Titan Mining Completes Phase I Drilling at the Kilbourne Graphite Project, Additional Assays Returned including 143 ft at 3.6% Graphitic Carbon

Titan Mining Completes Phase I Drilling at the Kilbourne Graphite Project,

Additional Assays Returned including 143 ft at 3.6% Graphitic Carbon

Vancouver, B.C., June 26, 2024 – Titan Mining Corporation (TSX:TI) (“Titan” or the “Company”)

is pleased to announce the completion of Phase I drilling at the Company’s Kilbourne Graphite

Project. Phase I included a total of 11,916 feet (3,632 m) of drilling in 39 diamond drill holes. This

phase of exploration has been focused on mineralization amenable to open pit mining within the

fully permitted footprint of the Company’s 100% owned Empire State Mine (“ ESM”) in upstate

New York.

Assays from 32 of the 39 holes have been returned to date, including the 17 holes highlighted

below. Results from the most recent assays continued to demonstrate the consistency of graphitic

carbon grades returned from the initial 15 holes from Phase I of drilling. These results were

reported in the Company’s April 9 , 2024 press release titled “ Titan Mining Provides Initial Drill

Results on the Kilbourne Graphite Project, Results Include 173.5 ft at 3.75% Graphitic Carbon”.

Significant mineralized intercepts from drilling include:

o KX24-017 – 143.5 feet assaying 3.6% graphitic carbon

o KX24-031 – 92.8 feet assaying 3.5% graphitic carbon

o KX23-016 – 89.1 feet assaying 3.1% graphitic carbon

Phase I has successfully tested 8,225 ft (2,507 m) of Kilbourne strike length, with graphitic carbon

mineralization intercepted in all 39 holes. Twenty-nine of the 32 holes with assays returned

intercepted graphite mineralization with a n average thickness of 58.5 ft ( 17.8 m) for the upper

mineralized zone, and 25.5 ft (7.8 m) for the lower mineralized zone. The non-weighted, arithmetic

average grade of the mineralized intercepts is 3.1% graphitic carbon, with individual assays

reaching 13.5% graphitic carbon.

Significant mineralized intercepts bookend the Kilbourne strike length within ESM’s active use

permit. Mineralization remains open along strike, with an additional ~17,000 ft of the Kilbourne

host geology mapped outside of the permitted ground . The mapped extent of this geologic unit

falls within mineral rights held by the Company. The Company continues to develop its

understanding of the Kilbourne deposit and plans for Phase II of drilling to commence in or before

the fourth quarter of this year.

In addition to Phase I drilling , Titan has continued metallurgical and materials testing, with initial

results expected in the third quarter of this year. These tests will provide the Company with a

description of the size and quality of the flake graphite in concentrate and help guide additional

test work and end use application studies.

Table I. Mineralized intercepts from Kilbourne exploration program (holes 16-32)

2023-2024 Kilbourne Drilling

Hole ID From

(ft) To (ft) Interval

(ft) From (m) To (m) Interval

(m) Cg% Zone

KX24-016 355.0 444.1 89.1 108.2 135.4 27.2 3.1 Upper

505.0 571.3 66.3 153.9 174.1 20.2 2.8 Lower

KX24-017 331.0 474.5 143.5 100.9 144.6 43.7 3.6 Upper

572.0 572.6 0.6 174.3 174.5 0.2 2.6 Lower

KX24-018 533.1 596.0 62.9 162.5 181.7 19.2 3.4 Upper

640.0 677.0 37.0 195.1 206.3 11.3 3.2 Lower

KX24-019 316.0 334.7 18.7 96.3 102.0 5.7 2.8 Upper

367.0 381.6 14.6 111.9 116.3 4.5 2.9 Lower

KX24-020 231.1 262.6 31.5 70.4 80.0 9.6 2.7 Upper

301.1 316.0 14.9 91.8 96.3 4.5 2.5 Lower

KX24-021 26.7 70.4 43.7 8.1 21.5 13.3 3.3 Upper

KX24-022 458.2 508.9 50.7 139.7 155.1 15.5 3.1 Upper

543.6 574.4 30.8 165.7 175.1 9.4 3.0 Lower

KX24-023 No Significant Intercepts

KX24-024 No Significant Intercepts

KX24-025 47.0 77.1 30.1 14.3 23.5 9.2 3.0 Lower

KX24-026 345.7 363.0 17.3 105.4 110.6 5.3 2.5 Upper

420.5 440.0 19.5 128.2 134.1 5.9 2.8 Lower

KX24-027 23.0 52.6 29.6 7.0 16.0 9.0 2.9 Upper

119.9 145.9 26.0 36.5 44.5 7.9 2.5 Lower

KX24-028 53.0 92.7 39.7 16.2 28.3 12.1 3.0 Upper

KX24-029 31.3 48.4 17.1 9.5 14.8 5.2 3.0 Upper

54.0 90.7 36.7 16.5 27.6 11.2 3.3 Lower

KX24-030 0.0 38.7 38.7 0.0 11.8 11.8 2.7 Upper

49.4 88.7 39.3 15.1 27.0 12.0 2.3 Lower

KX24-031 87.2 180.0 92.8 26.6 54.9 28.3 3.5 Upper

234.9 273.1 38.2 71.6 83.2 11.6 2.9 Lower

KX24-032 No Significant Intercepts

Note: The true width of the mineralization is not currently known.

Table II. Collar Location

Kilbourne Collars

Hole ID Length (ft) Easting (ft) Northing

(ft)

Elevation

(ft) Azimuth Dip

KX24-016 607 13112.5 13638.8 609.2 130 -90

KX24-017 623 12874.1 13130.2 614.3 0 -90

KX24-018 719 13174.1 14255.2 599.2 140 -50

KX24-019 408 14143.0 14574.6 593.4 160 -50

KX24-020 332 14664.3 14594.7 593.5 170 -50

KX24-021 152 15130.4 14311.3 593.3 180 -50

KX24-022 611 13654.8 14516.8 597.6 160 -50

KX24-023 106 13695.0 12984.0 636.5 0 -90

KX24-024 67 14064.4 13477.8 630.3 0 -90

KX24-025 95 14544.9 13817.1 635.8 0 -90

KX24-026 612 8942.8 8895.1 626.6 105 -50

KX24-027 179 13796.1 13519.0 610.2 0 -90

KX24-028 149 14043.5 13741.8 604.1 0 -90

KX24-029 119 14542.7 14117.5 592.3 0 -90

KX24-030 117 14943.5 14078.8 633.3 0 -90

KX24-031 286 13290.4 12964.7 627.5 140 -50

KX24-032 226 9321.5 8769.2 635.8 110 -50

Figure 1. Location of the Kilbourne Project relative to ESM Operations

Figure 2. Plan view of drilling showing the location of Kilbourne Exploration holes, planned

drill holes, and trenching.

Figure 3. Cross section showing host lithologies with assays from 2023-2024 drilling.

Highlighted are holes KX23-001, KX24-002, and KX24-015,KX24-016.

Looking North East, section line marked on Figure 2.

Qualified Person

The scientific and technical information contained in this news release and the sampling,

analytical and test data underlying the scientific and technical information has been reviewed,

verified and approved by Donald R. Taylor, MSc., PG, President and Chief Executive Officer of

the Company, a qualified person for the purposes of NI 43 -101. Mr. Taylor has more tha n 25

years of mineral exploration and mining experience and is a Registered Professional Geologist

through the SME (registered member #4029597). Mr. Taylor verified the data disclosed, including

sampling, analytical, and test data underlying the informatio n included in this news release for

which he is responsible, by performing a number of checks to confirm the accuracy of such data.

In addition, Mr. Taylor reviewed the QA/QC reports from the Company’s drill programs and noted

that there were no issues that arose which would affect confidence with the assay data.

Assays and Quality Assurance/Quality Control

To ensure reliable sample results, the Company has a rigorous QA/QC program in place that

monitors the chain -of-custody of samples and includes the insertion of blanks and certified

reference standards at statistically derived intervals within each batch of samples. Core is

photographed and split in half with one-half retained in a secured facility for verification purposes.

Drill core samples submitted for analysis had a minimum weight of 0.6 lb (0.3 kg) and a maximum

weight of 6.0 lb (2.7 kg), with an average weight of 3.6 lb (1.6 kg). Trench samples submitted for

analysis had a minimum weight of 4.2 lb (1.9 kg) and a maximum weight of 26.2 lb (11.9 kg), with

an average weight of 6.2 lb (13.6 kg).

Analysis has been performed as SGS Canada Inc. (“SGS”) an independent ISO/IEC accredited

lab. Sample preparation (crushing and pulverizing) and total graphitic carbon analysis has been

completed at SGS Lakefield, Ontario, Canada. SGS prepares a pulp of all samples and sends

the pulps to their analytical laboratory in Burnaby, B.C., Canada for multielement analysis. SGS

analyzes the pulp sample by leach and IR combustion for total graphitic carbon (GC_CSA05V)

and aqua regia digestion (GE-ICP21B20 for 34 elements) with an ICP – OES finish including Cu

(copper), Pb (lead), and Zn (zinc). All samples in which Cu (copper), Pb (lead), or Zn (zinc) are

greater than 10,000 ppm are re -run using aqua regia digestion (GO_ICP21B100) with the

elements reported in percentage (%).

The Company has not identified any drilling, sampling, recovery, or other factors that could

materially affect the accuracy or reliability of the data set out in this news release. True widths of

the mineralized zones described in this news release are not presently known.

About Titan Mining Corporation

Titan is an Augusta Group company which produces zinc concentrate at its 100%-owned Empire State

Mine located in New York state. Titan is built for growth, focused on value and committed to excellence.

For more information on the Company, please visit our website at www.titanminingcorp.com.

Contact

For further information, please contact:

Investor Relations: Email: [email protected]

Cautionary Note Regarding Forward-Looking Information

Certain statements and information contained in this new release constitute "forward-looking statements", and

"forward-looking information" within the meaning of applicable securities laws (collectively, "forward-looking

statements"). These statements appear in a number of places in this news release and include statements

regarding our intent, or the beliefs or current expectations of our officers and directors, including future exploration

plans at the Kilbourne target and results of metallurgical and materials testing and timing thereof. When used in

this news release words such as “to be”, "will", "planned", "expected", "potential", and similar expressions are

intended to identify these forward-looking statements. Although the Company believes that the expectations

reflected in such forward-looking statements and information are reasonable, undue reliance should not be placed

on forward-looking statements since the Company can give no assurance that such expectations will prove to be

correct. These statements involve known and unknown risks, uncertainties and other factors that may cause actual

results or events to vary materially from those anticipated in such forward-looking statements, including the risks,

uncertainties and other factors identified in the Company's periodic filings with Canadian securities regulators. Such

forward-looking statements are based on various assumptions, including assumptions made with regard to the

ability to advance exploration efforts at ESM; the results of such exploration efforts; the ability to secure adequate

financing (as needed); the Company maintaining its current strategy and objectives; and the Company’s ability to

achieve its growth objectives. While the Company considers these assumptions to be reasonable, based on

information currently available, they may prove to be incorrect. Except as required by applicable law, we assume

no obligation to update or to publicly announce the results of any change to any forward -looking statement

contained herein to reflect actual results, future events or developments, changes in assumptions or changes in

other factors affecting the forward-looking statements. If we update any one or more forward-looking statements,

no inference should be drawn that we will make additional updates with respect to those or other forward-looking

statements. Readers should not place undue importance on forward-looking statements and should not rely upon

these statements as of any other date. All forward-looking statements contained in this news release are expressly

qualified in their entirety by this cautionary statement.