Golden Tag Drills 60 g/t Ag.Eq over 73.50 m, Above the Fernandez Zone; Open Pit Style Mineralization Now Extends 290 Vertical m, Commencing from Surface
NEWS RELEASE
Golden Tag Drills 60 g/t Ag.Eq over 73.50 m, Above the Fernandez
Zone; Open Pit Style Mineralization Now Extends 290 Vertical m,
Commencing from Surface
Toronto, Ontario, April 06, 2022: Golden Tag Resources Ltd. (“Golden Tag ” or the " Company")
(TSX.V: GOG) (OTCQB: GTAGF) is pleased to announce complete results from diamond drillhole 22-
64, part of an exploration program targeting bulk -tonnage mineralization on the Company’s 100%
owned San Diego Project, located in Durango Mexico.
Key highlights from hole 22-64 include:
• 60 g/t Ag.Eq over 73.50 metres (“m”) commencing from surface, further highlighting
the opportunity for open pit style mineralization located directly above the
Fernandez Zone
• 317 g/t Ag.Eq over 0.6 m within the Montanez Zone
• 405 g/t Ag.Eq over 0.7 m within the Canta Zone
• Several high-grade intersections within the Rata Zone, including 422 g/t Ag.Eq over
0.63 m and 331 g/t Ag.Eq over 1.04 m
Greg McKenzie, President and CEO commented: "We are pleased to have expanded on our thesis
that open pit style mineralization exists near surface, above the Fernandez Zone. The results from
hole 22-64, when combined with five other historic holes within a 100 m proximity (06- 09, 06-10, 07-
24, 20-51 and 21-57), demonstrates mineralization occurs over several broad intervals within the first
300 metres from surface. This type of mineralization was previously neither identified nor understood.
While additional drilling is required, we remain impressed by the opportunity to transform the project
through the addition of potential open pit style resources above the Fernandez Zone.”
Hole 22-64
Hole 22-64 was drilled at a shallow dip (-45 degrees) from the same setup as hole 21-57 (-78 degrees)
to further test the 57 Target Area, a series of epithermal breccias and quartz-carbonate-sulphide veins
which returned 72 g/t Ag.Eq over 273.7 m, including 861 g/t Ag.Eq over 10.0 m, as previously reported
in news releases dated September 8 and May 27, 2021 discussing hole 21- 57 (see Figures 1 & 2)(1).
Mineralization within the 57 Target Area is a complex interplay of several vein trends proximal to the
southern contact of the Central Diorite, notably late -stage northeast trending epithermal veins of the
57 NE A and 57 NE B trends intersecting with the west -northwest trending San Jose Zone system of
quartz-sulfide veins with associated albite alteration. The San Jose Zone has been identified over a
minimum strike length of 150 m and down to a minimum vertical depth of 290 m.
Hole 22-64 intersected the 57 Target Area from surface returning 60 g/t Ag.Eq over 73.50 m (7.90 to
81.40 m), which includes higher-grade intervals of 980 g/t Ag.Eq over 0.91 m (28.09 to 29.00 m) and
441 g/t Ag.Eq over 2.80 m (29.70 to 32.50 m). The bottom of the 57 Target mineralization at 81.40
m in hole 22-64 is located approximately 240 vertical m above the bottom of the 57 Target
mineralization at 303.20 m in hole 21-57 (72 g/t Ag.Eq over 273.7 m), which extends the total
vertical depth commencing from surface to approximately 290 m. This broad zone of potential
open pit style mineralization has now been identified over an approximate 75 m x 50 m area.
Hole 22-64 was extended to cut across the Montanez, Canta and Rata Zones intersecting 317 g/t
Ag.Eq over 0.60 m (185.45 to 186.05 m) (inclusive of 3.64 g/t Au), 405 g/t Ag.Eq over 0.70 m (238.20
to 238.90 m) and 422 g/t Ag.Eq over 0.63 m (284.37 to 285.00 m) and 331 g/t Ag.Eq over 1.04 m
(286.12 to 287.16 m), respectively (see Table 1). La Rata is a series of east -west trending quartz -
sulfide veins which can be traced for over 500 m strike length on the property.
Open Pit Style Mineralization Observed Within Historic Holes
The database contains four additional diamond drill holes within a radius of 100 m that were observed
to contain open pit style mineralization along with holes 21-57 and 22-64:
• Hole 07-24 returned 55 g/t Ag.Eq over 40.27 m (29.68 to 69.95 m), located 10 m to the east of
hole 21-57.
• Hole 06-10 returned 49 g/t Ag.Eq over 224.85 m (14.60 to 239.45 m), located approximately 50
m east of hole 21-57.
• Hole 20-51 returned 50 g/t Ag.Eq over 35.46 m (93.20 to 128.66 m) and 45 g/t Ag.Eq over 91.84
m (202.66 to 294.50 m) occurring at approximately the same depth as the mineralization at 273.65
m in hole 21-57 (see Table 2 and news release dated April 14, 2021), located downdip to the
south of holes 07-24, 21-57, and 22-64.
• Commencing from surface, hole 06-09 returned 60 g/t Ag.Eq over 211.60 m (2.10 to 213.70 m),
located approximately 125 m to the northeast of hole 21- 57. The mineralization in hole 06-09 is
proximal to the contact of the Central Diorite and may be related to the 57 Target.
The Company is planning to conduct follow- up drilling to better understand the orientation and
continuity of the potential open pit style mineralization within proximity of the 57 Target Area.
Table 1 – Select Assay Intervals from Hole 22-64
Zone Hole From To Length
(m)
Ag.Eq(1)
g/t
Au
g/t
Ag
g/t
Pb
%
Zn
%
Cu
%
57 TARGET 22-64 7.90 81.40 73.50 60 0.07 45 0.11 0.12 0.02
includes 7.90 8.50 0.60 291 0.03 277 0.21 0.06 0.03
includes 28.09 29.00 0.91 980 0.45 882 0.67 0.85 0.07
includes 29.70 32.50 2.80 441 0.31 371 0.68 0.42 0.07
22-64 136.70 138.50 1.80 482 0.24 385 0.49 1.43 0.05
22-64 140.20 140.70 0.50 271 0.10 210 0.34 0.88 0.08
22-64 151.97 152.50 0.53 734 0.20 475 0.99 4.95 0.15
MONTANEZ 22-64 185.45 186.05 0.60 317 3.64 18 0.04 0.13 0.01
CANTA 22-64 238.20 238.90 0.70 405 0.18 212 1.81 2.93 0.07
RATA 22-64 284.37 285.00 0.63 422 0.32 355 0.48 0.47 0.08
RATA 22-64 286.12 287.16 1.04 331 0.08 286 0.23 0.64 0.06
RATA 22-64 294.00 294.82 0.82 297 0.07 264 0.51 0.26 0.02
RATA 22-64 299.10 299.66 0.56 349 0.06 331 0.13 0.13 0.04
Table 2 – Select Assay Intervals from Historic Holes 06-09, 06-10, 07-24. 20-51, & 21-57
Zone Hole From To Length
(m)
Ag.Eq(1)
g/t
Au
g/t
Ag
g/t
Pb
%
Zn
%
Cu
%
06-09 2.10 213.70 211.60 60 0.06 42 0.13 0.17 0.02
includes 106.00 111.40 5.40 550 0.19 408 1.13 1.95 0.14
57 TARGET 06-10 14.60 239.45 224.85 49 0.10 30 0.10 0.14 0.02
includes 236.05 239.45 3.40 390 0.09 268 1.26 1.58 0.13
57 TARGET 07-24 29.68 69.95 40.27 55 0.06 38 0.14 0.14 0.01
57 TARGET 20-51 93.20 128.66 35.46 50 0.06 30 0.14 0.24 0.01
57 TARGET 20-51 202.66 294.50 91.84 45 0.07 15 0.31 0.34 0.01
57 TARGET 21-57 29.55 303.20 273.65 72 0.10 43 0.19 0.33 0.02
includes 73.00 83.00 10.00 861 0.55 628 1.09 3.61 0.12
(1) All results in this release are rounded. Assays are uncut and undiluted. Widths are core-lengths, not true widths as
a full interpretation of actual orientation of mineralization is not complete. Intervals of epithermal, skarn, massive sulfide
or stockwork mineralization to a vertical depth of 300 m were chosen based on a 22 g/t Ag.Eq cutoff with no more than
14.5 m of dilution and vein mineralization below a vertical depth of 300 m were chosen based on a 110 g/t Ag.Eq cutoff
with 0 m dilution. Silver equiv alent: Ag.Eq g/t was calculated using 3-year trailing average commodity prices of
$20.60/oz Ag, $0.90/lb Pb, $1.20/lb Zn, $1650/oz Au, and $3.25/lb Cu. The calculations assume 100% metallurgical
recovery and are indicative of gross in-situ metal value, the Company is planning to perform additional metallurgical
studies later in 2022. The drill intercepts from h istorical holes 06-09, 06-10, 07-24, 20-51, and 21-57 were calculated
using the current silver equivalent parameters outlined above.
Sample Analysis and QA/QC Program
Golden Tag Resources uses a quality assurance/quality control (QA/QC) program that monitors the
chain of custody of samples and includes the insertion of blanks, duplicates, and reference standards
in each batch of samples sent for analysis. Drill core is photographed, logged, and cut in half with one
half retained in a secured location for verification purposes and one half shipped for analysis. Sample
preparation (crushing and pulverizing) is performed at ALS Geochemistry, an independent ISO
9001:2001 certified laboratory, in Zacatecas, Mexico and pulps are sent to ALS Geochemistry in
Vancouver, Canada for analyses. The entire sample is crushed to 70% passing -2 mm and a riffle split
of 250 grams is taken and pulverized to better than 85% passing 75 microns. Samples are analyzed
for gold using a standard fire assay with Atomic Absorption Spectrometry (AAS) (Au-AA23) from a 30-
gram pulp. Gold assays greater than 10 g/t are re- analyzed on a 30- gram pulp by fire assay with a
gravimetric finish (Au- GRA21). Samples are also analyzed using a 35 element inductively coupled
plasma (ICP) method with atomic emission spectroscopy (AES) on a pulp digested by aqua regia (ME-
ICP41). Overlimit sample values for silver (>100 g/t), lead (>1%), zinc (>1%), and copper (>1%) are
re-assayed using a four-acid digestion overlimit method with ICP -AES (ME-OG62). For silver values
greater than 1,500 g/t samples are re-assayed using a fire assay with gravimetric finish on a 30-gram
pulp (Ag-GRA21). No QA/QC issues were noted with the results reported herein.
True widths of drill intercepts have not been determined. Assays are uncut except where indicated.
Review by Qualified Person and QA/QC
The scientific and technical information in this document has been reviewed and approved by Bruce
Robbins, P.Geo., a Qualified Person as defined by National Instrument 43-101.
About Golden Tag Resources
Golden Tag Resources Ltd. is a Toronto based mineral resource exploration company. The Company
holds a 100% interest, subject to a 2% NSR, in the San Diego Project, in Durango, Mexico. The San
Diego property is among the largest undeveloped silver assets in Mexico and is located within the
prolific Velardeña Mining District. Velardeña hosts several mines having produced silver, zinc, lead
and gold for over 100 years. For more information regarding the San Diego property please visit our
website at www.goldentag.ca.
For additional information, please contact:
Greg McKenzie, President & CEO
Ph: 416-504-2020
Email: [email protected]
www.goldentag.ca
Cautionary Statement:
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the
TSXV) accepts responsibility for the adequacy or accuracy of this news release. Certain statements
in this news release are forward-looking and involve a number of risks and uncertainties. Such forward-
looking statements are within the meaning of the phrase ‘forward-looking information’ in the Canadian
Securities Administrators’ National Instrument 51-102 – Continuous Disclosure Obligations. Forward-
looking statements are not comprised of historical facts. Forward-looking statements include estimates
and statements that describe the Company’s future plans, objectives or goals, including words to the
effect that the Company or management expects a stated condition or result to occur. Forward-looking
statements may be identified by such terms as “believes”, “anticipates”, “expects”, “estimates”, “may”,
“could”, “would”, “will”, or “plan”. Since forward- looking statements are based on assumptions and
address future events and conditions, by their very nature they involve inherent risks and uncertainties.
Although these statements are based on information currently available to the Company, the Company
provides no assurance that actual results will meet management’s expectations. Risks, uncertainties
and other factors involved with forward- looking information could cause actual events, results,
performance, prospects and opportunities to differ materially from those expressed or implied by such
forward-looking information. Forward- looking information in this news release includes, but is not
limited to, statements regarding the effects of the Company’s exploration program, assay results from
the ongoing drill program, the expansion or discovery of additional bulk tonnage mineralization or open
pit style mineralization or zones. Factors that could cause actual results to differ materially from such
forward-looking information include, but are not limited to: the ability to predict and counteract the
effects of COVID-19 on the business of the Company, including but not limited to the effects of COVID-
19 on the price of commodities, capital market conditions, restriction on labour and international travel
and supply chains; failure to identify mineral resources; failure to convert estimated mineral resources
to reserves; the inability to complete a feasibility study which recommends a production decision; the
preliminary nature of metallurgical test results; delays in obtaining or failures to obtain required
governmental, environmental or other project approvals; political risks; changes in equity markets;
uncertainties relating to the availability and costs of financing needed in the future; the inability of the
Company to budget and manage its liquidity in light of the failure to obtain additional financing; inflation;
changes in exchange rates; fluctuations in commodity prices; delays in the development of projects;
capital, operating and reclamation costs varying significantly from estimates and the other risks
involved in the mineral exploration and development industry; and those risks set out in the Company’s
public documents filed on SEDAR. Although the Company believes that the assumptions and factors
used in preparing the forward-looking information in this news release are reasonable, undue reliance
should not be placed on such information, which only applies as of the date of this news release, and
no assurance can be given that such events will occur in the disclosed time frames or at all. The
Company disclaims any intention or obligati on to update or revise any forward- looking information,
whether as a result of new information, future events or otherwise, other than as required by law. No
stock exchange, securities commission or other regulatory authority has approved or disapproved the
information contained herein.
Figure 1: Plan View of Holes 06-09, 10, 07-24, 20-51, 21-57, 62, 22-63 & 64
Figure 2: Cross-Section View to East of Holes 06-09, 10, 07-24, 20-51, 21-57, & 22-64 with 57 Target Key Results