Radius intersects 26.9m at 353 g/t Silver and 2.59 g/t Gold in first drill results from California target, Amalia Project, Mexico
news release
October 25, 2021
Radius intersects 26.9m at 353 g/t Silver and 2.59 g/t Gold in first drill results
from California target, Amalia Project, Mexico
Vancouver, British Columbia – Radius Gold Inc. (TSXV:RDU) is pleased to announce that high grade gold
and silver has been intersected in multiple drill holes in the first phase of drilling at the California target,
Amalia Project, Mexico. Radius’s joint venture partner, Pan American Silver Corp. (PAS), is the project
operator and is fully funding the program.
3814m of diamond core drilling in 14 drill holes has been completed at the California target on 5 sections
spaced 200m apart, defining a new mineralized system across a strike length of 1km. Results have been
received for the first 10 drill holes and gold-silver mineralization has been intersected in every hole.
California drill highlights include:
AMDD21-32 27.3m @ 90 g/t Ag and 0.26 g/t Au
AMDD21-34 3.95m @ 487 g/t Ag and 2.15 g/t Au
AMDD21-36 1.75m @ 578 g/t Ag and 0.27 g/t Au
AMDD21-38 11.2m @ 379 g/t Ag and 1.26 g/t Au
AMDD21-39 26.9m @ 353 g/t Ag and 2.59 g/t Au
The first target on the Amalia fault delivered bonanza grade discovery holes at San Pedro with AMDD18-
009 (26m at 7.08g/t Au and 517 g/t Ag, press release Dec 4 2018) and AMDD19-010 (44m grading 12.38
g/t Au and 309 g/t Ag , press release May 1 2019 ). The San Pedro target was systematically drilled
defining a gold-silver mineralized shoot to 450m depth below outcrop, before PAS moved to California
(Figure 1, Figure 2).
At California the initial shallow drilling has intersected multi-phase breccias and stock-work vein systems
with significant widths (up to 50m), strike length (+1km) and high grades (individual samples maximum
values to 4210 g/t Ag and 33.1 g/t Au).
The California vein breccia system has been mapped for 2. 8km with initial drill testing limited to 1km
where access is easiest (Figure 3). California lies parallel to the Amalia vein system 1.4km NE and at an
elevation 450masl higher. The host rock at California is domina ntly rhyolite and dacite flows and the
host rock of the Amalia vein is dominantly rhyo lite tuffs. The host rock relationship indicates that
-2-
California is potentially closer to the mineralizing source, and the 450m elevation difference indicates
potential for significant depth expansion . The California system is open in all directions and has great
potential.
At the 3rd major breccia and vein target, El Cuervo, drill testing has commenced. El Cuervo is located
between the Amalia and California systems. It was once thought to be a strike extension of the Amalia
fault, but recent mapping indicates a separate parallel system of silicification, stockwork veining and
brecciation up to 40m wide that has been defined semi -continuously for 1.5km, with surface rock chip
samples that range from below detection to 637 g/t Ag and 2.24 g/t Au. PAS has initiated a helicopter
supported drill program and expects to complete 3500m of diamond drilling before Christmas.
Bruce Smith, Radius CEO, comments, “The new results from California are a compelling demonstration
of the potential of the Amalia project. I am proud of Radius’s team for identifying the project, compiling
a large 10,250ha regional land package, prospecting very tough terrain and defining multiple drill targets.
Our joint venture partner Pan American’s systematic approach , highly skilled team and financial
resources has produced high-grade gold-silver results at Amalia and now another set of compelling
results from the California system. With helicopter supported drilling commencing at El Cuervo and a
long list of other targets yet to be drill tested, Amalia is developing into a great project that has potential
to produce many new discovery zones.”
Figure 1. Radius Gold’s Amalia Project.
-3-
Figure 2. Amalia project target summary map.
-4-
Figure 3. California target – Drilling progress
-5-
Figure 4. California Drill Sections: AMDD21-038 to AMDD21-40
-6-
Table 1. California full table of diamond drill results:
Note: The published drill intersects are drilled width not true widths. True widths are estimated between 80 and
90% drilled width. A complete set of cross sections from California will be available on the Company’s website.
-7-
The Agreement
Pursuant to an option agreement signed in June 2018, Pan American Silver Corp. has the option to earn
up to an initial 65% interest in the Amalia Project by making cash payments to Radius totalling US$1.5
million (of which US$ 800,000 has been received) and expending US$2 million on exploration over four
years. Pan American may earn an additional 10% by advancing the property to preliminary-feasibility.
Quality Assurance and Quality Control
Drilling is carried out using NQ and HQ size tooling. Drill core is cut in half using a rock saw with one-half
of the core then taken as a sample for analysis. Sample intervals are generally 1m intervals, producing
samples of between 2 to 9 kg. Half-core samples are delivered to the ALS Geochemistry laboratory
facilities in Chihuahua, Mexico. The samples are fire assayed for Au and are analysed for Ag and multi -
elements using method code ME-ICP61 following a four-acid digestion. Overlimits are analysed using an
appropriate method. Multi-element geochemical standards and blanks are routinely entered into the drill
core sample stream to monitor laboratory performance. Quality control samples submitted to ALS were
returned within acceptable limits.
Technical Information
Bruce Smith, M.Sc. (Geology), a member of the Australian Institute of Geoscientists, is Radius’s Qualified
Person as defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects. Mr. Smith
has reviewed and approved the technical information contained in this news release.
Radius Gold Inc.
Radius has a portfolio of projects located in Mexico, United States and Guatemala which it continues to
advance, utilizing partnerships where appropriate in order to retain the Company’s strong treasury. At
the same time, management is seeking out additional investment and project acquisition opportunities
across the globe.
ON BEHALF OF THE BOARD
Bruce Smith
President and CEO
Symbol: TSXV-RDU
Contact: Bruce Smith
200 Burrard Street, Suite 650
Vancouver, BC V6C 3L6
Tel: 604-801-5432; Toll free 1-888-627-9378; Fax: 604-662-8829
Email: [email protected]
Website: www.radiusgold.com
Neither the TSX Venture Exchange nor the Investment Industry Regulatory Organization of Canada accepts
responsibility for the adequacy or accuracy of this release.
-8-
Forward-looking statements
Certain statements contained in this news release constitute forward -looking statements within the meaning of
Canadian securities legislation. All statements included herein, other than statements of historical fact, are forward-
looking statements and include, without limitation, statements about the results of exploration work and future
plans at the Amalia Project. Often, but not always, these forward looking statements can be identified by the use of
words such as “estimate”, “estimates”, “estimated”, “potential”, “open”, “future”, “assumed”, “projected”, “used”,
“detailed”, “has been”, “gain”, “upgraded”, “offset”, “limited”, “contain ed”, “reflecting”, “containing”,
“remaining”, “to be”, “periodically”, or statements that events, “could” or “should” occur or be achieved and similar
expressions, including negative variations.
Forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause
the actual results, performance or achievements of the Company to be materially different from any results,
performance or achievements expressed or implied by forward -looking statements. Such uncertainties and factors
include, among others, whether the planned exploration work at Amalia will proceed as intended; changes in
general economic conditions and financ ial markets; the Company or any joint venture partner not having the
financial ability to meet its exploration and development goals; risks associated with the results of exploration and
development activities, estimation of mineral resources and the geolo gy, grade and continuity of mineral deposits;
unanticipated costs and expenses; and such other risks detailed from time to time in the Company’s quarterly and
annual filings with securities regulators and available under the Company’s profile on SEDAR at www.sedar.com.
Although the Company has attempted to identify important factors that could cause actual actions, events or results
to differ materially from those described in forward -looking statements, there may be other factors that cause
actions, events or results to differ from those anticipated, estimated or intended.
Forward-looking statements contained herein are based on the assumptions, beliefs, expectations and opinions of
management, including but not limited to: that the exploration work at the Amalia Project will advance as planned ;
that the Company’s stated goals and the planned exploration and development activities at its properties will be
achieved; that there will be no material adverse change affecting the Company or its properties; and such other
assumptions as set out herein. Forward -looking statements are made as of the date hereof and the Company
disclaims any obligation to update any forward-looking statements, whether as a result of new information, future
events or results or otherwise, except as required by law. There can be no assurance that forward -looking
statements will prove to be accurate, as actual results and future events could differ materially from those anticipated
in such statements. Accordingly, investors should not place undue reliance on forward -looking statements.