Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

SGLD.V ·

Scorpio Gold Reports Measured & Indicated Resource Estimation of 121,700 oz. Contained Gold in the Heaps at the Mineral Ridge Mine

Resource Estimates

TSX-V: SGN

1462 de la Québécoise

Val-d’Or, QC, J9P 5H4

T: 819- 825-7618

www.scorpiogold.com

News Release No. 241

Scorpio Gold Reports Measured & Indicated Resource Estimation of 121,700

oz. Contained Gold in the Heaps at the Mineral Ridge Mine

Vancouver, July 12, 2017 - Scorpio Gold Corporation (“Scorpio Gold” or the “Company”) (TSX-V: SGN)

is pleased to announce the Mineral Ridge Heap Leach resource estimate by Mine Technical Services (MTS)

of Reno, Nevada. The confirmed resource estimate of 7.1 MT at an average gr ade of 0.017 oz./ton or

121,700 contained ounces of gold in the Measured & Indicated category provides the basis for conducting

a feasibility study for milling of the material and additionally confirms reconciliation of tonnage, grade and

contained ounces placed by the Company and its predecessors since operations commenced. Details of the

resource estimate are available in the MTS Resource Report.

The MTS estimates are reasonably similar to expect ations based on historic production and metal

accounting data (130K oz. from 1 st principal accounting versus 123K oz . from resource estimates). Total

tons estimated (7.1 MT) is in line with the 7.2 MT placed on the pad by MRG and its predecessors. The

average grade reported in the resource estimate (0.017 oz./ton Au) is slightly lower than expectations based

on the historic production and metal accounting data although metallic screen assays completed on the bulk

leach pad sample averaged 0.0185 oz./ton Au. This 8.2% difference between the fire assay grade and the

metallic screen grade indicates a coarse gold component and provides an upside potential to the average

grade that, if realized, will increase the potential projec t economics. Metallurgical test work completed by

KCA also indicates that coarse gold should be recovered in a gravity circuit prior to fine grinding. Mineral

Ridge Gold’s plan is to also process future mine production (not currently in Mineral Reserves) through the

mill, thus improving its overall economics through increased recovery of contained gold.

Based on positive results from the resource estimate and metallurgical testing, MTS will be engaged to

conduct a feasibility study for milling of the heap leach material that will provide the basis for determining

the economics of the overall recovery project.

Brian Lock, interim CEO comments, “This positive r esource estimate provides Scorpio Gold with the

necessary information to proceed with a feasibility study for constructing a milling facility at Mineral Ridge.

We look forward to its completion, which should pr ovide the basis for unlocking untapped value through

exploration and development and benefitting our shareholders for many years to come.”

Scorpio Gold Corporation | 2

Mineral Ridge Leach Pad Mineral Resource Statement – June 29, 2017

Resource Category Tons

(kt)

Au

(oz/ton)

Ag

(oz/ton)

Contained Au

(koz)

Contained Ag

(koz)

Measured 2,895 0.017 0.016 48.5 46.4

Indicated 4,220 0.017 0.018 73.2 74.1

Measured & Indicated 7,115 0.017 0.017 121.7 120.4

Inferred 76 0.016 0.027 1.2 2.0

Notes:

1. The effective date of the mineral resource estimates is Jun 29, 2017.

2. Mineral resources are reported at or above a 0.0002 oz/ton Au cut-off grade.

3. Mineral resources are contained within the Mine ral Ridge leach pad facility with the following

assumptions: A long-term gold price of US$1,216/oz; assumed process costs are US$11.0/ton;

metallurgical recovery for gold is 93%.

4. Rounding may result in apparent differences betwee n when summing tons, grade and contained metal

content.

5. Tonnage and grade measurements are in imperial units; grades are reported in oz/ton.

6. The resource estimate was prepared with reference to CIM Definition Standards for Mineral Resources

and Mineral Reserves (2014) and CIM Estimation of Mineral Resources and Mineral Reserves Best

Practice Guidelines (2003).

7. The resource estimate was prepared by qualified persons, Todd Wakefield, MSc, SME, Ian Crundwell,

BSc, PGeo and Mike Drozd, PhD, SME of Mine Technical Services Ltd.

8. Mineral resources that are not mineral reserves do not have demonstrated economic viability.

About Scorpio Gold

Scorpio Gold holds a 70% interest in the Mineral Ridge gold mining operation located in Esmeralda County,

Nevada with joint venture partner Elevon, LLC (30% ). Mineral Ridge is currently in production as a

conventional open pit mining and heap leach operation. The Mineral Ridge property is host to multiple

gold-bearing structures, veins and lenses at exploration, development and production stages. Scorpio Gold

also holds a 100% interest in the advanced explora tion-stage Goldwedge property in Manhattan, Nevada,

with a fully permitted underground mine and 400 ton per day mill facility. The Goldwedge mill facility has

been placed on a care and maintenance basis and can be restarted on short notice.

Scorpio Gold’s Chairman, Peter J. Hawley, PGeo, is a Qualified Person as defined by National Instrument

43-101 and has reviewed and approved the content of this release.

ON BEHALF OF THE BOARD

SCORPIO GOLD CORPORATION

Brian Lock,

Interim CEO

For further information contact:

Chris Zerga, President

Tel: (819) 825-7618

Email: [email protected]

Scorpio Gold Corporation | 3

Investor Relations

Jag Sandhu, JNS Capital Corp.

Tel: 778-218-9638

Email: [email protected]

Website: www.scorpiogold.com

Neither TSX Venture Exchange nor its Regula tion Services Provider (as that term is defined in the policies of the TSX Venture

Exchange) accepts responsibility for the adequacy or accuracy of this release.

The Company relies on litigation protection for forward-looking statements. This news release contains forward-looking statements

that are based on the Company's current expectations and estimat es. Forward-looking statements are frequently characterized by

words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate", "suggest", "indicate" and other similar words

or statements that certain events or conditions "may" or "will" occur, and include, without restriction, any statements regarding the

Company’s completion of a feasibility study for a milling facility for the Mineral Ridge operation. Such forward-looking statements

involve known and unknown risks, uncertainties and other factors that could cause actual events or results to differ materially from

estimated or anticipated events or results implied or expressed in such forward-looking statements, including risks related to open

pit mining and heap leach operations, in cluding unanticipated changes in the mine ral content of materials being mined;

unanticipated changes in recovery rates; changes in project parameters; failure of equipment or processes to operate as anticipated;

the failure of contracted parties to perfo rm; availability of skilled labour and the impact of labour disputes; delays in obtai ning

governmental approvals; the results of expl oration and development programs and the tim ing and cost of such exploration and

development programs; changes in metals prices; the availability of cash flows or financing to meet the Company's ongoing

financial obligations; unanticipated changes in key management personnel; changes in general economic conditions; other risks of

the mining industry; and those risk factors outlined in the Co mpany's Management Discussion and Analysis as filed on SEDAR.

Any forward-looking statement speaks only as of the date on which it is made and, ex cept as may be required by applicable

securities laws, the Company disclaims any intent or obligation to update any forward- looking statement, whether as a result of

new information, future events or results or otherwise. Forward-looking statements are not guarantees of future performance and

accordingly undue reliance should not be put on such statements due to the inherent uncertainty thereof.