Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

SCLT.V ·

Canyon Copper Enters Consulting Agreement to Study Reopening Underground Ramp at the Past Producing Rio Gold Mine.

Corporate Updates

TSXV: CNC

Suite 408 – 1199 West Pender Street • Vancouver, B.C. • V6E 2R1

TEL (604) 331-9326 • FAX (604) 684-9365

Canyon Copper Enters Consulting Agreement to

Study Reopening Underground Ramp at the Past

Producing Rio Gold Mine.

Vancouver, British Columbia, June 26, 2018 - Canyon Copper Corp. ("Canyon") (TSX-V: CNC) is

pleased to announce that it has entered into a consulting agreement ("Agreement") with High Grade

Mining Consulting Ltd (“High Grade”). The Agreement is to provide consulting services to evaluate the

conditions and costs to reopen the underground workings at the past producing Rio Gold Mine located

near Creighton, Saskatchewan, Canada, five kilometres southwest of the city of Flin Flon, Manitoba.

High Grade is a consulting company based in Saskatoon, Saskatchewan providing Mine Engineering and

Mine Operations management services to the Mining and Mineral industry. The President of High Grade,

Mr. Gary Haywood P.Eng, is a Mining Engineer with over 30 years open pit and underground mining

management experience includes all facets of a mining operation from underground and open pit mining

and resource development contracting experience in Australia and Canada.

High Grade has been contracted to develop a Project Management Plan that will detail the steps required

to establish access to the historic Rio mine workings. It is estimated that 1,500 metres of underground

mine working exist ramping down to 120 metres below surface. The Rio Mine was closed in 1989 and

extensive closure was carried, closing the portal, removing the mill and reclaiming the site.

The scope of work will include data search of development plans and closure reports, site visit, report on

permitting, ventilation, ground support, dewatering, health and safety including mine rescue, supervision,

and regulatory reporting. In addition, High Grade will develop an initial cost estimate for establishing

access to the closed Rio Mine workings.

Stephen Wallace, President and CEO, commented, “Re-opening the underground working will provide

Canyon with a wealth of information in three dimensions, an opportunity for detailed sampling, geological

and structural mapping directly in the deposit, along with future potential of underground drilling. This is a

major step in understanding the deposit following up on the winter 2018 drill program. In addition, this

work will fill the data gap left as little underground work by Vista Mines can be located in the

Saskatchewan government archives.”

Plan of estimated location of underground working at the past producing Rio Gold Mine

Bootleg Mine / Rio Deposit

The Rio Zone was first staked in 1931 by P Maloney and A.J. Henning. They completed trenching and a

small shaft with small amounts of ore shipped until the 1940’s. During the 1960’s and 1970’s diamond

drilling and ground geophysics programs were carried, leading to mine development,

In fall 1982 Flin Flon Mines Ltd. undertook underground development on the Rio (Bootleg) deposit

consisting of a ramp decline to a depth of 350 ft. (106.7m). Flin Flon Mines purchased a 300 ton per day

mill and planned on using mined material from the Rio and Henning Maloney deposits, with subsequent

mined material from the Newcor deposit.

Start-up was postponed until early 1984 due to technical problems but opened by mid-1984. The mine

closed just three months after start up after experiencing lower than forecast recovery rates. The mine

went into receivership, and Vista Mines Inc. (“Vista”) gained possession of the property soon after.

In 1986 through 1988 Vista carried out a three-phase exploration program, including surface sampling,

geophysics, surface and underground drilling. A decline was started in July 1987 to enable Vista to

explore the lower mine levels and to allow further drilling to update the reserves.

Early in 1988, Vista reported encouraging test mill results from a 20,000 ton bulk sample that w as taken

from various levels down to the 400 ft (121.9m) level. T he grade of the sample is reported to have

averaged 0.12 oz/ton gold (4.11 g/t), which was too low to warrant production at that time.

Data source for Bootleg Mine/ Rio deposit, Henning-Maloney Deposit and Newcor deposit is the

“ASSESSMENT REPORT ON THE 2014 DIAMOND DRILLING PROGRAM, CREIGHTON PROPERTY

DOUGLAS, BOOTLEG, PHANTOM AND WEKACH LAKE AREAS LARONGE MINING DISTRICT

CREIGHTON, SASKATCHEWAN, by NEW MOON MINERALS CORPORATION by Anthony Spooner, P.

Geo., Flin Flon, MB, August 31, 2016.”

2018 Drilling Program at Rio Mine

Canyon completed a three drill hole program at past producing Rio Mine in March 2018 which targeted

below the historical workings. Drill hole BL-01 intersected two mineralized zone below the workings, Zone

1 with 5.24 g/t gold over 4.0 metres including 12.24 g/t Au over 0.50 metre and a second zone with 2.09

g/t gold over 19.0 metres including 3.23 g/t Au over 8.0 metres. Drill Hole BL-02 drilled from the same site

at a steeper angle than BL-01 intersected 4 mineralized zones below the historical workings ranging in

length from 2.0 to 5.0 metres.

Stephen Wallace, President and CEO, stated, “The results in drill holes BL-01 and BL-02 demonstrate

that the gold mineralization extends below past historical workings. At present Canyon cannot drill closer

to the historical working due concerns of intersecting these underground voids. The re-opening will allow

accurate underground surveying which will permit the company to drill closer to the underground

workings.”

Qualified Person

Stephen Wallace PGeo is the Company's designated Qualified Person within the meaning of National

Instrument 43-101 and has reviewed and approved the technical information contained in this news

release.

On behalf of the Board of Directors,

“Stephen Wallace”

CANYON COPPER CORP.

Stephen Wallace, President, CEO and Director

Contact: Canyon Copper Corp.

Investor Relations

(604) 331-9326

[email protected]

Cautionary Statement Regarding Forward Looking Information

This News Release may contain, in addition to historical information, forward -looking statements within the meaning of Section 27A of the

Securities Act of 1933, as amended, and section 21E of the Securities Exchange Act of 1934, as amended. These forward-looking statements are

identified by their use of terms and phases such as “believe,” “expect,” “plan,” “anticipate” and similar expressions identif ying forward -looking

statements. Investors should not rely on forward-looking statements because they are subject to a variety of risks, uncertainties and other factors

that could cause actual results to differ materially from Canyon's expectations, and expressly does not undertake any duty to update forward-

looking statements. These factors include, but are not limited to the following, Canyon's ability to implement its proposed drill programs on the

Bootleg Project, Canyon’s ability to obtain additional financing, uncertainty of estimates of mineralized material and other factors which may

cause the actual results, performance or achievements of Canyon to be materially different from any future results, performan ce or achievements

expressed or implied by such forward-looking statements.

Cautionary Note to U.S. Investors Regarding Estimates of Measured, Indicated and Inferred Resources

This News Release may use the terms “measured”, “indicated” and “inferred” “resources.” We advise U.S. investors that while these terms are

recognized and required by Canadian regulations, the SEC does not recognize them. “Inferred resources” have a great amount of uncertainty as

to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any p art of an “inferred mineral

resource” will ever be upgraded to a higher category. Under Canadian rules, estates of “inferred mineral resources” may not form the basis of a

feasibility study or prefeasibility studies, except in rare cases. The SEC normally only permits issue rs to report mineralization that does not

constitute “reserves” as in-place tonnage and grade, without reference to unit measures. U.S. investors are cautioned not to assume that any

part or all of a measured, indicated or inferred resource exists or is economically or legally mineable.

NEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE

POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF

THIS RELEASE.