Adventus and Salazar Announce Drilling Results at the El Domo Deposit Highlighted BY 11.55% Copper Equivalent over 16.86 Metres and Provide a Regional Exploration Update FOR the Curipamba Project
Date:
News Release:
Ticker Symbols:
May 12, 2021
21-12
ADZN (TSXV), ADVZF (OTCQX), SRL (TSXV) SRLZF (OTCQB)
– 1 of 8 –
ADVENTUS AND SALAZAR ANNOUNCE DRILLING RESULTS AT THE EL DOMO DEPOSIT
HIGHLIGHTED BY 11.55% COPPER EQUIVALENT OVER 16.86 METRES AND PROVIDE
A REGIONAL EXPLORATION UPDATE FOR THE CURIPAMBA PROJECT
Toronto, May 1 2, 2021 – Adventus Mining Corporation (“Adventus”) (TSX-V: ADZN , OTCQX: ADVZF ) and Salazar
Resources Limited (“Salazar”) (TSX-V: SRL, OTCQB: SRLZF) (collectively the “Partners”) are pleased to announce additional
infill drilling results from the El Domo volcanogenic massive sulphide deposit (“El Domo”) located within the 21,537-
hectare Curipamba project in central Ecuador.
Highlights – Drill Results from the El Domo Deposit at Curipamba:
• CURI-378 intersected 16.86 metres of 3.38% copper, 8.07 g/t gold, 8.46% zinc, 138.6 g/t silver, and 0.81% lead for
11.55% CuEq – including 1.44 metres of 5.87% copper, 24.56 g/t gold, 8.94% zinc, 339.5 g/t silver, and 0.49% lead
for 24.86% CuEq
• CURI-377 intersected 21.04 metres of 6.37% copper, 2.42 g/t gold, 4.46% zinc, 41.8 g/t silver, and 0.24% lead for
9.37% copper equivalent (“CuEq”) – including 4.20 metres of 13.43% copper, 1.34 g/t gold, 6.20% zinc, 17.5 g/t
silver, and 0.01% lead for 16.08% CuEq
• CURI-390 intersected 11.90 metres of 3.97% copper, 5.65 g/t gold, 4.59% zinc, 85.9 g/t silver, and 0.41% lead for
9.18% CuEq – including 1.80 metres of 6.50% copper, 22.68 g/t gold, 18.76% zinc, 388.2 g/t silver, and 2.13% lead
for 28.00% CuEq
• Restarted regional exploration drilling on the El Panecillo target – approximately 1.5 km east of El Domo
Drill hole CURI-377 intersected mineralized grainstone with massive sulphide clasts in the immediate hanging wall of the
semi-massive to massive sulphide from 46.05 to 47.26 metres, grading 0.74% copper, 0.42 g/t gold, 0.34% zinc, 11.8 g/t
silver, and 0.05% lead (1.18% CuEq). Semi-massive to massive sulphide mineralization was intersected from 47.26 to 68.30
metres, grading 6.37% copper, 2.42 g/t gold, 4.46% zinc, 41.8 g/t silver and 0.24% lead (9.37% CuEq). A higher-grade subset
was intersected from 60.92 to 65.12 metres, grading 13.43% copper, 1.34 g/t gold, 6.20% zinc, 17.5 g/t silver, and 0.01%
lead (16.08% CuEq).
Drill Hole
From
(m)
To
(m)
Thickness
(m)
Cu
(%)
Au
(g/t)
Zn
(%)
Ag
(g/t)
Pb
(%)
CuEq (1)
(%)
Approx. True
Thickness (m)
CURI-377 46.05 47.26 1.21 0.74 0.42 0.34 11.8 0.05 1.18 1.03
47.26 68.30 21.04 6.37 2.42 4.46 41.8 0.24 9.37 17.88
including 60.92 65.12 4.20 13.43 1.34 6.20 17.5 0.01 16.08 3.57
(1) Metal equivalency based on US$4.86/lb Cu, US$1,838.90/oz Au, US$1.38/lb Zn, US$27.43/oz Ag and US$1.02/lb Pb; noting that no adjustments were made
in the metal equivalency calculation for metal recovery. Prices taken from 6 -month contracts for precious metals and 3 -month contracts for base metals
from the London Metal Exchange, dated May 10, 2021.
CURI-378 intersected mineralized grainstone with massive sulphide clasts in the immediate hanging wall of the semi-
massive to massive sulphide from 50.57 to 58.52 metres, grading 0.31% copper, 0.68 g/t gold, 0.68% zinc, 16.7 g/t silver,
and 0.05% lead (1.02% CuEq). A higher-grade subset was intersected from 56.59 to 58.52 metres, grading 0.95% copper,
2.38 g/t gold, 1.95% zinc, 55.9 g/t silver and 0.14% lead (3. 31% CuEq). Semi-massive to massive sulphide mineralization
was intersected from 64.45 to 81.31 metres, grading 3.38% copper, 8.07 g/t gold, 8.46% zinc, 138.6 g/t silver and 0.81%
lead (11.55% CuEq). Two higher-grade subsets occur in this intercept, from 64.45 to 65.89 metres and then from 69.68 to
Date:
News Release:
Ticker Symbols:
May 12, 2021
21-12
ADZN (TSXV), ADVZF (OTCQX), SRL (TSXV) SRLZF (OTCQB)
– 2 of 8 –
81.31 metres. The first intercept is semi-massive sulphide mineralization grading 5.87% copper, 24.56 g/t gold, 8.94% zinc,
339.5 g/t silver and 0.49% lead ( 24.86% CuEq). The second intercept is massive sulphide mineralization grading 3.87%
copper, 7.04 g/t gold, 9.68% zinc, 120.5 g/t silver and 0.87% lead (11.68% CuEq).
Drill Hole
From
(m)
To
(m)
Thickness
(m)
Cu
(%)
Au
(g/t)
Zn
(%)
Ag
(g/t)
Pb
(%)
CuEq (1)
(%)
Approx. True
Thickness (m)
CURI-378 50.57 58.52 7.95 0.31 0.68 0.68 16.7 0.05 1.02 5.17
Including 56.59 58.52 1.93 0.95 2.38 1.95 55.9 0.14 3.31 1.25
64.45 81.31 16.86 3.38 8.07 8.46 138.6 0.81 11.55 10.96
Including 64.45 65.89 1.44 5.87 24.56 8.94 339.5 0.49 24.86 0.94
including 69.68 81.31 11.63 3.87 7.04 9.68 120.5 0.87 11.68 7.56
(2) Metal equivalency based on US$4.86/lb Cu, US$1,838.90/oz Au, US$1.38/lb Zn, US$27.43/oz Ag and US$1.02/lb Pb; noting that no adjustments were made
in the metal equivalency calculation for metal recovery. Prices taken from 6 -month contracts for precious metals and 3 -month contracts for base metals
from the London Metal Exchange, dated May 10, 2021.
CURI-379 intersected mineralized grainstone with massive sulphide clasts in the immediate hanging wall of the massive
sulphide from 111.24 to 119.35 metres, grading 0.03% copper, 1.37 g/t gold, 0.05% zinc, 5.1 g/t silver, and 0.01% lead
(0.85% CuEq). The drill hole intersected two intervals of m assive sulphide mineralization , first from 119.35 to 132.75
metres, grading 2.59% copper, 1.55 g/t gold, 0.46% zinc, 11.5 g/t silver, and 0.03% lead (3.68% CuEq) with a higher-grade
subset from 126.38 to 131.00 metres, grading 3.71% copper, 1.70 g/t gold, 0.50% zinc, 15.0 g/t silver and 0.04% lead
(4.92% CuEq). The second intercept of massive sulphide mineralization occurs from 141.00 to 143.87 metres, grading
5.71% copper, 0.97 g/t gold, 0.09% zinc, 12.2 g/t silver and 0.03% lead (6. 38% CuEq). Between the two massive sulphide
intercepts is a section of mineralized felsic autoclastic volcanic rocks was intersected from 132.75 to 141.00 metres,
grading 0.16% copper, 1.22 g/t gold, 0.08% zinc, 3.6 g/t silver, and 0.01% lead (0.89% CuEq).
Drill Hole
From
(m)
To
(m)
Thickness
(m)
Cu
(%)
Au
(g/t)
Zn
(%)
Ag
(g/t)
Pb
(%)
CuEq (1)
(%)
Approx. True
Thickness (m)
CURI-379 111.24 119.35 8.11 0.03 1.37 0.05 5.1 0.01 0.85 5.27
119.35 132.75 13.40 2.59 1.55 0.46 11.5 0.03 3.68 8.71
including 119.35 120.35 1.00 11.35 3.41 0.19 21.7 0.04 13.47 0.65
including 126.38 131.00 4.62 3.71 1.70 0.50 15.0 0.04 4.92 3.00
including 132.75 141.00 8.25 0.16 1.22 0.08 3.6 0.01 0.89 5.36
141.00 143.87 2.87 5.71 0.97 0.09 12.2 0.03 6.38 1.87
(3) Metal equivalency based on US$4.86/lb Cu, US$1,838.90/oz Au, US$1.38/lb Zn, US$27.43/oz Ag and US$1.02/lb Pb; noting that no adjustments were made
in the metal equivalency calculation for metal recovery. Prices taken from 6 -month contracts for precious metals and 3 -month contracts for base metals
from the London Metal Exchange, dated May 10, 2021.
CURI-390 intersected mineralized grainstone with massive sulphide clasts in the immediate hanging wall of the semi-
massive to massive sulphide from 95.07 to 99.80 metres, grading 0.04% copper, 1.10 g/t gold, 0.04% zinc, 7.8 g/t silver,
and 0.02% lead (0 .73% CuEq). Massive sulphide mineralization was intersected from 99.80 to 111.70 metres, grading
3.97% copper, 5.65 g/t gold, 4.59% zinc, 85.9 g/t silver and 0.41% lead (9. 18% CuEq). A higher-grade subset occurs from
99.80 to 101.60 metres, grading 6.50% copper, 22.68 g/t gold, 18.76% zinc, 388.2 g/t silver and 2.13% lead (28.00% CuEq).
A section of mineralized footwall felsic autoclastic volcanic rocks was intersected from 111.70 to 137.70 metres, grading
0.19% copper, 0.48 g/t gold, 0.09% zinc, and 5.3 g/t silver and 0.01% lead (0.52% CuEq). A higher-grade subset occurs from
111.70 to 120.00 metres, grading 0.34% copper, 1.01 g/t gold, 0.26% zinc, 10.0 g/t silver and 0.02% lead (1.06% CuEq).
Date:
News Release:
Ticker Symbols:
May 12, 2021
21-12
ADZN (TSXV), ADVZF (OTCQX), SRL (TSXV) SRLZF (OTCQB)
– 3 of 8 –
Drill Hole
From
(m)
To
(m)
Thickness
(m)
Cu
(%)
Au
(g/t)
Zn
(%)
Ag
(g/t)
Pb
(%)
CuEq (1)
(%)
Approx. True
Thickness (m)
CURI-390 95.07 99.80 4.73 0.04 1.10 0.04 7.8 0.02 0.73 3.07
99.80 111.70 11.90 3.97 5.65 4.59 85.9 0.41 9.18 7.74
including 99.80 101.60 1.80 6.50 22.68 18.76 388.2 2.13 28.00 1.17
111.70 137.70 26.00 0.19 0.48 0.09 5.3 0.01 0.52 16.90
including 111.70 120.00 8.30 0.34 1.01 0.26 10.0 0.02 1.06 5.40
(4) Metal equivalency based on US$4.86/lb Cu, US$1,838.90/oz Au, US$1.38/lb Zn, US$27.43/oz Ag and US$1.02/lb Pb; noting that no adjustments were made
in the metal equivalency calculation for metal recovery. Prices taken from 6 -month contracts for precious metals and 3 -month contracts for base metals
from the London Metal Exchange, dated May 10, 2021.
CURI-391 intersected semi-massive sulphide mineralization from 52.50 to 53.80 metres, grading 1.89% copper, 2.53 g/t
gold, 19.54% zinc, 90.0 g/t silver, and 0.44% lead (9.68% CuEq). A section of weakly mineralized footwall felsic autoclastic
volcanic rocks was intersected from 53.80 metres to 70.60 metres, grading 0.05% copper, 0.18 g/t gold, 0.38% zinc, and
5.0 g/t silver, and 0.04% lead (0.31% CuEq).
Drill Hole
From
(m)
To
(m)
Thickness
(m)
Cu
(%)
Au
(g/t)
Zn
(%)
Ag
(g/t)
Pb
(%)
CuEq (1)
(%)
Approx. True
Thickness (m)
CURI-391 52.50 53.80 1.30 1.89 2.53 19.54 90.0 0.44 9.68 0.85
53.80 70.60 16.80 0.05 0.18 0.38 5.0 0.04 0.31 10.92
(5) Metal equivalency based on US$4.86/lb Cu, US$1,838.90/oz Au, US$1.38/lb Zn, US$27.43/oz Ag and US$1.02/lb Pb; noting that no adjustments were made
in the metal equivalency calculation for metal recovery. Prices taken from 6 -month contracts for precious metals and 3 -month contracts for base metals
from the London Metal Exchange, dated May 10, 2021.
Drill holes CURI-371, CURI-375, CURI-376, CURI-380 and CURI-383 were designed for collection of geomechanical data to
assist in future mine planning, as part of the ongoing feasibility study. Drill hole CURI-388 intersected a low-grade section
of footwall mineralized felsic autoclastic volcanic rocks 102.04 to 112.39 metres, grading 0.04% copper, 0. 17 g/t gold,
0.09% zinc, 4.0 g/t silver and 0.02% lead (0.21% CuEq) for an approximate true thickness of 6.73 metres.
All results from the completed infill definition drilling program are to be used in updating the Mineral Resource estimate
for El Domo in 2021. The updated Mineral Resource estimate will be part of the ongoing feasibility study for the
development of El Domo (see December 2, 2020 news release). Figure 1 illustrates the drill locations for the results of the
ten drill holes outlined in this news release and the holes currently in the assay lab, or in progress. Drill collar location
coordinates are summarized for the infill and geomechanical drilling programs in Table 1 at the end of this news release.
For reference, the last NI 43-101 Mineral Resource estimate for El Domo was published as part of the preliminary economic
assessment report titled: “Technical Report on the Preliminary Economic Assessment for the Curipamba Project – El Domo
Deposit, Central Ecuador”, with an effective date of June 14, 2019 on SEDAR.
Curipamba – Regional Exploration Drilling Program Update
Upon completion of infill and geomechanical drilling required to support the ongoing Feasibility Study with a Mineral
Resource estimate update and the provision of metallurgical samples (see December 2, 2020 news release), a drill rig was
tasked to restart the regional exploration drilling program. A total of 4,000 metres is budgeted in 2021 with drilling having
re-commenced on the El Panecillo target in late April 2021, approximately 1.5 kilometres east of El Domo. El Panecillo is a
VMS target being drilled for the first time in the same favourable volcanic-sedimentary strata that hosts El Domo. The first
drill hole, CREG-004, has been completed with CREG-005 in progress. Results from the regional exploration work program
Date:
News Release:
Ticker Symbols:
May 12, 2021
21-12
ADZN (TSXV), ADVZF (OTCQX), SRL (TSXV) SRLZF (OTCQB)
– 4 of 8 –
will be released after receipt from the laboratory and when results pass a rigorous internal quality assurance and quality
control (“QAQC”) processes.
The regional exploration drilling program started in October 2020 approximately 8 km southwest of El Domo (see
December 21, 2020 news release) on the La Vaquera and Sesmo Sur targets. Two drill holes were completed on the La
Vaquera target and one drill hole was completed on the Sesmo Sur target. Although propylitic alteration was observed in
all three drill holes for these intrusion -related targets, no significant mineralization was encountered. As a result, the
technical team has temporarily suspended drilling on the four remaining platforms in the La Vaquera-Sesmo Sur area while
they conduct additional work to re-evaluate and better understand the favourable geology and mineral potential to
determine the next steps.
Analytical results from the regional exp loration drill holes will be released when they pass internal QAQC procedures.
Figure 2 illustrates the drill locations for the results of the five drill holes outlined in this news release and the holes
currently in the assay lab, or in progress. Drill collar location coordinates are summarized for the regional exploration
drilling program in Table 2 at the end of this news release.
Technical Information and QAQC
The Curipamba project work program is being managed and reviewed by Vice President Exploration, Jason Dunning, M.Sc.,
P.Geo., a Qualified Person within the meaning of NI 43 -101. Salazar staff collect and process samples that are securely
sealed and shipped to Bureau Veritas (“BV”) in Quito for sample preparation that includes crushing and milling to prepare
pulps that are then split for shipment to their facility in Lima, Peru or Vancouver, Canada for analysis. All assay data have
undergone internal validation of QAQC; noting there is an established sampling control program with blind insertion of
assay blanks, certified industry standards and sample duplicates for the Curipamba project. A QAQC program is also in
place at BV and includes insertion of blanks, standards, and duplicate reanalysis of selected samples. BV’s quality system
complies with the requirements for the International Standards ISO 9001:2000 and ISO 17025: 1999. At BV, samples from
the El Domo infill drilling have gold analyzed by classic fire assay techniques with an AAS finish, while silver and base metals
are analyzed by a 44 -element aqua regia technique with ICP-AES finish. For regional drilling, silver and base metals are
analyzed by a 45 -element 4 acid technique with ICP -MS finish. Overlimit protocols are in place for gold, silv er, copper,
lead, and zinc.
Qualified Person
The technical information of this news release has been reviewed and verified as accurate by Mr. Jason Dunning, M.Sc.,
P.Geo., Vice President Exploration for Adventus, a non-Independent Qualified Person, as defined by NI 43-101.
About Adventus
Adventus Mining Corporation is an Ecuador focused copper -gold exploration and development company. Its strategic
shareholders include Altius Minerals Corporation, Greenstone Resources LP, Wheaton Precious Metals Corp., and the
Nobis Group of Ecuador. Adventus is advancing the El Domo copper -gold project through a feasibility study, while
exploring the broader Curipamba district. In addition, Adventus is engaged in a country-wide exploration alliance with its
partners in Ecuador, which has incorporated the Pijili and Santiago copper-gold porphyry projects to date. Adventus also
controls an exploration project port folio in Ireland with South32 Limited as funding partner as well as an investment
portfolio of equities in several exploration companies. Adventus is based in Toronto, Canada, and is listed on the TSX
Venture Exchange under the symbol ADZN and trades on the OTCQX under the symbol ADVZF.
Date:
News Release:
Ticker Symbols:
May 12, 2021
21-12
ADZN (TSXV), ADVZF (OTCQX), SRL (TSXV) SRLZF (OTCQB)
– 5 of 8 –
About Salazar
Salazar Resources Limited is focused on creating value and positive change through discovery, exploration, and
development in Ecuador. The team has an unrivalled understanding of the geology in-country and has played an integral
role in the discovery of many of the major projects in Ecuador, including the two newest operating gold and copper mines.
Salazar Resources has a wholly owned pipeline of copper-gold exploration projects across Ecuador with a strategy to make
another commercial discovery and farm-out non-core assets. The Company actively engages with Ecuadorian communities
and together with the Salazar family it co -founded The Salazar Foundation, an independent non -profit organization
dedicated to sustainable progress through economic development. The Company already has carried interests in three
projects. At its maiden discovery, Curipamba, Salazar Re sources has a 25% stake fully carried through to production. At
two copper-gold porphyry projects, Pijili and Santiago, the Company has a 20% stake fully carried through to a construction
decision.
Neither the TSX Venture Exchange nor its Regulation Serv ices Provider (as that term is defined in the policies of the TSX Venture
Exchange) accepts responsibility for the adequacy or accuracy of this news release.
This press release contains “forward -looking information” within the meaning of applicable Canadian securities laws. Any statements
that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assum ptions or
future events or performance (often, but not always, identified by words or phrases s uch as “believes”, “anticipates”, “expects”, “is
expected”, “scheduled”, “estimates”, “pending”, “intends”, “plans”, “forecasts”, “targets”, or “hopes”, or variations of such words and
phrases or statements that certain actions, events or results “may”, “c ould”, “would”, “will”, “should” “might”, “will be taken”, or
“occur” and similar expressions) are not statements of historical fact and may be forward -looking statements.
Forward-looking information herein includes, but is not limited to, statements tha t address activities, events, or developments that
Adventus and Salazar expect or anticipate will or may occur in the future. Although Adventus and Salazar have attempted to identify
important factors that could cause actual actions, events, or results to differ materially from those described in forward -looking
information, there may be other factors that cause actions, events or results not to be as anticipated, estimated , or intended. There
can be no assurance that such information will prove to be accurate, and actual results and future events could differ materially from
those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information. Adventus
and Salazar undertake to update any forward-looking information except in accordance with applicable securities laws.
For further information from Adventus, please contact Christian Kargl- Simard, President and Chief Executive Officer, at
+1-416-230-3440 or [email protected]. Please also visit the Adventus website at www.adventusmining.com
and LinkedIn page at https://www.linkedin.com/company/adventus-mining-corporation.
For further information from Salazar, please contact [email protected].
Date:
News Release:
Ticker Symbols:
May 12, 2021
21-12
ADZN (TSXV), ADVZF (OTCQX), SRL (TSXV) SRLZF (OTCQB)
– 6 of 8 –
Table 1: Drill Collar Information for Infill Drill Holes at El Domo
Hole ID EAST NORTH ELEV AZIMUTH DIP DEPTH COMMENT
CURI-391 655001 9854898 882 165 -65 70.6 Successfully completed per design
CURI-390 695109 9855451 953 170 -79 137.7 Successfully completed per design
CURI-389 694999 9855351 908 338 -70 64.5 Successfully completed per design
CURI-388 695051 9855474 930 165 -50.6 143.0 Successfully completed per design
CURI-387 695051 9855474 930 26 -49 112.3 Successfully completed per design
CURI-386 695100 9855600 943 230 -65 90.2 Successfully completed per design
CURI-385 695094 9855482 940 45 -54 128.0 Successfully completed per design
CURI-384 695054 9855642 923 136 -54 110.6 Successfully completed per design
CURI-383(1) 695373 9855400 995 270 -65 210.4 Successfully completed per design
CURI-382 695094 9855482 940 64 -48 156.5 Successfully completed per design
CURI-381 695214 9855602 949 197 -57 154.4 Successfully completed per design
CURI-380(1) 695375 9855000 1030 270 -70 250.1 Successfully completed per design
CURI-379 695094 9855482 940 167 -48 153.8 Successfully completed per design
CURI-378 695054 9855122 893 181 -57 113.1 Successfully completed per design
CURI-377 695054 9855122 893 55 -51 92.3 Successfully completed per design
CURI-376(1) 695361 9855100 1087 270 -70 275.4 Successfully completed per design
CURI-375(1) 695333 9855200 1057 270 -75 250.1 Successfully completed per design
CURI-374 695006 9855134 883 296 -45 120.6 Successfully completed per design
CURI-373 695094 9855482 940 103 -48 197.0 Successfully completed per design
CURI-372 695041 9854913 888 38 -45 106.3 Successfully completed per design
CURI-371(1) 695399 9855298 1016 270 -65 225.7 Successfully completed per design
CURI-370 695040 9854913 888 231 -74 86.2 Successfully completed per design
CURI-369 695094 9855482 940 142 -48 168.7 Successfully completed per design
CURI-368 695041 9854913 888 331 -58 113.6 Successfully completed per design
CURI-367 695006 9855134 883 196 -45 102.2 Successfully completed per design
CURI-366 694975 9854918 872 186 -72 74.5 Successfully completed per design
CURI-365 694934 9855242 874 151 -72 69.5 Successfully completed per design
CURI-364-A 695131 9855402 946 108 -60 121.8 Successful but lost in fault zone
CURI-364 695134 9855402 946 108 -60 130.4 Successful but lost in fault zone
CURI-363 694934 9855242 874 180 -54 95.0 Successfully completed per design
CURI-362 694975 9854918 872 288 -61 88.9 Successfully completed per design
CURI-361 695134 9855402 946 75 -54 172.8 Successfully completed per design
CURI-360 694934 9855242 874 25 -48 83.0 Successfully completed per design
CURI-359 695006 9855134 883 349 -69 86.5 Successfully completed per design
CURI-358 694934 9855082 867 255 -54 113.0 Successfully completed per design
CURI-357 695057 9855149 894 229 -74 105.0 Successfully completed per design
CURI-356 695006 9855134 883 241 -77 110.6 Successfully completed per design
CURI-355 695057 9855149 894 36 -45 86.3 Successfully completed per design
CURI-354 695057 9855149 894 55 -54 81.0 Successfully completed per design
CURI-353 695094 9855122 908 192 -45 97.4 Successfully completed per design
CURI-352 695057 9855149 894 306 -77 78.0 Successfully completed per design
CURI-351 695057 9855149 894 338 -59 77.0 Successfully completed per design
CURI-350 695094 9855122 908 180 -57 85.7 Successfully completed per design
CURI-349 695094 9855122 908 263 -51 130.2 Successfully completed per design
CURI-348 695094 9855082 910 276 -45 135.1 Successfully completed per design
CURI-347 695094 9855082 910 105 -54 91.0 Successfully completed per design
CURI-346 695094 9855082 910 52 -69 83.4 Successfully completed per design
CURI-345 695094 9855082 910 142 -48 95.7 Successfully completed per design
CURI-344 695094 9855082 910 360 -60 84.1 Successfully completed per design
CURI-343 695094 9855082 910 192 -45 142.0 Successfully completed per design
CURI-342 695041 9854913 888 346 -45 137.1 Successfully completed per design
CURI-341 695134 9854922 917 360 -60 117.4 Successfully completed per design
CURI-340 695134 9854922 917 360 -45 149.0 Successfully completed per design
Notes:
(1) Geomechanical drill hole for open pit engineering design purposes only; being drilled in addition to the Infill program
(2) All drill holes are surveyed in UTM Datum (Provisional South American 1956, Zone 17)
Date:
News Release:
Ticker Symbols:
May 12, 2021
21-12
ADZN (TSXV), ADVZF (OTCQX), SRL (TSXV) SRLZF (OTCQB)
– 7 of 8 –
Figure 1: Drill Collar Location Map for Drill Holes at El Domo
Date:
News Release:
Ticker Symbols:
May 12, 2021
21-12
ADZN (TSXV), ADVZF (OTCQX), SRL (TSXV) SRLZF (OTCQB)
– 8 of 8 –
Table 2: Drill Collar Information for Regional Exploration Drill Holes at Curipamba Project
Hole ID EAST NORTH ELEV AZIMUTH DIP DEPTH COMMENT
CREG-005 696632 9854780 954 270 -70 N/A Successfully completed; La Vaquera
CREG-004 696772 9855091 994 270 -75 398.0 Successfully completed; La Vaquera
CREG-003 692355 9849275 472 160 -60 429.0 Successfully completed; Sesmo Sur
CREG-002 690855 9848700 528 270 -60 554.3 Successfully completed; El Panecillo
CREG-001 690518 9848536 544 270 -60 457.8 In Progress; El Panecillo
Notes:
(1) All drill holes are surveyed in UTM Datum (Provisional South American 1956, Zone 17)
Figure 2: Drill Collar Location Map for Regional Exploration Drill Holes