Trilogy Announces Additional High-Grade Results from the 2021 Infill Drill Program at the Arctic Project
1 Trust | Respect | Integrity
News Release
Trilogy Announces Additional High-Grade Results from the 2021 Infill
Drill Program at the Arctic Project
April 20, 2022 – Vancouver, British Columbia – Trilogy Metals Inc. (TSX, NYSE
American: TMQ) (“Trilogy” or the “Company”) is pleased to announce the fifth and final set
of infill drilling results from the 2021 summer field season at the Arctic Project , part of the
Upper Kobuk Mineral Projects (“UKMP”) located in Northwestern Alaska managed by Ambler
Metals LLC (“Ambler Metals”), the joint venture operating company equally owned by wholly
owned subsidiar ies of Trilogy and South32 Limited (ASX, LSE, JSE: S32; ADR: SOUHY)
(“South32”).
The 2021 Arctic drill program included 4,131 meters of diamond drilling, comprising 18 holes,
that were designed to convert part of the resources from the Indicated category to the
Measured category, and provide material for metallurgical testing and geotechnical
information. The assay results detailed here are for the remaining nine infill/metallurgical drill
holes from the 2021 summer field season.
Significant h ighlights from the remaining nine drill holes from the 2021 Arctic
program
Based on a cut -off grade of 0.5% copper equivalent, significant zones of high -grade copper,
zinc, lead, gold, and silver mineralization were intersected, including:
• Hole AR21-0190 intersected six mineralized intervals, including
o 19.50 meters of 4.75% copper, 7.83% zinc, 2.04% lead, 1.12 g/t gold
and 87.93 g/t silver for a copper equivalent grade of 9.81%;
o 13.89 meters of 3.46% copper, 2.86% zinc, 0.10% lead, 0.26 g/t gold
and 25.65 g/t silver for a copper equivalent grade of 4.94%; and
o 2.08 meters of 10.18% copper, 9.46% zinc, 1.53% lead, 4.51 g/t gold
and 138.92 g/t silver for a copper equivalent grade of 18.26%.
• Hole AR21 -0189 intersected two mineralized intervals, including 10.42 meters of
6.78% copper, 13.14% zinc, 2.36% lead, 0.42 g/t gold and 102.65 g/t silver
for a copper equivalent grade of 13.58%.
• Hole AR21 -0187 intersected three mineralized intervals, including 6.83 meters of
6.57% copper, 9.69% zinc, 1.58% lead, 0.78 g/t gold and 86.95 g/t silver for
a copper equivalent grade of 11.93%.
• Hole AR21-0186 intersected seven mineralized intervals, including
o 21.18 meters of 2.74% copper, 3.45% zinc, 0.89% lead, 0.88 g/t gold
and 45.02 g/t silver for a copper equivalent grade of 5.26%;
o 10.07 meters of 3.53% copper, 2.31% zinc, 0.38% lead, 0.59 g/t gold
and 59.40 g/t silver for a copper equivalent grade of 5.41%; and
TSX, NYSE American
Symbol: TMQ
2 Trust | Respect | Integrity
o 6.68 meters of 3.18% copper, 3.24% zinc, 0.78% lead, 0.65 g/t gold
and 68.99 g/t silver for a copper equivalent grade of 5.66%.
• Hole AR21 -0183 intersected three mineralized intervals, including 7.10 meters of
7.10% copper, 6.51% zinc, 0.38% lead, 0.19 g/t gold and 54.97 g/t silver for
a copper equivalent grade of 10.23%.
• Hole AR21-0180 intersected eight mineralized intervals, including
o 8.90 meters of 2.20% copper, 2.55% zinc, 0. 46% lead, 0. 39 g/t gold
and 34.61 g/t silver for a copper equivalent grade of 3.84%; and
o 7.07 meters of 2.38% copper, 1.27% zinc, 0.24% lead, 0.09 g/t gold
and 18.28 g/t silver for a copper equivalent grade of 3.15%.
• Hole AR21 -0178 intersected six mineralized intervals, including 4.60 meters of
3.53% copper, 1.37% zinc, 0.10% lead, 0.13 g/t gold and 18.33 g/t silver for
a copper equivalent grade of 4.31%.
• Hole AR21 -0185 intersected four mineralized intervals, including 7.47 meters of
4.28% copper, 6.71% zinc, 1.26% lead, 0.37 g/t gold and 58.17 g/t silver for
a copper equivalent grade of 7.92%.
• Assay results for the first 176.94 meters from drill hole AR21-0176 were made public
on November 29, 2022. The remaining assay results for this hole include 12.41 meters
of 2.88% copper, 3.29% zinc, 0.88% lead, 0.61 g/t gold and 53.96 g/t silver
for a copper equivalent grade of 5.25%.
All reported intervals are thought to be close to the true width and therefore represent the
actual thickness of mineralization.
Tony Giardini, President and CEO of Trilogy, commented, “These latest drilling results serve to
reinforce that the Arctic deposit is truly unique given the very high grades and consistency of
mineralization within the metalliferous horizons. All nine holes in this press release have
exceptional high grades of not only copper but also zinc, lead, silver and gold. The polymetallic
nature of the Arctic deposit, and the exploration upside in the surrounding 181,000-hectare
land package, truly makes this an exceptional project which, we believe, has the potential to
play a significant role in supplying the United States economy with a domestic stable,
environmentally safe supply of critical and green metals for many years.”
Richard Gosse, Trilogy’s Vice President, Exploration stated, “Yet another set of impressive drill
intersections from Arctic – the last of the assays from the 2021 infill/geotechnical drill program.
Besides providing important geotechnical data and increasing the certainty of future resource
estimates, the 2021 drill program at Arctic found mineralization extending beyond the pit
boundary used in the 2020 Arctic Feasibility Study, and from an exploration perspective, shows
Zones 3, 4 and 5 are open at shallower depths to the north.”
On November 22, 2021, the Company released the assay result s for two geotechnical drill
holes AR21 -0173 and AR21 -0175 that intersected high -grade mineralization beyond the
currently designed pit at Arctic. Subsequently on November 29, 2021, the Company released
additional drilling results from two infill/metallurg ical holes drilled early in the 2021 field
season. Of note is drill hole AR21-0176 which intersected 19.91 meters of almost 12% copper
equivalent. On January 25, 2022, the Company released the results for two additional
metallurgical/infill drill holes fro m Arctic and on March 17, 2022, the Company released the
results for an additional four infill holes at Arctic. For more information on these drilling results,
3 Trust | Respect | Integrity
please visit the Company’s website at https://trilogymetals.com/news-and-media/news/.
These latest drilling results from the 2021 program contain mineralized intervals consistent
with previous drilling conducted within the resource area on the property. Significant
mineralized intervals of high-grade mineralization at a cut -off of 0.5% copper equivalent are
reported in Table 1. The locations of the holes are shown in Figure 1 and Table 2.
Of the 18 holes drilled at Arctic last summer, eight holes were for the geotechnical program.
The 10 remaining drill holes were part of the infill/metallurgical program, with three of the 10
drill holes also being used for the hydrology program.
Table 1. Drill Intercepts from the 2021 Arctic Infill Drilling Program
Notes:
• Copper equivalent (CuEq) calculations use metal prices assumptions of US$3.00/lb for copper, US$1.10/lb
for zinc, US$1.00/lb for lead, US$1,300/oz for gold, and US$18.00/oz for silver.
• Results are core intervals and not true thickness; true widths have not been determined for the above
intercepts but are believed to be representative of actual drill thicknesses.
• Significant interval defined as a minimum of 1.0-meter copper interval with average grade >0.5% CuEq.
• Cut-off grade of 0.5% CuEq.
• Internal dilution up to three meters of <0.5% CuEq.
• Intervals of <1.0 meter not reported.
• Core recovery averaged 96%.
Hole From (m) To (m) Length (m) CuEq (%) Cu (%) Zn (%) Pb (%) Ag (g/t) Au (g/t) Zone
184.49 196.90 12.41 5.25 2.88 3.29 0.88 53.96 0.61 Zone 1
139.77 141.16 1.39 0.73 0.35 0.48 0.13 15.65 0.04 Zone 5
147.96 149.82 1.86 0.72 0.06 0.04 0.39 18.35 0.56 Zone 4
176.70 181.30 4.60 4.31 3.53 1.37 0.10 18.33 0.13 Zone 3
199.53 199.83 0.30 11.14 6.23 9.36 1.11 89.40 0.48 Zone 2.5
210.55 215.70 5.15 1.08 0.90 0.21 0.02 5.91 0.08 Zone 1
236.50 247.47 10.97 1.27 0.93 0.36 0.06 9.16 0.17 Zone 1a
131.46 133.96 2.50 1.08 0.69 0.45 0.10 10.70 0.14 Zone 7a
145.32 154.22 8.90 3.84 2.20 2.55 0.46 34.61 0.39 Zone 5
156.77 157.45 0.68 2.00 0.67 2.01 0.32 24.50 0.42 Zone 4
164.99 172.06 7.07 3.15 2.38 1.27 0.24 18.28 0.09 Zone 3
172.82 174.16 1.34 2.84 1.83 1.90 0.25 20.56 0.07 Zone 3
220.27 221.84 1.57 1.58 1.34 0.17 0.02 10.50 0.12 Zone 2
240.87 242.06 1.19 1.11 1.01 0.03 0.00 4.97 0.06 Zone 1
249.17 253.91 4.74 0.83 0.70 0.14 0.00 5.41 0.05 Zone 1a
183.09 187.41 4.32 1.50 0.46 1.33 0.47 26.40 0.25 Zone 4
197.58 197.98 0.40 4.14 3.15 1.22 0.48 25.20 0.25 Zone 3
200.90 208.00 7.10 10.23 7.10 6.51 0.38 54.97 0.19 Zone 3
121.84 129.31 7.47 7.92 4.28 6.71 1.26 58.17 0.37 Zone 5
148.30 150.78 2.48 0.80 0.72 0.01 0.00 7.24 0.02 Zone 3
155.52 157.45 1.93 1.95 1.83 0.04 0.01 7.47 0.07 Zone 3
169.78 170.15 0.37 0.50 0.16 0.55 0.16 7.41 0.03 Zone 3
109.41 119.48 10.07 5.41 3.53 2.31 0.38 59.40 0.59 Zone 5
124.69 145.87 21.18 5.26 2.74 3.45 0.89 45.02 0.88 Zone 4
153.94 157.48 3.54 6.72 0.82 7.43 3.08 121.42 1.66 Zone 4
160.23 160.53 0.30 5.39 2.58 5.98 0.81 32.40 0.09 Unknown
170.90 173.25 2.35 3.56 2.81 1.19 0.12 20.36 0.13 Zone 3
177.94 182.53 4.59 5.34 1.68 7.89 1.13 37.45 0.08 Zone 2.5
193.57 200.25 6.68 5.66 3.18 3.24 0.78 68.99 0.65 Zone 1
71.22 73.22 2.00 1.64 0.29 0.26 0.10 10.30 1.78 Zone 7b
84.00 90.83 6.83 11.93 6.57 9.69 1.58 86.95 0.78 Zone 5
123.19 124.50 1.31 8.30 6.18 4.12 0.47 42.75 0.10 Zone 4
51.64 62.06 10.42 13.58 6.78 13.14 2.36 102.65 0.42 Zone 5
428.85 429.25 0.40 2.17 0.44 4.52 0.09 3.58 0.01 Unknown
134.24 136.32 2.08 18.26 10.18 9.46 1.53 138.92 4.51 Zone 5
141.13 160.63 19.50 9.81 4.75 7.83 2.04 87.93 1.12 Zone 4
161.46 165.51 4.05 5.20 3.02 4.03 0.19 43.82 0.38 Zone 4
170.74 175.49 4.75 6.78 4.28 5.06 0.31 40.72 0.28 Zone 3
185.48 199.37 13.89 4.94 3.46 2.86 0.10 25.65 0.26 Zone 2.5
217.89 222.65 4.76 1.82 1.33 0.09 0.02 29.13 0.31 Zone 1
AR21-0190
Composites reported previously on November 29, 2021
AR21-0186
AR21-0187
AR21-0189
AR21-0178
AR21-0180
AR21-0183
AR21-0185
AR21-0176
4 Trust | Respect | Integrity
• Minimum sample length was 0.17m, average sample length was 2.4m overall and 1.7m within mineralized
zones.
• Some rounding errors may occur.
The reported intervals are based on a copper-equivalent grade of 0.5% using metal prices from
Trilogy’s 2020 Arctic feasibility study ( US$3.00/lb copper, US$1.10/lb zinc, US$1.00/lb lead,
US$1,300/oz gold, and US$18.00/oz silver) and a maximum of 3-meters internal dilution. All
drill hole intercepts are close to true width.
Table 2. Drill Hole Locations at the Arctic Project
Coordinates are in UTM Zone 4N (meters) coordinate system, NAD83 Datum.
Drill Hole Descriptions
A cross section showing drill holes AR21 -0180, AR21-0183 and AR21 -0190 can be seen in
Figure 2. Also, a cross section showing drill holes AR21-0185, AR21-0187 and AR21-0189 is
shown in Figure 3.
Hole AR21-0178 which is sized HQ3 (61 mm diameter), was drilled as part of the geotechnical
program. At 178.17 meters, a 55 -centimetre-thick and partly sphalerite and chalcopyrite
mineralized quartz vein is present. From 178.72 to 180.95 meters, below the vein, base metal
mineralization consists of semi-massive sulphides and is comprised of chalcopyrite, and dark-
red sphalerite. Where mineralization is not massive or semi -massive, stringer -style
mineralization parallel to foliation is present. At 199.53 meters, another 30-centimetre interval
of semi-massive chalcopyrite and sphalerite mineralization is present. From 234.32 to 244.66
meters, weak chalcopyrite and sphalerite mineralization is present as thin (< 5 centimeters)
lenticular-shaped aggregates.
Hole AR21-0180 which is sized HQ3 (61 mm diameter), was drilled as part of the geotechnical
program. Mineralization begins at 131.46 meters and continues to 166.11 meters with two
massive sulphide intercepts. From 147.02 to 148.09 meters, the first massive sulphide section
is pyritic and rubbly. Chalcopyrite stringer-style mineralization also increases towards 151.55
meters, where massive sulphide is present from 151.55 to 152.54 meters, and trace native
copper is present on some fractures. The massive sulphide interval, although thin, is copper
Hole East (m) North (m) Elevation (m) Azimuth Dip Length (m)
AR21-0176 613213 7453131 880 35 -70 205.9
AR21-0178 613380 7453402 994 35 -70 282.9
AR21-0180 613396 7453336 995 35 -70 267.3
AR21-0183 613396 7453336 995 35 -48 300.5
AR21-0185 613429 7452893 956 35 -77 235.3
AR21-0186 613309 7453167 918 35 -84 200.3
AR21-0187 613511 7453126 994 40 -67 286.5
AR21-0189 613535 7453056 984 55 -70 439.5
AR21-0190 613327 7453277 948 35 -57 296.7
5 Trust | Respect | Integrity
Figure 1. Location of Drill Holes from the Arctic Infill Drilling Program
dominated comprised of up to 45% chalcopyrite, lesser pyrite, and minor barite. From 152.54
to 171.87 meters , the interval hosts variable sphalerite and chalcopyrite mineralization.
Sphalerite typically manifests as thin near massive bands, and chalcopyrite is present both as
bands and stringers. The section from 221.88 to 267.31 meters is weakly mineralized wher e
chalcopyrite stringer-style mineralization is present with and replaced by pyrrhotite.
Hole AR21-0183 which is sized HQ3 (61 mm diameter), was drilled as part of the geotechnical
program. It intersected massive sulphides from 200.90 to 204.95 meters. Mi neralization
consisted of 35% chalcopyrite, 20% sphalerite, minor pyrite, and trace bornite and covellite.
From 238 to 256.65 meters, the interval is composed of weak mineralization and is generally
marked by fine to medium grained trace pyrite and even more occasionally pyrrhotite.
6 Trust | Respect | Integrity
Figure 2. Cross Section Showing Drill Holes AR21-0180, AR21-0183 and AR21-0190
Figure 3. Cross Section Showing Drill Holes AR21-0185, AR21-0187 and AR21-0189
7 Trust | Respect | Integrity
Hole AR21-0185 which is sized HQ3 (61 mm diameter ), was drilled as part of the resource
conversion and metallurgical bulk sampling programs , as well as the hydrology testing
program. Between 123.19 and 128.20 meters , this hole intersected approximately 4 meters
of massive and semi-massive sulphides. The massive and semi-massive units host up to 30%
chalcopyrite, 20% sphalerite, 50% pyrite, minor barite, and trace amounts of bornite and
covellite. Mottled barite bands up to 2 cm (rarely 4 cm) were associated with fine grained
chalcopyrite and pyrite. Very minor b anded stringers of chalcopyrite, sphalerite, and pyrite
within foliation occur between 146 and 157 meters.
Hole AR21-0186 which is sized PQ3 (83 mm diameter), was drilled as part of the resource
conversion and metallurgical bulk sampling programs. Drilling was prematurely terminated in
massive sulphides at 200.25 meters when the drill rods stuck. From 111.81 to 114.91 meters,
drilling encountered massive sulphide mineralization. Beyond 139.20 meters, mineralization
contains periodic bands of massive sulphi des with quartz-chlorite-talc-calcite gangue; where
generally, mineralization is composed of short, massive sulphide bands in chlorite -talc rocks.
Between 139.20 and 157.48 meters, massive sulphides and semi-massive sulphides are locally
barite-rich and alternates with typical grey shist.
Hole AR21-0187 which is sized HQ3 (61 mm diameter), was drilled as a part of the geotechnical
program. A massive sulphide interval from 85.18 to 89.66 meters averages 5% pyrite, 35%
chalcopyrite, and 5% galena. Another mineralized interval from 123.75 to 124.5 meters hosts
semi massive sulphides with 5% pyrite, 13% chalcopyrite, and 12% sphalerite.
Hole AR21-0189 which is sized HQ3 (61 mm diameter), was drilled as part of the geotechnical
program. The first massive sulphide zone was encountered from 51.34 to 60.88 meters with
the first 20 cm of the interval containing disseminated chalcopyrite that progressively increases
into a massive sulphide interval. The first 1.25 meters of the massive sulphides con tain 40%
chalcopyrite, 20% pyrite, and 15% sphalerite. From 56.10 meters to 56.62 meters , the
massive sulphides become increasingly copper -rich at the expense of sphalerite which
decreases in abundance significantly. From 58 to 59.24 meters, bornite minera lization is
present in moderate amounts associated with very weak chalcocite mineralization and
abundant chalcopyrite mineralization. From 59.24 to 60.88 meters, at the end of the first
massive sulphide intercept, chalcopyrite becomes the dominant sulphide. The second massive
sulphide zone was observed from 61.54 to 62.06 meters with 85% chalcopyrite, 5% pyrite and
2% sphalerite.
Hole AR21-0190 which is sized HQ3 (61 mm diameter), was drilled as part of the geotechnical
program. The interval f rom 134.24 to 159.46 meters is a combination of interlayered semi
massive and massive sulphides that contain an approximate average of 25% pyrite, 35%
chalcopyrite and 20% sphalerite. Another mineralized zone was encountered from 186.75 to
195.57 meters wh ich contains massive sulphides averaging 35% pyrite, 25% chalcopyrite,
20% sphalerite, 2% barite and 1% bornite.
All percentages of sulphide mineralization are based off the visual estimations in the core.
Within the Arctic deposit, mineralization occurs as stratiform semi-massive sulphide to massive
sulphide beds within primarily chlorite schists and fine -grained quartz schists. The sulphide
beds average 4 m eters in thickness but vary from less than 1 m eter up to as much as 20
meters in thickness.
8 Trust | Respect | Integrity
QA/QC Program
The drilling program, sampling and assaying protocol, and data verification were managed by
qualified persons (QPs) employed by Ambler Metals. The diamond drill holes were completed
using PQ3 or HQ3 diameter core, and recoveries averaged 95%. Drill core was cut lengthwise
into halves using a diamond saw, with one-half used to construct composites for metallurgical
testing and one-half cut lengthwise to provide quarter core for sampling. The remainder of the
core was retained in core trays and archived at site.
Samples were collected through mineralized zones using a 0.17 m minimum length and 2.5 m
maximum length; average s ample length is 1.70 m. Weights of the drill core samples range
from 0.2 to 16.86 kg, depending on the size of core, rock type, and recovery.
Each core sample was placed into a bag with a numbered tag and quality control samples were
inserted between core samples using the same numbering sequence. Then, samples were
grouped into batches for shipping and laboratory submissions. Each batch of 20 samples
contains three quality control (QC) samples that comprise one certified reference material
(CRM), one core blank (BLK), and one core or crushed duplicate (DUP). Chain -of-custody
records are maintained for sample shipments and the custody is transferred from Ambler
Metals’ expeditor to the laboratory upon delivery.
Samples were shipped initially to ALS Minerals’ laboratory in Fairbanks, Alaska, USA, then on
to ALS Minerals’ laboratory in Hermosillo, Mexico , for sample preparation. ALS Minerals
Fairbanks and Her mosillo are satellite sample preparation facilities accredited under ALS
Minerals. After preparation at ALS Minerals Hermosillo, split pulp samples were shipped to ALS
Minerals in North Vancouver, B.C., Canada, for assaying. ALS Minerals North Vancouver is an
independent laboratory certified under ISO 9001: 2008 and accredited under ISO/IEC
17025:2005 by the Standards Council of Canada. ALS Minerals includes its own internal quality
control samples comprising certified reference materials, blanks, and pulp duplicates.
Drill core samples were weighed (WEI -21), dried if excessively wet (DRY -21), coarse jaw
crushed to 70% passing 6 mm (CRU -21), fine jaw crushed to 70% passing 2 mm (CRU -31),
riffle split to 250 g subsamples (SPL -21) and pulverized to 85% passing 75 μm (PUL -31).
Crushed duplicates were created by riffle splitting crushed samples into two parts.
Gold analyses were completed using a 30 g lead fire assay and AAS finish (Au -AA23). Multi-
element analyses for 48 elements were completed using a geochemical four-acid digestion and
ICP-ES/MS finish (ME -MS61). Over -range assays for silver, copper, zinc and sulfur were
completed using an ore grade four -acid digestion and ICP -ES finish (ME -OG62). Additional
analyses were completed for barium and mercury.
Gold, silver, copper, lead and zinc assays for QC samples were reviewed to ensure that CRMs
are within tolerance limits specified on supplier certificates, BLKs are below acceptable
thresholds, and DUPs display statistical patterns normally expected for sample types, methods,
and elements. CRMs that returned as says outside of tolerance limits and BLKs with assays
above thresholds were deemed to have failed. Sample batches containing failed QC samples
were re-assayed to ensure that the QC samples returned acceptable results before release. All
QC monitoring data are reviewed and signed off by an independent QA/QC geologist.
There is no known relationship between core sample recoveries and assay grades. Ambler
Metals will submit 5% of the assay intervals from prospective lithologies to a laboratory
independent of ALS Minerals for check assaying.