Pancon Reports Detectable Gold in All 104 Phase 2 RAB Drill Holes, Including 2 Holes 150 & 300 Meters West of Former Brewer Gold Mine Each with 6-Meter Intervals of >1.00 g/t Au
Pancon Reports Detectable Gold in All 104
Phase 2 RAB Drill Holes, Including 2 Holes 150
& 300 Meters West of Former Brewer Gold
Mine Each with 6-Meter Intervals of >1.00 g/t
Au
Toronto, Ontario--(Newsfile Corp. - December 21, 2021) - Pancontinental Resources Corporation
(TSXV: PUC) (OTCQB: PUCCF) ("Pancon" or the "Company") provides drill results for Phase 2 shallow
rotary air blast (RAB) drill holes, and for Phase 2 diamond core drill holes 16 and 17, at its flagship
Brewer Gold & Copper Project in South Carolina, USA (see Figures 1 & 2 and Tables 1 & 2). All 104
Phase 2 RAB drill holes contain detectable gold (using the laboratory's 5 ppb detection limit) and end
less than 25 meters below surface. The average gold grade of all 1,437 RAB drill samples is nearly 100
ppb (0.1 ppm), and 87.5% of all RAB holes contain at least one sample grading higher than 50 ppb
(0.05 ppm) gold.
Highlights:
RAB Hole B21B-100 - located ~150 meters (m) west of the former mine, intersected 21 m of 0.46
g/t Au starting at 3 m below surface, including 6 m of 1.2 g/t Au
RAB Hole B21B-111 - located ~300 meters west of the former mine, intersected 13.7 m of 0.59 g/t
Au starting at 6 m below surface, including 6 m of 1.0 g/t Au
RAB Hole B21B-153 - located ~100 meters south of the former mine, intersected 7.6 m of 0.69 g/t
Au starting at 16.7 m below surface, including 3 m of 0.90 g/t Au
RAB Hole B21B-175 - located immediately east of the former main pit (and immediately west of
the former ancillary B6 pit), intersected 10.7 m of 0.47 g/t Au, including 3 m of 0.90 g/t Au
Core Hole B21C-016 - located 350 meters north-northwest of the former mine, remained within a
package of strongly altered volcanic rocks for 380 meters
Results of the Phase 2 RAB drill program expand the footprint of near-surface gold mineralization on the
Brewer property, and specifically define an attractive drill target to the west of the former mine. This
western target area returned values up to 2.4 g/t Au (B21B-100) and, to Pancon's knowledge, has not
previously been tested by core drilling. Several of Pancon's RAB holes in this area were stopped short of
their maximum depth due to extremely hard and slow drilling conditions, likely related to the presence of
topaz similar to that documented in and below the former Brewer mine. Pending spectral analyses will
help confirm the presence and relative abundance of topaz and other key alteration minerals, and will
complement the geochemical data to better define drill targets.
Regarding the results of the last two diamond core drill holes in Phase 2, Hole 16 was significant in that it
was drilled 350 meters north-northwest of the former mine and remained within a package of strongly
altered and mineralized volcanics for 380 meters. Alteration included a distinctive "patchy"
aluminosilicate alteration zone that has been recognized in association with breccia-hosted Au-Cu
mineralization beneath the former Brewer pit. Although no ore-grade mineralization was encountered in
Hole 16, the degree of alteration and presence of a different suite of Cu-bearing sulphide minerals,
namely chalcopyrite and bornite, are considered encouraging. Whereas Cu-bearing zones identified in
earlier Pancon drilling have been comprised of an enargite-chalcocite-covellite assemblage, the
identification of chalcopyrite-bornite mineralization may indicate the presence of a higher temperature
part of the Brewer system.
Pancon President and CEO Layton Croft stated:
"
We have now reported on drill results from all diamond
core, RAB and sonic holes drilled to date. The results are compelling. We have taken advantage of
unusually slow lab turnaround times to compile and analyze a large amount of high quality geological,
geochemical, geophysical and mineralogical data. Our Geological Compilation & Discovery Model
update work is progressing according to plan. We are more confident than ever in the potential for new
discoveries across our Brewer-Jefferson land package, both in a brecciated upper zone as well as in a
deeper mineralized lower zone. We have identified high priority targets for Phase 3 drilling, which is
planned to commence in the first quarter of 2022."
Figure 1 shows the results of Pancon's Phases 1 and 2 RAB drilling, as well as historic production
blasthole data from the Brewer, B6, and NWT open pits. The data shows a halo of near-surface gold
mineralization around the former mine and what appears to be an extension of mineralization to the west.
This western target area provides a high priority exploration target for follow-up core drilling in 2022.
Figure 1: Results of Pancon's RAB Drilling in Comparison to Historic Production Blasthole
Data
To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/5156/108147_0db2abae344d4a25_003full.jpg
RAB assay results were composited using a cut-off grade of 0.1 g/t Au over a minimum of 3.0 meters,
allowing a maximum of one internal interval (1.5 meters) below the cut-off grade to be included in the
composite. Grade times thickness (GxT) values were calculated only for holes that met the composite
criteria. Pancon RAB drill holes were oriented vertically and drilled to a maximum depth of 24.39
meters (80 feet). Production blastholes are shown for comparative purposes across the NWT, Brewer,
and B6 pits of the former mine. GxT values were calculated using the reported Au value (determined
by a cyanide leach assay) and the bench height of the former mine (6.10 meters or 20 feet).
Figure 2: Intense Silcification and Minor Chalcopyrite Mineralization at ~290 Meters
Downhole
in Hole B21C-016
To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/5156/108147_0db2abae344d4a25_004full.jpg
Table 1: Selected Results from Phase 2 RAB Drill Program
(
see here for Certificates of Analysis and complete results
)
Hole ID
From (m)
To (m)
Interval (m)
Au (g/t)
GxT
B21B-100
Incl.
3.05
7.62
24.38
12.19
21.33
4.57
0.48
1.51
10.24
6.90
B21B-111
Incl.
6.10
13.72
19.81
19.81
13.68
6.09
0.59
1.03
8.07
6.27
B21B-153
Incl.
16.76
21.34
24.38
24.38
7.62
3.04
0.69
0.90
5.26
2.74
B21B-175
Incl.
1.52
3.05
12.19
6.10
10.67
3.05
0.47
0.90
5.01
2.75
Table 2: Select Results from Core Holes 16 and 17
(
see here for Certificates of Analysis and complete results
)
Hole ID
From (m)
To (m)
Interval (m)
Au (g/t)
B21C-016
4.70
12.50
7.80
0.22
and
222.00
230.00
8.00
0.21
and
368.50
373.00
4.50
0.23
B21C-017
2.20
13.60
11.40
0.27
See Quality Assurance and Quality Control Statement below regarding assaying techniques. Intervals are core lengths and are not presumed to
be true thicknesses.
Quality Assurance and Quality Control Statement, Notes and Assumptions
Phase 2 exploration diamond core drilling was HQ and NQ size. The core was logged and marked for
sampling and assaying by geologists contracted by Pancon. Samples, typically 1.5 meters in length,
were sawn in half using a diamond core saw and one-half of the core was placed in sample bags and
tagged with unique sample numbers, while the remaining half was kept in the core box for storage. Each
bagged core sample was shipped to SGS Labs in Ontario, Canada, where it was dried, crushed and
pulverized to >80% passing -200 mesh.
Gold was analyzed by fire assay (30 g) with an AAS (atomic absorption) finish, with a lower detection
limit of 0.005 g/t gold. Samples containing greater than 10.0 g/t gold were analyzed by fire assay with a
gravimetric finish. Multielement analyses, including base metals and rare earth elements, were analyzed
with ICP-MS/ICP-AES (inductively coupled argon plasma mass spectrometry/atomic emission
spectroscopy). Strict sampling and QA/QC protocols are followed, and assay integrity is monitored
internally with a quality control program including the insertion of standards, blanks and duplicates in the
sample stream on a regular basis.
Qualified Person
The technical information in this news release has been prepared in accordance with Canadian
regulatory requirements as set out in NI 43-101 and reviewed and approved by Patrick Quigley, MSc,
CPG-12116, a Qualified Person as defined by NI 43-101.
About Pancon
Pancontinental Resources Corp. (TSXV: PUC) (OTCQB: PUCCF), or Pancon, is a Canadian junior
mining company exploring the rich, underexplored Carolina Slate Belt in the southeastern USA. In
January 2020, Pancon won the exclusive right to explore and purchase the former Brewer Gold Mine
property, with an option period through October 2023. Between 1987-1995, Brewer produced 178,000
ounces of oxide gold from open pits that extended to 65-meter depths, where gold (Au) and copper (Cu)
sulphides were exposed but could not be processed by the oxide heap leach operation. Pancon's
100%-owned, 1,960-acre Jefferson Gold Project nearly completely surrounds the 1,000-acre Brewer
property. The Brewer-Jefferson area of interest, in Chesterfield County, South Carolina, is 12 kilometers
along trend from the producing Haile Gold Mine, which produced 101,600 ounces of gold in the first half
of 2021 (
www.oceanagold.com
). Brewer is a large, epithermal, high sulphidation gold-copper system
driven by a sub-volcanic intrusive, possibly connected to a large copper-gold porphyry system at depth
(Schmidt, R.G., 1978, The Potential for Porphyry Copper-Molybdenum Deposits in the Eastern United
States, U.S. Geological Survey).
For further information, please contact:
Jeanny So, External Relations Manager
E:
T: +1.647.202.0994
For additional information please visit our new website at
http://www.panconresources.com/
and our
Twitter feed:
@PanconResources
.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
This news release contains forward-looking information which is not comprised of historical facts.
Forward-looking information is characterized by words such as "plan", "expect", "project", "intend",
"believe", "anticipate", "estimate" and other similar words, or statements that certain events or
conditions "may" or "will" occur. Forward-looking information involves risks, uncertainties and other
factors that could cause actual events, results, and opportunities to differ materially from those
expressed or implied by such forward-looking information. Factors that could cause actual results to
differ materially from such forward-looking information include, but are not limited to, changes in the
state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required
regulatory or governmental approvals, and other risks involved in the mineral exploration and
development industry, including those risks set out in the Company's management's discussion and
analysis as filed under the Company's profile at
www.sedar.com
. Forward-looking information in this
news release is based on the opinions and assumptions of management considered reasonable as of
the date hereof, including that all necessary governmental and regulatory approvals will be received
as and when expected. Although the Company believes that the assumptions and factors used in
preparing the forward-looking information in this news release are reasonable, undue reliance should
not be placed on such information. The Company disclaims any intention or obligation to update or
revise any forward-looking information, other than as required by applicable securities laws.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/108147