ARYA RESOURCES INTERSECTS 3.86 g/t GOLD (Au) over 44.0 m at TWIN ZONE, including 9.90 g/t Au over 16.0 m and 26.14 g/t Au over 3.80 m, WEDGE LAKE GOLD PROJECT, SASKATCHEWAN
ARYA RESOURCES INTERSECTS 3.86 g/t GOLD (Au) over 44.0 m at TWIN
ZONE, including 9.90 g/t Au over 16.0 m and 26.14 g/t Au over 3.80 m,
WEDGE LAKE GOLD PROJECT, SASKATCHEWAN
Vancouver, British Columbia – November 03, 2025 – Arya Resources Ltd. (TSXV: RBZ) (“Arya” or
the “Company”) is pleased to report gold-only assay results from three drill holes completed at
the Twin Zone , Wedge Lake Gold Project, located in Saskatchewan’s La Ronge Gold Belt. These
results follow the Company’s previously announced high-grade intercept of 21.59 g/t Au over
5.84 m including 30.45 g/t Au over 4.06 m from the nearby T-6 Zone (see press release dated
October 20, 2025).
Twin Zone Drill Highlights
AR25-09:
• 3.86 g/t Au over 44.0 m (76.5–120.5 m) including:
o 9.90 g/t Au over 16.0 m (89–105 m) and:
o 26.14 g/t Au over 3.80 m (94.6–98.4 m)
AR25-08: low grade (bulk tonnage target) gold mineralization:
• 0.44 g/t Au over 69.45 m (8.55–78 m)- hole ended in gold mineralization.
AR25-07:
• 6.19 g/t Au over 3.95 m (142.05–146.00 m)
Pending additional analytical results for massive sulphide holes at the Twin Zone.
“These results confirm the Twin Zone as a major gold system, delivering wide, high-grade intervals
with impressive continuity,” stated Rasool Mohammad, President & CEO. “ Grade-thickness has
improved significantly, ranging up to 466%, with an average increase of approximately 280%.
With both the Twin and T-6 Zones only tested to ~100 meters vertical depth, we believe we are
just scratching the surface of a much larger opportunity.”
Geological Significance
Gold mineralization at the Twin Zone is associated with sulphide-facies iron formation — a
deposit setting comparable to major Canadian gold camps such as Lupin and Musselwhite.
The three Twin Zone holes tested ~300 meters of strike within a currently defined 600-metre-
long zone, which remains open along strike and at depth.
Twin Zone: Significant Drill Hole Intersections
Hole
Number
From
(m)
To
(m)
Core Length
(m) Au (g/t)
AR25-07 142.05 146.00 3.95 6.19
AR25-08* 8.55 78.00 69.45 0.44
AR25-09 76.50 120.50 44.00 3.86
Including 89.00 105.00 16.00 9.90
and 94.60 98.40 3.80 26.14
*Hole ended in gold mineralization
Twin Zone Drill-Hole Location Map
The Twin Zone drilling was designed to “twin” significant historic drill results to determine the
validity of the historic mineralization for inclusion into a future NI 43-101 report on the “Twin
Zone” mineralization. The mineralization targeted was intersected in holes 83-11 (AR25-07),
82-03 (AR25-08) and 82-02 (AR25-09).
The following table details the location and mineralization targeted by the “twinning” program.
See collar details below:
September 2025 Wedge Lake Drill Program: Summary Table
Hole Number East (m) North (m) Elevation
(m) Azimuth Dip Depth (m)
AR25-07 572088.7 6234410.4 458.0 350.0 -52.4 166.1
AR25-08 572183.9 6234442.9 458.0 350.5 -45.3 82.0
AR25-09 572369.0 6234656.0 457.5 169.2 -47.3 186.0
Datum: NAD 83, Zone 13N
Next Steps
The Company is integrating geological and structural data to design a follow-up drill program
aimed at:
Extending high-grade mineralization at both the Twin and T-6 Zones to depth
Step-out drilling along the ~3.9 km mineralized corridor
Additional analytical results for the massive sulphides intervals associated with the sulphide-
facies iron formation at the Twin Zone holes are pending and will be released once received,
verified, and compiled.
Hole # UTM East *UTM North * Azimuth Dip Length (m) Year Au Mineralization g/t
82-02 572268 6234656 169 -46.5 174 1982 HW 0.159 oz/t over 5.5m 4.95 g/t / 5.5m
FW 0.11 oz/t over 7.8m 3.42 g/t / 7.8m
82-03 572184 6234444 350 -44 77 1983 FW 0.07 oz/t over 4.6m 2.18 g/t / 4.6m
83-11 572089 6234413 350 -52 152 1983 HW 0.142 oz/t over 4.2m 4.42 g/t / 4.2m
* Datum: Nad 83
Note: Hole 82-02 has both HW and FW mineralization.
All thicknesses represent true width.
Reference Lewis Memo GR_84_08
2 types of mineralization:
1) HW: Hanging wall: more continuous and contains the bulk of the gold outlined to date. The west and Central Zones are of this type
2) FW: Footwall Type is erraticlly distributed and mineralized. It represents bonus tonnage. The East, DDH 82-02 and 82-03 zones are of this type.
Quality Assurance and Quality Control (QA/QC)
Arya Resources Ltd. maintains tight core-sample security, quality assurance and quality control
(QA/QC) for all aspects of its exploration program. All core samples from late Summer 2025 were
logged, photographed and sampled at Arya’s drill camp located approximately 15 km from the T-
6 Zone and 14 km west of Highway 102, 165 km north of La Ronge, Saskatchewan. Where possible,
core samples are standardized at 1.0 m down-hole intervals. The core samples are cut using a
diamond core saw with half remaining in the core box for future reference. One-half is bagged and
then placed in rice bags, secured with zip ties, and delivered by Company truck directly to SRC
Geoanalytical Laboratories (Saskatchewan Research Council) an ISO/IEC 17025 accredited lab in
Saskatoon, Saskatchewan, for preparation (crushing and pulverizing) and analyzed using sample
method AU9 for quartz-vein material at T-6 (with assumed visible gold). The sample is completely
crushed, ground, blended and split in half. One-half is archived, and the other is sieved at +/- 106
µm. All the +106 µm material is fire assayed. Two 30 g replicates are fire assayed from the -106
µm fraction. All weights, assays and calculations are reported. The remaining samples (all the Twin
Zone sampling) were analyzed using Sample method AU3-Gold by fire assay with gravimetric
finish.
Company protocols include the insertion of quality control samples consisting of blind standards
(Certified Reference Materials (CRMs)), blanks and sample duplicates into the sample stream at a
rate of 1 in 30.
Arya is not aware of any drilling, sampling, recovery, or other factors that could materially affect
the accuracy or reliability of the data referred to herein.
Qualified Person
Kevin Wells, P .Geo., a consulting geologist to the Company, is the independent qualified person,
as defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects, for the
Projects, who has reviewed, verified, and approved the contents of this news release and has
verified the data underlying the contents of this news release by review and supervision of, but
not limited to, drilling procedures, chain of custody of core and samples, logging and sampling
procedures and insertion of blind standards (CRM’s), blanks and pulp duplicates into the sample
stream.
About Arya Resources Ltd. (TSXV: RBZ)
Arya Resources Ltd. is a Canadian mineral exploration company focused on the acquisition,
exploration, and development of precious and critical-metal projects in Saskatchewan. The
Company is advancing its flagship Wedge Lake Gold Project and its Dunlop Nickel-Copper-Cobalt
Project, both located in mining-friendly jurisdictions with excellent infrastructure.
As a Tier 2 issuer on the TSX Venture Exchange, Arya is committed to building shareholder value
through discovery-driven exploration, disciplined execution, and responsible development.
On behalf of the Board of Directors:
Rasool Mohammad, CEO
Contact us below or visit us at www.aryaresourcesltd.com.
Arya Resources Ltd.
Rasool Mohammad, CEO
T: (604) 868-7737
CHF Capital Markets
Cathy Hume, CEO
T: (416) 868-1079 x 251
X: @ARYARESOURCES
Facebook: @AryaResourcesLtd.
LinkedIn: @AryaResourcesLtd.
YouTube: @ARYARESOURCES
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of
this news release.
Forward-Looking Statements
This news release includes "forward-looking statements" that are subject to assumptions, risks
and uncertainties. Statements in this news release which are not purely historical are forward-
looking statements, including without limitation any statements concerning the Company's
intentions, plans, estimates, expectations or beliefs. Although the Company believes that any
forward-looking statements in this news release are reasonable, there can be no assurance that
any such forward-looking statements will prove to be accurate. The Company cautions readers
that all forward-looking statements, including without limitation to those relating to the
Company's future operations and business prospects, are based on assumptions, none of which
can be assured, and are subject to certain risks and uncertainties that could cause actual events
or results to differ materially from those indicated in the forward-looking statements. Readers are
advised to rely on their own evaluation of such risks and uncertainties and should not place undue
reliance on forward-looking statements. Any forward-looking statements are made as of the date
of this news release, and the Company assumes no obligation to update the forward-looking
statements, or to update the reasons why actual events or results could or do differ from those
projected in the forward-looking statements. Except as required by law, the Company assumes
no obligation to update any forward-looking statements, whether as a result of new information,
future events or otherwise.