Talon Metals Reports More Drilling Success and Assays from Its Michigan Boulderdash Discovery 110.3 Meters of 2.24% CuEq (0.88% NiEq) Starting at a Depth of Only 9.54 Meters, and an Intercept of 2.35 Meters of 10.47% Copper Equivalent (4.13% NiEq)
Talon Metals Reports More Drilling Success
and Assays from Its Michigan Boulderdash
Discovery
110.3 Meters of 2.24% CuEq (0.88% NiEq) Starting at a Depth of
Only 9.54 Meters, and an Intercept of 2.35 Meters of 10.47%
Copper Equivalent (4.13% NiEq)
Tamarack, Minnesota--(Newsfile Corp. - February 27, 2025) - Talon Metals Corp. (TSX: TLO) (OTC
Pink: TLOFF)
("
Talon
" or the "
Company
") is pleased to announce additional assays from its
Boulderdash discovery in Michigan's Upper Peninsula. Most notably, drill hole 24BD0003 intercepted
110.3 meters of nickel-copper sulphide mineralization
beginning at 9.54 meters depth
assaying 0.57%
Ni and 0.50% Cu (2.24% CuEq, 0.88% NiEq), a 40% increase in grade compared to discovery drill hole
24BD0001 (see the Company's press release dated
October 24, 2024
).
Highlights
New assays at Boulderdash confirm nickel and copper grades, including:
Drill hole 24BD0003
:
110.3 meters
of nickel-copper mineralization starting at 9.54 meters
depth assaying 0.57% Ni and 0.50% Cu (
2.24% CuEq, 0.88% NiEq)
Drill hole 24BD0008
:
154.25 meters
of nickel-copper mineralization starting at 10.75 meters
depth assaying 0.48% Ni, 0.44% Cu (
1.93% CuEq, 0.76% NiEq)
and
2.35 meters
of
nickel-copper massive sulphide mineralization starting at 182.11 meters depth assaying
2.33% Ni, 2.95% Cu (
10.47% CuEq, 4.13% NiEq)
Boulderdash is situated just 8 miles northwest of the Eagle Nickel Mine, currently the only operating
nickel mine in the U.S.
Table 1: Selected assays from 2024 drilling at the Boulderdash Discovery
Drill Hole
(#)
From (m)
To
(m)
Length
(m)
Assay
NiEq
(%)
CuEq
(%)
Ni (%)
Cu (%)
Co (%)
Pd (g/t)
Pt (g/t)
Au (g/t)
24BD0003
9.54
119.85
110.31
0.57
0.5
0.03
0.07
0.13
0.06
0.88
2.24
24BD0008
10.75
165
154.25
0.48
0.44
0.02
0.07
0.14
0.07
0.76
1.93
and
182.11
184.46
2.35
2.33
2.95
0.07
0.60
1.49
0.56
4.13
10.47
See Table 2 for further technical information
Figure 1: Photograph showing 2.35 meters of nickel-copper massive sulphide mineralization
assaying 2.33% Ni and 2.95% Cu beginning at 182.11 meters depth in drill hole 24BD0008.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2443/242550_916a2eca0404a91f_001full.jpg
"Additional drilling at Boulderdash has generated longer and higher grade nickel-copper intercepts
than discovery hole 24BD0001",
said Brian Goldner, Talon's Chief Exploration Officer
.
Goldner
continued, "Drill hole 24BD0008 intersected the first high-grade massive sulphide accumulation at a
shallow depth of 182 meters.
This exploration progression shows uncanny resemblance to the
discovery history of the nearby Eagle nickel deposit which started with intercepts of net textured
mineralization and progressed to massive sulphides before culminating in a deposit. As it stands,
Boulderdash is now shaping up to have two exploration targets: a massive sulphide body at depth and
a near-surface target starting at a depth of just 9 meters. Next steps are to explore for lateral
extensions of the near-surface mineralization and to locate more of the high-grade massive sulphide
mineralization".
These Boulderdash drill holes are located within the land package that is part of the earn-in agreement
with UPX Minerals Inc. (a wholly-owned subsidiary of Sweetwater Royalties), whereby Talon has the right
to acquire up to an 80% ownership interest in approximately 400,000 acres located in the Upper
Peninsula of the State of Michigan.
2025 Boulderdash Exploration Work Plan
The Eagle and Eagle East deposits are being used as exploration models due to their (i) proximity (only
8 miles away), and (ii) geologic similarities.
The model is a near vertical dike with net textured
mineralization above leading downward to sub horizontal massive sulphide sheets intruding into the
metasediment rocks.
Talon's 2025 Boulderdash exploration work plan will focus on two exploration pathways, lateral extension
of the near-surface mineralization and progressive exploration down the dike at depth.
It is expected that
Talon's in-house drilling and geophysics teams will be focused on this work after spring breakup. Talon
is currently drilling at the Tamarack Nickel Project with three in house drill rigs to complete some infill
drilling prior to mobilizing the drill rigs to Boulderdash.
Figure 2: View of drill holes drilled at Boulderdash, looking north-east, displaying %CuEq
values for assay intervals greater than 0.5% CuEq.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2443/242550_916a2eca0404a91f_002full.jpg
Figure 3: Map showing location of Boulderdash and its proximity to the Eagle Mine.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2443/242550_916a2eca0404a91f_003full.jpg
QUALITY ASSURANCE, QUALITY CONTROL AND QUALIFIED PERSON
Nickel, copper, and cobalt grades were first analyzed by a 4-acid digestion and ICP AES (ME-MS61).
Grades reporting greater than 0.25% Ni and/or 0.1% Cu, using ME-MS61, trigger a sodium peroxide
fusion with ICP-AES finish (ICP81).
Platinum, palladium and gold are initially analyzed by a 50g fire
assay with an ICP-MS finish (PGM-MS24).
Any samples reporting >1g/t Pt or Pd trigger an over-limit
analysis by ICP-AES finish (PGM-ICP27) and any samples reporting >1g/t Au trigger an over-limit
analysis by AAS (Au-AA26).
The laboratory used is ALS Minerals who is independent of the Company.
Lengths are drill intersections and not necessarily true widths. True widths cannot be calculated at this
time due to the unknown geometry of the mineralization. Drill intersections have been independently
selected by Talon. Drill composites have been independently calculated by Talon. The geological
interpretations in this news release are solely those of the Company. The locations and distances
highlighted on all maps in this news release are approximate.
Dr. Etienne Dinel, Vice President, Geology of Talon, is a Qualified Person within the meaning of NI 43-
101. Dr. Dinel is satisfied that the analytical and testing procedures used are standard industry operating
procedures and methodologies, and he has reviewed, approved and verified the technical information
disclosed in this news release, including sampling, analytical and test data underlying the technical
information.
Where used in this news release:
NiEq% = Ni% + Cu% x $3.75/$9.50 + Co% x $25.00/$9.50 + Pt [g/t]/31.103 x $1,000/$9.50/22.04 + Pd
[g/t]/31.103 x $1,000/$9.50/22.04 + Au [g/t]/31.103 x $1,400/$9.50/22.04
CuEq% = Cu%+ Ni% x $9.50/$3.75 + Co% x $25.00/$3. + Pt [g/t]/31.103 x $1,000/$3.75/22.04 + Pd
[g/t]/31.103 x $1,000/$3.75/22.04 + Au [g/t]/31.103 x $1,400/$3.75/22.04
ABOUT TALON
Talon is a TSX-listed base metals company in a joint venture with
Rio Tinto
on the high-grade
Tamarack
Nickel-Copper-Cobalt Project
located in central Minnesota. Talon's shares are also traded in the US
over the OTC market under the symbol TLOFF. The Tamarack Nickel Project comprises a large land
position (18km of strike length) with additional high-grade intercepts
outside the current resource area
.
Talon has an earn-in right to acquire up to 60% of the Tamarack Nickel Project, and currently owns 51%.
Talon is focused on (i) expanding and infilling its current high-grade nickel mineralization resource
prepared in accordance with NI 43-101 to shape a mine plan for submission to Minnesota regulators,
and (ii) following up on additional high-grade nickel mineralization in the Tamarack Intrusive Complex.
Talon has a
neutrality and workforce development agreement
in place with the United Steelworkers
union. Talon's Battery Mineral Processing Facility in Mercer County was
selected by the US Department
of Energy
for US$114.8 million funding grant from the Bipartisan Infrastructure Law and the
US
Department of Defense awarded Talon a grant of US$20.6 million
to support and accelerate Talon's
exploration efforts in both Minnesota and Michigan. Talon has well-qualified experienced exploration,
mine development, external affairs and mine permitting teams.
For additional information on Talon, please visit the Company's website at
www.talonmetals.com
or
contact:
Media Contact:
Cody Mayer
(218) 460-9968
Investor Contact:
Mike Kicis
1 (647) 968-0060
FORWARD-LOOKING STATEMENTS
This news release contains certain "forward-looking statements". All statements, other than statements
of historical fact that address activities, events or developments that the Company believes, expects or
anticipates will or may occur in the future are forward-looking statements. These forward-looking
statements reflect the current expectations or beliefs of the Company based on information currently
available to the Company. Such forward-looking statements include statements relating to future
exploration work. Forward-looking statements are subject to significant risks and uncertainties and other
factors that could cause the actual results to differ materially from those discussed in the forward-looking
statements, and even if such actual results are realized or substantially realized, there can be no
assurance that they will have the expected consequences to, or effects on the Company.
Any forward-looking statement speaks only as of the date on which it is made and, except as may be
required by applicable securities laws, the Company disclaims any intent or obligation to update any
forward-looking statement, whether as a result of new information, future events or results or otherwise.
Although the Company believes that the assumptions inherent in the forward-looking statements are
reasonable, forward-looking statements are not guarantees of future performance and accordingly undue
reliance should not be put on such statements due to the inherent uncertainty therein.
Table 2: Michigan Boulderdash Assay Results
Drill Hole
From
To
Length
Assay
NiEq
(%)
CuEq
(%)
(#)
(m)
(m)
(m)
Ni (%)
Cu (%)
Co (%)
Pd (g/t)
Pt (g/t)
Au (g/t)
24BD0002
10
30.5
20.50
0.43
0.40
0.02
0.06
0.11
0.05
0.67
1.71
24BD0003
9.54
119.85
110.31
0.57
0.5
0.03
0.07
0.13
0.06
0.88
2.24
including
22
79
57
0.76
0.7
0.03
0.1
0.17
0.08
1.18
2.99
including
38.92
52.4
13.48
1.05
0.9
0.04
0.12
0.2
0.09
1.59
4.02
including
67.63
73.48
5.85
1.16
1.32
0.04
0.17
0.31
0.16
1.9
4.83
24BD0004
13.19
75.1
61.91
0.51
0.44
0.02
0.06
0.12
0.05
0.78
1.99
including
27.5
33.77
6.27
1.22
0.98
0.05
0.13
0.20
0.08
1.80
4.56
and
171.39
174.5
3.11
0.37
0.17
0.02
0.09
0.14
0.03
0.52
1.32
and
243.87
247.65
3.78
0.55
0.66
0.02
0.15
0.22
0.07
0.94
2.39
24BD0005
48.35
67.49
19.14
0.38
0.30
0.02
0.04
0.09
0.03
0.58
1.47
and
72.42
75.86
3.44
0.41
0.32
0.02
0.04
0.10
0.04
0.63
1.59
24BD0006
89.5
131.28
41.78
0.68
0.49
0.03
0.07
0.16
0.05
1.00
2.54
including
102.64
118.69
16.05
1.16
0.80
0.05
0.10
0.24
0.07
1.69
4.28
24BD0007
92
101.69
9.69
0.32
0.27
0.02
0.04
0.10
0.03
0.50
1.27
and
125.5
136.43
10.93
0.48
0.44
0.02
0.09
0.17
0.06
0.78
1.96
24BD0008
10.75
165
154.25
0.48
0.44
0.02
0.07
0.14
0.07
0.76
1.93
including
67.4
72.45
5.05
1.08
1.20
0.04
0.12
0.23
0.51
1.82
4.61
including
97.59
105.72
8.13
1.13
0.70
0.05
0.09
0.26
0.06
1.60
4.06
and
182.11
184.46
2.35
2.33
2.95
0.07
0.60
1.49
0.56
4.13
10.47
and
189.43
190.08
0.65
0.72
1.25
0.04
0.83
0.48
0.52
1.61
4.09
Length refers to drill hole length and not True Width.
True Width is unknown at the time of publication.
All samples were analyzed by ALS Minerals.
Nickel, copper, and cobalt grades were first analyzed by a 4-acid digestion and ICP AES (ME-MS61).
Grades reporting greater than 0.25% Ni and/or 0.1% Cu, using ME-MS61, trigger a sodium peroxide fusion with ICP-AES finish (ICP81).
Platinum,
palladium, and gold are initially analyzed by a 50g fire assay with an ICP-MS finish (PGM-MS24).
Any samples reporting >1g/t Pt or Pd trigger an over-
limit analysis by ICP-AES finish (PGM-ICP27) and any samples reporting >1g/t Au trigger an over-limit analysis by AAS (Au-AA26).
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/242550