Spanish Mountain Gold Receives Positive Particle Ore Sorting Results for the Phoenix Deposit Highlighting Production Upside
Spanish Mountain Gold Receives Positive Particle Ore Sorting Results for the Phoenix
Deposit Highlighting Production Upside
VANCOUVER, British Columbia--(BUSINESS WIRE)--March 2, 2026--Spanish Mountain Gold Ltd. (the
"Company" or "Spanish Mountain Gold") (TSX-V: SPA) (FSE: S3Y) (OTCQB: SPAUF) is pleased to
announce the Phase 1 test results for sensor based particle sorting on the gold mineralization from the Phoenix
deposit. These results, which essentially reject waste and enhance grades to the process plant, were completed as
part of the ongoing trade-off studies as the company prepares to advance its Spanish Mountain Gold (“SMG”)
project towards feasibility. The SMG project is in the Cariboo Gold Corridor, British Columbia, Canada.
Highlights:
X-ray transmission (“XRT”) results based on the samples tested from the Phoenix deposit show an
upgrade potential of two or more times the grade of the sample through a high mass rejection of waste and
lower-grade material in the order of 50% to 70% of the feed mass.
Particle ore sorting resulted 85% to 92% recovery of gold from the samples.
President and CEO, Peter Mah, stated, “The amenability of the Phoenix gold mineralization to XRT ore sorting
is an exciting new opportunity for the project to potentially increase milled grades and expand gold production
during the first decade of production for the proposed mine. Ore sorting phase 1 test results show the potential to
improve the project scale and economics while derisking portions of the resource, especially lower grade feed.
Preconcentrating mineralization essentially moves more gold through the process plant, which could
significantly uplift processed grades, gold production and overall project economics. Follow up test work will
include overall flow sheet recovery targeting the inclusion of results in a PEA update during H1, 2026.”
Phoenix deposit – Particle Ore Sorting
Spanish Mountain Gold commissioned ABH Engineering (“ABH”) Inc. (see October 20, 2025 news release) to
complete a Phase 1 ore sorting study as part of ongoing studies to optimize the run-of-mine (“ROM”) feed
material into the Mill and Process Plant from the PEA (see July 3, 2025 news release). ABH previously
completed amenability tests on the mineralization from the Main deposit that indicated positive results with XRT
ore sorting to increase process plant mill feed grades and gold produced while targeting lower costs and
improved project economics for the SMG project (see January 21, 2025 news release).
The particle ore sorting work on the Phoenix deposit has benefited from the results from an earlier study on the
Main deposit completed with ABH (see January 21, 2025 news release). The current work program will create
multiple products and algorithms to determine the optimal sorting conditions for achieving the highest possible
increase to gold recovered per tonne milled through the mill and processing plant.
There are numerous benefits that stream from particle ore sorting for the SMG project, and it is an important,
potential optimization to the ROM feed grade of the process plant that could result in higher metal production,
lower operating capital per tonne processed, and higher metal recoveries post processing. Particle ore sorting can
also aid in the rejection of barren material that leads to the reduction of fine tailings, reduced materials handling
charges for transportation, reduced process plant and tailings capital expenditures, and ultimately, lower impact
to the local receiving environment through reduced water, reagents and overall infrastructure footprint.
For the Phase 1 testing, a total of 96 individual, 7.5-centimeter pieces of half-core samples designed to be
representative of the Phoenix deposit were collected from drill core stored in the drill core archives at the SMG
project. These samples were analyzed using XRT sorting technology. Testing was conducted at Saskatchewan
Research Council (“SRC”) using Tomra's commercial-scale XRT machine coupled with their enhanced AI
programs, OBTAIN and CONTAIN.
Results from the testing at SRC show that, based on this Phase 1 sample set, the Phoenix deposit material is very
amenable to sorting using XRT sensors. The Phoenix deposit samples, averaging a grade of 0.48 g/t Au, are
shown to have the potential to yield an upgrade of the ROM feed grade by two or more times, while achieving
85% to 92% gold recovery and rejecting 50% to 70% of the sorter feed mass.
Based upon these very positive results, Spanish Mountain Gold initiated the Phase 2 sample collection for the
Phoenix deposit, comprised of two, 100-kilogram (kg) bulk sample sets of quartered drill core, broken into 5.0 to
7.5 cm pieces, representing material less than the cut-off grade of the Phoenix deposit Mineral Resource
Estimate (MRE) of 0.20 g/t gold (see July 3, 2025 news release) and the average grade of the MRE, 0.44 g/t
gold. These two bulk samples from the Phoenix deposit are now running in parallel with a similar particle ore
sorting study on five 100-kg bulk sample sets from the Main deposit at the SRC. The different feed grades of the
two bulk samples from Phoenix deposit allow for modelling the sorter performance with a higher level of
confidence because these larger samples are more representative of the deposit. Results to be announced in
future press releases.
Next Steps
With positive results received from the Phase 1, particle ore sorting work on Phoenix deposit, ABH is
undertaking the modeling and optimization of the preliminary operating points that will inform the analysis of
the Phase 2 work results, the XRT of the two, 100 kg bulk samples.
Qualified Person
Brent Hilscher, P.Eng., Vice President of Mineral Processing with ABH Engineering Inc., is the Independent
Qualified Person as defined under National Instrument 43-101 who has reviewed the technical information in
this news release and has approved the content for dissemination.
Jason Dunning, M.Sc., P.Geo., Head of Exploration (Senior Technical Advisor) with Spanish Mountain Gold, is
the non-Independent Qualified Person as defined under National Instrument 43-101 who has reviewed the
technical information in this news release and has approved the content for dissemination.
Abbreviations: centimetres = cm, grams per tonne = g/t, CRM = certified reference material, gold = Au,
kilograms = kg, mineral resource estimate = MRE, Spanish Mountain Gold = SMG, quality control = QC,
quality assurance and quality control = QAQC, run of mine = ROM, Saskatchewan Research Council = SRC, X-
ray Transmission = XRT
About Spanish Mountain Gold Ltd.
Spanish Mountain Gold Ltd. is focused on advancing its 100%-owned Spanish Mountain Gold Project (Project)
towards its goal to build the next gold mine in the Cariboo Gold Corridor, British Columbia. On August 18,
2025, the Company filed an NI 43-101 Technical Report on SEDAR+ that sets out the Project’s de-risked and
optimized Preliminary Economic Assessment (PEA), with an updated Mineral Resource Estimate (MRE). We
will continue to advance the Project to position the Company to make a construction decision in 2027. We are
striving to be a leader in community and Indigenous relations by leveraging technology and innovation to build
the 'greenest' gold mine in Canada. The Relentless Pursuit for Better Gold means seeking new ways to achieve
optimal financial outcomes that are safer, minimize environmental impact and create meaningful sustainability
for communities. Details on the Company are available on www.sedarplus.ca and on the Company's website:
www.spanishmountaingold.com.
On Behalf of the Board,
“Peter Mah”
President, Chief Executive Officer and Director
Spanish Mountain Gold Ltd.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
FORWARD-LOOKING INFORMATION:
Certain of the statements and information in this press release constitute "forward-looking information". Any
statements or information that express or involve discussions with respect to predictions, expectations, beliefs,
plans, projections, objectives, assumptions or future events or performance (often, but not always, using words
or phrases such as "expects", "anticipates", "believes", "plans", "estimates", "intends", "targets", "goals",
"forecasts", "objectives", "potential" or variations thereof or stating that certain actions, events or results "may",
"could", "would", "might" or "will" be taken, occur or be achieved, or the negative of any of these terms and
similar expressions) are not statements of historical fact and may be considered forward-looking information.
The Company's forward-looking information is based on the assumptions, beliefs, expectations and opinions of
management as of the date of this press release and include but are not limited to statements with respect to, the
potential to increase milled grades and expand gold production during the first decade of production for the
proposed SMG mine; the potential to improve the SMG project scale and economics while derisking portions of
the resource, especially lower grade feed; and the plan to make a construction decision in 2027. Other than as
required by applicable securities laws, the Company does not assume any obligation to update forward-looking
information if circumstances or management's assumptions, beliefs, expectations or opinions should change, or
changes in any other events affecting such statements or information. For the reasons set forth above, investors
should not place undue reliance on forward-looking information.
Contacts
For more information, contact:
Peter Mah
(604) 601-3651