Red Pine Commences Surface Trenching and Sampling Programme in Potential Open Pit Areas at Wawa Gold Project
Red Pine Commences Surface Trenching and Sampling Programme in
Potential Open Pit Areas at Wawa Gold Project
TORONTO--(BUSINESS WIRE)--October 9, 2025--Red Pine Exploration Inc. (TSXV: RPX,
OTCQB: RDEXF) (“Red Pine” or the “Company”) is pleased to announce the commencement
of a new surface trenching and geologic mapping and sampling program at the Wawa Gold
Project, that aims to better define the geometry of the gold mineralization in the areas with open
pit potential (See Press Release dated May 8, 2025).
Michael Michaud, President and CEO of Red Pine, commented: “We are pleased to announce
that a surface trenching program has started in the northern zone, targeting a potential open pit,
where recent drilling has returned a number of higher-grade intersections.
The mapping and sampling of near-surface mineralization is a cost-effective way to collect vital
data about the distribution and geometry of gold mineralization, that will support any future
mining assessment.
We remain excited about the open pit potential of this northern area, that will form part of the
updated mineral resource estimate and preliminary economic assessment (“PEA”) expected to be
released in H1 2026.”
Mechanized trenching program in the Potential North Pit area
The North Pit area is located at the northern end of one of the ore shoots in the Jubilee Shear
where the Jubilee Intrusive Stock is comprised of relatively homogeneous dioritic and tonalitic
intrusions. This homogeneity of the Jubilee Intrusive Stock favoured the development of large
fractures that were filled in and above the Jubilee Shear by an array of gold mineralized quartz
veins forming a broad zone of gold mineralization with locally very significant gold enrichment.
Mechanized trenching is targeting the surface projection of high-grade gold mineralization over
approximately 60 metres (“m”) along the strike of the Jubilee Shear within the mining patents
and leases. Smaller satellite trenches will also be completed beyond the principal trench along
significant veins identified in the main trench to extend the known mineralization. Detailed
geological mapping and methodical channel sampling of the veins will be done on the main
quartz veins observed on the trenches. Previous significant drilling intersections in the North Pit
area include (Figure 1 and 2):
45.38 grams per tonne gold (“g/t Au”) over 3.13 m core length, including 141.00 g/t Au
over 0.88 m in hole SD-25-559 (see press release of June 18, 2025)
14.51 g/t Au over 4.81 m, including 90.40 g/t Au over 0.67 m in hole SD-25-552 (see
press release of May 12, 2025)
Previous intersections from the same area reported in the National Instrument 43-101
Technical Report dated September 30, 2024 include:
o 109.00 g/t Au over 0.86 m in historical hole U0590L3;
o 176.00 g/t Au over 0.78 m in hole SD-16-45.
Baseline studies
Baseline studies continue to progress on the project. Key developments include the installation of
8 monitoring wells, packer testing of drill holes in the areas identified for open pit potential to
better constrain groundwater movement, and additional data collection on fauna (Figure 3).
The mineral resource estimation, as well as mine design and metallurgical studies, which will be
included in the PEA targeted for release in the first half of 2026, are also continuing.
Quality Assurance/Quality Control ("QA/QC") Measures
Individual drill core samples are labelled and sawn in half along a pre-marked cutting line. A
consistent half-core sample is then placed in an individual numbered plastic sample bag that is
sealed. The remaining half-core samples are kept at the Company’s core storage facility located
on the Wawa Gold project. Quarter-core duplicates are taken from certain samples to define the
variability of gold distribution. Groups of samples are then placed into durable rice bags sealed
with security seals to be transported by commercial carrier for analysis at Activation
Laboratories Ltd. (Actlabs), Ancaster, Ontario. NQ core assays are obtained by 50-gram fire-
assay with a AA finish or by 1-kilogram metallic screen fire assay. The 1-kilogram metallic
screen assay method is selected for samples anticipated to contain coarse gold and when the
original fire-assay returns results greater or equal to 2.25 g/t Au. The residual coarse reject
portions of the samples remain in storage for a minimum 90-day period if further work or
verification is needed.
As part of its QA/QC program, Red Pine inserts external gold standards (low- to high-grade) and
blanks every 20 samples and routinely inserts blanks immediately after samples with visible
gold. Quarter core duplicates are routinely inserted to evaluate the natural variability of gold
mineralization. Assay certificates are sent to at least three members of the senior management
team, and they are directly accessible from the WebLIMS portal of Actlabs. Approximately 5%
of the pulps and coarse rejects analyzed at Actlabs are sent to Agat Laboratories in Thunder Bay
for umpire testing.
Qualified Person
Jean-Francois Montreuil, P.Geo. and Vice President, Exploration of Red Pine and the Qualified
Person, as defined by National Instrument 43-101, has reviewed and approved the technical
information contained in this news release.
About Red Pine Exploration Inc.
Red Pine Exploration Inc. is a gold exploration company headquartered in Toronto, Ontario,
Canada. The Company's shares trade on the TSX Venture Exchange under the symbol "RPX"
and on the OTCQB Markets under the symbol “RDEXF”.
The Wawa Gold Project is in the Michipicoten Greenstone Belt of Ontario, a region that has seen
major investment by several producers in the last five years. The Company’s land package hosts
numerous historic gold mines and is over 7,000 hectares in size. Red Pine is building a strong
position as a major mineral exploration and development player in the Michipicoten region.
For more information about the Company, visit www.redpineexp.com
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of
this release.
Cautionary Note Regarding Forward-Looking Information
This news release contains statements which constitute “forward-looking information” within the
meaning of applicable securities laws, including statements regarding the plans, intentions,
beliefs and current expectations of the Company with respect to future business activities and
operating performance.
Forward-looking information is often identified by the words “may”, “would”, “could”,
“should”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect” or similar
expressions. Forward-looking information contained in this news release includes, but may not
be limited to, statements regarding the surface stripping and trenching program helping to
estimate the gold in the area and its geometry for any future mining assessment; the release of a
mineral resource estimate and PEA in H1 2026; smaller satellite trenches being completed
beyond the principal trench along significant veins identified in the main trench to extend the
known mineralization; and detailed geological mapping and methodical channel sampling of the
veins being done on the main quartz veins observed on the trenches.
Investors are cautioned that forward-looking information is not based on historical facts but
instead reflects management’s expectations, estimates or projections concerning future results or
events based on the opinions, assumptions and estimates of management considered reasonable
at the date the statements are made. Such opinions, assumptions and estimates are inherently
subject to a variety of risks and uncertainties that could cause actual events or results to differ
materially from those projected and undue reliance should not be placed on such information, as
unknown or unpredictable factors could have material adverse effects on future results,
performance or achievements. Among the key factors that could cause actual results to differ
materially from those projected in the forward-looking information are: the Company's
expectations in connection with the projects and exploration programs being met, the impact of
general business and economic conditions, global liquidity and credit availability on the timing
of cash flows and the values of assets and liabilities based on projected future conditions,
fluctuating gold prices, currency exchange rates (such as the Canadian dollar versus the United
States Dollar), variations in ore grade or recovery rates, changes in accounting policies, changes
in the Company's mineral reserves and resources, changes in project parameters as plans
continue to be refined, changes in project development, construction, production and
commissioning time frames, the possibility of project cost overruns or unanticipated costs and
expenses, higher prices for fuel, power, labour and other consumables contributing to higher
costs and general risks of the mining industry, failure of plant, equipment or processes to operate
as anticipated, unexpected changes in mine life, seasonality and weather, costs and timing of the
development of new deposits, success of exploration activities, permitting time lines,
government regulation of mining operations, environmental risks, unanticipated reclamation
expenses, title disputes or claims, and limitations on insurance.
This information contained in this news release is qualified in its entirety by cautionary
statements and risk factor disclosure contained in filings made by the Company, including the
Company’s financial statements and related MD&A for the year ended July 31, 2024, and the
interim financial reports and related MD&A for the period ended January 31, 2024, April 30,
2024, October 31, 2024, January 31, 2025, April 30, 2025 and July 31, 2025, filed with the
securities’ regulatory authorities in certain provinces of Canada and available at
www.sedarplus.ca.
Should one or more of these risks or uncertainties materialize, or should assumptions underlying
the forward-looking information prove incorrect, actual results may vary materially from those
described herein as intended, planned, anticipated, believed, estimated or expected. Although the
Company has attempted to identify important risks, uncertainties and factors which could cause
actual results to differ materially, there may be others that cause results not to be as anticipated,
estimated or intended. The Company does not intend, and does not assume any obligation, to
update this forward-looking information except as otherwise required by applicable law.
Contacts
Michael Michaud, President and Chief Executive Officer, at (416) 364-7024 or
Or
Manish Grigo, Director of Corporate Development, at (416) 569-3292 or