TALA.V · 2026-09-08 12:00:00

Talamore Reports High Grade Assays from Supremo Extension Infill drilling, including hole 26-SPX-RC105 (12.24 g/t Au over 6.4 m) and 26-SPX-RC199 (6.26 g/t Au over 10.2 m), is targeting resource upgrade and conversion within the pit limits

Drill Results

Talamore Reports High Grade Assays from

Supremo Extension

Infill drilling, including hole 26-SPX-RC105 (12.24 g/t Au over

6.4 m) and 26-SPX-RC199 (6.26 g/t Au over 10.2 m), is targeting

resource upgrade and conversion within the pit limits

Infill assays are materially higher grade than the M&I and Inferred resource grade of 1.18 g/t

and 1.72 g/t, respectively

Vancouver, British Columbia--(Newsfile Corp. - September 8, 2026) - Talamore Mining Corporation

(TSX: TALA) (OTCQB: TALMF) ("

Talamore

" or the "

Company

") is pleased to report results from 30

holes of an ongoing 40,000-metre infill and exploration drilling program at its wholly-owned Coffee Gold

Project in Canada's Yukon Territory. Drilling is currently targeting the higher-grade Supremo Extension

zone (Figures 1 & 2), which presently hosts an Indicated Resource of 2,437 kt at a grade of 1.18 grams

per tonne (g/t) gold for a contained 92,000 ounces of gold, and an Inferred Resource of 6,059 kt at a

grade of 1.72 g/t gold for a contained 335,000 ounces of gold. The Inferred grade at Supremo Extension

is significantly higher than the 1.15 g/t Au grade of the overall Coffee Gold Project resource estimate and

thus provides a compelling target for converting high-grade ounces to the Indicated category for inclusion

in the Feasibility Study currently underway.

Today's release includes assay results from 30 reverse circulation holes totalling 4,356 metres of a

planned 25,000 metres of infill drilling at Supremo Extension. A total of 223 drill holes for approximately

32,852 metres have been completed through July of this year, with results for 100 holes comprising

13,764 metres released to date.

Drilling Highlights

Highlights of the holes reported herein from the Supremo Extension structural system include:

12.24 g/t Au over 6.4 m

estimated true width (ETW) in hole

26-SPX-RC105

6.26 g/t Au over 10.2 m

(ETW) in hole

26-SPX-RC199

5.33 g/t Au over 9.5 m

ETW in hole

26-SPX-RC054

3.84 g/t Au over 7.6 m

ETW in hole

26-SPX-RC067

2.77 g/t Au over 12.8 m

ETW in hole

26-SPX-RC055

Tim Warman, President and CEO of Talamore Mining, commented, "These latest results provide

important confirmation of the high-grade continuity and resource growth potential we see at Supremo

Extension. The intercepts reported today are materially above current resource grades, in some cases

extending beyond the limits of the existing resource pit and continue to support our objective of

converting higher-grade ounces for inclusion in the Feasibility Study now underway. As we advance

Coffee toward a construction decision, results like these reinforce our view that Supremo Extension will

be an important part of the Coffee Gold Project."

Geology and Context of Results

The Coffee Gold Project consists of multiple mineralized structural zones forming the equivalent of a

large vein swarm with individual structural zones from one to over thirty metres in width and extending up

to four-kilometres in strike length (Figure 1). The Supremo Extension portion of the Coffee deposit is at

the intersection of a steep dipping northeasterly trending high grade structure and a shallower east-

dipping structural zone.

The shallow dipping structure is unique relative to the other structural zones in the

Coffee deposit because of the much thicker mineralization, lower trace metal concentrations and higher

silver content. The intersection of these two structural trends creates wide zones of much higher-than-

average grade that become ideal for open pit mining.

Hole

26-SPX-RC199

(Figures 2 & 3) encountered better than expected grade near the bottom of

the current resource pit. This new hole also added mineralization within the current resource pit

with mineralization remaining open at depth. The mineralization cut in this cross section indicates

the potential for expanding the pit especially at depth and to the north, with increasing grade.

Hole

26-SPX-RC054 and 26-SPX-RC055

(Figure 2 & 4) confirms good grade and width at the

bottom of the pit and continuity of a strong mineralized structure outside the pit. These drill holes

add confidence to the resource at depth and show potential for pit expansion. These drill holes

should also upgrade the resource classification in this area, which is within the current resource pit.

Assays are pending on one shallow drill hole in this cross section which would define the near

surface extent of the mineralized structure. This cross section provides evidence that the pit could

expand at depth to include a historical high-grade intercept below the current pit.

Hole

26-SPX-RC067

(Figures 2 & 5) helps to confirm the current resource model interpretation

and shows grade increasing within the main mineralized structure.

This hole intercepted

mineralization within the current resource pit and adds confidence to the continuity of good grade.

Assays are pending on three drill holes on this section, which should add continuity to the main

mineralized structures and define the bottom of the pit.

Hole

26-SPX-RC105

(Figures 2 & 6) helps to confirm the current resource model and shows high-

grade continuity with the adjacent drill hole intercepts. This hole also adds mineralization within the

current resource pit and both major structures remain open at depth. These drill results in the low

angle structure are exceptionally good grade which should increase the block grades in this part of

the structure.

These 30 drill holes continue the campaign to infill between existing completed cross sections on the

Supremo Extension target, to increase drill density and upgrade resources from Inferred to Indicated for

inclusion in the Feasibility Study currently underway. Infill and/or expansion drilling has also started on the

Supremo and Latte zones.

Figure 1.

Known mineralized systems and existing drill holes at the Coffee Gold Project. Resource pit

outlines in Figures 1 through 6 are based on the report entitled "NI 43-101 Technical Report for the

2025 Mineral Resource Estimate Update on the Coffee Gold Project, Yukon, Canada" prepared for

Fuerte Metals Corporation by Micon International, with an effective date of August 21, 2025, and an

issue date of October 6, 2025.