Troilus Drills 2.72 G/T AuEq over 34M, Incl. 10.83 G/T AuEq over 6M and 1.49 G/T AuEq over 35.5M, Incl. 2.55 G/T AuEq over 4.5M IN Zone X22; Extends Its Strike Length 150M to 1KM
TROILUS DRILLS 2.72 G/T AUEQ OVER 34M, INCL. 10.83 G/T AUEQ OVER 6M AND 1.49 G/T AUEQ OVER
35.5M, INCL. 2.55 G/T AUEQ OVER 4.5M IN ZONE X22; EXTENDS ITS STRIKE LENGTH 150M TO 1KM
March 23, 2023, Montreal, Quebec – Troilus Gold Corp. (“Troilus” or the “Company”, TSX: TLG ; OTCQX:
CHXMF; FSE: CM5R ) reports assay results from Zone X22 (“X22”) at its Troilus Project , located in
northcentral Quebec, Canada . The results form part of a n ongoing 6,500 metre drill campaign designed
to define and expand this new zone of mineralization discovered in late 2022 (see October 17, 2022, press
release), which originates in the western wall of the formerly mined Z87 pit and now extends for one
kilometre South-West into the Gap Zone. The Company has completed 6,000 metres of the planned 6,500
metre drill program, with over 4000 metres of assays pending. Based on the excellent results to date, a n
additional 1,300 metres of drilling is planned to continue delineating this expanding zone.
Today’s results have extended mineralization at X22 by an additional 150 metres to the South -West, for
a total strike length of one kilometre, and remains open to the southwest and at depth. The footprint of
X22 has grown significantly (see Figure 1), with drilling demonstrating much higher than average grade,
over significant widths. All results reported herein lie entirely outside of the PEA pit shells and will be
included in the upcoming Feasibility Study.
Zone X22 Drill Intercept Highlights:
• Hole X22-23-027 confirmed mineral continuity to the S-W by an additional 150m with one of the
best intervals drilled at X22 to date (see Figure 2): 34m at 2.72 g/t AuEq , including 6m at 10.83
g/t AuEq, and 2m at 26.83 g/t AuEq
• Hole X22-23-024 intersected 34.5m at 1.49 g/t AuEq, including 19.5m at 1.66 g/t AuEq and 4.5m
at 2.55 g/t AuEq, 150m beyond the PEA pit shell (see Figure 3).
• 12m at 1.37 g/t AuEq, within a broader intersection of 42m at 0.72 g/t AuEq in hole X22-23-014,
extending down dip mineralization by 50m beyond previously reported hole X22 -22-002, which
intersected 2.42 g/t AuEq over 9m within a broader intersection of 50m at 0.77 g/t AuEq ( see
Figure 4).
Justin Reid, CEO of Troilus Gold, commented, “These results continue to demonstrate the continuity and
strong grade profile of the newly discovered X22 Zone. Its proximity to surface and to the Z87 pit shell
make X22 an ideal target in the early years of mine development, with strong potential to positively impact
the grade profile. The team has been very successful in modelling and understanding the controls of
mineralization at X22, and through targeted drilling have delineated a continuous gold zone covering a
one-kilometre strike length, which remains open to the south-west and at depth. We look forward to the
continued influx of assays from across X22 in the coming weeks to further understand how they can
positively impact our upcoming Feasibility study.”
Zone X22 is hosted within a D2 structural corridor that overprints a tonalitic body within the Troilus
intrusion. Where D1 structures intersect this cor ridor, endowment of higher grades can occur. Similar to
other zones at Troilus, the primary control on high -grade distribution is a stretching lineation, which has
been measured with the use of oriented core.
This understanding will drive the optimization of subsequent drill campaigns to target higher grades. Drill
hole X22-23-027 returned an interval of 10.83 g/t AuEq over 6 metres, one the best intervals drilled at
X22 to date, and now connects mineralization of X22 with previously drilled holes located in the Gap Zone,
covering over one kilometer of strike length. An additional 1,300 metres of focused drilling has been
allocated to expand on today’s encouraging results.
Drilling at X22 has continued to deliver excellent results marked by strong continuity of mineralization at
high grades and in close proximity to the Z87 pit, which is expected to have a significant impact on the
Z87 pit design, constraints, and ore release early in the mine life . As a result of this rapidly evolving zone
and its impact on the project, X22 drilling, including the near -complete 6,500 metre program, as well as
the additional planned 1,300 metres of drilling, will be included in the upcoming Mineral Resource
Estimate “MRE” and Feasibility Study in order to deliver the most accurate representation of the project.
Drilling at X22 has continued to deliver excellent results marked by strong continuity of mineralization at
high grades and in close proximity to the Z87 pit, which is expected to have a significant impact on the
Z87 pit design, constraints, and ore release early in the mine life. As a result, of this rapidly evolving zone
and its impact on the project, it is now the Company’s intention that all X22 drilling results will be included
in the upcoming Mineral Resource Estimate and Feasibility Study in order to deliver the most accurate
representation of the project.
Fig
ure 1 – Plan View of Zone X22 Showing Current and Previously Reported Drill Holes
Figure 2 – Section 12,575N (C - C’ Figure 1) Facing North Showing Results for Hole X22-23-027
Figure 3 – Section 13,350N (A - A’ Figure 1) Facing North Showing Results for X22-23-024
Figure 4 – Section 13,025N (B - B’ Figure 1) Facing North Showing Results for Hole X22-23-014
Table 1 – Zone X22 Drill Results
Hole From
(m) To (m) Interval
(m)
Inside/Outside
of PEA Pit Shell
Au
Grade
(g/t)
Cu
Grade
(%)
Ag
Grade
(g/t)
AuEq
Grade
(g/t)
X22-23-014
67.0 68 1.0 outside 7.02 0.03 0.70 7.06
164 176 12.0 outside 0.65 0.08 1.80 0.77
213 255 42.0 outside 0.58 0.11 1.11 0.72
incl 234 246 12.0 outside 1.12 0.18 1.76 1.37
259 260 1.0 outside 1.51 0.05 0.60 1.57
X22-23-016
114 115 1.0 outside 1.02 0.09 1.10 1.14
134 135 1.0 outside 6.90 0.14 2.70 7.10
172 222 50.0 outside 0.48 0.08 0.83 0.59
incl 182 188 6.0 outside 0.69 0.17 2.28 0.93
incl 208 209 1.0 outside 3.09 0.11 1.80 3.24
incl 221 222 1.0 outside 1.97 0.09 0.70 2.09
234 259 25.0 outside 0.65 0.08 1.79 0.77
incl 249 253 4.0 outside 1.43 0.14 3.80 1.65
257 259 2.0 outside 1.43 0.08 2.20 1.55
X22-23-024
17 17.5 0.5 outside 1.27 0.15 2.10 1.47
37.5 38 0.5 outside 0.92 0.04 6.80 1.04
133.5 138.5 5.0 outside 1.49 0.04 2.17 1.55
incl 136 136.5 0.5 outside 12.95 0.19 12.70 13.32
147 147.5 0.5 outside 5.82 0.70 31.00 7.02
178 212.5 34.5 outside 1.46 0.02 0.51 1.49
incl 180.5 200.0 19.5 outside 1.61 0.03 0.77 1.66
incl 186.0 190.5 4.5 outside 2.52 0.01 0.42 2.55
incl 203.5 204 0.5 outside 23.90 0.00 0.25 23.91
241.5 242 0.5 outside 1.73 0.00 0.25 1.73
270 270.5 0.5 outside 2.32 0.00 0.25 2.32
327.5 328 0.5 outside 1.74 0.28 4.90 2.14
X22-23-027
131 132 1.0 outside 1.08 0.23 2.70 1.39
138 172 34.0 outside 2.06 0.25 33.17 2.72
incl 140 143 3.0 outside 0.75 0.28 295.63 4.14
incl 140 141 1.0 outside 0.39 0.61 883.00 10.25
incl 147 150 3.0 outside 1.00 0.07 1.90 1.11
incl 160 166 6.0 outside 9.42 0.88 30.10 10.83
incl 161 163 2.0 outside 23.22 2.21 80.30 26.82
186 209 23.0 outside 0.60 0.08 1.70 0.72
incl 196 201 5.0 outside 1.37 0.21 5.30 1.68
231 232 1.0 outside 1.08 0.03 41.20 1.54
*Note drill intervals reported in this news release are down-hole core lengths as true thicknesses cannot be determined with
available information.
Quality Assurance and Control
During the Zone X22 drill program, one meter assay samples were taken from NQ core and sawed in half.
One-half was sent for assaying at ALS Laboratory, a certified commercial laboratory, and the other half
was retained for results, cross checks, and future reference. A strict QA/QC program was applied to all
samples; which included insertion of one certified mineralized standard and one blank sample in each
batch of 25 samples. Every sample was processed with standard crushing to 85% passing 75 microns on
500 g splits. Samples were assayed by one-AT (30 g) fire assay with an AA finish and if results were higher
than 3.5 g/t Au, assays were redone with a gravimetric finish. For QA/QC samples, a 50 g fire assay was
done. In addition to gold, ALS laboratory carried out multi-element analysis for ME-ICP61 analysis of 33
elements four acid ICP-AES.
Qualified Person
The technical and scientific information in this press release has been reviewed and approved by Nicolas
Guest, P.Geo., Senior Project Geologist, who is a Qualified Person as defined by NI 43-101. Mr. Guest is
an employee of Troilus and is not independent of the Company under NI 43-101.
About Troilus Gold Corp.
Troilus Gold Corp. is a Canadian-based junior mining company focused on the systematic advancement
and de-risking of the former gold and copper Troilus Mine towards production. From 1996 to 2010, the
Troilus Mine produced +2 million ounces of gold and nearly 70,000 tonnes of copper. Troilus is located in
the top-rated mining jurisdiction of Quebec, Canada, where is holds a strategic land position of 1,420 km²
in the Frôtet-Evans Greenstone Belt. Since acquiring the project in 2017, ongoing exploration success has
demonstrated the tremendous scale potential of the gold system on the property with significant mineral
resource growth. The Company is advancing engineering studies following the completion of a robust PEA
in 2020, which demonstrated the potential for the Troilus project to become a top-ranked gold and copper
producing asset in Canada. Led by an experienced team with a track-record of successful mine
development, Troilus is positioned to become a cornerstone project in North America.
For more information:
Caroline Arsenault
VP Corporate Communications
+1 (647) 407-7123
Cautionary Note Regarding Forward-Looking Statements and Information
Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability; the estimate of
Mineral Resources in the updated Mineral Resource statement may be materially affected by environmental,
permitting, legal, title, taxation, socio -political, marketing, or other relevant issues. There is no certainty that the
Indicated Mineral Resources will be converted to the Probable Mineral Reserve category, and there is no certainty
that the updated Mineral Resource statement will be realized.
The PEA is preliminary in nature, includes inferred mineral resources that are considered too speculative geologically
to have the economic considerations applied to them that would enable them to be categorized as mineral reserves,
and there is no certainty that the PEA will be realize d. Mineral resources that are not mineral reserves do not have
demonstrated economic viability. The PEA is subject to a number of risks and uncertainties. See below and the
Company’s latest technical report available on SEDAR for more information with resp ect to the key assumptions,
parameters, methods and risks of determination associated with the foregoing.
This press release contains “forward- looking statements” within the meaning of applicable Canadian securities
legislation. Forward -looking statements include, but are not limited to, statements regarding the impact of the
ongoing drill program and results on the Company, the possible economics of the project and the Company’s
understanding of the project; the development potential and timetable of the project; the estimation of mineral
resources; realization of mineral resource estimates; the timing and amount of estimated future exploration; the
anticipated results of the Company’s ongoing 2023 drill program and their possible impact on the potential size of
the mineral resource estimate; costs of future activities; capital and operating expenditures; success of exploratio n
activities; the anticipated ability of investors to continue benefiting from the Company’s low discovery costs, technical
expertise and support from local communities . Generally, forward-looking statements can be identified by the use
of forward-looking terminology such as “plans”, “expects” or “does not expect”, “is expected”, “budget”, “scheduled”,
“estimates”, “forecasts”, “intends”, “continue”, “anticipates” or “does not anticipate”, or “believes”, or variations of
such words and phrases or statements that certain actions, events or results “may”, “could”, “would”, “will”, “might”
or “will be taken”, “occur” or “be achieved”. Forward-looking statements are made based upon certain assumptions
and other important facts that, if untrue, could cause the actual results, performances or achievements of Troilus to
be materially different from future results, performances or achievements expressed or implied by such statements.
Such statements and information are based on numerous assumptions regarding present and future business
strategies and the environment in which Troilus will operate in the future. Certain important factors that could cause
actual results, performances or achievements to differ materially from those in the forward -looking statements
include, amongst others, currency fluctuations, the global economic climate, dilution, share price volatility and
competition. Forward-looking statements are subject to known and unknown risks, uncertainties and other important
factors that may cause the actual results, level of activity, performance or achievements of Troilus to be materially
different from those expressed or implied by such forward -looking statements, including but not limited to: there
being no assurance that the exploration program will result in expanded mineral resources; risks and uncertainties
inherent to mineral resource estimates; the impact the COVID 19 pandemic may have on the Company’s activities
(including without limitation on its employees and suppliers) and the economy in general; the impact of the recovery
post COVID 19 pandemic and its impact on gold and other metals; the receipt of necessary approvals; general
business, economic, competitive, political and social uncertainties; future prices of mineral prices; accidents, labour
disputes and shortages; environmental and other risks of the mining industry, including without limitation, risks and
uncertainties discussed in the most recent Technical Report and in other continuous disclosure documents of the