Sierra Completes Airborne Magnetic Surveys at B&C Springs
Page 1 of 6
For Immediate Release
Sierra Completes Airborne Magnetic Surveys at B&C Springs
Surrey, British Columbia, March 23, 2023, Sierra Grande Minerals Inc. (the “Company” or “ Sierra”)
(CSE: SGRO) (OTCQB: SIERF) (FSE: SRR) (“Sierra” or the “Company”) is pleased to announce that it has
completed drone-based aeromagnetic surveys at its B&C Springs Propert y in Western Nevada, which along
with previously collected soil and rock geochemical data and preliminary geologic mapping, further highlight
the exploration potential.
Figure 1. B&C Springs Magnetic survey data with Cu-in-soil geochemical results and Au grab sample results
The magnetic lineaments and magnetic relief, which commonly correlate with altered and potentially
demagnetized host rocks on structures, also correlate closely with anomalous precious metals values outlined
in the Company’s 2020 geological evaluations, and in its 2021 soil and rock geochemical sampling. The results
of the Company’s present compilation work will be employed in 2023 to focus further geological mapping and
geochemical sampling efforts, and to lay a foundation for ground geophysical surveys (for example, Controlled
Source Audio Magneto -Telluric (CSAMT) and/or induced Polarization (IP) surveys). The aim is that these
Page 2 of 6
surveys will lead to drill -testing of targets which display the most attractive combination of geological,
geochemical, and geophysical features.
The drone-mag surveys at B&CS covered the entirety of the propert y with flight lines spaced 50m apart and
flown on lines perpendicular to known and /or interpreted stratigraphic, structural , mineralized and altered
trends (see Figures 1-2; technical details for the survey are given below). The goal of the survey was to better
outline and target altered and mineralized trends and allow the Company to trace the trends beneath areas that
are partially to completely covered by overburden.
On t he B&CS property there is extensive but generally thin overburden comprising the head of a broad
pediment fan which obscures a large area separating precious metals showings to the west, on Almadex’s Davis
Gold Property, from showings to the east, in the Mildred Mine area, where the Company’s earlier soil sampling
work yielded a number of highly anomalous samples (News release dated August 31, 2021 ; See Figure 1).
During Q1 of 2022, following the Company’s recognition of the potential of the covered area, and after staking
a large number of new claims, a short prospecting program yielded a number of high -grade grab samples,
including those returning 17.35, 30.9 and 150.5 g/t Au (see Image 1). Furthermore, limited outcrop exposed in
drainages lying within the bounds of the pediment area indicates that the overburden there is generally thin and
that the rocks are altered along structures.
Now that the airborne magnetometer work is complete, the Company is con templating next steps. These
include plans for ground-based CSAMT (controlled source audio -magnetic telluric ) and/or IP (Induced
Polarization) geophysical surveys, but not until further mapping, prospecting, and sampling are undertaken.
The purpose of this follow-up work will be to closely define drill targets along trends showing the greatest
potential to host economic mineralization.
The Company’s CEO, Sonny Janda, commented: “The results from ongoing exploration at B&C Springs are
very encouraging. Prospecting of the recently flown area to the west of the pediment and near the Almadex
property have yielded high-grade gold samples associated with magnetic lineaments outlined in our drone-
based magnetometer survey. What is most intriguing is that the sampling was undertaken prior to running the
drone-based survey! I t is clear from the results that these magnetic lineaments continue beneath the thin
overburden cover, and we are very much looking forward to working that area and defining some exciting drill
targets when we return to the field this spring.”
About the B&C Springs Property
The B&C Springs property is located in the southern Paradise Range in west -central Nevada, within the
Fairplay Mining District, which is known mainly for its precious metals potential, but that also hosts a number
of copper deposits and occurrences. The B&C Springs property mirrors the potential of the Fairplay District
in that it has both base (copper-silver-molybdenum) and precious (gold-silver) metals potential. Much of the
focus for previous work at B&C Springs , including a considerable amount of drilling, was on a Mo -Cu-Ag
mineralized zone on the east side of the property. However, farther west, in the Mildred Mine area, numerous
historical prospecting pits, adits and shallow shafts exist, and the soil geochemical response for gold and silver
in that area confirms that there is potential for precious metals mineralization. Still farther west, across the area
of the pediment, the Company’s expanded property holdings abut Almadex Minerals Ltd.’s Paradise Valley
project, which has long seen exploration for precious metals (see Figure 1). The historical work on either side
of the pediment area hints at further potential for precious metals exploration beneath the shallow overburden
of the upper part of the pediment, and that potential was further reinforced by the results of Sierra’s recent
staking-related prospecting program, in which grab samples returned values up to 150.5 g/t gold (see above
and Image 1).
Page 3 of 6
As for the exploration potential for base metals, the Company’s recent soil geoch emical sampling at B&C
Springs property (see News Release dated October 6, 2021) clearly shows that anomalous copper, molybdenum
and silver appears to be closely associated with a west-northwesterly trending porphyry dike swarm that crosses
the northern part of the property. The anomalous zone is extensive, running from beyond the previously drilled
Mo-Cu-Ag mineralized zone at B&C Springs on the east, to beyond the western boundary of the claim group,
a distance of over 4 km. The anomalous values are also of high tenor, with a broad zone, nearly a km in width,
that has many values exceeding 100 ppm copper, and which range up to 1200 ppm copper. Elevated Ag, Mo,
Au, Hg and Sb are also commonly associated with the anomalous copper values, but this latter expr ession is
most evident in a semi-circular “halo” around the northern margins of the greenstone “cap” to the B&C Springs
Mo-Cu-Ag mineralized zone.
For this area and its base metals potential, the Company is also considering plans for mapping and sampling in
advance of potential ground geophysical work to investigate and develop potential drill targets.
Image 1. Quartz vein breccia cementing altered volcanic rocks in a meter-scale zone from the western
part of the B&C Springs property, where grab samples have yielded up to 150.5 g/t gold
Page 4 of 6
Image 2. Slabbed grab sample from locality shown in Image 1, of quartz vein breccia cementing
altered volcanic rocks from the western part of the B&C Springs property.
Page 5 of 6
Figure 2. Nevada Regional Setting with Sierra Projects
Page 6 of 6
Drone-Mag Survey Technical Details
The drone-mag survey at B&C Springs featured 50 metre line spacings along NE -SW azimuths, with a total
surveyed area of 1,298 line kilometres.
(see Image 1.).
Data Deliverables for the surveys included:
➢ Technical Reports
➢ Total Field Magnetics Maps
➢ First Vertical Derivative Map
➢ Analytical Signal Map
➢ Processed, micro-leveled line by line database of the magnetic data
➢ Raw survey data and geodatabase digital files and base station data
➢ 12m and 5m resolution DSM files
Technical data pertaining to this new release was reviewed and approved by Charles J. “Charlie” Greig, MSc.,
P.Geo., a qualified person under National Instrument 43-101.
ON BEHALF OF THE BOARD
Jared Scharf, Director
Neither the Canadian Securities Exchange nor its Regulation Services Provider (as that term is defined in the policies of the Canadian Securities
Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release includes certain statements that constitute “forward-looking information” within the meaning of applicable securities law, including
without limitation, statements that address the timing and content of certain agreements and development. Forward-looking statements address future
events and conditions and are necessarily based upon a number of estimates and assumptions. While such estimates and assumpt ions are considered
reasonable by the management of the Company, they are inherently subject to significant business, economic, competitive and regulatory uncertainties
and risks, including the ability of the Company to raise the funds necessary to fund its projects and, accordingly, may not occur as described herein or
at all. Actual result s may differ materially from those currently anticipated in such statements. Factors that could cause actual results to diff er
materially from those in forward looking statements include Covid-19 restrictions, market prices, exploitation and exploration s uccesses, the timing
and receipt of government and regulatory approvals, and continued availability of capital and financing and general economic, market or business
conditions. Readers are referred to the Company’s filings with the Canadian securities re gulators for information on these and other risk factors,
available at www.sedar.com. Investors are cautioned that forward -looking statements are not guarantees of future performance or events and,
accordingly are cautioned not to put undue reliance on fo rward-looking statements due to the inherent uncertainty of such statements. The forward -
looking statements included in this news release are made as of the date hereof and the Company disclaims any intention or ob ligation to update or
revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as expressly required by applic able
securities legislation.”