Silver Sands Expands Mineralization Footprint at Virginia Project
Suite 830 – 1100 Melville Street, Vancouver, B.C. Canada, V6E 4A6
Tel: +1 604 786-7774 E-mail: [email protected]
www.silversandscorp.com
www.mirasolresources.com
Silver Sands Expands Mineralization Footprint at Virginia Project
VANCOUVER, BC, February 23, 2021 — Silver Sands Resources Corp. (“Silver Sands” or the
“Company”) (CSE: SAND) (OTCQB: SSRSF) is pleased to announce the remaining results from the
Phase I Drilling Program completed in December 2020. The drilling program exceeded management’s
expectations as it has extended known mineralization along strike at Julia South, Martina SE and Ely
Central; added new zones of mineralization along known vein structures and identified new zones of
mineralization within previously untested veins. The results from Phase I drilling support management’s
belief that the global silver resource of the Virginia vein field can be increased significantly.
Highlights include:
• Extension of known mineralization at Julia South
o Julia South – 124.43 g/t silver over 8.5m, including 168.34 g/t silver of 3.9m
• Extension of known mineralization at Ely Central
o Ely Central – 50.14 g/t silver over 3.00m
• New zones of mineralization along strike
o Martina SE - 70.8 g/t silver over 13.05m, including 149.54 g/t silver over 3.13m and
596.54 g/t silver over 0.3m
• New zones of mineralization in previously untested veins
o Julia South Extension – 140.27 g/t silver over 4.2m, including 483 g/t silver over 0.35m
• 7 of the 18 drill holes intersected zones in excess of 100 g/t silver, with a further 5 returning
values of 30 g/t to 100 g/t silver, that’s 12 of 18 holes in total;
• Shallow high-grade silver mineralization identified in 6 new zones
As previously reported, surface mapping and sampling, IP, trenching and previous drilling in the southern
and eastern parts of the project are all suggesting that the vein systems on the south and east part of the
project are at higher levels in the local volcanic system which require deeper drilling to test the
mineralized zones. Our geologists are adjusting the locat ion and angle of the Phase II drill holes
accordingly.
“The 2020 drilling campaign exceeded our expectations and supports our firm belie f in the project,”
commented Silver Sands CEO Keith Anderson. “The goal of our exploration campaigns remains building
and significantly increasing the global silver resource at Virginia leading to an updated resource estimate
in H2 2021. The IP, trenching and drilling is therefore focussed on strike extensions, new mineralization
along known veins and mineralization in new veins, not redrilling previously known mineralization,” he
continued. “The current fully funded Phase II program is well underway with 1507 metres in 10 holes
completed as of February 19. Samples from some of the first holes have been dispatched to the assay
lab,” he concluded.
Suite 830 – 1100 Melville Street, Vancouver, B.C. Canada, V6E 4A6
Tel: +1 604 786-7774 E-mail: [email protected]
www.silversandscorp.com
www.mirasolresources.com
Summary
A total of 2,831 metres was completed in 18 holes during Phase I, testing and confirming the presence
of new well-mineralized structures not captured in the initial NI 43-101 resource, clearly demonstrating
the potential to significantly grow the existing silver resource.
Figure 1: Plan map with the Phase I drill hole locations and conceptual pit shells related to the current
resource
The drilling has indicated structure is going to be key going forward, as expected in epithermal vein
fields. Down dropped blocks and post mineralization displacement (faulting) appear to be playing an
important role, with new structural interpretations incorporated into the current Phase II program
targeting. In Julia South for example, drilling intersected the upper levels of the system as defined by
low temperature silica species and lower silver values, suggesting the Julia South block is down-dropped
relative to Julia Central and North, and high-grade mineralized shoots similar to Julia Central and North
may exist at depth.
Additionally, several holes intercepted hematite matrix breccia containing silica clasts; these breccias,
typically occurring at higher levels in the mineralized system, commonly contain mineralized clasts from
deeper parts of the system, suggesting mineralized shoots may be intersected deeper, again suggesting
faulting has dropped the mineralized portion of the vein deeper. Again, this new structural interpretation
is incorporated into the current Phase II program targeting.
Suite 830 – 1100 Melville Street, Vancouver, B.C. Canada, V6E 4A6
Tel: +1 604 786-7774 E-mail: [email protected]
www.silversandscorp.com
www.mirasolresources.com
As previously disclosed, surface mapping and sampling, IP, trenching and previous drilling in the
southern and eastern parts of the project are all suggesting these areas represent higher levels in the local
volcanic stratigraphy and epithermal column, deeper drilling to tes t the targets for preserved and
mineralized zones.
Drill Results Review
• Julia South Target: JS-DDH-001
The Julia South hole JS-DDH-001 was collared 100m south of the previous drill holes incorporated in
the conceptual pit resource and intersected a 8.5m thick brecciated structure grading 123.43 g/t Ag,
including 3.90m at 168.34 g/t Ag. Colloform to crustiform banded crypto crystalline vein fragments
with sulfides returned a peak result of 271 g/t Ag over 0.33m. This intercept is hosted in low temperature
late cross-cutting chalcedonic silica with a latter and final manganese oxide (MnOx) rich pulse. Minor
hydrothermal breccia structures with Ag anomalies exist throughout the hole. It is interpreted that this
hole sits within a downthrown structural block that is less eroded than the area to the north, which hosts
a significant part of the Virginia Ag resource. Phase II drilling will test beneath this intercept to confirm
this concept.
Figure 2: Cross Section looking north on IP chargeability PDP geophysics
• Julia South Target: JS-DDH-002
The Julia South hole JS-DDH-002 intersected hydrothermal polymictic breccia with quartz vein
fragments in hematite silica matrix. The existence of quartz vein fragments suggests that a potential target
may exist at depth below the silica-hematite matrix breccia.
• Julia SE Target: JSE-DDH-001
The Julia SE hole JSE-DDH-001 intersected a strongly oxidized hydrothermal polymictic breccia with
wall rock and vein fragments, grading 140.27 g/t Ag over 4.20m at 70m downhole. Quartz vein
fragments display colloform banding and also fine crystalline quartz textures. Some of the fragments
show low temperature silica species with breccias and veinlets cutting the structure hosting a peak sample
of 483 g/t Ag over 0.35m. The presence of banded vein fragments mixed with polymictic wall rock
breccia suggests that these mineralized fragments have been sourced from deeper in the structure, which
requires deeper drilling.
Figure 3: Cross Section looking north on IP chargeability PDP geophysics
Suite 830 – 1100 Melville Street, Vancouver, B.C. Canada, V6E 4A6
Tel: +1 604 786-7774 E-mail: [email protected]
www.silversandscorp.com
www.mirasolresources.com
• Martina SE Target: MSE-DDH-002
The Martina SE hole MSE-DDH-002 intercepted 4m at 48.62 g/t Ag and 2.45m at 65.7 g/t Ag
including 0.85m at 111.03 g/t Ag, which was hosted in a zone of strong brecciation (fault breccia?)
crosscut by channels of hydrothermal polymictic breccias and massive cryptocrystalline quartz veinlets,
returning a highlight value of 135 g/t Ag over 0.55m.
Figure 4: Cross Section looking North on IP chargeability PDP geophysics
• Martina SE Target: MSE-DDH-003
The Martina SE hole MSE-DDH-003 hosts a 1m weakly banded sulfide rich (galena) vein, with micro
crystalline quartz and MnOx cavity infilling discrete fractures with a highlight value of 596.54 g/t Ag
over 0.3m. This banded vein with hematite/limonite seams hosts values of 16.05m at 63.97 g/t Ag
including 0.9m at 352.32 g/t Ag.
Figure 5: Cross Section looking north on IP chargeability PDP geophysics
Suite 830 – 1100 Melville Street, Vancouver, B.C. Canada, V6E 4A6
Tel: +1 604 786-7774 E-mail: [email protected]
www.silversandscorp.com
www.mirasolresources.com
• Ely Central Target: EC-DDH-002
The Ely Central hole EC-DDH-002 intercepted hydrothermal breccia with wall rock fragments returning
up to 60 g/t Ag and outward halos of crackle hydrothermal breccias with silica hematite cement with up
to 30 g/t Ag. As mentioned above, these hematite cemented breccias are generally believed to be high up
in the vein system or represent weaker mineralized sections of the hosting structure between the
mineralized shoots. A lower grade, anomalous intersect of 3.00m at 50.14 g/t Ag was returned from this
hole.
Figure 6: Cross Section looking north on IP chargeability PDP geophysics
• Martina SW Target: MSW-DDH-001
The Martina SW hole MSW-DDH-001 intercepted hydrothermal polymictic breccia with quartz vein
fragments in hematite silica matrix (fault zone?). The structure hosts stockworks and crackle brecciation,
with a low grade, but anomalous intersect of 1.10m at 33.61 g/t Ag.
Suite 830 – 1100 Melville Street, Vancouver, B.C. Canada, V6E 4A6
Tel: +1 604 786-7774 E-mail: [email protected]
www.silversandscorp.com
www.mirasolresources.com
Table 1: Virginia Final Phase I Significant Intercepts
Hole ID From To Interval (m)1 Ag g/t2 Ag x Interval3 Cut-off4
JS-DDH-001 71.10 79.60 8.50 123.43 1049 30 g/t
Including 71.10 79.00 7.90 130.41 1030 63 g/t
Including 75.10 79.00 3.90 168.34 657 150 g/t
MSE-DDH-003 39.00 41.00 2.00 40.43 81 30 g/t
48.95 65.00 16.05 63.97 1027 30 g/t
Including 49.57 54.41 4.84 119.03 576 63 g/t
Including 49.87 50.77 0.90 352.32 317 150 g/t
62.90 65.00 2.10 37.39 79 30 g/t
68.35 70.23 1.88 45.31 85 30 g/t
Including 69.93 70.23 0.30 85.88 26 63 g/t
78.10 79.74 1.64 35.67 58 30 g/t
97.30 103.00 5.70 36.66 209 30 g/t
105.70 107.20 1.50 33.69 51 30 g/t
JSE-DDH-001 67.00 68.00 1.00 98.82 99 63 g/t
71.35 75.55 4.20 140.27 589 63 g/t
Including 72.35 72.65 0.30 212.53 64 150 g/t
and 73.65 74.35 0.70 377.45 264 150 g/t
MSE-DDH-002 103.80 104.40 0.60 64.69 39 30 g/t
Including 103.80 104.10 0.30 79.74 24 63 g/t
118.35 121.00 2.65 60.10 159 30 g/t
Including 119.15 120.00 0.85 82.65 70 63 g/t
128.00 130.45 2.45 65.73 161 30 g/t
Including 128.50 129.35 0.85 111.03 94 63 g/t
134.00 138.00 4.00 48.62 194 30 g/t
141.00 142.40 1.40 36.39 51 30 g/t
144.50 145.50 1.00 30.44 30 30 g/t
146.45 147.40 0.95 37.78 36 30 g/t
EC-DDH-002 74.00 77.00 3.00 50.14 150 30 g/t
JS-DDH-002 60.05 61.00 0.95 64.44 61 30 g/t
90.00 92.20 2.20 50.12 110 30 g/t
Including 91.20 91.50 0.30 68.59 21 63 g/t
MSW-DDH-001 103.45 104.10 0.65 33.49 22 30 g/t
107.00 108.10 1.10 33.61 37 30 g/t
JC-DDH-001 no interval to report 30 g/t
JC-DDH-002 no interval to report 30 g/t
MaJo-DDH-001 no interval to report 30 g/t
MG-DDH-002 no interval to report 30 g/t
NE-DDH-002 no interval to report 30 g/t
Suite 830 – 1100 Melville Street, Vancouver, B.C. Canada, V6E 4A6
Tel: +1 604 786-7774 E-mail: [email protected]
www.silversandscorp.com
www.mirasolresources.com
Notes: 1 Reported interval length are down hole widths and not true widths. 2 Reported intervals are at the stated a cut-off grade of 30 g/t Ag (with a minimum width of 0.5m), 63 g/t Ag and
150 g/t Ag. Reported intervals may include up to a maximum of 1m individual section below cut-off grade. 3 Ag Gram Meter interval is calculated using: Ag (g/t) x down hole intersection length (m). 4 The higher-grade intervals were selected using the 63 g/t cut-off grade used in the NI 43-101 resource estimate.
Table 2: Virginia Final Phase I Collar Location
Hole Id Easting Northing Elevation (m) Azimuth Dip Depth (m)
EC-DDH-001 2428800 4739907 1006.8 100 -45 124
EC-DDH-002 2428828 4739515 990.1 280 -45 184
JC-DDH-001 2428103 4739354 1033.8 258 -45 196
JC-DDH-002 2427901 4739394 1043.6 270 -45 133
JS-DDH-001 2428512 4738196 969.7 270 -45 117
JS-DDH-002 2428506 4738123 961.3 270 -45 130
JSE-DDH-001 2428512 4738010 938.3 270 -45 142
MaJo-DDH-001 2431136 4741324 919.8 250 -45 230
MG-DDH-001 2430978 4739873 926 49 -52 302
MG-DDH-002 2431298 4739764 928.6 49 -45 120
MR-DDH-001 2428812 4738612 968.7 55 -45 90
MSE-DDH-001 2429912 4739566 973.1 65 -45 134
MSE-DDH-002 2430006 4739469 966 65 -45 180
MSE-DDH-003 2429907 4739649 972.8 65 -45 178
MSW-DDH-001 2429918 4739110 945.2 100 -45 175
NE-DDH-001 2427149 4740599 1041.9 90 -45 127
NE-DDH-002 2427094 4740598 1036.9 90 -45 160
RO-DDH-001 2428505 4739521 1007 240 -45 126
About Silver Sands Resources Corp.
Silver Sands is a well-financed, Canada-based company engaged in the business of mineral exploration
and the acquisition of mineral property assets in mining-friendly jurisdictions. Its objective is to locate
and develop economic precious and base metal properties of merit. Its key asset is the Virginia silver
project, located in the mining-friendly Santa Cruz state of Argentina.
On Behalf of the Board of Directors
Keith Anderson
Chief Executive Officer, Director
For further information, please contact:
Keith Anderson
Chief Executive Officer, Director (604) 786-7774
Suite 830 – 1100 Melville Street, Vancouver, B.C. Canada, V6E 4A6
Tel: +1 604 786-7774 E-mail: [email protected]
www.silversandscorp.com
www.mirasolresources.com
Qualified Person Statement: Silver Sand’s disclosure of technical and scientific information in this press
release has been reviewed and approved by R. Tim Henneberry, P.Eng., a director of the Company, who
serves as a Qualified Person under the definition of National Instrument 43-101.
QAQC: Silver Sands applies industry standard exploration sampling methodologies and techniques. All
geochemical rock and drill samples are collected under the supervision of the company’s geologists in
accordance with industry practice. Geochemical assays are obtained and reported under a quality
assurance and quality control (QA/QC) program. Samples are dispatched to an ISO 9001:2008 accredited
laboratory in Argentina for analysis. Assay results from channel, trench, and drill core samples may be
higher, lower or similar to results obtained from surface samples due to surficial oxidation and
enrichment processes or due to natural geological grade variations in the primary mineralization.
Forward Looking Statements: The information in this news release contains forward looking statements
that are subject to a number of known and unknown risks, uncertainties and other factors that may cause
actual results to differ materially from those anticipated in our forward-looking statements. Factors that
could cause such differences include: changes in world commodity markets, equity markets, costs and
supply of materials relevant to the mining industry, change in government and changes to regulations
affecting the mining industry and to policies linked to pandemics, social and environmental related
matters. Forward-looking statements in this release include statements regarding future exploration
programs, operation plans, geological interpretations, mineral tenure issues and mineral recovery
processes. Although we believe the expectations reflected in our forward -looking statements are
reasonable, results may vary, and we cannot guarantee future results, levels of activity, performance or
achievements. Silver Sands disclaims any obligations to update or revise any forward-looking statements
whether as a result of new information, future events or otherwise, except as may be required by
applicable law.
Neither the Canadian Securities Exchange (“CSE”) nor its Regulation Services Provider (as that term is
defined in the policies of the CSE) accepts responsibility for the adequacy or accuracy of this release.