Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

RKR.V ·

Rokmaster intersects 8.84 g/t AuEq over 4.20 m on northwestern extension of Revel Ridge Main Zone

Drill Results

Rokmaster intersects 8.84 g/t AuEq over 4.20

m on northwestern extension of Revel Ridge

Main Zone

VANCOUVER, BC

,

Nov. 28, 2022

/CNW/ - Rokmaster Resources Corp. (TSXV: RKR) (OTCQB:

RKMSF) (FSE: 1RR1) ("Rokmaster" or "the Company") is pleased to announce a strong intersection

of the Revel Ridge Main Zone ("RRMZ") by drillhole RR22-102a at the Revel Ridge Project ("Revel

Ridge" or "the Project").

Longitudinal Section with drill results (CNW Group/Rokmaster Resources Corp.)

Drillhole RR22-102a was wedged to completion around the core barrel which broke due to

equipment wear at 222.5 metres. The primary drillhole (RR22-102) intersected strong sphalerite-

galena mineralization in a silicified limestone between

206.90 m

and

211.50 m

which represents the

Yellowjacket Zone ("RRYZ"). Notably, this intersection occurs 65 m from RR21-50, the nearest

drillhole hosting RRYZ mineralization. The RRYZ was encountered a second time in the wedge hole

(RR22-102a) which is tabulated below.

The Main Zone ("RRMZ") is located at the base of a thick carbonate unit at

287.3 m

. Similar to

drillhole RR22-101 (see

Press Release dated

Sept. 26, 2022

), the RRMZ in RR22-102a is primarily

developed in a footwall quartzite package. This favorable carbonate-quartzite contact, which

supports metre-scale massive sulphide bands in the RRMZ, may be laterally extensive with a

distance of 95 metres between RR22-101 and RR22-102a. These broad and successful step outs

are external to the mineral resource estimate block model (

Figure 1-

Long Section

). Assay results

for drillholes RR22-102 and RR22-102a recently received from the laboratory are tabulated below:

DDH

From

(m)

To

(m)

Length

(m)

AuEq

g/t

Au g/t

Ag g/t

Pb %

Zn %

Zone

RR22-102

206.90

211.50

4.60

2.91

0.06

42.67

1.24

5.32

RRYZ

DDH

From

(m)

To (m)

Length

(m)

AuEq

g/t

Au g/t

Ag g/t

Pb %

Zn %

Zone

RR22-102a

206.60

210.15

3.55

4.54

0.06

54.25

1.66

9.01

RRYZ

RR22-102a

287.30

291.50

4.20

8.84

5.24

63.83

4.06

4.04

RRMZ

including

288.50

290.65

2.15

16.01

9.73

107.19

6.74

7.52

RRMZ

Footnote

1. Reported widths of mineralization are drill hole intervals or core lengths recovered. Insufficient data exists to permit the calculation of true width of the reported

mineralized intervals.

Footnote 2. Mineralized Zone abbreviations: RRMZ: Revel Ridge Main Zone, RRYZ: Revel Ridge Yellowjacket Zone.

Footnote 3. AuEq calculations use: Metal prices of Au US$1,625/oz, Ag US$22/oz, Pb US$0.95/lb, Zn US$1.20/lb; RRMZ process recoveries of Au 92%, Ag 88%, Pb 80%, Zn

72%; RRMZ AuEq = Au g/t + (Ag g/t x 0.012) + (Pb% x 0.347) + (Zn% x 0.353); RRYZ process recoveries of Au 91%, Ag 80%, Pb 74%, Zn 75%; RRYZ AuEq = Au g/t + (Ag g/t x

0.011) + (Pb% x 0.325) + (Zn% x 0.372).

John Mirko

, President and CEO, comments

"Drillhole RR22-102a bolsters the strength of the RRMZ

and the Yellowjacket Zone in the northwest extension and meets the primary goal of the summer

2022 drill campaign. Rokmaster has located a favourable geological setting hosting wide

intersections of RRMZ that is proving to be expansive.

Work is progressing well on the update to the PEA that will be incorporating both the 2021 mineral

resource estimate and the recent metallurgical break-through that demonstrably improves gold

recoveries."

The data from these drillholes will be combined with the Spring 2022 drill program and all of the

historical drill data to update the mineral resource estimation in 2023. Readers can view the

longitudinal section with the above drill results on Rokmaster's website at

rokmaster.com/projects/revel-ridge/maps-and-figures/

Quality Assurance/Quality Control.

Dr.

Jim Oliver

, P. Geo. supervised all aspects of the drilling

and sampling undertaken in the 2021 and 2022 underground and surface diamond drill programs. All

drill core assay samples have been collected from ½ NQ core, sawn with a diamond saw with the

sample intervals marked by technical personnel. A full QAQC program using blanks, standards and

duplicates was utilized to monitor analytical accuracy and precision. QAQC samples are submitted

approximately at every 20th sample, or a minimum of 5% of the total sample stream. Appropriate

standards are used to provide quality control information on high grade and medium to low grade

samples. A limestone blank is inserted after select samples that have macroscale characteristics of

higher-grade mineralization. Duplicate samples are repeat analysis of designated primary sample

pulps. The samples were sealed on site and shipped to MSALABS in

Langley, British Columbia

.

MSALABS is an ISO 17025 (Testing and Calibration Laboratory) and an ISO 9001 (Quality

Management System) Certified Laboratory. Drill core samples were crushed to 2 mm and a 500-

gram sub sample was pulverized with 85% of the sample passing 75 microns. The sub-sample was

analysed using a combination of MSALABS FAS211 for Au and ICP–240 (4 acid digestion) for silver,

base metals and other trace elements. FAS211 for gold is an ore grade fire assay of a 50 g pulp

with an AAS finish with a detection range between 0.01 and 100 ppm). ICP-240 utilizes four acid

digestion and provides ore grade analytical data on silver, base metals and 26 other elements.

The technical information in this news release has been prepared in accordance with Canadian

regulatory requirements as set out in National Instrument 43-101 and reviewed and approved by

Eric

Titley P.Geo

., who is independent of Rokmaster and who acts as Rokmaster's Qualified Person.

website:

www.rokmaster.com

On Behalf of the Board of Directors of

Rokmaster Resources Corp.

John Mirko

,

President & Chief Executive Officer.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term in defined in the

policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this

press release.

About Rokmaster

Rokmaster's flagship Revel Ridge Project is host to a high-grade gold and polymetallic orogenic

sulphide deposit which has been the subject of a PEA Technical Report dated

December 8, 2020

,

and a Technical Report of an Updated NI 43-101 Mineral Resource Estimate

1

on the Revel Ridge

Property, dated

January 17, 2022

. The 2022 drill programs are designed to efficiently expand the

volume of the Revel Ridge Main Zone as defined by the updated Mineral Resource Estimate, which

currently remains open in all directions:

Measured & Indicated (M&I):

1.36 million

gold equivalent ("AuEq") ounces contained within

6.73 million tonnes with an average grade of 6.27 g/t AuEq.

Inferred (Inf):

1.22 million

AuEq ounces contained within 6.00 million tonnes at an average

grade of 6.33 g/t AuEq.

Footnote 1. (Technical Report and Updated Mineral Resource Estimate of the Revel Ridge Polymetallic Property Revelstoke Mining Division, British Columbia, Canada, William

Stone, Ph.D., P.Geo. Fred Brown, P.Geo. Jarita Barry, P.Geo. David Burga, P.Geo. Eugene Puritch, P.Eng., FEC, CET Stacy Freudigmann, P.Eng. F.Aus.IMM. P&E Mining

Consultants Inc. Report 411 Effective Date: November 15, 2021 Signing Date: January 17, 2022 filed on SEDAR.)

CAUTIONARY NOTE REGARDING FORWARD LOOKING STATEMENTS: This news release may

contain forward-looking information within the meaning of applicable securities laws ("forward-

looking statements"). Forward-looking statements are statements that are not historical facts and

are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes,"

"intends," "estimates," 'projects," "potential" and similar expressions, or that events or conditions

"will," "would," "may," "could" or "should" occur. These forward-looking statements are subject to a

variety of risks and uncertainties which could cause actual events or results to differ materially from

those reflected in the forward-looking statements, including, without limitation: risks related to

fluctuations in metal prices; uncertainties related to raising sufficient financing to fund the planned

work in a timely manner and on acceptable terms; changes in planned work resulting from weather,

logistical, technical or other factors; the possibility that results of work will not fulfill expectations and

realize the perceived potential of the Company's properties; risk of accidents, equipment

breakdowns and labour disputes or other unanticipated difficulties or interruptions; the possibility of

cost overruns or unanticipated expenses in the work program; the risk of environmental

contamination or damage resulting from Rokmaster's operations and other risks and uncertainties.

Any forward-looking statement speaks only as of the date it is made and, except as may be

required by applicable securities laws, the Company disclaims any intent or obligation to update any

forward-looking statement, whether as a result of new information, future vents or results or

otherwise.

SOURCE

Rokmaster Resources Corp.

View original content to download multimedia:

http://www.newswire.ca/en/releases/archive/November2022/28/c6793.html

%SEDAR: 00031923E

For further information:

Mr. John Mirko, President & CEO of Rokmaster Resources Corp.,

[email protected], Ph. 1-604-290-4647 or by website: www.rokmaster.com; For shareholder

information please contact: Mike Kordysz, [email protected], Ph. +1 (604) 319-3171

CO: Rokmaster Resources Corp.

CNW 05:00e 28-NOV-22