Trigon Reports High Copper and Silver Grades IN Four - Hole Fence Showing Continuity of Silver Hill Mineralization IN Morocco

TRIGON REPORTS HIGH COPPER AND SILVER GRADES IN FOUR -

HOLE FENCE SHOWING CONTINUITY OF SILVER HILL

MINERALIZATION IN MOROCCO

TORONTO, April 5, 2021 – Trigon Metals Inc. (TSX-V: TM) (“Trigon” or the “Company”)

announced assay results from hole s S13, S14, S15 and S27. The holes are comprised

of a 150m wide four-hole fence of drilling to test the geometry and extent of the

mineralization at the Silver Hill project in Morocco.

Each of the holes demonstrated strong copper and silver mineralization. The most

significant of the results w as hole S27, a vertical hole drilled at the end of the program.

The hole was prioritized after new insights on the geometry of the system were made with

the completion of the trench reported on February 24, 2021.

Highlights

• Hole S27: 5 metres @ 1.4% copper and 33.6 g/t silver, from 21 metres depth, plus

3 metres @ 0.61% copper and 40 g/t silver.

• Hole S13: (previously reported January 12, 2021) 8 metre @ 1.8% copper and 121

g/t silver from 32.5 metre depth. Assay results included a 0.5 m interval of 14.87%

copper, 1000 g/t silver and 173 ppm cobalt.

• Hole S14: 2 metres @ 1.27% copper and 5 g/t silver, from 63 metre depth.

The fence of drilling shows that while Mineralization in the earlier angled holes was

concentrated adjacent to the contact between the lower sandstone and upper schist ,

however, the vertical hole, drilled entirely in sandstone, is very well mineralized and the

mineralization remains open to the north. This observation appears to corroborate

mineralization recognized in trenches 1.5 km away. Please see Figures 1 – 4 below for

detailed assay results from holes S13, S14, S15 and S27.

Diagram 1: Two-Dimensional Cross Section of Fence Drilling

Drill core was analyzed by AfriLab, an SGS accredited laboratory in Marrakech .Trigon

has completed the drilling of three additional fences, the results of which will be reported

in the coming weeks. The Company is pleased with its progress, as geologists are

attaining a more comprehensive understanding of the nature and size of the

mineralization.

Map 1: Four-Hole Fence in Relation to Other Drill Work at Silver Hill

Jed Richardson, President and CEO of Trigon Metals, said, “These results have

supported our high expectations at Silver Hill which is becoming the exploration focus of

the Company to complement our production path at the Kombat Mine in Namibia.

Trigon’s aim is to take advantage of what we believe to be sustainable higher copper

prices by expediting production at Kombat that will generate cash flow to fund

development of our portfolio of highly prospective high impact copper projects.”

Continuous Sample Data from Fence

Figure 1: Drill No S13

Drill N° From To Ref Cu (%) Ag (g/t)

S13

27 27.5 13002 0.19 2

27.5 28 13003 0.25 2

28 28.5 13004 0.18 2

28.5 29 13005 0.15 2

29 29.5 13006 0.31 4

29.5 30 13007 0.44 4

30 30.5 13008 0.46 4

30.5 31 13009 0.50 8

31 31.5 13010 0.47 8

31.5 32 13011 0.44 16

32 32.5 13013 0.30 4

32.5 33 13014 0.98 44

33 33.5 13015 0.95 56

33.5 34 13016 0.81 32

34 34.5 13017 14.87 1000

34.5 35 13018 2.08 128

35 35.5 13019 0.26 24

35.5 36 13020 0.60 40

36 36.5 13021 0.32 20

36.5 37 13022 0.92 72

37 37.5 13024 0.26 16

37.5 38 13025 0.22 12

38 38.5 13026 0.23 16

38.5 39 13027 1.14 91

39 39.5 13028 2.74 184

39.5 40 13029 1.56 176

40 40.5 13030 0.48 28

40.5 41 13031 0.21 4

41 41.5 13032 0.63 20

41.5 42 13033 0.39 12

42 42.5 13035 0.18 4

42.5 43 13036 0.01 4

43 43.5 13037 0.07 2

43.5 44 13038 0.02 2

44 44.5 13039 0.55 20

44.5 45 13040 0.05 3

45 45.5 13041 0.06 4

45.5 46 13042 0.16 8

46 46.5 13043 0.76 36

46.5 47 13044 0.35 28

47 47.5 13046 0.19 4

47.5 48 13047 0.34 8

48 48.5 13048 0.32 12

48.5 49 13049 0.38 16

49 49.5 13050 0.35 20

49.5 50 13051 0.78 24

50 50.5 13052 0.3 4

50.5 51 13053 0.37 12

51 51.5 13054 0.48 16

51.5 52 13055 0.25 12

52 52.5 13057 0.31 12

52.5 53 13058 0.23 8

53 53.5 13059 0.45 16

53.5 54 13060 0.08 3

54 54.5 13061 0.17 2

54.5 55 13062 0.14 2

55 55.5 13063 0.69 3

55.5 56 13064 1.20 4

56 56.5 13065 0.41 3

56.5 57 13066 0.16 2

57 57.5 13068 0.13 1

57.5 58 13069 0.16 1

58 58.5 13070 0.42 4

58.5 59 13071 0.09 1

59 59.5 13072 0.06 1

59.5 60 13073 0.36 2

60 60.5 13074 0.07 1

60.5 61 13075 0.06 1

61 61.5 13076 0.15 2

61.5 62 13077 0.44 3

62 62.5 13079 0.32 3

62.5 63 13080 0.75 3

63 63.5 13081 1.33 4

63.5 64 13082 0.46 3

64 64.5 13083 0.24 2

64.5 65 13084 0.13 2

65 65.5 13085 0.01 1

65.5 66 13086 0.20 1

Figure 2: Drill No S14

Drill N° From To Ref Cu (%) Ag (g/t)

S14

62.5 63 14002 0.04 4

63 63.5 14003 0.17 3

63.5 64 14004 4.22 10

64 64.5 14005 0.15 4

64.5 65 14007 0.55 4

65 65.5 14008 0.02 3

65.5 66 14009 0.01 3

66 66.5 14010 0.01 4

66.5 67 14012 0.02 2

67 67.5 14013 0.03 2

67.5 68 14014 0.02 2

68 68.5 14015 0.05 2

68.5 69 14017 0.04 4

69 69.5 14018 0.05 2

69.5 70 14019 0.05 2

70 70.5 14020 0.15 3

70.5 71 14022 0.05 2

71 71.5 14023 0.06 2

71.5 72 14024 0.11 3

Figure 3: Drill No S15

Drill N° From To Ref Cu (%) Ag (g/t)

S15

18 19 121002 0.01 1

19 20 121003 0.02 1

20 21 121004 0.03 1

21 22 121005 0.19 1

22 23 121006 0.11 1

23 24 121007 0.16 1

24 25 121008 0.14 1

25 26 121009 0.08 1

26 27 121010 0.13 1

27 28 121011 0.07 1

Figure 4: Drill No S27

Drill N° From To Ref Cu (%) Ag (g/t)

S27

21 22 221025 0.01 1.00

22 23 221026 0.15 1.00

23 24 221027 0.3 12.00

24 25 221028 0.57 12.00

25 26 221029 0.83 12.00

26 27 221030 1.87 56.00

27 28 221031 1.3 80.00

28 29 221032 0.62 8.00

29 30 221033 0.19 4.00

30 31 221034 0.03 4.00

31 32 221036 0.03 4.00

32 33 221037 0.04 4.00

33 34 221038 0.47 20.00

34 35 221039 0.44 32.00

35 36 221040 0.91 68.00

36 37 221041 0.31 4.00

37 38 221042 0.15 4.00

38 39 221043 0.35 4.00

39 40 221044 0.15 4.00

40 41 221045 0.76 4.00