Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

SURG.V ·

Surge Copper Corp. Intersects 0.5% Copper Equivalent over 202 Metres at Ootsa Including 0.77% Copper Equivalent over 52 Metres

Drill Results

S U R G E

C O P P E R C O R P

PO Box 10351 888 - 700 West Georgia Street Vancouver, BC V7Y 1G5 P: 604-718-5454 F:604-646-2054

SURGE COPPER CORP. INTERSECTS 0.5% COPPER EQUIVALENT OVER 202 METRES AT OOTSA

INCLUDING 0.77% COPPER EQUIVALENT OVER 52 METRES

August 9, 2018: Vancouver, British Columbia: Surge Copper Corp. (the “Company”) (SURG: TSX-

V) is pleased to announce that assay results for hole S18 -211 have been received and are

presented below. Hole S18-211 is the first hole from the Company’s 2018 Ootsa drilling program.

The Ootsa Property is an advanced stage copper -gold exploration project containing the East

Seel, West Seel , and Ox porphyry deposi ts, and is located adjacent to the Huckleberry Copper

Mine in British Columbia.

HIGHLIGHTS

• Hole S18 -211 intersect ed 202 metres of continuous mineralization grading 0.50%

copper equivalent (Cu Eq.) from the start of bedrock at 7.8 metres to the end of the hole

at 209.8 metres.

• Included in this interval is a higher -grade section containing 0.77% Cu Eq. over 52

metres.

• The hole demonstrates the potential to increase mineralization at East Seel around the

edges of the deposit.

Hole S18-211 was a 50 metre step out on the north side of the East Seel deposit and was drilled

back toward the deposit at an azimuth of 135 degrees and a dip of -50 degrees and ended within

the known deposit. The hole encountered mineralization at the start of bedrock at 7.8 metres

depth and mineralization was continuous to the end of the hole at 209.8 metres depth. Assay

results from the hole are summarized in the table below.

Summary of select drill intercepts – Hole S18-211

*Width refers to drill hole intercepts, true widths have not been determined.

**Cu Eq. (copper equivalent) has been used to express the combined value of copper, molybdenum, gold and silver

as a percentage of copper, and is provided for illustrative purposes only. No allowances have been made for recovery

Drill Hole From (m) To (m) Width (m)* Cu % Au g/t Ag g/t Cu Eq.%**

S18-211 7.8 209.8 202.0 0.26 0.31 1.32 0.50

including 44.0 182.0 138.0 0.31 0.37 1.53 0.59

including 124.0 176.0 52.0 0.42 0.47 1.73 0.77

losses that may occur should mining eventually result. Calculations use metal prices of US $2.50/lb copper, $1200/oz

gold, $15 silver, and $10/lb molybdenum using the formula Cu Eq.% = Cu% + (Au g/t x 0.701) + (Ag g/t x 0.0087) +

(Mo% x 4.01).

Dr. Shane Ebert President of the Com pany stated, “ hole S18-211 highlights the strong

mineralization at East Seel and was successful in demonstrating the potential to expand near-

surface mineralization along the edge s of the deposit through additional definition drilling .

Adding tonnage around the edges of East Seel would also improve the already low stripping ratio

identified in the 2016 Preliminary Economic Assessment (PEA) . A program focused on deposit

expansion and optimization will be conducted at a future date, for now the Company will focus

the bulk of the 2018 exploration program on testing geophysical and geochemical exploration

targets surrounding the East and West Seel deposits.”

Drill Program Update

An exploration and drilling program is currently underway at the Ootsa Property. A map showing

the location of 2018 drill holes is available in the map gallery on our website or by clicking here.

Hole S18 -211, released here, was the first hole of the program and assays were done on an

expedited basis. The second hole of the program, S18-212, was located 500 metres northeast of

the East Seel deposit and intersected a new zone of mineralization containing “breccia hosted”

sulfides including pyrite, chalcopyrite, and sphalerite. Photographs of the mineralization in hole

S18-212 are available in the photo gallery on our website at www.surgecopper.com or by clicking

here. Holes S18-214 and 215 were step outs from hole 212 to better understand the “breccia

hosted” mineralization. H ole S18 -213 targeted a coincident magnetic -chargeability-resistivity

geophysical anomaly located 650 metres east of the East Seel Deposit and the hole was

abandoned in an altered fault zone at 120.7 metres depth due to difficult drilling conditions .

Holes S18-216 and 217 both targeted a new area showing potential for por phyry style quartz -

chalcopyrite-molybdenite mineralization located between the East Seel deposit and the historic

Damascus high grade silver vein. The drill is currently set up on hole 217 but is shut down due to

mechanical issues.

All holes with the ex ception of the bottom portion of S18 -217 have been logged, sampled, and

sent for assay with results for hole S18-212 expected within 3 weeks.

About Surge Copper Corp.

The Company owns a 100% interest in the Ootsa Property, an advanced stage exploration project

containing the East Seel, West Seel and Ox porphyry deposits located adjacent to the open pit

Huckleberry Copper Mine. The property contains NI 43 -101 compliant resources of 224 million

tonnes in the Measured and Indicated categories with contained metals of 1.1 billion pounds of

copper and 1 million ounces of gold as summarized in the table below.

On February 9, 2016, the Company announced a positive Preliminary Economic Assessment (PEA)

for the Ootsa Property with potential for low capital cost, low risk and rapid pay back utilizing

existing infrastructure in the district with a contract mining and toll milling s cenario. The study

recommends the Company continue to advance the Ootsa Project with extended and advanced

technical studies with the intention of moving the project toward a production decision.

Ootsa Project Pit Constrained Mineral Resource Estimate at $8.50/t NSR Cut-off Value

Category Tonnes

(‘000’s)

CuEq

%

Cu

%

Au

g/t

Mo

%

Ag

g/t

CuEq

M lbs

Cu

M lbs

Au

K oz

Mo

M lbs

Ag

K oz

Measured 187,148 0.38 0.23 0.15 0.021 2.8 1,568 934 916 85 17,089

Indicated 37,041 0.35 0.21 0.12 0.023 2.8 286 175 146 19 3,368

M&I 224,189 0.37 0.22 0.15 0.021 2.8 1,854 1,109 1,062 104 20,457

The current technical report supporting the resource statement and PEA is available on SEDAR or the Company’s website at

www.surgecopper.com and has an effective date of January 2016. The resource estimate uses $8.50 per tonne NSR cut-off value.

Mineral resources are not mineral reserves and by definition do not demonstrate economic viability. There is no certainty that all

or any part of the mineral resource will be converted into mineral reserves. A ‘Measured Mineral Resource’ is that part of a mineral

resource for which quantity, grade or quality, densiti es, shape and physical characteristics are so well established that they can

be estimated with confidence sufficient to allow the appropriate application of technical and economic parameters, to support

production planning and evaluation of the economic vi ability of the deposit. An ‘Indicated Mineral Resource’ is that part of a

Mineral Resource for which quantity, grade or quality, densities, shape and physical characteristics can be estimated with a level

of confidence sufficient to allow the appropriate application of technical and economic parameters, to support mine planning and

evaluation of the economic viability of the deposit. Copper Equivalent (CuEq) calculations are based on base case metal price

(US$3/lb Cu, US$1260/oz Au, US$10.30/lb Mo, and U S$17/oz Ag) and process recovery assumptions, and take into account

smelter payable rates and refining costs. M&I = measured and indicated. The resource update and Preliminary Economic

Assessment was completed by P&E Mining Consultants Inc. in accordance with National Instrument 43 -101 Standards of

Disclosure for Mineral Projects.

Quality Control

All drill core is logged, photographed, and cut in half with a diamond saw. Half of the core is

bagged and sent to Activation Laboratories Ltd. in Kamloops British Columbia for analysis (which

is ISO/IEC 17025 accredited), while the other half is archived and stored on site for verification

and reference purposes. Gold is assayed using a 30g fire assay method and 37 additional

elements are analyzed by Induced Coupled Plasma (ICP) utilizing a 4 -acid digestion. Duplicate

samples, blanks, and certified standards are included with every sample batch and then checked

to ensure proper quality assurance and quality control.

Dr. Shane Ebert P.Geo. , is the Qualified Person for the Ootsa project as defined by National

Instrument 43-101 and has approved the technical disclosure contained in this news release.

ON BEHALF OF THE BOARD OF DIRECTORS

“Shane Ebert”

President and Chief Executive Officer

For Further information, please contact:

Telephone: 604-718-5454

Toll Free: 888-500-4587

[email protected]

http://www.surgecopper.com

Or

Don Mosher

Corporate Development

Telephone: 604-685-6465

[email protected]

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the

TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release .

This News Release contains forward-looking statements, which relate to future events. In some cases, you can identify

forward-looking statements by terminology such as "will", "may", "should", "expects", "plans", or "anticipates" or

the negative of these terms or other comparable terminology. These statements are only predictions and involve

known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, level of

activity, performance or achievements to be materially different from any future results, levels of activity,

performance, or achievements expressed or implied by these forward -looking-statements. Such uncertainties and

risks may include, among others, actual results of the Company's exploration activities bei ng different than those

expected by management, delays in obtaining or failure to obtain required government or other regulatory approvals

or financing, inability to procure equipment and supplies in sufficient quantities and on a timely basis, equipment

breakdown and bad weather. While these forward -looking statements, and any assumptions upon which they are

based, are made in good faith and reflect the Company's current judgment regarding the direction of its business,

actual results will almost always va ry, sometimes materially, from any estimates, predictions, projections,

assumptions or other future performance suggests herein. Except as required by applicable law, the Company does

not intend to update any forward-looking statements to conform these statements to actual results.