Silver One Confirms Historic Silver Grades on Leach Pads and Stockpiles; Initiates Metallurgical Testing at Candelaria Mine Project, Nevada
Silver One Confirms Historic Silver Grades on Leach
Pads and Stockpiles; Initiates Metallurgical Testing at
Candelaria Mine Project, Nevada
Vancouver, British Columbia--(Newsfile Corp. - April 19, 2018) - Silver One Resources Inc. (TSXV: SVE) (OTC Pink: SLVRF)
(FSE: BRK1) ("Silver One" or the "Company") has received encouraging assay results from the previously announced sonic
drilling conducted on the leach pads, stockpiles and dumps on its 100% controlled Candelaria project in Nevada (see news
release from November 28, 2017).
Additionally, Silver One has submitted samples for metallurgical testing to evaluate the
economics for recovery of silver and gold, based on the positive analytical results received.
Greg Crowe, President and CEO of Silver One Resources commented, "The results to date are encouraging as the head grade
of the leach pads, estimated at 43 g/t, is over 3 times greater than the head grades currently being mined at the Rochester Mine
held by Coeur Mining approximately 220 kilometres north of Candelaria.
Further, an average cyanide silver content of 56% for
leach pad material and 64% for fresh material in stockpiles, combined with their respective silver grades reported, provide a
very promising outlook for the project.
Historic silver recoveries at Candelaria ranged from 42% to 51% of the total silver through the heap leaching ores crushed at
sizes below 1 inch. We believe that such recoveries may be improved by milling prior to leaching. The next step is to conduct
metallurgical testing and the composite samples are now in the lab.
We look forward to receiving metallurgical results to
evaluate the economics for recovering silver and gold at Candelaria."
Candelaria Drill Program
Highlights:
A total of 27 holes were drilled on two historic leach-pads (LP1 and LP2), 16 holes on stockpiles and two holes on dumps.
Assays were done on 730 samples, including 590 core samples and 140 standards, duplicates and blanks.
All holes were sampled in their entirety. Samples average 1.88 metres in length representing a total of 1,110 metres
drilled.
Total silver assays in leach pads range from 16 g/t to 111 g/t (41 g/t average).
Cyanide soluble silver in leach pads range from 35% to 77% (56% average).
Total gold assays in leach pads range from 0.017 g/t to 0.75 g/t (0.09 g/t average).
Cyanide soluble gold in leach pads range from 3% to 100% (37% average).
Total silver and gold in stockpiles averages 22.2 g/t and 0.08 g/t respectively.
Cyanide soluble silver and gold in stockpiles average 64% and 89% respectively.
Total silver in dumps varies from 1 g/t to 27 g/t (5 g/t average).
The results above are consistent with previous averages reported for the leach pads, which range between 39 g/t and 48 g/t Ag.
The first average, is the average of samples collected on shallow pits dug on the surface of the leach pads by Silver One in
December 2017 and the second, obtained from SSR Mining Inc.
("SSR" formerly Silver Standard Resources Inc.) by re-
assaying pulps of 10 drill holes drilled by Kinross Gold Corp. in 1992.
Similarly, the average silver grade of 25 g/t in stockpiles
reported by the National Instrument 43-101 ("NI 43-101") technical report filed by SSR in 2001 titled "Candelaria Project
Technical Report", is in line and statistically similar to the average of 22.2 g/t Ag obtained by the results of the Silver One sonic
drill program.
Additional Assay Results
and Drilling Details
A summary of relevant average results of the assays of sonic drill holes are shown below in
Table 1
. All samples of each drill
hole are included in the average.
Additional assay results showing individual samples are included in
Appendix A
.
Table 1:
Candelaria - Summary of Results
Au
(
ppm)
Au
sol
(
ppm)
Ag
(ppm)
Ag
sol
(ppm)
Pct of
Ag
s
ol
Average drill holes 1 - 17 (LP1)
0.08
0.03
39.3
21.6
55%
Average drill holes 18 - 27 (LP2)
0.10
0.03
43.4
24.5
56%
Average drill holes 1 - 27 (LP1 & LP2)
0.09
0.03
41.0
22.8
56%
Average drill holes 30 - 34 (Stockpile 1)
0.08
0.07
20.5
14.04
68.3%
Average drill holes 35 - 45 (Other Stockpiles)
0.10
0.09
23.4
14.1
60.5%
Average drill holes 30 - 45 (All Stockpiles)
0.09
0.08
22.2
14.1
63.7%
Drilling was conducted on a 200-metre spacing rectangular grid with a hole in the center (providing a nominal spacing of 141
metres to 200 metres between drill holes) on LP1, on a 100 metre grid in LP2, and on a 50 to 75 metre spacing grid on the
stockpiles as shown in the figure set forth in
Appendix B
.
All drill holes are 6-inch core holes drilled with a sonic rig and are vertical with variable depth between 1.5 metres to 96.6 metres.
Sample intervals average 1.88 metres.
Individual samples range from 0.6 metres to 3.96 metres all being true widths.
Quality Control and Quality Assurance ("QA/QC")
Silver One follows a systematic and rigorous QA/QC program overseen by Greg Crowe, President & CEO and a Director of
Silver One.
The Company inserts certified standards, duplicates and blanks for 20% of the total samples submitted to the laboratory for
analysis.
All samples collected were dried, split and assayed by Skyline Labs in Tucson,
Arizona, USA (ISO 17025 Laboratory Competence Certification: 2005) for cyanide soluble silver, total silver, multi-element
assay and fire assay gold as follows:
FA-01-50 - Silver by atomic absorption "AA" with aqua regia digestion, 50 gram sample.
CN-2H-60 - Gold-silver cyanide soluble with 2-hour cyanide shake and AA assay, 60 gram sample.
FA-1-50 - Gold fire assay with AA finish, 50 gram sample.
TE-5 - Multi-element assay, 4-acid digestion.
Over limits of silver and gold were further analyzed by fire assay - gravimetric, 50 gram sample.
As part of its standard operating procedures, the laboratory also inserts certified blanks, standards and includes duplicate
analyses.
Metallurgical Testing
Seven composite samples have been prepared and sent to McClelland Laboratories, Inc. in Reno, Nevada for metallurgical
testing. The metallurgical results will assist in determining the best methods to potentially recover silver from the heap leach
pads, stockpiles and dumps.
Extensive metallurgical work was conducted by SSR between 1998 and 2001 which tested recovering silver in leach pads by
cyanidation or flotation alone, and flotation combined with cyanidation among others.
The conclusion was that the best
cost/benefit alternative was the optimization of cyanidation conditions of the cyanide leach process.
Results of preliminary cyanide bottle-roll tests conducted by the Company in December 2017 on samples collected near-surface
on the leach pads, show recoveries between 15% to 20% of the total silver for material crushed to 1.7 millimetres (10 mesh).
Reagents consumption was very low indicating that the cost of leaching the crushed material would be relatively inexpensive.
Recoveries however, may be improved by milling prior to leaching. Therefore, current metallurgical testing is focused on
evaluating milling-leaching scenarios. Further analyses of the samples will consist of additional bottle-roll tests at various finer
fractions (-10, -65 and -200 mesh) using cyanide and ammonium thiosulfate. Results are expected by Q3 2018.
Resource Update
Silver One has engaged Jim McCrea, an independent consultant to prepare a current NI 43-101 resource estimate on the leach-
pads and stockpiles.
The Company anticipates that the resource estimate will be completed by the end of Q3 2018.
Candelaria was historically the highest-grade silver producer in the state of Nevada, averaging over 1,200 g/T AgEq (40 oz/t
AgEq) from high-grade vein mining between the mid-1800s and the mid-1900s. Open pit mining operations were undertaken in
the 1970s through 1998 by several companies, including Nerco, Inc. and Kinross.
Kinross closed the open pit and leach
operation in 1998 due to low silver prices.
Leaching of the historic pads was not completed leaving a substantial amount of silver
unprocessed.
It is estimated that the property has produced over 68 million ounces of silver.
Historical information was obtained
from "Geology of the Candelaria Mining District, Mineral County, Nevada, 1959, Nevada Bureau of Mines, Bulletin 56", and the
SSR Mining Inc. technical report titled "Candelaria Project Technical Report" dated May 24, 2001 (filed on SEDAR June 20,
2002), prepared by Pincock Allen & Holt.
Historical Resource Estimate - Candelaria Project
, Nevada
SSR Mining Inc. acquired the Candelaria Project in 2001 and reported in a technical report titled
"Candelaria Project Technical
Report"
dated May 24, 2001 (filed on SEDAR on June 20, 2002), prepared by Pincock Allen & Holt, the historical mineral
resource estimate shown in the table below.
Candelaria Project
Historical Resource Estimate
Area/Type
Classification
Tons
Factored Ag Grade
(opt Ag
total
)
Sol. Au Grade (opt
Au
soluble
)
AqEq Grade (opt
AgEq
total
)
Ag Ounces (Ag
total
)
Aq Equiv. Ounces
(AqEq
total
)
Mount Diablo
Measured
3,391,000
4.44
0.004
4.67
15,054,000
15,838,000
Indicated
10,231,185
2.84
0.003
3.01
29,005,000
30,796,000
Subtotal,
Measured
+ Indicated
13,623,000
3.23
0.003
3.42
44,060,000
46,633,000
Mount Diablo
Inferred
5,191,000
2.12
0.003
2.30
11,015,000
11,939,000
Northern Belle
9,162,000
2.26
0.002
2.37
20,661,000
21,714,000
Leach Pads
37,328,000
1.29
---
1.29
48,153,000
48,153,000
L.G. Stockpiles
4,000,000
0.75
---
0.75
3,000,000
3,000,000
Subtotal. Inferred
55,681,000
1.49
0.002
1.52
82,829,000
84,806,000
Notes:
1) Lode resources tabulated at a 0.5 opt Ag
soluble
cut-off grades, with only Ag
total
shown in this table
2) Leach pads and low-grade stockpile resources tabulated for entire accumulation of material.
3) Total silver grades factored from soluble silver grades using regression formulas developed by Snowden.
4) Silver equivalent grade includes the contribution from the gold grade (soluble) using an Ag:Au equivalency ratio of 57.8:1.
The historical mineral resource estimate used "measured mineral resource", "indicated mineral resource" and "inferred mineral
resource", which are categories set out in NI 43-101. Accordingly, Silver One considers these historical estimates reliable as
well as relevant as it represents key targets for exploration work by Silver One. The data base for the historical resource
estimate:
(1) Mount Diablo Deposit - Consisted of 538 drill holes by previous owners and 10 drill holes by SSR.
For drill holes that were
twinned, the author used the lower of the two values assigned to the original holes.
The mineral resource estimate used a kriging
estimation method to establish ore zones with a cut-off grade of 0.5 opt Ag. Ordinary kriging was used to interpolate grades in
the block model.
The block models were set up with block dimensions of 25 feet by 25 feet in plan and 10 feet in height.
The
maximum search range used in the higher-grade zone was 235 feet, in the lower grade zone it was 1,000 feet and in the
background zone it was 350 feet. Block models more than 300 feet from the nearest composite only constituted 3 percent of the
total number of estimated blocks and were assigned to an inferred category;
(2) Northern Belle Deposit - Consisted of 226 drill holes by previous owners, of which a portion of these holes were duplicated
for the Mount Diablo Deposit database.
The mineral resource estimate used a kriging estimation method to establish ore zones
with a cut-off grade of 0.5 opt Ag.
The mineral resource estimate used multiple indicator kriging to interpolate grades in the
block model.
Block models were set up with block dimensions of 50 feet by 50 feet in plan and 20 feet in height.
The maximum
search range used in the higher-grade zone was 85 feet, in the intermediate-grade zone was 120 feet and the lower-grade zone
was 140 feet and in the lower undifferentiated material below the current pit topography was 260 feet.
Block models more than
300 feet from the nearest composite only constituted 3 percent of the total number of estimated blocks and were assigned to an
inferred category;
(3) Leach Pads - Consisted of 24,633,000 tons located on Leach Pad 1 and 12,695,000 tons on Leach Pad 2.
The estimate for
Leach Pad 1 is based on silver production indicates 51.5% of total silver was recovered by heap leaching operation, while
81.2% of the soluble silver contact was recovered. Further, the estimate for Leach Pad 2 is based on silver production indicates
42.4% of total silver was recovered by heap leaching operation, while 71.3% of the soluble silver content was recovered;
(4) Low-Grade Stockpile - Based on limited and incomplete data and documentation.
Material placed on the stock piles ranged
from 0.5 to 0.65 opt Ag.
The qualified person has not done sufficient work to classify the historical estimate as a current mineral resource.
Silver One is
not treating this historical estimate as current mineral resources.
Qualified Person
The technical content of this news release has been reviewed and approved by Greg Crowe, P.Geo, President and CEO of
Silver One, and a Qualified Person as defined by NI 43-101
About Silver One
Silver One is a silver-focused exploration company that holds an option to acquire a 100% interest in the past producing
Candelaria Silver Mine Project, located in Nevada, from SSR Mining Inc. and a 100% interest in three significant silver assets
located in Mexico: Penasco Quemado in the State of Sonora, La Frazada in the State of Nayarit, and Pluton in the State of
Durango. The mining assets in Mexico were acquired from First Mining Gold, which is a key shareholder of Silver One resulting
from the transaction.
For more information, please contact:
Silver One Resources Inc.
Monica Hamm
VP, Investor Relations
Phone: (604) 974-5274
Email:
Forward-Looking Statements
Information set forth in this news release contains forward-looking statements that are based on assumptions as of the date of
this news release. These statements reflect management's current estimates, beliefs, intentions and expectations. They are not
guarantees of future performance. Silver One cautions that all forward looking statements are inherently uncertain and that actual
performance may be affected by a number of material factors, many of which are beyond Silver One's control. Such factors
include, among other things: risks and uncertainties relating to Silver One's limited operating history, ability to obtain sufficient
financing to carry out its exploration and development objectives on the Candelaria Project, obtaining the necessary permits to
carry out its activities and the need to comply with environmental and governmental regulations. Accordingly, actual and future
events, conditions and results may differ materially from the estimates, beliefs, intentions and expectations expressed or implied
in the forward-looking information. Except as required under applicable securities legislation, Silver One undertakes no
obligation to publicly update or revise forward-looking information.
NEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED
IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY
FOR THE ADEQUACY OR
ACCURACY
OF THIS RELEASE.
Appendix A
-
Assay results of selected sonic drill holes drilled on leach pads at
the
Candelaria project
Drill Hole
From
(m)
To
(m)
Width
(m)
Sample
Au
total
FA01
(50g)
ppb
Au
soluble
CN2-
H2-60g (ppm)
Ag
total
FA08
(50g)
g/t
Ag
soluble
CN2-
H2-60g (ppm)
Pct Au
Sol
Pct Ag
Sol
SO-C-17-001
0.00
1.83
1.83
202029
197
0.015
46.6
26.5
7.6%
56.9%
SO-C-17-001
1.83
3.66
1.83
202030
316
0.04
57.3
34.4
12.7%
60.0%
SO-C-17-001
3.66
6.25
2.59
202031
242
0.015
84.7
53.5
6.2%
63.2%
SO-C-17-001
6.25
8.53
2.29
202032
64
0.015
43.9
28.7
23.4%
65.4%
SO-C-17-001
8.53
10.36
1.83
202033
127
0.015
70
46.9
11.8%
67.0%
SO-C-17-001
10.36
12.19
1.83
202034
77
0.015
39.5
22.9
19.5%
58.0%
SO-C-17-001
12.19
14.02
1.83
202036
70
0.015
42.6
25.1
21.4%
58.9%
SO-C-17-001
14.02
15.85
1.83
202037
48
0.015
29.8
17.7
31.3%
59.4%
SO-C-17-001
15.85
17.68
1.83
202038
37
0.015
31.8
15.5
40.5%
48.7%
SO-C-17-001
17.68
19.51
1.83
202040
27
0.015
31.9
16.2
55.6%
50.8%
SO-C-17-001
19.51
21.34
1.83
202041
35
0.015
31.9
16.5
42.9%
51.7%
SO-C-17-001
21.34
23.17
1.83
202042
35
0.015
33.7
17.7
42.9%
52.5%
SO-C-17-001
23.17
24.99
1.83
202043
69
0.04
44
23.6
58.0%
53.6%
SO-C-17-001
24.99
26.82
1.83
202044
84
0.05
64.1
32.4
59.5%
50.5%
SO-C-17-001
26.82
28.65
1.83
202045
70
0.04
29
17.6
57.1%
60.7%
SO-C-17-001
28.65
30.48
1.83
202047
42
0.015
17.5
10.5
35.7%
60.0%
SO-C-17-001
30.48
32.31
1.83
202048
93
0.07
29.4
14
75.3%
47.6%
SO-C-17-001
32.31
33.83
1.52
202049
78
0.04
59.1
21.7
51.3%
36.7%
SO-C-17-003
0.00
1.68
1.68
202072
234
0.06
54.4
30.6
25.6%
56.3%
SO-C-17-003
1.68
2.68
1.01
202073
301
0.05
46.1
26.9
16.6%
58.4%
SO-C-17-003
2.68
3.35
0.67
202074
84
0.015
60
26.7
17.9%
44.5%
SO-C-17-003
3.35
5.49
2.13
202076
68
0.03
34.8
19
44.1%
54.6%
SO-C-17-003
5.49
7.01
1.52
202077
42
0.04
19.8
13.1
95.2%
66.2%
SO-C-17-003
7.01
9.30
2.29
202078
89
0.015
29.9
21.1
16.9%
70.6%
SO-C-17-003
9.30
11.58
2.29
202079
77
0.04
39.7
26
51.9%
65.5%
SO-C-17-003
11.58
13.11
1.52
202080
80
0.015
37.1
21.8
18.8%
58.8%
SO-C-17-003
13.11
15.39
2.29
202081
77
0.015
50.1
28.7
19.5%
57.3%
SO-C-17-003
15.39
17.68
2.29
202082
65
0.015
76.2
41.1
23.1%
53.9%
SO-C-17-003
17.68
19.81
2.13
202084
134
0.015
90.6
52.6
11.2%
58.1%
SO-C-17-003
19.81
21.95
2.13
202085
106
0.015
87.9
41.6
14.2%
47.3%
SO-C-17-003
21.95
23.77
1.83
202086
61
0.04
53.3
26.3
65.6%
49.3%
SO-C-17-003
23.77
25.60
1.83
202088
59
0.03
53.8
30.2
50.8%
56.1%
SO-C-17-003
25.60
27.43
1.83
202089
55
0.015
45.2
25
27.3%
55.3%
SO-C-17-003
27.43
29.26
1.83
202090
49
0.015
21.3
11.7
30.6%
54.9%
SO-C-17-003
29.26
31.09
1.83
202091
47
0.05
16
7.5
106.4%
46.9%
SO-C-17-003
31.09
32.00
0.91
202092
13
0.015
53.5
24.1
115.4%
45.0%
SO-C-17-013
0.00
1.68
1.68
202230
84
0.04
31.9
11.8
47.6%
37.0%
SO-C-17-013
1.68
3.51
1.83
202231
119
0.06
51
26.5
50.4%
52.0%
SO-C-17-013
3.51
6.10
2.59
202233
125
0.07
74.6
51
56.0%
68.4%
SO-C-17-013
6.10
7.92
1.83
202234
123
0.06
79.1
41.1
48.8%
52.0%
SO-C-17-013
7.92
9.75
1.83
202235
114
0.07
86.1
45.6
61.4%
53.0%
SO-C-17-013
9.75
11.58
1.83
202237
78
0.03
38.9
20.8
38.5%
53.5%
SO-C-17-013
11.58
13.41
1.83
202238
114
0.08
78.9
42.6
70.2%
54.0%
SO-C-17-013
13.41
15.24
1.83
202239
66
0.015
41.1
21.5
22.7%
52.3%
SO-C-17-013
15.24
17.07
1.83
202241
65
0.04
48.2
27.9
61.5%
57.9%
SO-C-17-013
17.07
18.90
1.83
202242
46
0.04
37.9
20.1
87.0%
53.0%
SO-C-17-013
18.90
20.73
1.83
202243
61
0.03
38.4
22.5
49.2%
58.6%
SO-C-17-013
20.73
22.25
1.52
202244
45
0.015
33.9
20.2
33.3%
59.6%
SO-C-17-019
0.00
1.83
1.83
202309
122
0.04
56.6
25.9
32.8%
45.8%
SO-C-17-019
1.83
3.96
2.13
202310
123
0.05
79.1
36.4
40.7%
46.0%
SO-C-17-019
3.96
6.10
2.13
202312
116
0.015
87.4
36.6
12.9%
41.9%
SO-C-17-019
6.10
7.92
1.83
202313
281
0.1
63.6
35.6
35.6%
56.0%
SO-C-17-019
7.92
9.75
1.83
202314
414
0.05
81.1
40.9
12.1%
50.4%
SO-C-17-019
9.75
11.58
1.83
202315
191
0.05
73.8
38.2
26.2%
51.8%
SO-C-17-019
11.58
13.41
1.83
202316
258
0.05
67.7
40.1
19.4%
59.2%
SO-C-17-019
13.41
15.24
1.83
202318
248
0.11
52
28.5
44.4%
54.8%
SO-C-17-019
15.24
17.07
1.83
202319
343
0.07
76.3
49.8
20.4%
65.3%
SO-C-17-019
17.07
18.59
1.52
202320
144
0.015
40.7
23.2
10.4%
57.0%
SO-C-17-019
18.59
20.73
2.13
202321
141
0.05
48.7
30
35.5%
61.6%
SO-C-17-019
20.73
22.56
1.83
202322
93
0.015
33.2
16.9
16.1%
50.9%
SO-C-17-019
22.56
24.38
1.83
202324
112
0.04
32.5
19.8
35.7%
60.9%
SO-C-17-019
24.38
26.21
1.83
202325
65
0.015
29.8
16.5
23.1%
55.4%
SO-C-17-019
26.21
28.04
1.83
202326
72
0.015
26.2
15.7
20.8%
59.9%
SO-C-17-022
0.00
1.83
1.83
202385
76
0.05
59.8
34.4
65.8%
57.5%
SO-C-17-022
1.83
3.35
1.52
202386
80
0.015
51.8
28.9
18.8%
55.8%
SO-C-17-022
3.35
4.88
1.52
202388
74
0.03
60
34.4
40.5%
57.3%
SO-C-17-022
4.88
6.40
1.52
202389
95
0.04
55.1
34.5
42.1%
62.6%
SO-C-17-022
6.40
8.23
1.83
202390
63
0.015
39.2
25.2
23.8%
64.3%
SO-C-17-022
8.23
9.75
1.52
202392
67
0.03
56.4
35
44.8%
62.1%
SO-C-17-022
9.75
11.58
1.83
202393
75
0.015
54.8
32.1
20.0%
58.6%
SO-C-17-022
11.58
13.41
1.83
202394
87
0.015
56.5
35.1
17.2%
62.1%
SO-C-17-022
13.41
15.24
1.83
202395
74
0.015
41.9
25.8
20.3%
61.6%
SO-C-17-022
15.24
17.07
1.83
202396
103
0.04
38
20.5
38.8%
53.9%
SO-C-17-022
17.07
18.90
1.83
202397
74
0.015
34.6
20.9
20.3%
60.4%
SO-C-17-022
18.90
20.73
1.83
202398
65
0.015
26
14.3
23.1%
55.0%
SO-C-17-022
20.73
22.56
1.83
202399
67
0.04
34.7
19.5
59.7%
56.2%
SO-C-17-022
22.56
24.38
1.83
202400
59
0.015
33.8
18.3
25.4%
54.1%
SO-C-17-022
24.38
26.21
1.83
202402
55
0.05
36.5
21.3
90.9%
58.4%
SO-C-17-022
26.21
27.74
1.52
202403
84
0.12
30.6
16.2
142.9%
52.9%
SO-C-17-022
27.74
29.26
1.52
202404
96
0.12
33
17.2
125.0%
52.1%
SO-C-17-023
0.00
1.83
1.83
202406
84
0.05
65.5
33.7
59.5%
51.5%
SO-C-17-023
1.83
3.66
1.83
202407
85
0.05
67.9
30.7
58.8%
45.2%
SO-C-17-023
3.66
5.49
1.83
202408
90
0.05
61.9
34.2
55.6%
55.3%
SO-C-17-023
5.49
7.77
2.29
202410
72
0.04
53.7
25
55.6%
46.6%
SO-C-17-023
7.77
10.06
2.29
202411
52
0.04
45.9
25.1
76.9%
54.7%
SO-C-17-023
10.06
11.58
1.52
202412
56
0.03
35.1
21
53.6%
59.8%
SO-C-17-023
11.58
13.41
1.83
202413
57
0.015
39.7
21.8
26.3%
54.9%
SO-C-17-023
13.41
15.24
1.83
202415
95
0.05
36.5
20.2
52.6%
55.3%
SO-C-17-023
15.24
17.07
1.83
202416
338
0.015
73.2
39.1
4.4%
53.4%
SO-C-17-023
17.07
18.90
1.83
202417
125
0.015
59.9
35.6
12.0%
59.4%
SO-C-17-023
18.90
20.73
1.83
202418
153
0.06
52.8
30.5
39.2%
57.8%
SO-C-17-023
20.73
22.56
1.83
202419
185
0.015
59.8
35.6
8.1%
59.5%
SO-C-17-023
22.56
24.38
1.83
202421
141
0.015
50
27.8
10.6%
55.6%
SO-C-17-023
24.38
26.21
1.83
202422
139
0.015
76.7
47.1
10.8%
61.4%
SO-C-17-023
26.21
27.74
1.52
202423
49
0.015
60
21.2
30.6%
35.3%
SO-C-17-024
0.00
1.83
1.83
202425
79
0.06
55.5
24.7
75.9%
44.5%
SO-C-17-024
1.83
3.66
1.83
202426
167
0.12
37.7
16.9
71.9%
44.8%
SO-C-17-024
3.66
5.64
1.98
202428
70
0.06
31.3
14.8
85.7%
47.3%
SO-C-17-024
5.64
7.16
1.52
202429
66
0.06
18.1
10.2
90.9%
56.4%
SO-C-17-024
7.16
9.14
1.98
202430
76
0.04
20.9
12.2
52.6%
58.4%
SO-C-17-024
9.14
10.97
1.83
202431
86
0.04
20.4
10.9
46.5%
53.4%
SO-C-17-024
10.97
12.80
1.83
202433
87
0.03
23.5
16.4
34.5%
69.8%
SO-C-17-024
12.80
14.63
1.83
202434
146
0.05
26.8
16.4
34.2%
61.2%
SO-C-17-024
14.63
16.46
1.83
202435
144
0.05
35.1
20.2
34.7%
57.5%
SO-C-17-024
16.46
18.29
1.83
202436
280
0.06
50.2
26.6
21.4%
53.0%
SO-C-17-024
18.29
20.12
1.83
202437
69
0.015
50.5
24.5
21.7%
48.5%
SO-C-17-024
20.12
21.95
1.83
202439
84
0.015
41.9
20.8
17.9%
49.6%
SO-C-17-024
21.95
23.77
1.83
202440
67
0.04
35.8
19.3
59.7%
53.9%
SO-C-17-024
23.77
25.60
1.83
202441
60
0.03
35.1
19.6
50.0%
55.8%
SO-C-17-024
25.60
27.13
1.52
202442
40
0.015
21.3
11.3
37.5%
53.1%
SO-C-17-025
0.00
1.83
1.83
202328
56
0.015
46.5
30.8
26.8%
66.2%
SO-C-17-025
1.83
3.66
1.83
202329
61
0.03
39.4
22.4
49.2%
56.9%
SO-C-17-025
3.66
5.49
1.83
202331
41
0.015
48.8
33
36.6%
67.6%
SO-C-17-025
5.49
7.77
2.29
202332
63
0.015
39.1
25.2
23.8%
64.5%
SO-C-17-025
7.77
9.75
1.98
202333
40
0.015
39.2
27.5
37.5%
70.2%
SO-C-17-025
9.75
11.58
1.83
202334
73
0.015
26.7
16.7
20.5%
62.5%
SO-C-17-025
11.58
13.41
1.83
202336
40
0.015
39.5
28.3
37.5%
71.6%
SO-C-17-025
13.41
15.24
1.83
202337
49
0.015
29.5
18.1
30.6%
61.4%
SO-C-17-025
15.24
17.07
1.83
202338
44
0.015
25.9
17.4
34.1%
67.2%
SO-C-17-025
17.07
18.90
1.83
202339
45
0.015
24.5
16
33.3%
65.3%
SO-C-17-025
18.90
20.73
1.83
202340
46
0.015
31.2
22.5
32.6%
72.1%
SO-C-17-025
20.73
22.56
1.83
202342
98
0.015
36.5
20.7
15.3%
56.7%
SO-C-17-025
22.56
24.38
1.83
202343
114
0.05
46.8
26.1
43.9%
55.8%
SO-C-17-025
24.38
26.21
1.83
202344
121
0.04
58.3
32.5
33.1%
55.7%
SO-C-17-025
26.21
28.35
2.13
202345
323
0.25
51.4
28.7
77.4%
55.8%
Appendix B -
Location of sonic drill holes
on Candelaria project
To view an enhanced version of Appendix B, please visit:
https://orders.newsfilecorp.com/files/4730/34124_appendixb.jpg