Surge Copper Intersects 320 metres grading 0.46% CuEq from 10 metres depth including 88 metres grading 0.87% CuEq at the Berg Deposit
PO Box 10351 888-700 West Georgia Street, Vancouver, BC, Canada, V7Y 1G5
www.surgecopper.com
TSX-V: SURG
OTCQB: SRGXF
Frankfurt: G6D2
Telephone: +1 (604) 781-5454
Email: [email protected]
November 12, 2024
NEWS RELEASE
Surge Copper Intersects 320 metres grading 0.46% CuEq from 10 metres depth including
88 metres grading 0.87% CuEq at the Berg Deposit
November 12, 2024, Vancouver, British Columbia – Surge Copper Corp. (TSXV: SURG)
(OTCQB: SRGXF) (Frankfurt: G6D2) (“Surge” or the “Company”) is pleased to announce
assay results from drill holes BRG24-255 and 256, two of the ten holes completed during the 2024
field program at its 100%-owned Berg project located in central British Columbia, in addition to
hole BRG24-252, which was an initial test of the nearby exploration target referred to as Berg SW.
Both BRG24-255 and 256 were targeted to infill the western portion of the deposit to support
resource definition. An interactive 3D model including these results can be viewed here:
https://vrify.com/decks/17371?auth=ea4eda89-a10f-4e3b-b371-c90f4a2bb0da
Highlights
Hole BRG24-255 intersected 320 metres grading 0.46% CuEq2 (0.29% Cu, 0.048% Mo,
4.26 g/t Ag, and 0.024 g/t Au) from 10 metres depth including an interval within the
supergene sulfide zone of 88 metres grading 0.87% CuEq (0.57% Cu, 0.093% Mo, 5.34
g/t Ag, and 0.037 g/t Au) which also included an interval grading 1.22% CuEq over 28
metres (0.99% Cu, 0.052% Mo, 10.82 g/t Ag, 0.07 g/t Au) ( note: copper equivalent
“CuEq” is reported net of by-product recoveries, please see Table 1, footnote 2 for
details)
Hole BRG24-256 intersected 178 metres grading 0.40% CuEq (0.30% Cu, 0.017% Mo,
7.99 g/t Ag, 0.024 g/t Au) from 10 metres depth including an interval within the supergene
sulfide zone of 102 metres grading 0.44% CuEq (0.34% Cu, 0.019% Mo, 6.45 g/t Ag, and
0.023 g/t Au)
Both holes are expected to upgrade zones of Inferred resources on the outer and inner
margins of the mineralized zone
Leif Nilsson, Chief Executive Officer, commented: “ Holes 255 and 256 are another strong batch
of resource definition drilling results from the western side of the Berg deposit, with hole 255
infilling an almost 200 metre gap in drilling and hole 256 defining the known limits of the deposit
to the far northwest. We are also encouraged by the results from the initial drill test of the Berg
SW target, which turned up near surface mineralization several hundred metres outboard of the
Surge Copper Corp. 2
main deposit. The orientation of this hole was constrained somewhat by surface access, and the
results do not adequately explain the geophysical signature which is analogous to the main Berg
deposit. Thus, we will use the new data gathered to further evaluate the target for a potential
follow-up test next year.”
Table 1. Summary of Assay Results for Hole BRG24-255 and 256
Drill Hole From
(m)
To (m) Width
(m)1
CuEq
(%)2
Cu (%) Mo (%) Ag (g/t) Au (g/t)
BRG24-255 10 330 320 0.46 0.29 0.048 4.26 0.024
Including 42 130 88 0.87 0.57 0.093 5.34 0.037
Including 58 86 28 1.22 0.99 0.052 10.82 0.070
BRG24-256 10 188 178 0.40 0.30 0.017 7.99 0.024
Including 14 116 102 0.44 0.34 0.019 6.45 0.023
Table 2. Summary of Assay Results for Hole BRG24-252 (Berg SW Exploration Target)
BRG24-252 10 46 36 0.25 0.19 0.004 5.06 0.042
BRG24-252 116 124 8 0.15 0.11 0.003 5.33 0.021
BRG24-252 210 236 26 0.18 0.09 0.005 12.09 0.043
BRG24-252 370 382 12 0.50 0.17 0.001 46.38 0.192
BRG24-252 416 428 12 0.21 0.10 0.001 14.43 0.063
1. Width refers to drill hole intercepts; true widths have not been determined.
2. CuEq (copper equivalent) is provided for illustrative purposes only to express the combined abundance of
copper, molybdenum, silver, and gold, with secondary metals calculated net of assumed metallurgical recoveries
using deposit average recovery assumptions of 76% for molybdenum, 65% for silver, and 55% for gold. The
calculation uses metal prices of US$4.00/lb copper, US$15.00/lb molybdenum, US$23.00/oz silver, and
US$1,800/oz gold resulting in the formula: CuEq [%] = Cu [%] + 2.85 x Mo [%] + 0.0055 x Ag [g/t] + 0.3609 x Au
[g/t].
Surge Copper Corp. 3
Figure 1. Berg drill hole location map showing 2024 drill holes and the location of cross
sections B – B’ and C – C’.
Description of Resource Definition Holes BRG24-255 and BRG24-256
Hole BRG24-255 was oriented toward the southwest with a -50 degree dip and drilled to a total
depth of 426 metres. The hole was designed to upgrade a sizable zone of Inferred resources on
the outer margin of the deposit and better define the edge of mineralization in a zone with sparse
drilling.
Hole BRG24-255 encountered porphyritic intrusive rocks of the Berg Stock from the start of
bedrock at 10 metres to 59 metres depth and then encountered andesite package rocks with
minor intrusive dikes from 59 to 127 metres. From 127 metres to the end of the hole at 426 metres
depth the hole encountered various porphyritic intrusive rocks and breccias. The hole was variably
oxidized to about 42 metres depth and contained a strong secondary chalcocite blanket from 42
to 144 metres depth.
The hole returned 320 metres grading 0.46% copper equivalent (0.29% copper, 0.048%
molybdenum, 4.26 g/t silver, and 0.024 g/t gold) from the start of bedrock at 10 metres depth to
330 metres depth. An interval within the supergene sulfide zone from 42 to 130 metres depth
Surge Copper Corp. 4
returned higher grades of 0.87% copper equivalent over 88 metres (0.57% copper, 0.093%
molybdenum, 5.34 g/t silver, and 0.037 g/t gold) including a very high-grade interval from 58 to
86 metres depth returning 1.22% copper equivalent over 28 metres (0.99% copper, 0.052%
molybdenum, 10.82 g/t silver, and 0.070 g/ gold). The highest molybdenite grades occur within
the Berg Stock with copper grade occurring both within the Berg Stock and extending further
outboard into the surrounding wallrocks.
Figure 2. Cross section B – B’ showing drill holes BRG24-255. See Figure 1 for section
location.
Hole BRG24-256 was oriented toward the west-northwest with a -70 degree dip and drilled to a
total depth of 390 metres. The hole was designed to upgrade a sizable zone of Inferred resources
on the western outer margin of the deposit. Hole BRG24-256 encountered the andesite package
from the start of bedrock at 10 metres to the end of the hole at 390 metres depth. The hole was
variably oxidized from 10 to 12 metres depth then encountered variably developed secondary
chalcocite blanket from 12 to 106 metres depth.
The hole returned 178 metres grading 0.40% copper equivalent (0.30% copper, 0.017%
molybdenum, 7.99 g/t silver, and 0.024 g/t gold) from the start of bedrock at 10 metres depth to
188 metres depth. An interval within the supergene sulfide zone from 14 to 116 metres depth
returned 0.44% copper equivalent over 102 metres (0.34% copper, 0.019% molybdenum, 6.45
g/t silver, and 0.023 g/t gold).
Surge Copper Corp. 5
Figure 3. Cross section C – C’ showing hole BRG24-256. See Figure 1 for section
location.
Surge Copper Corp. 6
Figure 4. Photos from BRG24-255. Top: chalcocite coated fractures from high grade
supergene sulfide zones at 63 metres depth. Bottom: strong quartz-chalcopyrite-
molybdenite and quartz-molybdenite veins in biotite altered porphyritic intrusive with
rounded clasts of intrusive and andesite from 213 to 216 metres depth.
Surge Copper Corp. 7
Description of Hole BRG24-252 – Initial Test of Berg SW Exploration Target
Hole BRG24-252 was an exploration hole designed to test a coincidental geophysical and
geochemical anomaly located a few hundred meters southwest of the Berg deposit. Mapping at
the prospect in 2024 identified quartz-molybdenite veins within the pyrite hornfels, along with
patchy zones of chalcopyrite, and overall decreasing alteration intensity surrounding the target to
the, south, west, and east. Base-metal silver veins have been identified in the zone.
The hole was oriented toward the southwest with a -45 degree dip and drilled to a total depth of
450 metres. Multiple intervals of mineralization were encountered in the hole, with copper grades
lower than what is typically observed in the main Berg deposit, but with comparable molybdenum,
silver, and gold grades.
Very strong alteration containing quartz-molybdenite veinlets occurs within the upper portions of
the drill hole potentailly indicating proximity to a “porphyry centre”. The deeper portions of the hole
encountered highly magnetic hornfelsed and pyritic sedimentary/volcanic rocks characteristic of
a more distal setting and providing a useful exploration vector. The Berg style magnetic low in the
target area was not encountered in drilling and remains unexplained. This initial very encouraging
drill test of the target provides key information to help the Company determine the next steps to
further evaluate this promising exploration area.
The hole returned 36 metres grading 0.25% copper equivalent (0.19% copper, 0.004%
molybdenum, 5.06 g/t silver, and 0.042 g/t gold) from the start of bedrock at 10 metres depth to
46 metres depth. Mutiple narrow zones of mineralization were encountered highlighted by 12
metres grading 0.50% copper equivalent (0.17% copper, 0.001% molybdenum, 46.38 g/t silver,
and 0.192 g/t gold) from 370 to 382 metres depth.
Quality Control
All drill core is logged, photographed, and cut in half with a diamond saw. Half of the core is
bagged and sent to ALS Geochemistry in Kamloops, British Columbia for analysis (which is
ISO/IEC 17025 accredited), while the other half is archived and stored on site for verification and
reference purposes. Gold is assayed using a 30g fire assay method and 33 additional elements
are analyzed by Induced Coupled Plasma (ICP) utilizing a 4-acid digestion. Duplicate samples,
blanks, and certified standards are included with every sample batch and then checked to ensure
proper quality assurance and quality control.
Qualified Person
Dr. Shane Ebert P.Geo., is the Qualified Person for the Berg Project and the Ootsa Property as
defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 41-101")
and has approved the technical and scientific disclosure contained in this news release.
About Surge Copper Corp.
Surge Copper Corp. is a Canadian company that is advancing an emerging critical metals district
in a well-developed region of British Columbia, Canada. The Company owns a large, contiguous
mineral claim package that hosts multiple advanced porphyry deposits with pit-constrained NI 43-
101 compliant resources of copper, molybdenum, gold, and silver – metals which are critical
inputs to modern energy infrastructure and electrification technologies.
Surge Copper Corp. 8
The Company owns a 100% interest in the Berg Project, for which it announced a maiden PEA
in June 2023 outlining a large-scale, long-life project with a simple design and high outputs of
critical minerals located in a safe jurisdiction near world-class infrastructure. The PEA highlights
base case economics including an NPV8% of C$2.1 billion and an IRR of 20% based on long-
term commodity prices of US$4.00/lb copper, US$15.00/lb molybdenum, US$23.00/oz silver, and
US$1,800/oz gold. The Berg deposit contains pit-constrained 43-101 compliant resources of
copper, molybdenum, silver, and gold in the Measured, Indicated, and Inferred categories.
The Company also owns a 100% interest in the Ootsa Property, an advanced-stage exploration
project containing the Seel and Ox porphyry deposits located adjacent to the open pit Huckleberry
Copper Mine, owned by Imperial Metals. The Ootsa Property contains pit-constrained NI 43-101
compliant resources of copper, gold, molybdenum, and silver in the Measured, Indicated, and
Inferred categories.
On Behalf of the Board of Directors
“Leif Nilsson”
Chief Executive Officer
For further information, please contact:
Riley Trimble, Corporate Communications & Development
Telephone: +1 604 639 3852
Email: [email protected]
Twitter: @SurgeCopper
LinkedIn: Surge Copper Corp
https://www.surgecopper.com
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined
in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy
of this release.
This News Release contains forward-looking statements, which relate to future events. In some
cases, you can identify forward-looking statements by terminology such as "will", "may", "should",
"expects", "plans", or "anticipates" or the negative of these terms or other comparable terminology.
All statements included herein, other than statements of historical fact, are forward-looking
statements, including but not limited to: the commencement of drilling at the Berg Project and the
timing thereof; the surface exploration work at the Berg Project and the timing thereof; the size
and focus of the exploration drill program at the Berg deposit; the potential for program expansion
based on initial results of the exploration drill program; the objectives of the drill hole design; the
use of proceeds from the Top-Up Offering; and the Company’s plans regarding the Berg Project
and the Ootsa Property. These statements are only predictions and involve known and unknown
risks, uncertainties, and other factors that may cause the Company’s actual results, level of
activity, performance, or achievements to be materially different from any future results, levels of
activity, performance, or achievements expressed or implied by these forward-looking statements.
Such uncertainties and risks may include, among others, actual results of the Company's
exploration activities being different than those expected by management, delays in obtaining or
failure to obtain required government or other regulatory approvals, the ability to obtain adequate
financing to conduct its planned exploration programs, inability to procure labour, equipment, and
supplies in sufficient quantities and on a timely basis, equipment breakdown, impacts of the
current coronavirus pandemic, and bad weather. While these forward-looking statements, and
any assumptions upon which they are based, are made in good faith and reflect the Company's