REG.V · 2019-01-30 12:00:00

REGULUS EXTENDS HIGH GRADE COPPER-GOLD MINERALIZATION TO THE NORTH AT THE ANTAKORI PROJECT, PERU 473.2 metres with 1.16% Cu, 0.21 g/t Au and 8.4 g/t Ag (1.39% CuEq) including 88.0 metres with 1.50% Cu, 0.38 g/t Au and 19.3 g/t Ag (1.95% CuEq)

Drill Results

REGULUS EXTENDS HIGH GRADE COPPER-GOLD MINERALIZATION

TO THE NORTH AT THE ANTAKORI PROJECT, PERU

473.2 metres with 1.16% Cu, 0.21 g/t Au and 8.4 g/t Ag (1.39% CuEq)

including

88.0 metres with 1.50% Cu, 0.38 g/t Au and 19.3 g/t Ag (1.95% CuEq)

and

51.8 metres with 1.95% Cu, 0.49 g/t Au and 12.6 g/t Ag (2.41% CuEq)

in hole AK-18-026; preceded by upper zone in same hole of

236.35 metres with 0.53% Cu, 0.63 g/t Au and 12.1 g/t Ag (1.09% CuEq)

including

33.95 metres with 2.46% Cu, 3.02 g/t Au and 37.9 g/t Ag (4.96% CuEq)

January 30, 2019, (Vancouver, BC) – Regulus Resources Inc. ("Regulus" or the "Company", REG TSX.V) is

pleased to announce the results from six additional drill holes at the Company’s AntaKori copper-gold-silver project

in northern Peru. The drilling campaign is underway in collaboration with Compañía Minera Coimolache S.A.

(“Coimolache” or “CMC”), the operator of the Tantahuatay gold mine immediately to the south of the AntaKori

project. Holes reported in this news release are AK-18-022 through AK-18-027 (see Figure 1). Results are only

reported herein for the portions of the drill holes that occur within Regulus concessions. All of the holes encountered

significant mineralization with the most notable results from hole AK-18-026 along the northern margin of drilling

completed to date.

Highlights from drill holes AK-18-022 through AK-18-027 – AntaKori Project:

• AK-18-026:

o 236.35 m with 0.53% Cu, 0.63 g/t Au and 12.09 g/t Ag (1.09% CuEq) from 87.55 m depth

including

o 33.96 m with 2.46% Cu, 3.02 g/t Au and 37.92 g/t Ag (4.96% CuEq) from 153.15 m depth

o Both high-sulphidation epithermal and skarn with overprint of carbonate base metal

intermediate sulphidation veining

and

o 145.10 m with 0.35% Cu, 0.14 g/t Au and 10.17 g/t Ag (0.54% CuEq) from 351.30 m depth

o Skarn mineralization

and

o 473.20 m with 1.16% Cu, 0.21 g/t Au and 8.43 g/t Ag (1.39% CuEq) from 640.50 m depth

including

o 88.00 m with 1.50% Cu, 0.38 g/t Au and 19.32 g/t Ag (1.95% CuEq) from 647.00 m depth

and

o 51.80 m with 1.95% Cu, 0.49 g/t Au and 12.61 g/t Ag (2.41% CuEq) from 762.30 m depth

and

o 42.10 m with 2.24% Cu, 0.15 g/t Au and 5.13 g/t Ag (2.39% CuEq) from 890.40 m depth

and

o 55.55 m with 1.93% Cu, 0.09 g/t Au and 4.12 g/t Ag (2.04% CuEq) from 968.00 m depth

o Well developed breccia in Farrat Formation quarzite that is cemented by pyrite, chalcopyrite,

bornite, chalcocite and magnetite with minor late infilling of enargite and tennantite. The

orientation of the breccia body is currently undetermined. This is the most significant

occurrence of bornite encountered to date at the project.

• AK-18-027:

o 344.9 m with 0.30% Cu, 0.16 g/t Au and 7.89 g/t Ag (0.49% CuEq) from 266.90 m depth

o Predominantly as skarn

and

o 160.65 m with 0.29% Cu, 0.12 g/t Au and 1.22 g/t Ag (0.39% CuEq) from 764.65 m depth

o Zone of abundant porphyry dikes cutting skarn and quartzite

• AK-18-025:

o 514.85 m with 0.27% Cu, 0.37 g/t Au and 10.78 g/t Ag (0.63% CuEq) from 104.80 m depth

o Drilled from same platform as AK-18-026 and AK-18-023 but oriented to north

o Mineralization is predominanty as skarn in underlying Cretaceous sedimentary sequence

• AK-18-024:

o 601.09 m with 0.35% Cu, 0.17 g/t Au and 5.22 g/t Ag (0.51% CuEq) from 68.38 m depth

and

o 120.50 m with 0.43% Cu, 0.10 g/t Au and 2.62 g/t Ag (0.52% CuEq) from 768.65 m depth

o The upper interval is predominantly skarn but the lower interval is hosted in brecciated

Farrat Formation quartzites with notably higher copper grades associated with pyrite-

chalcopyrite-bornite as fracture filling and breccia matrix.

• AK-18-023:

o 270.91 m with 0.18% Cu, 0.22 g/t Au and 8.92 g/t Ag (0.42% CuEq) from 104.19 m depth

and

o 86.60 m with 0.23% Cu, 0.11 g/t Au and 4.03 g/t Ag (0.34% CuEq) from 415.50 m depth

o Drilled from same platform as AK-18-026 but at a more shallow angle to the north

o Hole was lost prior to full target depth due to difficult drilling conditions

• AK-18-022:

o 332.67 m with 0.35% Cu, 0.34 g/t Au and 7.68 g/t Ag (0.66% CuEq) from 119.63 m depth

including

o 71.66 m with 0.76% Cu, 0.91 g/t Au and 8.94 g/t Ag (1.50% CuEq) from 178.74 m depth

further including

o 13.50 m with 1.63% Cu, 2.44 g/t Au and 21.21 g/t Ag (3.56% CuEq) from 221.50 m depth

o High-sulphidation style mineralization in Miocene volcanic sequence to a depth of 252.60 m

with low to moderate grade skarn below

John Black, Chief Executive Officer of Regulus, commented as follows: “The AntaKori project continues to

consistently deliver encouraging drill results and we are particularly pleased with the new zone of breccia-hosted

high grade copper mineralization in AK-18-026. This batch of drill holes concludes our Phase 1 drilling program

with a total of 20,332 m drilled on Regulus concessions. The results from the Phase 1 program will form the basis for

the completion of an updated NI 43-101 mineral resource estimate that is progressing well and scheduled for

completion by the end of February. Drilling has continued directly into a Phase 2 program and we will drill with 2

rigs until the end of the wet season in approximately April at which time we will increase the rig count to allow for

the completion of approximately 25,000 m of additional drilling in 2019.”

Dr. Kevin B. Heather, Chief Geological Officer of Regulus, commented as follows: “The final results from our

Phase 1 drill program at Antakori have highlighted two important factors: (1) All 27 holes of the program intercepted

mineralized rock which considering the size and scope of our drill program is a testament to the size of the AntaKori

system, and (2) I’m particularly excited by the first occurrence of significant amounts of breccia-hosted bornite with

chalcopyrite within a significant high grade copper interval in hole AK-18-26 (suggesting that we are approaching

the core of the system). AK-18-026 is the furthest northward hole drilled in this campaign and the first hole to test the

southern margin of a distinct magnetic low that may be associated with an intrusive center. Our Phase 2 drill program

will continue to test the northern extension of the system which we believe will lead us to the core of this extremely

large system.”

The AntaKori system hosts two principal styles of copper-gold-silver sulphide mineralization: 1) mineralized skarn

and breccias (Cu-Au-Ag) within Cretaceous calcareous sedimentary rocks, likely associated with as-yet undiscovered

porphyry mineralization; and 2) younger, epithermal high-sulphidation (HS) mineralization (Cu-Au-Ag-As) in

overlying Miocene volcanic rocks and breccias that host the adjacent Tantahuatay heap-leach gold mine to the south.

The younger high-sulphidation mineralization is characterized by pyrite-enargite and locally overprints the earlier

skarn mineralization (pyrite-chalcopyrite-magnetite), particularly along the southern part of the AntaKori system. Drill

holes at AntaKori typically encounter the overlying Miocene volcanic rocks and high-sulphidation style mineralization

prior to entering the Cretaceous sedimentary sequence and skarn at depth. As the drilling progresses to the north, the

volcanic rocks terminate, and drill holes will commence directly in the skarn/porphyry environment within the

Cretaceous sedimentary sequence (see Figures 2-5).

AK-18-022 through AK-18-027 were collared to test Regulus mineral concessions, within or near to the footprint of

the currently reported AntaKori NI 43-101 inferred mineral resource of 294.8 million tonnes with 0.48% Cu, 0.36 g/t

Au and 10.2 g/t Ag (see Southern Legacy news release of July 3rd, 2012; Wilson, 2012 – posted to SEDAR under

Southern Legacy Minerals on August 21, 2012 ), to confirm and extend the known, but only partially delineated

resource.

Discussion of results

Table 1 below provides more details regarding the mineralized intercepts encountered in drill holes AK-18-022 to

AK-18-027. The locations of the reported drill holes are indicated on Figure 1. The design of the current drilling

program is for holes spaced on approximately 150 m centres along drill sections oriented at 045 degrees (SW-NE).

Drill Holes AK-18-027 and AK-18-024 were drilled from the same platform but in opposite directions on section

line 1050NW (see figure 4). Both holes tested an upper zone of Miocene volcanic rocks with associated high -

supphidation epithermal mineraliztion before entering into skarn mineralization at depths of 260-300m. The holes

terminated in quartzite which is normally a poor host at AntaKori but in hole AK-18-024 the quartzite is brecciated

and locally well-mineralized.

Drill holes AK-18-026, AK-18-025, and AK-18-023 were all drilled from the same platform as previously reported

drill hole AK-18-020 (see Regulus news release of November 14, 2018). These holes complete a fan of holes on

section 950NW (see figures 3 and 5) and represent the northernmost drilling completed to date in this drill program.

The holes encountered a thin zone of Miocene volcanic rocks to depths of 140-170 m prior to entering into skarn

mineralization within the underlying Cretaceous sedimentary sequence. Hole AK-18-023 failed to reach target depth

but hole AK-18-026 was completed to target depth and extended deeper when a well mineralized breccia body was

encountered. The breccia is developed in Farrat Formation quartzite and is cemented by pyrite-chalcopyrite-bornite-

chalcocite with minor late infilling of enargite-tennantite. This is the most significant occurrence of bornite

encountered at AntaKori to date. The geometry of the breccias body is very poorly constrained at this time as this is

the only hole in which it has been intersected. The breccia varies in degree of development with blocks of less

brecciated quartzite preserved within the overall body. The well brecciated portions of the body show long runs with

copper mineralization consistently in the 1-4% range. The late infilling of enargite-tennantite mineralization results

in moderate levels of arsenic (see Table 2 for results) that are less that what occurs in the high -sulphidation

mineralization within the overlying Miocene volcanic sequence but higher than skarn mineralization in the Cretaceous

carbonate rocks.

All three of these holes show local evidence of the late base metal carbonate style of mineralization that was previously

reported from drill hole AK-18-020. This younger mineralization event occurs as irregular veins that overprint skarn

mineralization and are locally incorporated as fragments in late breccias. It is probably more closely related in age,

but younger than, the high-sulphidation epithermal mineralization in the overlying Miocene volcanic rocks and is

characterized by high gold-silver contents, elevated zinc-lead, and lower arsenic than the high-sulphidation epithermal

mineralization. Individual assay intervals can have very high grades with several intervals exceeding 10 g/t Au in

holes AK-18-025 and AK-18-026. Individual assay intervals in hole AK-18-025 contain up to 27.7 g/t Au over an

interval of 1.6m. Individual assays in hole AK-18-026 contain up to 28.4 g/t Au and 17.33% Cu over an interval of

0.9m. These high grade intervals are generally enclosed within broader zones of well mineralized rock. The following

tables show the zones of higher grade mineralization with results from individual samples cut to 10% Cu, 10 g/t Au,

1000 g/t Ag and also to 5% Cu, 5 g/t Au, 500 g/t Ag to help evaluate the influence of the higher grade samples.

AK-18-025 25.70 m from 325.45-351.15 m Cu % Au g/t Ag/t

Uncut values 0.97 3.83 26.56

Cut to 10% Cu, 10 g/t Au, 1000 g/t Ag 0.97 1.93 26.56

Cut to 5% Cu, 5 g/t Au, 500 g/t Ag 0.85 1.31 26.56

AK-18-026 33.95 m from 153.15-187.10 m Cu % Au g/t Ag/t

Uncut values 2.46 3.02 37.92

Cut to 10% Cu, 10 g/t Au, 1000 g/t Ag 2.22 2.42 37.92

Cut to 5% Cu, 5 g/t Au, 500 g/t Ag 1.75 2.05 37.92

Drill hole AK-18-022 is located on section L500NW (see figure 2) and tested the eastern margin of the currently

defined mineralization at AntaKori. The hole encountered high-sulphidation mineralization in Miocene volcanic rocks

to a depth of 252.6 m prior to entering skarn mineralization in the underlying Cretaceous sequence (see tables 1 and

2 for summary of mineralized intervals). At the base of the Miocence volcanic sequence there is a zone of higher grade

mineralization from 232.20-250.40m with several individual assay intervals that exceed 5 g/t Au and/or 5% Cu with

grades up to 9.44 g/t Au and 6.22% Cu. The following table shows the assay results from this interval with results

from individual samples cut to 10% Cu, 10 g/t Au, 1000 g/t Ag and also to 5% Cu, 5 g/t Au, 500 g/t Ag to help evaluate

the influence of the higher-grade samples.

AK-18-022 18.20 m from 232.2-250.4 m Cu % Au g/t Ag/t

Uncut values 1.95 1.61 16.64

Cut to 10% Cu, 10 g/t Au, 1000 g/t Ag 1.95 1.61 16.64

Cut to 5% Cu, 5 g/t Au, 500 g/t Ag 1.77 1.10 16.64

Figures 2-5 show representative geologic cross sections of for holes AK-18-022 through AK-18-027. Additional

sections for the other holes reported here and from previously reported holes can be found on the Regulus website:

www.regulusresources.com.

Table 1. AntaKori Holes AK-18-022 Through AK-18-027 Results

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

g/t

Silver

g/t

Cu Eq

Au Eq

g/t

AK-18-027 21.00 29.06 8.06 1.65 0.35 3.13 1.92 2.70

59.72 127.88 68.16 0.37 0.09 2.09 0.45 0.63

266.90 611.83 344.93 0.30 0.16 7.89 0.49 0.68

including 279.15 310.70 31.55 0.52 0.24 22.56 0.89 1.25

and 577.87 591.79 13.92 0.54 0.25 20.24 0.90 1.27

764.65 925.30 160.65 0.29 0.12 1.22 0.39 0.54

961.74 985.20 23.46 0.20 0.07 0.38 0.25 0.35

Total depth 991.03

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

g/t

Silver

g/t

Cu Eq

Au Eq

g/t

AK-18-026 0.00 46.17 Not within Regulus Concessions - not reportable by Regulus

87.55 323.90 236.35 0.53 0.63 12.09 1.09 1.53

including 153.15 187.11 33.96 2.46 3.02 37.92 4.96 6.95

351.30 496.40 145.10 0.35 0.14 10.17 0.54 0.76

including 382.70 389.00 6.30 3.18 0.36 128.80 4.61 6.46

640.50 1113.70 473.20 1.16 0.21 8.43 1.39 1.95

including 647.00 735.00 88.00 1.50 0.38 19.32 1.95 2.73

and 762.30 814.10 51.80 1.95 0.49 12.61 2.41 3.38

and 829.90 856.05 26.15 1.44 0.28 15.27 1.78 2.49

and 890.40 932.50 42.10 2.24 0.15 5.13 2.39 3.35

and 968.00 1023.55 55.55 1.93 0.09 4.12 2.04 2.86

1147.20 1163.20 16.00 0.25 0.04 1.02 0.29 0.41

Total depth 1302.30

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

g/t

Silver

g/t

Cu Eq

Au Eq

g/t

AK-18-025 0.00 32.13 Not within Regulus Concessions - not reportable by Regulus

104.80 619.65 514.85 0.27 0.37 10.78 0.63 0.88

including 192.55 215.95 23.40 0.59 0.31 13.61 0.94 1.32

and 325.45 351.15 25.70 0.97 3.83 26.56 3.95 5.53

Total depth 619.65

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

g/t

Silver

g/t

Cu Eq

Au Eq

g/t

AK-18-024 68.38 669.47 601.09 0.35 0.17 5.22 0.51 0.72

including 192.90 235.80 42.90 0.75 0.12 4.14 0.88 1.23

and 275.05 316.10 41.05 0.59 0.30 14.65 0.94 1.32

768.65 889.15 120.50 0.43 0.10 2.62 0.52 0.73

including 819.85 884.20 64.35 0.60 0.12 3.70 0.71 1.00

931.76 938.00 6.24 3.59 1.60 241.01 6.93 9.71

Total depth 998.91

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

g/t

Silver

g/t

Cu Eq

Au Eq

g/t

AK-18-023 0.00 24.58 Not within Regulus Concessions - not reportable by Regulus

104.19 375.10 270.91 0.18 0.22 8.92 0.42 0.59

including 150.05 258.05 108.00 0.20 0.34 11.20 0.55 0.77

415.50 502.10 86.60 0.23 0.11 4.03 0.34 0.48

Total depth 549.10 hole lost due to difficult ground conditions

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

g/t

Silver

g/t

Cu Eq

Au Eq

g/t

AK-18-022 11.16 92.53 81.37 0.33 0.16 2.88 0.46 0.65

119.63 452.30 332.67 0.35 0.34 7.68 0.66 0.92

including 178.74 250.40 71.66 0.76 0.91 8.94 1.50 2.10

which includes 221.50 235.00 13.50 1.63 2.44 21.21 3.56 4.99

Total depth 454.79 hole lost due to difficult ground conditions

The grades are uncut. Cu Eq and Au Eq values were calculated using copper, gold and silver. Metal prices utilized for the calculations are Cu – US$2.25/lb,

Au – US$1,100/oz, and Ag – US$14/oz. All intervals presented above consist of sulphide mineralization. No adjustments were made for recovery as the

project is an early stage exploration project and metallurgical data to allow for estimation of recoveries is not yet available. The formulas utilized to calculate

equivalent values are Cu Eq (%) = Cu% + (Au g/t * 0.7130) + (Ag g/t * 0.0091) and Au Eq (g/t) = Au g/t + (Cu% * 1.4026) + (Ag g/t * 0.0127).

Table 2. AntaKori Holes AK-18-017 Through AK-18-021

Results presented by Lithology/Alteration Style.

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

Silver

Zinc

ppm

AK-18-027

Miocene Volcanic (HS) 21.00 29.06 8.06 1.65 0.35 3.13 0.01 5893

Miocene Volcanic (HS) 59.72 127.88 68.16 0.37 0.09 2.09 0.00 1119

Breccia 266.90 301.80 34.90 0.88 0.21 16.62 0.26 6472

Skarn 301.80 611.83 310.03 0.24 0.15 6.91 0.22 192

Skarn 577.87 591.79 13.92 0.54 0.25 20.24 0.10 41

Skarn/porphyry dikes 764.65 811.80 47.15 0.29 0.16 1.21 0.01 81

porphyry dikes/qtzte 811.80 925.30 113.50 0.28 0.11 1.22 0.00 221

porphyry dikes 961.74 985.20 23.46 0.20 0.07 0.38 0.00 28

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

Silver

Zinc

ppm

AK-18-026

Miocene Volcanic (HS) 87.55 171.30 83.75 0.42 0.70 12.23 0.32 584

Skarn 171.30 323.90 152.60 0.59 0.60 12.02 0.41 180

CBM veins 153.15 187.11 33.96 2.46 3.02 37.92 0.40 441

Skarn 351.30 496.40 145.10 0.35 0.14 10.17 0.20 213

Skarn 382.70 389.00 6.30 3.18 0.36 128.80 3.15 48

Breccia/Quartzite 640.50 1113.70 473.20 1.16 0.21 8.43 0.05 909

Breccia 647.00 735.00 88.00 1.50 0.38 19.32 0.08 2090

Breccia 762.30 814.10 51.80 1.95 0.49 12.61 0.02 730

Breccia 829.90 856.05 26.15 1.44 0.28 15.27 0.12 1643

Breccia 890.40 932.50 42.10 2.24 0.15 5.13 0.01 824

Breccia 968.00 1023.55 55.55 1.93 0.09 4.12 0.00 467

Breccia/Quartzite 1147.20 1163.20 16.00 0.25 0.04 1.02 0.00 265

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

Silver

Zinc

ppm

AK-18-025

Miocene Volcanic (HS) 104.80 190.65 85.85 0.15 0.34 15.61 0.22 291

Skarn/breccia 190.65 619.65 429.00 0.37 0.29 9.81 0.22 261

Skarn/breccia 325.45 351.15 25.70 0.97 3.83 26.56 0.35 1194

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

Silver

Zinc

ppm

AK-18-024

Miocene Volcanic (HS) 68.38 260.40 192.02 0.41 0.13 3.42 0.01 1144

Miocene Volcanic (HS) 192.90 235.80 42.90 0.75 0.12 4.14 0.00 2298

Skarn 260.20 669.47 409.27 0.32 0.18 6.06 0.16 128

Skarn 275.05 316.10 41.05 0.59 0.30 14.65 0.41 212

Quartzite 768.65 889.15 120.50 0.43 0.10 2.62 0.00 441

Quartzite 819.85 884.20 64.35 0.60 0.12 3.70 0.01 580

Quartzite 931.76 938.00 6.24 3.59 1.60 241.01 0.32 8860

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

Silver

Zinc

ppm

AK-18-023

Miocene Volcanic (HS) 104.19 172.38 68.19 0.13 0.21 8.27 0.28 246

Skarn 172.38 375.10 202.72 0.20 0.23 9.14 0.55 198

Skarn 415.50 502.10 86.60 0.23 0.11 4.03 0.18 91

Drill Hole ID From

(m)

Length

(m)

Copper

Gold

Silver

Zinc

ppm

AK-18-022

Miocene Volcanic (HS) 11.16 92.53 81.37 0.33 0.16 2.88 0.01 834

Miocene Volcanic (HS) 119.63 252.60 132.97 0.50 0.59 7.93 0.08 1718

Miocene Volcanic (HS) 178.74 250.40 71.66 0.76 0.91 8.94 0.11 2536

Miocene Volcanic (HS) 221.50 235.00 13.50 1.63 2.44 21.21 0.03 5292

Skarn 252.60 452.30 199.70 0.24 0.16 8.84 0.18 245

The grades are uncut. HS = high-sulphidation epithermal style mineralisation. CBM = carbonate-base metal style epithermal mineralization.

This table reports the mineralized intervals based upon lithology and demonstrates the notable difference in arsenic content between high-

sulphidation mineralization in the Miocene volcanic sequence (typically 1000-5000 ppm As) and the lower concentrations found in the zones

of skarn mineralization (typically 100-400 ppm As).

The true widths of the mineralized intervals reported in Tables 1 and 2 are difficult to ascertain and additional drilling

and geologic modelling will be required to better constrain the geometry of the mineralized zones. High-sulphidation

epithermal mineralization within the Miocene volcanic sequence is characterized by exten sive zones of low to

moderate-grade disseminated and fracture-controlled mineralization that enclose zones of higher grade mineralization

like that encountered in holes AK-18-001 and AK-18-021 as well as several other drill holes. These higher grade

zones consist of irregular pyrite-enargite veins, veinlets, and open space infilling that exhibit both a subvertical

structural control and a subhorizontal permeability or manto control within the volcanic sequence. The margins of the

higher grade high-sulphidation epithermal zones are generally not sharp or planar in nature. Skarn style mineralization

in the Cretaceous sedimentary sequence is m ainly controlled by the subhorizontal stratigraphy and reported

mineralized intercepts are probably close to true thicknesses as the drill holes are steeply inclined at 60-90 degrees. In

addition to high-sulphidation epithermal and skarn styles of mineralization the project also exhibits zones of irregular

veins and veinlets of chalcopyrite-pyrite-anhydrite-quartz that are thought to be more typical of porphyry copper style

mineralization and likely occurring as broad zones of stockwork veining rather than distinct veins. This latter style of

mineralization typically overprints skarn mineralization and increases the overal l grade. Mineralization at the

AntaKori deposit also occurs within breccias as both mineralized fragments (post-mineral breccias) or as infilling of

voids within the breccia (pre-mineral breccias). Mineralization within breccias tends to be irregular but the majority

of the breccias bodies are subvertical and planar in nature.

Sampling and Analytical Procedures

Regulus follows systematic and rigorous sampling and analytical protocols which meet and exceed industry standards.

These protocols are summarized below and are available on the Regulus website at www.regulusresources.com.

All drill holes are diamond core holes with PQ, HQ or NQ core diameters. Drill core is collected at the drill site where

recovery and RQD (Rock Quality Designation) measurements are taken before the core is transported by truck to the

Regulus core logging facility in Cajamarca, where it is photographed and geologically logged. The core is then cut in

half with a diamond saw blade with half the sample retained in the core box for future reference and the other half

placed into a pre-labelled plastic bag, sealed with a plastic zip tie, and identified with a unique sample number. The

core is typically sampled over a 1 to 2 metre sample interval unless the geologist determines the presence of an

important geological contact. The bagged samples are then stored in a secure area pending shipment to a certified

laboratory sample preparation facility. Samples are sent by batch to the ALS laboratory in Lima for assay. Regulus

independently inserts certified control standards, coarse field blanks, and duplicates into the sample stream to monitor

data quality. These standards are inserted “blindly” to the laboratory in the sample sequence prior to departure from

the Regulus core storage facilities. At the laboratory samples are dried, crushed, and pulverized and then analyzed

using a fire assay – AA finish analysis for gold and a full multi-acid digestion with ICP-AES analysis for other

elements. Samples with results that exceed maximum detection values for gold are re-analyzed by fire assay with a

gravimetric finish and other elements of interest are re-analyzed using precise ore-grade ICP analytical techniques.

For Further Information, please contact:

Regulus Resources Inc.

John E. Black, CEO / Director

Phone: +1 303 618-7797 mobile

+1 720 514-9036 office

Email: [email protected]

About Regulus Resources Inc. and the AntaKori Project

Regulus Resources Inc. is an international mineral exploration company run by an experienced technical and

management team, with a portfolio of precious and base metal exploration properties located in North and South

America. The principal project held by Regulus is the AntaKori copper-gold-silver project in northern Peru. The

AntaKori project currently hosts an inferred mineral resource of 294.8 million tonnes with a grade of 0.48% Cu, 0.36

g/t Au and 10.2 g/t Ag based upon 17,950 m of drilling by previous operators (see Southern Legacy Minerals press

release of July 3rd, 2012 - Southern Legacy Minerals and the Company entered into a business arrangement in 2014

and kept the name Regulus Resources Inc.). Mineralization remains open in most directions and drilling is currently

underway to confirm and increase the size of the resource.

For further information on Regulus Resources Inc., please consult our website at www.regulusresources.com

Qualified Person

← Back to feed