Silver Range Defines a New, Large Un-Drilled Target at Cold Springs Project, Nevada
Suite 1016 – 510 West Hastings Street
Vancouver, B.C. V6B 1L8
Tel: 604-687-2522
www.silverrangeresources.com
TSX-V: SNG
SILVER RANGE DEFINES A NEW, LARGE UN-DRILLED TARGET AT COLD
SPRINGS PROJECT, NEVADA
October 31, 2018 – Silver Range Resources Ltd. (TSX-V:SNG) (“Silver Range”) is pleased to
provide an update on geological mapping, sampling and geophysical surveys recently completed
at its Cold Springs Property in Churchill County, Nevada. This work confirmed that the exposed
high-grade gold & silver mineralization is on the periphery of a larger epithermal system, down-
dropped to the west across a range front fault. Geophysical surveys over this down-faulted block
mapped a vertically persistent bedrock resistivity low beneath alluvial cover . This feature is
interpreted to be an argillic envelope surrounding the basement source of the hydrothermal
system. A video presentation describing this new drill target can be found on Silver Range’s
website and here.
Geological mapping, sampling & drill compilation
In early 2018, Silver Range purchased historical drill data, underground mapping and sample
results collected at Cold Springs from 1981 through 1990 and constructed a drill data base
including all 47 drill holes completed to date on the property. In July, a geological mapping and
sampling program was conducted. A total of 26 rock samples were collected, 2 of which assayed
greater than 5 g/t Au and 11 of which returned greater than 1 g/t Au. A grab sample of quartz
containing grey banding yielded the peak assay of 12.9 g/t Au. Silver assays ranged as high as
687 g/t Ag from a specimen of similar material , with 9 of 26 samples returning assays greater
than 31 g/t Ag.
Cold Springs is underlain by generally west -dipping rhyodacitic crystal through lithic -crystal
tuff, capped by a maroon lithic tuff breccia. This assemblage is exposed on a central hill
bounded to the west by a north -striking normal range front fault , which has dropped the host
assemblage down -dip to the west. Gold mineralization was introduced in two phases of
silicification, both confined to the capping lithic tuff breccia and uppermost lithic -crystal tuff.
The earlier phase of silicification consists of widespread, pervasive, centimeter -scale quartz
veining and s ilica flooding of permeable matrix. This style of mineralization contains sub -
economic gold and silver, averaging 0.113 g/t Au and 2.81 g/t Ag where thoroughly drill tested
in the centre of the property by previous operators. The second phase of minerali zation consists
of cross -cutting, moderately west to southwest dipping, quartz -chalcedony veins. Four major
veins were mapped on the property with exposed strike lengths up to 70 m and widths ranging up
to 2.0 m thick. These veins display classic low sul phidation epithermal textures including
colloform banding, bladed quartz after calcite , brecciation and annealing . Clots of pyrite and
2
bands of black to dark grey silver sulphides and sulphosalts are locally present. Samples of this
latter material collected by Silver Range have assayed up to 20.1 g/t Au and 1,770 g/t Ag. Best
drill results from these veins were reported in an ASARCO drill hole (CS83-03) which returned
3.05 m @ 4.25 g/t Au. This result has not been independently verified by Silver Range.
Geological mapping and analysis of historic al drill hole data strongly suggest that the
source and centre of the epithermal system lies beneath alluvium west of the exposed
mineralization. Drill results beneath the central hill indicate that the gold mineralization does
not extend to depth and there is no evidence of a steeply dipping feeder vein system beneath the
exposed mineralization in any of the deeper drill holes . The westward dip of all of the major
mineralized second phase veins suggests a hydrothermal hydraulic gradient to the west. Finally,
second stage high grade precious metal veins are more common and larger west of the summit of
the central hill. These veins are truncated on the west flank of the hill by the range front fault.
Historical drill data indicates that the covering alluvium is approximately 60 m thick near this
fault and that the top of down -dropped bedrock to the west consists of maroon lithic tuff breccia
carrying anomalous gold. In sum, this evidence indicates that the mineralization exposed on the
hill at Cold Springs is on the eastern periphery of a larger low -sulphidation epithermal system,
down-dropped to the west across the range front fault.
Geophysical surveys
A three -dimensional induced polarization and resistivity (3DIP) survey was conducted in
September over the prospective area west of the range front fault . The survey detected a large
compact resistivity low defined by material less than 30 ohm -m. This fe ature is approximately
200 m west of the range front fault and on strike with the trend of mineralization exposed on the
hill. The depth to the top of this body is 80 m, consistent with estimates of the thickness of
alluvium in the area. The feature pers ists to depth , beyond the depth of investigation of the
survey, conservatively estimated at 200 m. This low resistivity feature is interpreted to be a
zone of argillic alteration surrounding a steeply dipping hydrothermal source region and
represents a priority drill target.
Samples were secured and transported by the field crew to ALS Minerals facilities in Reno,
Nevada for sample preparation. Pulps were shipped to North Vancouver for assaying and
geochemical analyses. Rock sample s were analyzed by Ultra -Trace Aqua Regia ICP -MS (ME-
MS41) and fire assayed for gold (30 g sample) (Au-AA25). Samples that exceeded the detection
limits of the routine methods were assayed for silver and copper by inductively coupled plasma -
atomic emission spectroscopy (Ag/Cu-OG46) and for gold by gravimetric analysis (Au-GRA21).
Technical information in this news release has been approved by Mike Power, M.Sc., P.Geo.,
President and CEO of Silver Range Resources Ltd. and a Qualified Person for the purpose s of
National Instrument 43-101.
Silver Range is a precious metals prospect generator working in Nevada, Nunavut and the
Northwest Territories. Silver Range has a portfolio of 18 active projects in Nevada. In total, the
company has assembled a portfoli o of 42 properties, 12 of which are currently optioned and
being explored by partners. Silver Range is actively seeking joint venture partners to explore the
high grade precious metal targets in its portfolio.
3
Additional information on Silver Range’s pro perties may be found on the company’s website at
www.silverrangeresources.com.
ON BEHALF OF SILVER RANGE RESOURCES LTD.
“Mike Power”
President, C.E.O. & Director
For further information concerning Silver Range or its exploration projects please contact:
Investor Inquiries
Richard Drechsler
Vice-President, Communications
Tel: (604) 687-2522
NA Toll-Free: (888) 688-2522
http://www.silverrangeresources.com
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is
defined in the policies of the TSX Venture Exchange) accepts responsibility for the
adequacy or accuracy of this release.
This news release may contain forward looking statements based on assumptions and judgments
of management regarding future events or results that may prove to be inaccurate as a result of
exploration and other risk factors beyond its control, and actual results may differ materially
from the expected results.