Standard Lithium Makes First Pilot-Scale High Purity Lithium Carbonate and Commissions Crystallisation Pilot Prototype
STANDARD LITHIUM MAKES FIRST PILOT-SCALE HIGH PURITY LITHIUM CARBONATE
AND COMMISSIONS CRYSTALLISATION PILOT PROTOTYPE
12th December 2018 – Vancouver, BC – Standard Lithium Ltd.(“Standard Lithium” or the
“Company”) (TSXV: SLL) (OTC-Nasdaq Intl. Designation: STLHF) (FRA: S5L), is pleased to
announce that the Company has completed the commissioning process for its prototype
crystallisation pilot plant and has produced its first quantity of high purity (>99.1%) lithium
carbonate.
The Company, via its technology partners, is currently designing and fabricating both halves of
its full-scale Pilot Plant; the Lithium Extraction Pilot Plant is being designed and built by Zeton
Inc. in Burlington, Ontario, Canada; the Lithium Carbonate Crystallisation Pilot Plant is being
designed and built by Saltworks Technologies Inc., at their facility in Richmond, British
Columbia, Canada. Both parts of the Pilot Plant are based on Standard Lithium’s proprietary
technology.
The newly-constructed crystallisation pilot prototype was operated using a relatively ‘impure’
feed solution similar to, but less pure than that produced by the Company’s Lithium Extraction
Process (as per ongoing testing at the Company’s mini-pilot plant in Ontario). The feed solution
contained approximately 4,500 mg/L lithium; 5,000 mg/L sodium (at least one order of
magnitude higher than that produced by the Company’s Lithium Extraction Process); over
400 mg/L of other alkali, alkaline earth and transition metal contaminants; and over 900 mg/L of
other non-metallic anionic contaminants. After setting up and completing initial commissioning
work for approximately 2 weeks, the prototype pilot circuit was operated, whilst monitoring
crystallisation progress using high-speed, multi-image photo-microscopy and artificial
intelligence computer image recognition for crystal size and shape. After rudimentary washing
of the resulting crystallised solids, analysis confirmed that the purity of the product exceeded
>99.1% lithium carbonate. The prototype pilot plant is now undergoing routine optimisation to
adjust several key operating parameters. In addition, the number of crystallisation cycles that
have been operated will be increased, and additional product washing technology will be
introduced to enable further process optimisation and improved product purity. The technical
team will also be adjusting the composition of the input feed stream so as to optimise how the
two parts of Standard Lithium’s proprietary technologies work together.
Dr. Andy Robinson, President and COO of Standard Lithium commented, “we have all been
very pleasantly surprised by these highly positive results from our prototype pilot, established so
quickly after starting up the equipment. Standard’s technical team and our partners at
Saltworks are now going through the rigorous process of optimising the operation of the
equipment and adding additional process cycles and washing technology so that we can
improve the purity of the final lithium carbonate product even further. They are also gathering
key data to allow us to commence the design for the larger scale crystallisation pilot plant that
will be deployed to our project site in southern Arkansas, USA.”
The Company also announces that its board of directors has approved the adoption of a new
incentive stock option plan which reserves a maximum option pool of 14,705,515 options. The
new plan will better align with the Company’s compensation objectives and will provide a more
flexible mechanism for incentivizing management, employees and consultants of the Company.
The new plan will be presented to shareholders of the Company for ratification at the upcoming
annual general and special meeting to be held on December 19, 2018. Following ratification,
final adoption of the plan will be subject to the approval of the TSX Venture Exchange.
Following adoption, all exciting incentive stock options of the Company will be governed by the
new plan. Further details regarding the new plan, including a copy of the plan, are set out in the
management information circular of the Company that will be delivered to shareholders in
respect of the annual general and special meeting. A copy of the management information
circular is also available under the Company’s profile on SEDAR.
Quality Assurance
Dr. Ron Molnar, Professional Metallurgical Engineer (Ontario P.E.# 100111288), is a qualified
person as defined by NI 43-101, and has reviewed and approved the scientific and technical
information that forms the basis for this news release. Dr. Molnar is independent of the
Company.
About Standard Lithium Ltd.
The Company’s flagship project is located in southern Arkansas, where it is engaged in the
testing and proving of the commercial viability of lithium extraction from over 150,000 acres of
permitted brine operations utilising the Company’s proprietary selective extraction technology.
The Company is also pursuing the resource development of over 30,000 acres of separate brine
leases located in southwestern Arkansas and approximately 45,000 acres of mineral leases
located in the Mojave Desert in San Bernardino County, California.
Standard Lithium is listed on the TSX Venture Exchange under the trading symbol “SLL”;
quoted on the OTC – Nasdaq International Designation: STLHF; and on the Frankfurt Stock
Exchange under the symbol “S5L”. Please visit the Company’s website at
www.standardlithium.com.
For further information, contact Anthony Alvaro at (604) 240 4793
On behalf of the Board,
Standard Lithium Ltd.
Robert Mintak, CEO & Director
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of
the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This
news release may contain certain “Forward-Looking Statements” within the meaning of the United States
Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When used in
this news release, the words “anticipate”, “believe”, “estimate”, “expect”, “target, “plan”, “forecast”, “may”,
“schedule” and other similar words or expressions identify forward-looking statements or information.
These forward-looking statements or information may relate to future prices of commodities, accuracy of
mineral or resource exploration activity, reserves or resources, regulatory or government requirements or
approvals, the reliability of third party information, continued access to mineral properties or infrastructure,
fluctuations in the market for lithium and its derivatives, changes in exploration costs and government
regulation in Canada and the United States, and other factors or information. Such statements represent
the Company’s current views with respect to future events and are necessarily based upon a number of
assumptions and estimates that, while considered reasonable by the Company, are inherently subject to
significant business, economic, competitive, political and social risks, contingencies and uncertainties.
Many factors, both known and unknown, could cause results, performance or achievements to be
materially different from the results, performance or achievements that are or may be expressed or
implied by such forward-looking statements. The Company does not intend, and does not assume any
obligation, to update these forward-looking statements or information to reflect changes in assumptions or
changes in circumstances or any other events affections such statements and information other than as
required by applicable laws, rules and regulations.