Rover Drills 32 Meters of Continuous Gold Averaging 13.6 grams per ton at Cabin Lake project, NWT Canada
Rover Drills 32 Meters of Continuous Gold Averaging 13.6 grams per ton at
Cabin Lake project, NWT Canada
VANCOUVER, British Columbia, Nov. 24, 2020 -- Rover Metals Corp. (TSXV: ROVR) (OTCQB: ROVMF) (“Rover Metals” or
the “Company”) further to its release of October 26, 2020, Rover Metals is pleased to announce that all fire assays from its
summer-fall 2020 exploration program at Cabin Lake have now been received.
Summer-Fall 2020 Cabin Lake Exploration Program
Nine diamond drill holes were completed at the 100% owned Cabin Lake Gold Project in early October 2020. The drill program
was designed to confirm and hopefully expand the historic high-grade gold intersects at the southern Bugow zone, in both a
parallel direction to historic holes (twinned holes) and oblique to the historic azimuths. Oblique holes were proposed to test the
possible influence of a regional deformation corridor, intersecting the Bugow Iron formation, and responsible for gold deposition,
therefore providing a better understanding of the structural and mineralizing controls, and to try to reproduce these mineralized
zones (shoots) in other sectors of the property where the Bugow Iron Formation is intersected and the same conditions repeat.
The October 26, 2020 release discussed the results from holes CL-20-01 and CL-20-03. This release discusses (1) the drill
program as a whole (all results); (2) the significance of the new, previously unreleased holes, as they relate to both the
historical holes and the new intersection of hole CL-20-01 (discovery of a potential ore body); and (3) an amendment to length
and average grades of previously released CL-20-03 (to slightly shorten the interval reported to adjust for economic grades).
See Table 1 below for a summary of assay highlights.
Drill hole CL-20-01 was drilled oblique (45 degrees to bedding) to historic drill hole 86-28 in an attempt to confirm the historic
high-grade intersect (14.98 g/t Au continuous average over 12.1m) and also to test the influence of shearing affecting the
Bugow Iron formation in both sulfidization and gold deposition. Hole CL-20-01 intersected the amphibolitic iron formation at a
depth of 24.29m, where the upper contact appears sheared, deformed and intensely sulfidized. The iron formation is also
flooded with quartz veining, likely related to a deformation/shearing event, and more than probable, related to the gold
mineralization. Later narrow pegmatite bodies intrude both the host rock and the mineralized zones, thus explaining the
dilutive low to nil gold values between high-grade gold intervals. The continuous long gold mineralized interval extends from
24.63m to 46.64m for a total of 22.0m averaging 7.94 gpt Au (all averages reported in this release are weighted). The 22.0
meter interval includes 2.78m averaging 18.50g/t Au. See Hole C-20-08, as well as Figure 1 – Drill Plan View, below below for
discussion of the intersection between holes CL20-01 and CL-20-08.
Drill hole CL-20-03 was planned with the intent of validating and verifying both of the historic intersects of holes 86-10 and 86-
11, as well as to intersect the historic Bugow Iron formation in between these historic holes after applying deviation corrections
in the historic database. Hole CL-20-03 intersected a long interval of continuous gold mineralization from the upper sheared
contact of the historic Bugow Iron formation at a depth of 41.199m to 54.84m, for a total of 13.7m averaging 6.97 g/t Au. The
13.7m intersect has a larger sub interval of continuous gold mineralization of 11.5m averaging 7.96 g/t Au.
Drill hole CL-20-05 was drilled oblique (45 degrees to bedding) to historic drill hole 86-26, and at a similar orientation to new
hole CL-20-01 in an attempt to confirm the historic high-grade intersect 12.54 g/t Au over 4.1m and also to test the influence of
shearing affecting the Bugow iron formation in both sulfidization and gold deposition. New hole CL-20-05 intersected the
sheared and sulphidized amphibolitic iron formation at a depth of 45.53m. The continuous gold mineralized interval extends
from 45.53m to 55.2m for a total of 9.67m with a weighted average of 4.15 g/t Au. The 9.67m interval includes a higher-grade
interval of 8.97 g/t Au over 3.11m (from 45.53m to 48.64m).
Drill hole CL-20-06 was drilled along strike of CL-20-03. This hole was collared on section to intersect with historic holes 86-
29 and 86-24, both of which had returned poor to nil historic gold assays. New hole CL-20-06 was a success and a new
discovery. It was drilled closer to surface than the historic hole and intersected a silicified and sheared sulphidic iron formation
from 13.01m to 20.5m that graded a continuous average of 7.55 g/t Au over 7.49m. The 7.49m interval included 9.98 g/t over
5.57m (13.1m to 18.6m), and 13.78 g/t over 2.82m (13.1m to 15.9m). The 7.49m intersection is significant because it
shows that there are significant mineralized gold shoots that were missed during the historic drill campaigns, and
it supports the new hypothesis that the high grade gold at the Bugow zone occurs closer to surface then previously
interpreted.
Drill hole CL-20-07 stepped-out to the south of new hole CL-20-06 and intersected and confirmed gold values drilled in historic
hole 86-14. A variably silicified and sheared iron formation was intersected from 28.0m to 52.93m. New hole CL-20-07 returned
higher grades than historically reported bringing an continuous average interval of 7.05 g/t Au over 4.98m (from 28.6m to
33.6m).
Drill hole CL-20-08 suggests the potential discovery of continuous high-grade gold ore body (see “Figure 1 – Drill Plan
View” below). New hole CL-20-08 was drilled oblique to historic drill holes 86-12 (15.77 g/t over 8.02m) and targeted the shear
zone intersected by new hole CL-20-01 (see above). CL-20-08 intersected gold mineralized iron formation at a depth of
18.04m. The continuous gold mineralized interval extends from 18.04m to 32m averaging 13.66 g/t Au over 31.9m. The 31.9m
interval includes 29.9m of continuous 14.45 g/t gold. Hole CL-20-08 supports the interpretation that gold mineralization
associated with shearing in the iron formation is continuous between the section collared at CL-20-01 and CL-20-08,
and boosts the overall average of continuous gold intersected by CL-20-01.
Drill holes CL-20-02, CL-20-04, and CL-20-09 did not return significant gold values. However, these drill holes continued
through the iron formation and are helping to provide a better understanding of the structures that control the gold
mineralization reported above.
Figure 1 – Drill Plan View
Judson Culter, CEO at Rover Metals, states “we are excited to get back to drilling at Cabin Lake, and the above featured
Bugow zone, as soon as Q1-2020. Our preliminary geological modelling suggests that the ‘DDH 86-28 to CL-20-01 to CL-20-08
to DDH86-19’ quadrant at Bugow is a conceptual high-grade ore body that needs to be drill tested at depth. The continuity of
gold mineralization in Holes CL-20-01 and CL-20-08 shows us that gold is associated with sheared intervals of the iron
formation and is not stratiform to bedding. The Summer 2020 drill confirmation of our exploration approach generates new
targets not only within the Bugow zone, but also within the other historic showings on the property (the Beaver Zone, Andrew
South Zone, and the Andrew North zone). We also now have opened the door to several greenfields targets on the project.”
Rover’s technical team, led by Raul Sanabria, will continue to work on updates to the company’s website in the coming days.
Updates will include more technical cross-sections and 3D modelling of all drill results at the Bugow zone to date. The
Company intends to share the assay certificates and the raw drill data on its website as well, along with geological
comparables for Northwest Territories archean load gold deposits that have statistically had a one-to-eight horizontal-to-vertical
ratio for mineralization at depth.
Table 1. Summary of Assay Results
CL-20-01
From(m) To(m) Interval(m) Sample ID Au ppm
24.63 24.93 0.30 V745603 1.45
24.93 25.40 0.47 V745604 5.38
25.40 25.90 0.50 V745606 11.50
25.90 26.27 0.37 V745607 16.20
26.27 26.71 0.44 V745608 1.88
26.71 27.38 0.67 V745609 3.18
27.38 28.00 0.62 V745610 0.05
28.00 29.01 1.01 V745611 2.54
29.01 29.31 0.30 V745612 11.40
29.31 29.35 0.04 V745613 8.36
29.35 29.76 0.41 V745614 5.75
29.76 30.40 0.64 V745615 5.21
30.40 30.90 0.50 V745616 5.06
30.90 31.35 0.45 V745618 20.50
31.35 31.88 0.53 V745619 11.30
31.88 32.46 0.58 V745620 9.40
32.46 32.59 0.13 V745621 0.65
32.59 32.87 0.28 V745622 2.26
32.87 34.00 1.13 V745623 10.20
34.00 34.40 0.40 V745624 12.80
34.40 34.90 0.50 V745625 4.52
34.90 35.43 0.53 V745626 4.86
35.43 35.93 0.50 V745627 4.32
35.93 36.43 0.50 V745629 1.18
36.43 37.00 0.57 V745630 3.55
37.00 37.50 0.50 V745631 13.60
37.50 38.04 0.54 V745632 13.20
38.04 38.54 0.50 V745633 9.56
38.54 39.04 0.50 V745634 6.51
39.04 39.65 0.61 V745635 4.83
39.65 40.10 0.45 V745636 3.88
40.10 40.70 0.60 V745638 6.58
40.70 41.20 0.50 V745639 4.81
41.20 41.70 0.50 V745640 7.14
41.70 42.20 0.50 V745641 12.40
42.20 42.70 0.50 V745642 18.70
42.70 43.05 0.35 V745643 27.30
43.05 43.28 0.23 V745644 1.35
43.28 43.86 0.58 V745645 20.80
43.86 44.48 0.62 V745646 22.50
44.48 44.89 0.41 V745647 0.55
44.89 45.72 0.83 V745648 4.55
45.72 46.24 0.52 V745649 3.65
46.24 46.64 0.40 V745650 2.19
CL-20-03
From(m) To(m) Interval(m) Sample ID Au ppm
41.19 42.06 0.87 V745769 1.29
42.06 42.53 0.47 V745770 4.72
42.53 43.00 0.47 V745771 23.6
43.00 43.46 0.46 V745772 11.6
43.46 43.99 0.53 V745773 3.35
43.99 44.35 0.36 V745774 3.06
44.35 44.97 0.62 V745775 1.72
44.97 45.44 0.47 V745776 2.12
45.44 45.95 0.51 V745777 4.99
45.95 46.48 0.53 V745778 8.41
46.48 46.94 0.46 V745779 23.3
46.94 47.44 0.50 V745781 23.5
47.44 47.97 0.53 V745782 5.45
47.97 48.57 0.60 V745783 18.1
48.57 49.00 0.43 V745784 16.9
49.00 49.65 0.65 V745785 10.8
49.65 49.95 0.30 V745786 5.13
49.95 50.45 0.50 V745787 3.86
50.45 50.95 0.50 V745788 0.086
50.95 51.45 0.50 V745789 0.048
51.45 52.10 0.65 V745790 0.64
52.10 52.60 0.50 V745791 6.28
52.60 53.07 0.47 V745792 1.82
53.07 53.55 0.48 V745794 5.1
53.55 54.50 0.95 V745795 1.83
54.50 54.84 0.34 V745796 2.32
CL-20-05
From(m) To(m) Interval(m) Sample ID Au ppm
45.53 46.22 0.69 Y030060 31.50
46.22 46.68 0.46 Y030061 0.08
46.68 47.18 0.50 Y030063 1.18
47.18 47.76 0.58 Y030064 1.84
47.76 48.18 0.42 Y030065 5.04
48.18 48.64 0.46 Y030066 5.09
48.64 49.08 0.44 Y030067 0.19
49.08 49.64 0.56 Y030068 0.67
49.64 50.24 0.60 Y030069 0.40
50.24 50.74 0.50 Y030104 0.95
50.74 51.34 0.60 Y030105 0.73
51.34 51.84 0.50 Y030106 1.85
51.84 52.37 0.53 Y030070 2.87
52.37 52.87 0.50 Y030071 0.37
52.87 53.17 0.30 Y030072 0.32
53.17 54.00 0.83 Y030073 1.40
54.00 54.49 0.49 Y030074 5.99
54.49 54.70 0.21 Y030075 0.50
54.70 55.20 0.50 Y030076 7.36
CL-20-06
From (m) To (m) Interval(m) Sample ID Au ppm
13.05 13.55 0.50 Y031107 16.90
13.55 13.85 0.30 Y031109 43.40
13.85 14.25 0.40 Y031110 2.42
14.25 15.00 0.75 Y031111 4.01
15.00 15.24 0.24 Y031112 14.50
15.24 15.54 0.30 Y031113 6.92
15.54 15.87 0.33 Y031114 23.80
15.87 16.40 0.53 Y031116 1.49
16.40 16.85 0.45 Y031117 1.87
16.85 17.64 0.79 Y031118 5.13
17.64 18.14 0.50 Y031119 16.20
18.14 18.62 0.48 Y031120 6.15
18.62 19.00 0.38 Y031121 0.67
CL-20-07
From(m) To(m) Interval(m) Sample ID Au ppm
28.60 29.14 0.54 Y031132 8.08
29.14 29.64 0.50 Y031133 30.70
29.64 30.14 0.50 Y031135 2.25
30.14 31.15 1.01 Y031136 2.26
31.15 32.17 1.02 Y031137 0.12
32.17 32.96 0.79 Y031138 8.64
32.96 33.58 0.62 Y031139 8.11
CL-20-08
From(m) To(m) Interval(m) Sample ID Au ppm
17.49 18.04 0.55 Y031167 2.58
18.04 18.57 0.53 Y031169 26.90
18.57 19.30 0.73 Y031170 13.60
19.30 19.94 0.64 Y031172 6.54
19.94 20.60 0.66 Y031173 18.20
20.60 20.90 0.30 Y031174 25.10
20.90 21.53 0.63 Y031175 28.00
21.53 22.00 0.47 Y031176 25.50
22.00 22.50 0.50 Y031177 20.80
22.50 22.94 0.44 Y031178 13.50
22.94 23.58 0.64 Y031180 7.44
23.58 23.88 0.30 Y031181 37.90
23.88 24.60 0.72 Y031182 13.20
24.60 25.00 0.40 Y031183 11.60
25.00 25.48 0.48 Y031184 31.10
25.48 25.81 0.33 Y031185 26.30
25.81 26.31 0.50 Y031186 17.00
26.31 26.84 0.53 Y031187 3.84
26.84 27.36 0.52 Y031188 5.14
27.36 28.10 0.74 Y031189 7.25
28.10 28.55 0.45 Y031190 11.60
28.55 29.09 0.54 Y031191 4.92
29.09 29.72 0.63 Y031192 12.10
29.72 30.38 0.66 Y031194 18.60
30.38 30.93 0.55 Y031195 14.70
CL-20-08 (continued)
From(m) To(m) Interval(m) Sample ID Au ppm
30.93 31.49 0.56 Y031196 8.36
31.49 32.01 0.52 Y031197 27.50
32.01 32.51 0.50 Y031198 20.60
32.51 33.00 0.49 Y031200 16.30
33.00 33.53 0.53 Y031501 2.46
33.53 34.13 0.60 Y031502 0.83
34.13 34.53 0.40 Y031503 1.52
34.53 35.06 0.53 Y031504 16.50
35.06 35.56 0.50 Y031505 21.40
35.56 36.00 0.44 Y031506 11.00
36.00 36.58 0.58 Y031507 15.20
36.58 37.22 0.64 Y031510 13.80
37.22 37.76 0.54 Y031511 5.45
37.76 38.48 0.72 Y031512 4.13
38.48 39.05 0.57 Y031513 9.00
39.05 39.65 0.60 Y031514 12.50
39.65 40.00 0.35 Y031515 9.50
40.00 40.50 0.50 Y031516 26.30
40.50 41.04 0.54 Y031517 19.30
41.04 41.50 0.46 Y031518 22.00
41.50 42.10 0.60 Y031519 11.80
42.10 43.15 1.05 Y031520 2.25
43.15 43.60 0.45 Y031521 0.35
43.60 44.02 0.42 Y031522 6.89
44.02 44.65 0.63 Y031523 20.70
44.65 45.17 0.52 Y031524 17.90
45.17 45.75 0.58 Y031526 21.90
45.75 46.23 0.48 Y031527 20.00
46.23 46.73 0.50 Y031528 6.29
46.73 47.29 0.56 Y031529 31.90
47.29 47.93 0.64 Y031530 22.40
47.93 48.45 0.52 Y031531 1.81
48.45 48.90 0.45 Y031532 1.94
Technical Information
Drill core is cut with half sent to AGAT Laboratories Inc. (AGAT) for drying and crushing to -2 mm, with a 1.00 kg split
pulverized to -75 µm (200#). AGAT is an ISO 17025 accredited laboratory. A 50 g charge is Fire Assayed and analyzed using
an AAS finish for Gold. Samples above 10.00 g/t Au are analyzed by Fire Assay with a gravimetric finish and selected
samples with visible gold or high-grade mineralization are assayed by Metallic Screen Fire Assay on a 1.00 kg sample.
True thicknesses of the intervals reported herein reported have not been calculated, therefore, all intervals are reported as drill
core intervals and should be considered apparent thicknesses. All historic and 2020 program gold grade averages are reported
at weighted averages.
Technical information in this news release has been approved by Raul Sanabria, M.Sc., P.Geo., Technical Advisor and
shareholder of Rover Metals Corp. and a Qualified Person for the purposes of National Instrument 43-101.
About Rover Metals
Rover Metals is a precious metals exploration company specialized in North American precious metal resources, that is
currently advancing the gold potential of its existing projects.
You can follow Rover Metals on its social media channels:
Twitter: https://twitter.com/rovermetals
LinkedIn: https://www.linkedin.com/company/rover-metals/
Facebook: https://www.facebook.com/RoverMetals/
for daily company updates and industry news, and
YouTube: https://www.youtube.com/channel/UCJsHsfag1GFyp4aLW5Ye-YQ?view_as=subscriber
for corporate videos.
Website: https://www.rovermetals.com/
ON BEHALF OF THE BOARD OF DIRECTORS
“Judson Culter”
Chief Executive Officer and Director
For further information, please contact:
Judson Culter
Email: [email protected]
Phone: (604) 449-5347
Statement Regarding Forward-Looking Information
This news release contains statements that constitute "forward-looking statements." Such forward-looking statements involve
known and unknown risks, uncertainties and other factors that may cause Rover's actual results, performance or
achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements
expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical
facts and are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes," "intends,"
"estimates," "projects," "potential" and similar expressions, or that events or conditions "will," "would," "may," "could" or
"should" occur. There can be no assurance that such statements will prove to be accurate. Actual results and future events
could differ materially from those anticipated in such statements, and readers are cautioned not to place undue reliance on
these forward-looking statements. Any factor could cause actual results to differ materially from Rover’s expectations. Rover
undertakes no obligation to update these forward-looking statements in the event that management's beliefs, estimates or
opinions, or other factors, should change.
THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS NEWS RELEASE REPRESENTS THE EXPECTATIONS
OF THE COMPANY AS OF THE DATE OF THIS NEWS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE
AFTER SUCH DATE. READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION
AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE THE COMPANY MAY ELECT
TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED
IN ACCORDANCE WITH APPLICABLE LAWS.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION PROVIDER (AS THAT TERM IS DEFINED IN THE
POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OF THIS
RELEASE.