SAE.V · 2026-01-22 12:00:00

Sable Samples up to 4.38% Cu, 140 g/t Au, and 584 g/t Ag in Preliminary Sampling Program at the Zorro Project, San Juan, Argentina

Drill Results Exploration Programs Sampling & Geoscience Results

SABLE RESOURCES LTD.

900 – 999 West Hastings Street

Vancouver, British Columbia

V6C 2W2 Canada

TSXV | SAE OTCQB | SBLRF

Sable Samples up to 4.38% Cu, 140 g/t Au, and 584 g/t Ag in

Preliminary Sampling Program at the Zorro Project, San Juan, Argentina

VANCOUVER, CANADA – January 22, 2025 - Sable Resources Ltd. ("Sable" or the "Company")

(TSXV:SAE | OTCQB:SBLRF) is pleased to announce that it has received results for 55 out of a total

of 98 rock samples collected during a preliminary review of its recently acquired Zorro Project in

San Juan, Argentina (see Sable’s news release dated January 15, 2026).

This initial review was focused on some of the historic artisanal mining occurrences located around

the 7km by 4km Zorro magnetic anomaly. Sample results returned highly encouraging values of Cu,

Ag and Au (with associated Pb, and Zn), within three distinct areas of the property . Notably,

however, most of the Zorro property remains completely unexplored.

Of the 55 sample results received, 19 samples returned values higher than 0.1% Cu with maximum

values of 4.38% Cu; 19 samples returned values greater than 1 g/t Au with maximum values of 140.5

g/t Au; 19 samples returned values greater than 10 g/t Ag reaching maximum values of 584 g/t Ag.

In addition, 18 samples returned values over 0.1% Pb.

Figure 1. Values of Cu (left) and Au (right) showing the location of the three current target zones.

The observed mineralization styles, and apparent geochemical/alteration associations and zoning

define three separate, aerially significant target areas (Figure 1):

-2-

Zorro Copper

The Zorro Copper target area is well defined with in a zone of approximately 650m by 500 m.

Sampling returned multiple values grading >0.1% Cu, and up to 4.38% Cu (Figure 2 and Table 1).

Observed m ineralization consists of sheeted quartz -carbonate veins and veinlets containing

chalcopyrite, hematite and magnetite, hosted within Permian granite (Figure 3). In addition to Cu,

sampling returned significant Ag values , up to 114 g/t Ag. Silver appears broadly correlative with

Cu, with 73% of the Zorro Copper samples returning greater than 5 g/t Ag. Furthermore, and

importantly, Au values , although less consistent , ranged from <0.1 g/t up to 15.3 g/t Au , with six

samples returning > 0.1g/t Au (Figure 2 and Table 1) . Typical of Intrusion- Related mineralization,

Bi, Te, and W are anomalous, and in this case, generally correlative with Au values. Sable’s next steps

will include detailed mapping and sampling of this large-scale, outcropping Cu (Ag, Au) system.

Figure 2. Detail of the Zorro Cu zone showing Cu values in percentage for samples received.

Zorro Veins

Located northeast of the Zorro C opper zone, the Zorro Veins zone comprises a series of quartz -

carbonate-pyrite veins that have been historically exploited in artisanal mine working s. Sable’s

sampling program returned high-grade values up to 140 g/t Au and 584 g/t Ag, including 7 samples

that returned >5g/t Au (Figure 1 , Table 1 ). The sulphide mineralogy of the veins includes galena

(one sample reported >20% Pb) , sphalerite, local chalcopyrite and arsenopyrite. Sable’s geology

team considers the vein system to be of intermediate-sulphidation epithermal nature. Sable will

-3-

conduct detailed mapping and further sampling of the veins to define their distribution, continuity,

grade, and depth potential, as well as to ascertain their significance as geochemical vector s to non-

outcropping mineralization in the vicinity.

Figure 3. A and B: Examples of chalcopyrite-rich quartz-carbonate veins from the Zorro Cu target.

Note the particularly coarse-grained chalcopyrite crystals. C: Sheeted veining and local stockwork

characteristic of structural corridors at Zorro Cu. The host granite is intensely altered with Fe-

Carbonate within the veining zones.

Zorro Bx

The Zorro Bx zone outcrops 900 metres east of the Zorro Copper target. It represents a high- level

magmatic-hydrothermal breccia, containing clasts of sedimentary country rock with quartz-sericite-

pyrite cement. S amples collected from the breccia returned well defined epithermal pathfinder

element anomalies, including for As, Ba, Mn, Sb, with lesser anomalies for Mo, and Pb. Additional

geological and alteration mapping, sampling and geophysical surveys will be used to study the Zorro

Bx zone, and to determine its possible transition to Cu and/or Au-Ag mineralization at depth.

Dr. Ruben Padilla, President and CEO of Sable, commented, “We are highly encouraged by this set of

initial results. The widespread nature and variability of mineralization and alteration observed at

the Zorro Project speaks to its potential to host bulk-tonnage Cu (Ag, Au) deposits (e.g. Zorro Copper)

and high-grade Au-Ag (Pb, Zn) deposits (e.g. Zorro Veins). In addition, geochemical and alteration

anomalies such as at Zorro Bx can occur peripheral to or above significant porphyry -style Cu or

epithermal Au-Ag occurrences. The Zorro Copper zone provides us with a clear fast-track diamond

drill target, given the size and strong Cu- Ag-rich signature of outcropping mineralization. Sable’s

geology team is advancing detailed surface work at all the above outlined targets, in parallel with

widespread prospecting in other areas of this under -explored property. Our work will be greatly

facilitated by the ease of access and all- weather altitude (2,600masl) of the project area, which will

allow us to advance exploration year round.”

-4-

Table 1. Location and results for highlighted samples with values greater than 0.1% Cu, 0.1 g/t Au,

5 g/t Ag, and 0.1% Pb and Zn.

Sample Grid North East Elevation Site Cu % Au (g/t) Ag (g/t) Pb % Zn %

E43077 WGS 84 / UTM zone 19S 6626602 453836 2790 Outcrop 4.38 0.128 16.7 0.0124 0.0048

E43011 WGS 84 / UTM zone 19S 6626828 453982 2747 Dump 2.94 3.24 74.4 0.017 0.0036

E43034 WGS 84 / UTM zone 19S 6626903 453807 2774 Outcrop 2.46 0.404 18 0.0284 0.0023

E43030 WGS 84 / UTM zone 19S 6627115 453875 2748 Outcrop 2.29 0.112 7.02 0.00725 0.0018

E43035 WGS 84 / UTM zone 19S 6627249 454010 2740 Outcrop 1.44 1.045 8.13 0.00075 0.003

E43010 WGS 84 / UTM zone 19S 6626827 453974 2746 Dump 0.742 2.35 4.8 0.00424 0.0028

E43012 WGS 84 / UTM zone 19S 6626771 453943 2758 Outcrop 0.67 0.058 2.91 0.011 0.0023

E43009 WGS 84 / UTM zone 19S 6627792 454314 2690 Float 0.538 1.02 24.2 0.1405 0.0069

E43031 WGS 84 / UTM zone 19S 6627052 453823 2759 Outcrop 0.535 0.017 7.99 0.00296 0.0033

E43044 WGS 84 / UTM zone 19S 6627162 453518 2784 Float 0.487 0.013 10.4 0.00129 0.0109

E43032 WGS 84 / UTM zone 19S 6626843 453617 2806 Outcrop 0.381 0.02 11.15 0.0019 0.0022

E43014 WGS 84 / UTM zone 19S 6626703 453676 2792 Outcrop 0.306 0.027 7.19 0.00964 0.0008

E43041 WGS 84 / UTM zone 19S 6627171 453586 2781 Outcrop 0.208 0.014 5.48 0.0006 0.0055

E43036 WGS 84 / UTM zone 19S 6626872 453601 2807 Outcrop 0.1965 0.007 2.53 0.00056 0.0034

E43079 WGS 84 / UTM zone 19S 6625671 452290 3107 Dump 0.1725 1.105 238 17.35 0.151

E43029 WGS 84 / UTM zone 19S 6627122 453917 2738 Outcrop 0.1535 0.006 1.83 0.00089 0.0025

E43043 WGS 84 / UTM zone 19S 6627702 453731 2760 Outcrop 0.1515 0.014 1.88 0.00079 0.0037

E43024 WGS 84 / UTM zone 19S 6627599 454844 2665 Dump 0.148 2.73 139 10 1.565

E43021 WGS 84 / UTM zone 19S 6627198 454080 2711 Outcrop 0.11 15.3 117 0.565 0.196

E43003 WGS 84 / UTM zone 19S 6627890 455209 2708 Dump 0.0947 34.7 25.1 2.84 0.426

E43037 WGS 84 / UTM zone 19S 6626612 453338 2848 Outcrop 0.0918 0.007 0.41 0.00036 0.0027

E43006 WGS 84 / UTM zone 19S 6627775 454615 2714 Outcrop 0.0797 1.4 584 20 0.923

E43005 WGS 84 / UTM zone 19S 6627671 454578 2684 Dump 0.0757 3.01 35.8 0.0849 0.0078

E43008 WGS 84 / UTM zone 19S 6627875 454415 2693 Dump 0.0682 6.32 7.61 0.0763 0.0345

E43002 WGS 84 / UTM zone 19S 6627618 455240 2670 Outcrop 0.0617 5.83 123 2.89 0.367

E43078 WGS 84 / UTM zone 19S 6626255 453271 2851 Subcrop 0.0553 0.229 11.15 1.585 0.167

E43076 WGS 84 / UTM zone 19S 6628281 454913 2831 Outcrop 0.0544 13.3 15.25 0.1125 0.184

E43049 WGS 84 / UTM zone 19S 6628565 454963 2705 Dump 0.0493 7.01 109 3.9 0.176

E43004 WGS 84 / UTM zone 19S 6627747 455066 2709 Dump 0.0465 2.9 6.39 0.143 0.1415

E43050 WGS 84 / UTM zone 19S 6628569 454962 2703 Outcrop 0.0322 3.07 42.8 1.785 0.765

E43015 WGS 84 / UTM zone 19S 6626153 453465 2874 Outcrop 0.0285 0.005 0.65 0.00602 0.0088

E43023 WGS 84 / UTM zone 19S 6627604 454835 2665 Outcrop 0.0283 1.595 9.14 0.257 0.757

E43045 WGS 84 / UTM zone 19S 6628690 454973 2695 Dump 0.0281 1.855 26.3 1.43 0.286

E43047 WGS 84 / UTM zone 19S 6628658 454953 2705 Outcrop 0.0279 0.762 4.7 0.1445 0.552

E43025 WGS 84 / UTM zone 19S 6627557 454845 2658 Dump 0.0211 0.027 1.5 0.0191 0.0385

E43038 WGS 84 / UTM zone 19S 6626618 453059 2892 Outcrop 0.0178 0.006 0.49 0.0005 0.0055

E43046 WGS 84 / UTM zone 19S 6628668 454958 2704 Dump 0.0174 140.5 259 9.99 0.0493

E43001 WGS 84 / UTM zone 19S 6627622 455242 2680 Outcrop 0.016 0.749 4.27 0.19 0.1745

-5-

SAMPLE PREPARATION AND QA/QC

Sample preparation for projects in Argentina is carried out by ALS Minerals , at its facility located in

Mendoza with a nalyses carried out at their laboratory in Lima, Peru. Sample preparation includes

drying in an oven at a maximum temperature of 60°C, fine crushing of the sample to at least 70%

passing less than 2 mm, sample splitting using a riffle splitter, and pulverizing a 250 g split to at least

85% passing 75 microns (code PREP-31). The samples contained in this news release were analyzed

by methods Au-AA24 (Fire Assay Fusion and Atomic Absorption Spectrometry finish) and ME-MS61

(Four Acid Digestion with Mass Spectrometry finish) , the latter includes 48 elements (Al, Ag, As, Ba,

Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, In, K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb,

Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl, U, V, W, Y, Zn, Zr). Both digestion methods dissolve most minerals but

not all elements are quantitatively extracted in some sample matrices. ALS additionally collects a

subsample from the coarse reject to be analyzed by Terraspec with spectral data sent to AISIRIS

Australia to be processed and interpreted.

Control samples (standards, blanks, and duplicates) are inserted systematically, and their results

evaluated according to the Company protocols.

QUALIFIED PERSON

Luis Arteaga M.Sc. P.Geo., Vice President Exploration, is the Company's Qualified Person as defined by

NI 43-101. He has reviewed and approved the technical information in this news release.

ABOUT THE ZORRO PROJECT

The Zorro Project has been recently consolidated by Sable through signing of an option agreement

and ground staking, with a total 5,236-hectare land package. The project is located on the Frontal

Cordillera of San Juan, directly north of the Minsud/South32 Chita Valley Project which includes two

copper and polymetallic deposits: the Chinchillones deposit 1 containing indicated resources of 188

Mt @ 0.41% CuEq (0.25% Cu, 0.11 g/t Au, 10.6 g/t Ag, 36 ppm Mo, 0.16% Zn) and inferred resources

of 573 Mt @ 0.36% CuEq (0.22% Cu, 0.09 g/t Au, 9.0 g/t Ag, 93 ppm Mo, 0.11% Zn) ; and the Chita

South Porphyry Deposit 1 containing indicated resources of 33.1 Mt @ 0.43% Cu and inferred

resources of 8.6 Mt @ 0.40% Cu . Sable’s Don Julio Project which includes four active porphyry

targets (Gringa, Morro, Punta Cana, and Tocota) is located 21km west of Zorro.

Potential of the Zorro Project was recognized through Sable’s regional target generation work . The

project contains a number of historical mineral occurrences and workings surrounding a large

magnetic anomaly of about 7km by 4km that seems to be caused by a diorite stock which intrudes

Carboniferous sediments and Permo-Triassic granites.

ABOUT SABLE RESOURCES LTD.

Sable is a well-funded junior grassroots explorer focused on the discovery of Tier-One new precious

metal and copper projects through systematic exploration in endowed terranes located in favorable,

established mining jurisdictions. Sable’s focus is developing its large portfolio of new Greenfields

projects to resource level. Sable is actively exploring the San Juan Regional Program (163,969 ha)

incorporating the Don Julio, El Fierro, Cerro Negro , and Zorro projects in San Juan province,

Argentina and the Copper Queen (1 5,133 ha), Copper Prince (3,980 ha), and Core Mountain (1,925

ha) properties in British Columbia.

1 Mineral Resources Data from the Chita Valley Project was obtained from Minsud Resources Corp.’s website – www.minsud.com

-6-

For further information, please contact:

Ruben Padilla, President & CEO at [email protected] or +1 (520) 488-2520