Revival GOLD Provides Update and Latest Results from Drilling at the Mercur GOLD Project IN Utah
1
REVIVAL GOLD PROVIDES UPDATE AND LATEST RESULTS FROM
DRILLING AT THE MERCUR GOLD PROJECT IN UTAH
Toronto, ON – December 9th, 2025 – Revival Gold Inc. (TSXV: RVG, OTCQX: RVLGF) (“Revival Gold”
or the “Company”) is pleased to provide an update on the ongoing drilling program at the
Company’s Mercur Gold Project (“Mercur”) in Utah.
Highlights
Revival Gold has completed 108 holes for a total of 11,300 meters of the planned 13,000-
meter drilling program.
Received assay results from ten additional drill holes with the following highlight
intersections:
o 1.3 g/t gold over 18.3 meters width at 33.5 meters downhole in RM25-127
o 0.62 g/t gold over 24.4 meters width at 56.4 meters downhole in RM25-122
o 0.64 g/t gold over 18.3 meters width at 48.8 meters downhole in RM25-116
o 0.46 g/t gold over 56.4 meters width at 53.3 meters downhole in RMC25-133
Three intercepts extend outside the current pit designs indicating potential upside in the
Rover area of the deposit.
Continued confirmation of gold occurrence, grade and leachability with PEA estimates.
Drilling continues with two rigs turning and additional results are pending.
“Earlier this year, Revival Gold completed a Mercur PEA defining a simple, shallow heap leach gold
project. We are currently infill drilling inferred resources and have hit several intercepts outside
the resource area, indicating potential upside”, said Hugh Agro, President & CEO. “Overall, we
continue to see results consistent with the PEA resource and metallurgical estimates.”
Mr. Agro continued, “This year’s drilling is in support of a planned 2026 pre-feasibility study, the
next step on the path to restarting production at Mercur. We are almost 90% through the program
and are excited by the results to date.”
Details
Results for RM25-126, RM25-134 and RM25-133 extend outside the current pit designs indicating
potential upside in the Rover area. Leachability results for drill hole data collected to-date at Mercur
are consistent with the Inferred Mineral Resource and metallurgical models developed for the
Mercur Preliminary Economic Assessment (see “Preliminary Economic Assessment NI 43-101
2
Technical Report on the Mercur Gold Project, Tooele & Utah Counties, Utah, USA” prepared by
Kappes, Cassidy & Associates, and RESPEC Company LLC dated May 2 nd, 2025).
The program at Mercur commenced on July 12 th and is planned for 13,000 meters. Drilling is
ongoing with two RC drilling rigs focused on upgrading Inferred Mineral Resources. As of December
5, 2025, Revival Gold has completed 108 holes and 11,300 meters. Data collected will support the
Company’s planned 2026 pre-feasibility study (“PFS”), a major milestone on the path to restarting
gold production at Mercur.
Figure 1 describes drill hole locations for the results released today. Full drill results are presented
in Table 1.
Figure 1: Main Mercur Drill Plan Map
3
Table 1: Detailed Drill Results
Hole
Number Area Azimuth
(deg.)
Dip
(deg.)
From
(m)
To
(m)
Drilled
Width1
(m)
Fire
Assay
Gold
Grade2
(g/t)
AuCN/AuF
A Ratio
(%)3
RM25-115 Rover 320 -70 3.0 9.1 6.1 0.87 90
19.8 24.4 4.6 0.39 64
45.7 73.2 27.4 0.38 58
RM25-116 Rover 0 -90 4.6 12.2 7.6 1.00 91
21.3 25.9 4.6 0.36 71
48.8 67.1 18.3 0.64 50
RM25-122 Rover 90 -75 56.4 80.8 24.4 0.62 79
RM25-126 Rover 220 -70 16.8 42.7 25.9 0.34 32
RM25-127 Rover 300 -50 7.6 13.7 6.1 0.81 88
33.5 51.8 18.3 1.33 37
RM25-129 Rover 210 -60 7.6 13.7 6.1 0.72 88
36.6 45.7 9.1 0.38 13
50.3 57.9 7.6 0.30 46
65.5 73.2 7.6 0.29 95
RM25-133 Rover 140 -60 7.6 12.2 4.6 0.99 87
53.3 109.7 56.4 0.46 80
RM25-134 Rover 70 -60 9.1 12.2 3.0 1.18 98
50.3 57.9 7.6 0.75 73
67.1 76.2 9.1 0.40 51
RMC25-016 Rover 0 -90 43.8 45.8 2.0 0.38 90
51.6 80.0 28.4 0.33 81
RMC25-018 Rover 0 -90 16.5 19.2 2.7 0.29 16
37.6 54.4 16.9 0.96 38
1 True width for all holes is estimated to be 70-100% of drilled width. Numbers may not add up due to rounding.
2 Mineralized intercepts calculated based on a 0.17 g/t cutoff grade allowing up to 2 intervals of internal dilution.
3 AuCN/AuFA is the ratio of cyanide soluble gold assay to total gold in fire assay and provides an indication of
potential heap leach recoverability for the material sampled.
The Mercur property includes interests optioned from Barrick Resources (USA) Inc. and others as
summarized in the Company’s Preliminary Economic Assessment NI 43-101 Technical Report on the
Mercur Gold Project, Tooele & Utah Counties, Utah, USA prepared by Kappes, Cassidy & Associates,
and RESPEC Company LLC dated May 2nd, 2025, for further details.
4
QA/QC Program
Quality Assurance/Quality Control consists of the regular insertion of certified reference materials,
duplicate samples, and blanks into the sample stream. Sample results are analyzed immediately
upon receipt, and all discrepancies are investigated. Samples are submitted to the ALS
Geochemistry sample preparation facility in Elko, Nevada. Gold analyses are performed at the ALS
Geochemistry laboratory in Reno, Nevada or Vancouver, British Columbia, and multi-element
geochemical analyses are completed at the ALS Minerals laboratory in Vancouver, British Columbia.
ALS Minerals is an ISO/IEC 17025:2017 accredited lab.
Gold assays are determined on reverse circulation drill cuttings and quarter-sawn PQ core by fire
assay and Atomic Absorption Spectroscopy (AAS) on a 30-gram nominal sample weight (Au-AA23).
One quarter of the PQ core samples were submitted for assay, one quarter is kept for sample
archive, and one half is preserved for future metallurgical column tests. For samples containing
greater than 100 ppb Au as determined by Fire Assay, gold content is also determined by cyanide
leach with an AAS finish on a nominal 30-gram sample weight (Au-AA13). Multi-element
geochemical analyses are completed on composites samples from selected drill holes using the ME-
MS 41 method.
Qualified Persons
Technical information included in this news release was reviewed and approved by Mr. John Meyer,
P.Eng., a QP and Vice President, Engineering and Development for the Company, and Mr. Dan Pace,
RM SME, a QP and Chief Geologist for the Company.
About Revival Gold Inc.
Revival Gold is one of the largest, pure gold mine developers in the United States. The Company is
advancing development of the Mercur Gold Project in Utah and mine permitting preparations and
ongoing exploration at the Beartrack-Arnett Gold Project located in Idaho. Revival Gold is listed on
the TSX Venture Exchange under the ticker symbol “RVG” and trades on the OTCQX Market under
the ticker symbol “RVLGF”. The Company is headquartered in Toronto, Canada, with its exploration
and development office located in Salmon, Idaho.
For further information, please contact:
Scott Trebilcock, VP, Corporate Development & Investor Relations
Telephone: (416) 366-4100 or Email: [email protected]
5
Cautionary Statement
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture
Exchange) accepts responsibility for the adequacy or accuracy of this release.
This press release contains "forward-looking information" within the meaning of applicable Canadian securities legislation and
"forward-looking statements" within the meaning of the U.S. Private Securities Litigation Reform Act of 1995 (collectively, "forward-
looking statements"). Forward-looking statements are not comprised of historical facts. Forward-looking statements include
estimates and statements that describe the Company’s future plans, objectives or goals, including words to the effect that the
Company or management expects a stated condition or result to occur. Forward-looking statements may be identified by such terms
as “believes”, “anticipates”, “expects”, “estimates”, “may”, “could”, “would”, “will”, or “plan”. Since forward-looking statements are
based on assumptions and address future events and conditions, by their very nature they involve inherent risks and uncertainties.
Although these statements are based on information currently available to the Company, the Company provides no assurance that
actual results will meet management’s expectations. Risks, uncertainties, and other factors involved with forward-looking
statements could cause actual events, results, performance, prospects, and opportunities to differ materially from those expressed
or implied by such forward-looking statements. Forward-looking statements in this news release include, but are not limited to:
Statements with respect to the Company’s exploration, metallurgy, permitting and development activities, the goals and expected
outcomes of the planned drilling and development program at Mercur, and the expectation that the Company will proceed with the
potential completion of a PFS and formal launch of mine permitting on the Project.
Forward-looking statements and information involve significant known and unknown risks and uncertainties, should not be read as
guarantees of future performance or results and will not necessarily be accurate indicators of whether or not such results will be
achieved. A number of factors could cause actual results to differ materially from the results expressed or implied by such forward-
looking statements or information, including, but not limited to: the Company's ability to finance the development of its mineral
properties; uncertainty as to whether there will ever be production at the Company's mineral exploration and development
properties; risks related to the Company's ability to commence production at the projects and generate material revenues or obtain
adequate financing for its planned exploration and development activities; uncertainties relating to the assumptions underlying
resource and reserve estimates; mining and development risks, including risks related to infrastructure, accidents, equipment
breakdowns, labour disputes, bad weather, non-compliance with environmental and permit requirements or other unanticipated
difficulties with or interruptions in development, construction or production; the geology, grade and continuity of the Company's
mineral deposits; the uncertainties involving success of exploration, development and mining activities; permitting timelines;
government regulation of mining operations; environmental risks; unanticipated reclamation expenses; prices for energy inputs,
labour, materials, supplies and services; uncertainties involved in the interpretation of drilling results and geological tests and the
estimation of reserves and resources; unexpected cost increases in estimated capital and operating costs; the need to obtain permits
and government approvals; material adverse changes, unexpected changes in laws, rules or regulations, or their enforcement by
applicable authorities; the failure of parties to contracts with the company to perform as agreed; social or labour unrest; changes in
commodity prices; and the failure of exploration programs or studies to deliver anticipated results or results that would justify and
support continued exploration, studies, development or operations. For a more detailed discussion of such risks and other factors
that could cause actual results to differ materially from those expressed or implied by such forward-looking statements, refer to
other risks and uncertainties disclosed in the Company’s public filings with Canadian securities regulators, including its most recent
annual information form and management’s discussion and analysis, available at www.sedarplus.ca. The forward-looking statements
contained in this press release are made as of the date of this press release. Except as required by law, the Company disclaims any
intention and assumes no obligation to update or revise any forward-looking statements, whether as a result of new information,
future events or otherwise. Additionally, the Company undertakes no obligation to comment on the expectations of, or statements
made by, third parties in respect of the matters discussed above.