Revival Gold Announces Initial Beartrack Metallurgical Test Results
1
Revival Gold Announces Initial
Beartrack Metallurgical Test Results
Toronto, ON – October 15th, 2018 – Revival Gold Inc. (TSXV: RVG, OTCQB: RVLGF) (“Revival Gold”
or the "Company"), a growth -focused gold exploration and development company, announces
results from an initial phase of metallurgical testwork on sulphide and transitional material from
the Beartrack gold project (“Beartrack”) located in Lemhi County, Idaho.
Summary Results
• Six composite samples selected from sulphide and transitional mineralization in various
rock units at Beartrack were submitted to SGS Mineral Services (“SGS”) in Vancouver,
Canada in April 2018 for an initial phase of metallurgical testwork.
• Testwork focused on minerology, updating historical floatation results and the potential
for ultra -fine grinding to liberate gold without the need for pre -oxidation of sulphide
material in the Beartrack process flowsheet.
• Results released today indicated favorable gold recoveries into rougher flotation
concentrate and from cyanidation of flotation tails for the six samples tested with
combined gold recoveries ranging from 83% to 99%.
• Overall gold recoveries using ultra-fine grind, conventional flotation and intensive leach
of concentrates for the six samples tested had recoveries ranging from 49% to 77% . As
suggested by historical metallurgical testwork, pre-oxidation of concentrates is deemed
necessary to improve overall flowsheet gold recovery.
• A second phase of metallurgical work will be pursued to assess the various pre-oxidation
processes available such as pressure oxidation, the Albion process and the Dundee
process.
“The level of gold recovery to flotation concentrates observed in SGS’s results is encouraging and
represents a good start to Revival Gold’s planned program to update the metallurgical testwork
on sulphide material at Beartrack ”, said Hugh Agro, President and CEO. “The next phase of
metallurgical work will focus on the various pre -oxidation processes available for treatment of
concentrates. Meanwhile, drilling will continue as Revival Gold seeks to grow both leachable and
mill resources on the Company’s combined Beartrack-Arnett land position”, he added.
2
Details
Revival Gold’s May 2018 maiden mineral resource at Beartrack (“Mineral Resource”) was
categorized as leachable (oxide and transitional) or mill (predominately sulphide) material
depending on the metallurgical and economic characteristics of each block in the Mineral
Resource block model.
Metallurgical characteristics of the leachable material at Beartrack are relatively well -defined
given the project’s history as a successful heap leach mine operated by Meridian Gold Com pany
(“Meridian”) in the 1990’s. A leach recovery of 85% of the cyanide soluble gold grade for leach
material was assumed in the Mineral Resource based on past testwork by Meridian (Hazen, 1989-
90) and the level of recovery realized at the historic operation.
Metallurgical characteristics of the mill material at Beartrack are less well-defined. Past testwork
by Meridian (Hazen, 1989-90) suggested the use of pressure oxidation as a pre-oxidizing step for
flotation concentrates derived from mill material in the Mineral Resource. Based on this past
testwork, a pressure oxidation flowsheet and an assumed mill recovery of 84% of the fire assay
gold grade was used in the Mineral Resource estimate.
In conjunction with Revival Gold’s 2018 exploration program at Beartrack, the Company initiated
a first phase of metallurgical testwork focused on minerology , updating historical floatation
results and the potential for ultra-fine grinding to liberate gold without the need for pre-oxidation
of sulphide material . Six composite samples from Beartrack were subm itted to SGS Mineral
Services in Vancouver, Canada in April 2018 . The samples were selected from sulphide and
transitional mineralization in various rock units in the South Pit, Ward’s Gulch and Joss areas at
Beartrack.
The flowsheet test configuration i ncluded initial grinding (to a P80 of 40 µm) and rougher
flotation followed by intensive leaching of flotation concentrate s and cyanidation of flotation
tails. Flotation concentrates underwent a regrinding stage (to a P80 of 5-10 µm) prior to leaching.
During flowsheet development testwork, a master composite was produced and subjected to a
variety of test conditions during all stages of the flowsheet to determine the most appropriate
conditions going forward in preparation for the flowsheet testing stage.
Mineralogy and f lowsheet development testwork on the master composite and on the six
individual composites from Beartrack generated the following results:
3
Head Characterization -
• Individual composite head assays ranged from 0.69 to 6.07 g/t Au, fr om <200 to 14,500
ppm As, from 0.43 to 2.20% S, and from 0.02 to 1.07 % C.
• The master composite grade was 2.11 g/t Au, 4,000 ppm As, 1.46% S, and 0.32% C.
• Gangue minerology was composed mostly of light silicates such as quartz.
• Pyrite and arsenopyrite were the dominant sulphide phases.
• Gold grains were typically 5 -50 μm in size and were found to be poorly liberated and in
close association with the sulphide phases.
Flowsheet Test Results -
• Gold recoveries into individual composite rougher concentrates ranged from 64% to 98%
with mass pulls ranging from 15% to 21%.
• Intensive leaching of rougher flotation concentrates yielded gold extractions from
flotation concentrates ranging from 48% to 81% and averaged 62%.
• Cyanidation of rougher flotation tailings yielded gold extractions ranging from 40% to 82%
and averaged 68%.
• Gold recoveries into rougher flotation concentrate and from cyanidation of flotation tails
yielded combined recoveries ranging from 83% to 99% and averaging 94%.
• Overall gold recoveries using ultra -fine grind, conventional flotation and intensive
leaching of concentrates yielded recoveries of 49% to 7 7% and averaging 62% . Pre-
oxidation of concentrates is deemed necessary to improve on overall flowsheet gold
recovery.
Next Steps
A follow up phase of metallurgical testing was recommended by SGS including the following key
items:
• Additional work to best understand the sub-microscopic gold component using Dynamic
Secondary Ion Mass Spectroscopy (D-SIMS).
• Evaluation of options to improve gold extraction from the flotation concentrate including
updated evaluation of pressure oxidation as well as an initial evaluation of other oxidation
processing options such as the Albion and Dundee processes. Th e Albion process was
developed in 1994 and uses a combination of ultra-fine grinding and oxidative leaching at
atmospheric pressure to liberate gold from sulphide ore. The more recently developed
4
Dundee chlorination process uses sodium hypochlorite with a catalytic amount of sodium
hypobromite in acidic conditions to put gold into solution . Both processes have been
successfully commercialized.
• An extension of the metallurgical testing of sulphide and transitional mineralization in to
other rock units and other mineralized areas at the Beartrack project.
Over the coming months, Revival Gold will assemble additional metallurgical sample material and
further develop the Company’s next phase of metallurgical testing. Metallurgical testwork will be
targeted to dovetail with the potential initiation of a resource update for Beartrack-Arnett in late
2019.
Steven T. Priesmeyer, C.P.G., Vice President Exploration, Revival Gold Inc., is the Company's
designated Qualified Person for this news release within the meaning of National Instrument 43-
101 Standards of Disclosure for Mineral Projects and has reviewed and approved its scientific and
technical content.
About Revival Gold Inc.
Revival Gold Inc. is a growth-focused gold exploration and development company. The Company
has the right to acquire a 100% interest in Meridian Beartrack Co., owner of the former producing
Beartrack Gold Project located in Lemhi County, Idaho. Revival also owns rights to a 100% interest
in the neighbouring Arnett Gold Project.
In addition to its interests in Beartrack and Arnett, the Company is pursuing other gold
exploration and development opportunities and holds a 51% interest in the Diamond Mountain
Phosphate Project located in Uintah County, Utah.
Revival Gold has approximately 42 million shares outstanding and had a working capital balance
of approximately $1.8 million as at September 30th, 2018. Additional disclosure of the Company’s
financial statements, technical report s, material change reports, news releases and other
information can be obtained at www.revival-gold.com or on SEDAR at www.sedar.com.
For further information, please visit www.revival-gold.com or contact:
Andrea Totino, Investor Relations Manager
Telephone: (416) 366-4100
Email: [email protected]
5
Cautionary Statement
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of
this news release.
This News Release includes certain "forward -looking statements" which are not comprised of
historical facts. Forward-looking statements include estimates and statements that describe the
Company’s future plans, objectives or goals, including words to the effect that the Company or
management expects a stated condition or result to occur. Forward -looking statements may be
identified by such terms as “believes”, “anticipates”, “expects”, “estimates”, “may”, “could”,
“would”, “will”, or “plan”. Since forward -looking statements are based on assumptions and
address future events and conditions, by their very nature they involve inherent risks and
uncertainties. Although these statements are based on information currently available to the
Company, the Company provides no assurance that actual results will meet management’s
expectations. Risks, uncertainties and other factors involved with forward-looking information
could cause actual events, results, performance, prospects and opportunities to differ materially
from those expressed or implied by such forward -looking information. Forward looking
information in this news release includes, bu t is not limited to, the Company’s objectives, goals
or future plans, statements, exploration results, potential mineralization, the estimation of
mineral resources, exploration and mine development plans, timing of the commencement of
operations and estimates of market conditions. Factors that could cause actual results to differ
materially from such forward -looking information include, but are not limited to failure to
identify mineral resources, failure to convert estimated mineral resources to reserves, the
inability to complete a feasibility study which recommends a production decision, the preliminary
nature of metallurgical test results, delays in obtaining or failures to obtain required
governmental, environmental or other project approvals, political risks, uncertainties relating to
the availability and costs of financing needed in the future, changes in equity markets, inflation,
changes in exchange rates, fluctuations in commodity prices, delays in the development of
projects, capital, operating an d reclamation costs varying significantly from estimates and the
other risks involved in the mineral exploration and development industry, and those risks set out
in the Company’s public documents filed on SEDAR. Although the Company believes that the
assumptions and factors used in preparing the forward-looking information in this news release
are reasonable, undue reliance should not be placed on such information, which only applies as
of the date of this news release, and no assurance can be given that such events will occur in the
disclosed time frames or at all. The Company disclaims any intention or obligation to update or
revise any forward-looking information, whether as a result of new information, future events or
otherwise, other than as required by law.