Titan Mining Announces Discovery of New Zone of Near-Mine Mineralization Including 48.7 ft at 23.91% Zinc
Titan Mining Announces Discovery of New Zone of
Near-Mine Mineralization Including 48.7 ft at 23.91% Zinc
Vancouver, BC – January 31, 2023 – Titan Mining Corp oration (TSX: TI) (“ Titan” or the
"Company") is pleased to provide an update on recent drill results from a newly discovered zone
of near-mine mineralization at the Company’s 100% owned Empire State Mine (“ESM”) in upstate
New York. The newly identified mineralized zone lies in close proximity and be tween the
Company’s New Fold and Mahler ore bodies, which are areas of current major production for the
Company.
Significant mineralized intercepts include:
o 32.5 feet assaying 19.0% zinc
o 48.7 feet assaying 23.9% zinc
o 25.4 feet assaying 15.0% zinc
o 30.4 feet assaying 9.0% zinc
The underground exploration program is ongoing, to date six holes have been completed. Assays
have been returned on four of the holes, with two holes still pending results. The mineralization
intercepted lies between the Mahle r and New Fold ore bodies along the same structure. The
relationship between the newly identified zone and the known ore bodies is currently being
evaluated.
ESM General Manager Joel Rheault commented, “we are very optimistic about the drill results
released today. The zone identified is high grade and spatially located in close proximity to our
current underground mining and infrastructure. As we continue to expand the operation and
increase throughput, an additional mining zone in this area could have a very positive near term
impact.”
Table I. Mineralized intercepts from underground exploration program
2022 - Underground Exploration Drlling
Hole ID From (ft) To (ft) Interval (ft) From (m) To (m) Interval (m) Zn%
UX22-019 1,131.4 1,163.9 32.5 344.2 354.1 9.9 19
1,181.1 1,197.8 16.7 359.3 364.4 5.1 13.4
1,261.0 1,309.7 48.7 383.6 398.4 14.8 23.9
1,355.4 1,358.3 2.9 412.3 413.2 0.9 4.6
UX22-020 863 867.5 4.5 262.5 263.9 1.4 5.6
885 892.9 7.9 269.2 271.6 2.4 9.8
UX22-021 870.9 874.3 3.4 264.9 266 1 25.7
883.1 889 5.9 268.6 270.4 1.8 15.3
942.3 967.7 25.4 286.6 294.4 7.7 15
1046.7 1055.5 8.8 318.4 321.1 2.7 5.7
1479 1489 10 449.9 453 3 12.5
UX22-022 1521.7 1533.7 12 462.9 466.6 3.7 9.4
1576.8 1593.6 16.8 479.7 484.8 5.1 5.78
1660.6 1691 30.4 505.2 514.4 9.2 9
Note: The true width of the mineralization is not currently known.
Table II. Collar Location
Collars
Hole ID Length (ft) Easting (m) Northing (m) Elevation (m) Azimuth Dip
UX22-019 450.2 468743 4903736 -953 87 -25
UX22-020 361.8 468743 4903736 -953 87 -35
UX22-021 520.3 468743 4903736 -953 70 -30
UX22-022 672.4 468743 4903736 -953 70 -25
Figure 1. Location of drilling area relative to ESM #4 and Sphaleros with the location of
Figure 2 highlighted
Figure 2. Plan view of drilling showing the location of holes UX22-019 – UX22-022
Exploration Update
The underground exploration drilling is part of a systematic plan to test near-mine targets with the
potential to host high-grade, large-tonnage deposits.
Qualified Person
The scientific and technical information contained in this news release and the s ampling,
analytical and test data underlying the scientific and technical information has been reviewed,
verified and approved by Donald R. Taylor, MSc., PG, President and Chief Executive Officer of
the Company, a qualified person for the purposes of NI 43 -101. Mr. Taylor has more than 25
years of mineral exploration and mining experience and is a Registered Professional Geologist
through the SME (registered member #4029597). The data was verified using data validation and
quality assurance procedures under high industry standards.
Assays and Quality Assurance/Quality Control
To ensure reliable sample results, the Company has a rigorous QA/QC program in place that
monitors the chain -of-custody of samples and includes the insertion of blanks and certified
reference standards at statistically derived intervals within each batch of samples. Core is
photographed and split in half with one-half retained in a secured facility for verification purposes.
Sample preparation (crushing and pulverizing) has been performed at ALS Geochemistry (“ALS”),
an independent ISO/IEC accredited lab located in Sudbury, Ontario, Canada. ALS prepares a
pulp of all samples and sends the pulps to their analytical laboratory in Vancouver, B.C., Canada,
for analysis. ALS analyzes the pu lp sample by an aqua regia digestion (ME -ICP41 for 35
elements) with an ICP – AES finish including Cu (copper), Pb (lead), and Zn (zinc). All samples
in which Cu (copper), Pb (lead), or Zn (zinc) are greater than 10,000 ppm are re -run using aqua
regia digestion (Cu-OG46; Pb-OG46; and Zn -OG46) with the elements reported in percentage
(%). Silver values are determined by an aqua regia digestion with an ICP-AES finish (ME-ICP41)
with all samples with silver values greater than 100 ppm repeated using an aqua re gia digestion
overlimit method (Ag -OG46) calibrated for higher levels of silver contained. Gold values are
determined by a 30 g fire assay with an ICP-AES finish (Au-ICP21).
The Company has not identified any drilling, sampling, recovery, or other factors that could
materially affect the accuracy or reliability of the data set out in this news release.
About Titan Mining Corporation
Titan is an Augusta Group company which produces zinc concentrate at its 100%-owned Empire State
Mine located in New York state. Titan is built for growth, focused on value and committed to excellence.
For more information on the Company, please visit our website at www.titanminingcorp.com.
Contact
For further information, please contact:
Investor Relations: Email: [email protected]
Cautionary Note Regarding Forward-Looking Information
Certain statements and information contained in this new release constitute "forward-looking statements", and
"forward-looking information" within the meaning of applicable securities laws (collectively, "forward-looking
statements"). These statements appear in a number of places in this news release and include statements
regarding our intent, or the beliefs or current expectations of our officers and directors, including continuing to
expand the operation and increase throughput; that an additional mining zone in this area could have a very positive
near term impact; and that the Company plans to test near-mine targets with the potential to host high-grade, large-
tonnage deposits . When used in this news release words such as “could”, “to be”, "will", "plan", "expected",
"potential", and similar expressions are intended to identify these forward-looking statements. Although the
Company believes that the expectations reflected in such forward-looking statements and/or information are
reasonable, undue reliance should not be placed on forward-looking statements since the Company can give no
assurance that such expectations will prove to be correct. These statements involve known and unknown risks,
uncertainties and other factors that may cause actual results or events to vary materially from those anticipated in
such forward-looking statements, including the risks, uncertainties and other factors identified in the Company's
periodic filings with Canadian securities regulators. Such forward-looking statements are based on various
assumptions, including assumptions made with regard to the ability to advance exploration efforts at ESM; the
results of such exploration efforts; the ability to secure adequate financing (as needed); the Company maintaining
its current strategy and objectives; and the Company’s ability to achieve its growth objectives. While the Company
considers these assumptions to be reasonable, based on information currently available, they may prove to be
incorrect. Except as required by applicable law, we assume no obligation to update or to publicly announce the
results of any change to any forward-looking statement contained herein to reflect actual results, future events or
developments, changes in assumptions or changes in other factors affecting the forward-looking statements. If we
update any one or more forward-looking statements, no inference should be drawn that we will make additional
updates with respect to those or other forward-looking statements. You should not place undue importance on
forward-looking statements and should not rely upon these statements as of any other date. All forward-looking
statements contained in this news release are expressly qualified in their entirety by this cautionary statement.