Standard Lithium Makes Better Than 99.9% Battery Quality Lithium Carbonate
STANDARD LITHIUM MAKES BETTER THAN 99.9% BATTERY QUALITY
LITHIUM CARBONATE
March 9 th, 2020 – Vancouver, BC – Standard Lithium Ltd. (“Standard Lithium” or the
“Company”) (TSXV: SLL) (OTCQX: STLHF) (FRA: S5L) an innovative technology and
lithium development company, is pleased to report that it has produced its first >99.9% purity
(also known as ‘three-nines’) battery quality lithium carbonate using the Company’s proprietary
‘SiFT’ crystallisation technology. This optimisation work was performed at the University of
British Columbia (UBC) and was partially funded by a grant of $300,000 awarded to the
Company and UBC by Innovate BC (note to the reader: this lithium carbonate crystallisation
optimisation work is separate from the ongoing commissioning of the Company’s LiSTR Direct
Lithium Extraction demonstration plant in south Arkansas)
The SiFT technology was re-run on solids that had been previously produced (see news release
dated 09 th Jan 2019) , and involved a single additional re-crystallisation step. The resulting
lithium carbonate crystals were analysed at UBC using low-detection-limit ion-chromatography
techniques (similar to those used in the pharmaceutical industry to determine impurities at low
levels). The lithium carbonate samples were analysed for the main suite of cation contaminants
that are typically found in commercially sold products, and the results are provided in the table
below.
Contaminant Lithium Carbonate
Initial Re-crystallised
Sodium 2,270 ppm 60 ppm
Calcium 145 ppm <36 ppm
Magnesium <22 ppm <22 ppm
Potassium <21 ppm <21 ppm
Total Cation
Contaminants
<2,458 ppm
(<0.246 wt.%)
<139 ppm
(<0.014 wt.%)
As seen in the table, the total cation contaminants in the lithium carbonate were reduced from
less than 2,458 ppm (or <0.246 wt.%) to less than 139 ppm (or <0.014 wt.%), resulting in a
purity of >99.9 %. Actual purity may be greater than this figure, but additional analyses will be
required to definitively determine the total impurity profile (i.e. to quantify chloride, sulphate
and boron concentrations at expected very low levels). Additional work is being completed by
UBC, using the grant money, to optimise how the ion-chromatography system can be integrated
into the overall SiFT process to provide real-time analytical data during crystallisation.
Dr. Andy Robinson, President and COO of Standard Lithium commented, “ this ongoing
refinement of our SiFT crystallisation technology is emblematic of Standard Lithium’s drive to
bring lithium chemical processing into the 21 st Century. We continue to improve the technology,
in terms of performance, robustness and scalability. We are also finalising our efforts in terms
of IP protection and the delivery of a full-scale crystallisation pilot plant to our South Arkansas
Project site. The combination of the Company’s SiFT and LiSTR technologies will provide a
new platform for the production of battery quality lithium compounds for current and next
generation lithium-ion batteries.”
Quality Assurance
Dr. Ron Molnar, Professional Metallurgical Engineer (Ontario P.E.# 100111288), is a qualified
person as defined by NI 43-101, and has reviewed and approved the scientific and technical
information that forms the basis for this news release. Dr. Molnar is independent of the
Company.
Grant of Options
The Company also announces that, subject to regulatory approval, it has granted a total of
4,450,000 incentive stock options (“Options”) to certain directors and officers of the Company in
accordance with the Company’s incentive stock option plan, and as compensation for ongoing
services rendered to the Company. The Options vest immediately and are exercisable at a price
of $0.76 for a period of thirty-six months.
About Standard Lithium Ltd.
Standard Lithium (TSXV: SLL) is a specialty chemical company focused on unlocking the value
of existing large-scale US based lithium-brine resources. The Company believes new lithium
production can be brought on stream rapidly by minimizing project risks at selection stage
(resource, political, geographic, regulatory & permitting), and by leveraging advances in lithium
extraction technologies and processes. The Company’s flagship project is located in southern
Arkansas, where it is engaged in the testing and proving of the commercial viability of lithium
extraction from over 150,000 acres of permitted brine operations. The Company is currently
installing a first-of-its-kind Demonstration Plant that will use the Company’s proprietary
technology to selectively extract lithium from LANXESS’ tailbrine. This Demonstration Plant will
be used to prove commercial feasibility. The environmentally friendly process eliminates the
use of evaporation ponds, reduces processing time from months to hours and greatly increases
the effective recovery of lithium.
The Company is also pursuing the resource development of over 30,000 acres of separate brine
leases located in southwestern Arkansas and approximately 45,000 acres of mineral leases
located in the Mojave Desert in San Bernardino County, California.
Standard Lithium is listed on the TSX Venture Exchange under the trading symbol “SLL”;
quoted on the OTC - Nasdaq Intl Designation under the symbol “STLHF”; and on the Frankfurt
Stock Exchange under the symbol “S5L”. Please visit the Company’s website at
www.standardlithium.com.
For further information, contact Anthony Alvaro at (604) 240 4793
On behalf of the Board,
Standard Lithium Ltd.
Robert Mintak, CEO & Director
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of
the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This
news release may contain certain “Forward-Looking Statements” within the meaning of the United States
Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When used in
this news release, the words “anticipate”, “believe”, “estimate”, “expect”, “target, “plan”, “forecast”, “may”,
“schedule” and other similar words or expressions identify forward-looking statements or information.
These forward-looking statements or information may relate to future prices of commodities, accuracy of
mineral or resource exploration activity, reserves or resources, regulatory or government requirements or
approvals, the reliability of third party information, continued access to mineral properties or infrastructure,
fluctuations in the market for lithium and its derivatives, changes in exploration costs and government
regulation in Canada and the United States, and other factors or information. Such statements represent
the Company’s current views with respect to future events and are necessarily based upon a number of
assumptions and estimates that, while considered reasonable by the Company, are inherently subject to
significant business, economic, competitive, political and social risks, contingencies and uncertainties.
Many factors, both known and unknown, could cause results, performance or achievements to be
materially different from the results, performance or achievements that are or may be expressed or
implied by such forward-looking statements. The Company does not intend, and does not assume any
obligation, to update these forward-looking statements or information to reflect changes in assumptions or
changes in circumstances or any other events affections such statements and information other than as
required by applicable laws, rules and regulations.