Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

PWM.V ·

Power Metals Forms Strategic Review Committee

Mergers & Acquisitions

Power Metals Forms Strategic Review Committee

VANCOUVER, BRITISH COLUMBIA – (January 14th, 2020) - Power Metals Corp. ("Power Metals

Corp." or the " Company") (TSX VENTURE:PWM)(FRANKFURT:OAA1)(OTC:PWRMF) is pleased to

announce the formation of a strategic committee responsible for reviewing several recent

options regarding the Company’s 100% owned Case Lake property. These options include the

continuation of further drilling and development at Case Lake, a potential joint -venture with a

strategic partner or the potential sale of the property.

Johnathan More, Chairman and Director, stated “After enduring a very dismal 2019 in the

overall lithium space , we have decide d to rekindle our focus and efforts to unlocking the huge

value we see in our Case Lake property . We have done a tremendous amount of work to date

at Case Lake and have enough available exploration reserve to keep them in good standing for

the next 5 years.”

In addition to the lithium potential at Case Lake, Power Metals has received significant interest

in its Cesium mineralization discovered at the West Joe spodumene pegmatite in August 2018.

Pollucite (Cesium’s ore mineral) is rare in pegmatites in Ontario, as it has only been identified in

five pegmatite localities in the province: Power Metals owns 3 of the 5 - its 100% owned Case

Lake Property, and its 100% owned Tot Lake and Marko’s pegmatites. The presence of pollucite

in drill core at West Joe is spatially associated with high -grade Lithium (Li) and Tantalum (Ta)

mineralization and should indicate very low Iron contents in the spodumene.

West Joe Dyke contains Cesium (Cs) mineralization as shown by the presence of pollucite in drill

core (Figure 1) and exceptionally high-grade Cs intervals:

• 14.70 % Cs2O over 1.0 m, 13.0 to 14.0 m, PWM-18-126

• 12.40 % Cs2O over 1.0 m, 10.0 to 11.0 m, PWM-18-112

• 6.74 % Cs2O over 5.0 m, 11.0 to 16.0 m, PWM-18-126

Additional Cs assays from the West Joe Dyke are given in Power Metals press release dated Nov.

13, 2018.

Figure 1 Pale pink to grey pollucite with white veining next to pale green spodumene at 49.5 m,

PWM-18-116, West Joe Dyke

Cesium is rare globally. The United States Department of the Interior included Lithium, Cesium

and Tantalum on its list of Critical Minerals (USGS website:

https://www.usgs.gov/news/interior-releases-2018-s-final-list-35-minerals-deemed-critical-us-

national-security-and, dated May 18, 2018). These “commodities qualify as “critical minerals”

because each has been identified as a non-fuel mineral or mineral material that is essential to

the economic and national security of the United States, that has a supply chain vulnerable to

disruption, and that serves an essential function in the manufacturing of a product, the absence

of which would have significant consequences for the economy or national security” (USGS

website: https://www.usgs.gov/news/interior-releases-2018-s-final-list-35-minerals-deemed-

critical-us-national-security-and, dated May 18, 2018).

There are only 2 pegmatite mines globally that produce cesium:

• Bitika, Zimbawe (currently not producing)

• Sinclair, Australia

There is a limited nu mber of companies in the cesium supply chain. Pioneer Resources Limited

entered into an offtake agreement with Cabot Specialty Fluids Ltd to sell 100% of the cesium

ore extracted from the Sinclair Zone Cesium Deposit to Cabot (Pioneer press release dated June

20, 2018). The Cabot Corporation’s Specialty Fluids business including the Tanco mine was sold

to Sinomine Resource Group Co., Ltd.

(https://www.businesswire.com/news/home/20190628005482/en/Cabot-Corporation-

Completes-Sale-Specialty-Fluids-Business, dated June 28, 2019). Following the sale of Cabot’s

Specialty Fluids business to Sinomine, Pioneer Resources has been shipping its pollucite stocks

to Sinomine Specialty Fluids Limited (Pioneer press releases dated Aug. 15, 2019 and Sept. 11,

2019).

Other highlights of Power Metals exploration on our flagship Lithium (Li), Tantalum (Ta) and

Cesium (Cs) Case Lake Property to date include:

• 5405.08 m, 50 drill holes on the Main Dyke

• 3020.0 m, 33 drill holes on Northeast Dyke

• 4571 m, 44 drill holes on Main, new dykes, East Dykes and including 18 holes on West

Joe Dyke

• Discovery of West Joe Li-Ta-Cs spodumene pegmatite

• Discovery of spodumene on Dome 9

One of the highlights from the 2018 drill program was drill hole PWM -18-84 which successfully

intersected 126.25 m of pegmatite within the Main Dyke at Case Lake. The purpose of this

longitudinal drill hole was to test the continuity of the Main Dyke along strike and down dip.

PWM-18-84 intersected continuous pegmatite from 2.0 - 128.25 m. Assay highlights on for

PWM-18-84 include:

• 1.42 % Li2O and 158 ppm Ta over 19.17 m, interval 2.00 – 21.17 m

• 1.17 % Li2O and 193 ppm Ta over 27.16 m, interval 54.84 – 82.00 m

These two high-grade intervals are separated by a quartz core.

Quality Control

The drill core was sampled so that 1 m of the Case Batholith tonalite host rock was sampled

followed by 1 m long samples of the pegmatite dyke and 1 m of the Case Batholith. The

sampling followed lithology boundaries so that only one lithology unit is within a sample,

except for the < 20 cm pegmatite veins in tonalite which were merged into one sample. The

drill core samples were delivered to SGS preparation lab in Cochrane by Power Metals’

geologists. The core was then shipped to SGS analytical lab in Lakefield, Ontario which has ISO

17025 certification. Every 20 samples included one external quartz blank, one external lithium

standard and one core duplicate. The ore grade Li 2O% was prepared by sodium peroxide fusion

with analysis by ICP -OES with a detection limit of 0.002 % Li 2O. A QA/QC review of the

standards and blanks for this drill program indicate that they passed and the drill core assays

are accurate and not contaminated.

Case Lake

Case Lake Property is located in Steele and Case townships, 80 km east of Cochrane, NE Ontario

close to the Ontario-Quebec border. The Case Lake pegmatite swarm consists of six spodumene

dykes: North, Main, South, East and Northeast Dykes on the Henry Dome and the West Joe

Dyke on a new tonalite dome. Case Lake Property consists of 449 cell claims in Steele, Case,

Scapa, Pliny and Abbotsford townships, Larder Lake Mining Division. The Case Lake Property is

owned 100% by Power Metals. The claims have enough available exploration reserve to keep

them in good standing for the next 5 years.

Qualified Person

Julie Selway, Ph.D., P.Geo. supervised the preparation of the scientific and technical disclosure

in this news release. Dr. Selway is the VP of Exploration for Power Metals and the Qualified

Person ("QP") as defined by National Instrument 43 -101. Dr. Selway is supervising the

exploration program at Case Lake. Dr. Selway completed a Ph.D. on granitic pegmatites in 1999

and worked for 3 years as a pegmatite geoscientist for the Ontario Geological Survey. Dr.

Selway also has twenty -three scientific journal articles on pegmatites. A Natio nal Instrument

43-101 report has been prepared on Case Lake Property and filed on July 18, 2017.

About Power Metals Corp.

Power Metals Corp . is a diversified Canadian mining company with a mandate to explore,

develop and acquire high quality mining projec ts. We are committed to building an arsenal of

projects in both lithium and high- growth specialty metals and minerals . We see an

unprecedented opportunity to supply the tremendous growth of the lithium battery and clean -

technology industries. Learn more at www.powermetalscorp.com

ON BEHALF OF THE BOARD,

Johnathan More, Chairman & Director

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in

policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the

content of this news release.

No securities regulatory authority has either approved or disapproved of the contents of this

news release. The securities being offered have not been, and will not be, registered under the

United States Securities Act of 1933, as amended (the "U.S. Securities Act"), or any state

securities laws, and may not be offered or sold in the United States, or to, or for the account or

benefit of, a "U.S. person" (as defined in Regulation S of the U.S. Securities Act) unless pursuant

to an exemption therefrom. This press release is for information purposes only and does not

constitute an offer to sell or a solicitation of an offer to buy any securities of the Company in any

jurisdiction.

Power Metals Corp.

Johnathan More

646-661-0409

[email protected]

Cautionary Note Regarding Forward-Looking Information

This press release contains forward-looking information based on current expectations,

including the use of funds raised under the Offering. These statements should not be read as

guarantees of future performance or results. Such statements involve known and unknown risks,

uncertainties and other factors that may cause actual results, performance or achievements to

be materially different from those implied by such statements. Although such statements are

based on management's reasonable assumptions, Power Metals assumes no responsibility to

update or revise forward-looking information to reflect new events or circumstances unless

required by law.

Although the Company believes that the expectations and assumptions on which the forward-

looking statements are based are reasonable, undue reliance should not be placed on the

forward-looking statements because the Company can give no assurance that they will prove to

be correct. Since forward-looking statements address future events and conditions, by their very

nature they involve inherent risks and uncertainties. These statements speak only as of the date

of this press release. Actual results could differ materially from those currently anticipated due

to several factors and risks including various risk factors discussed in the Company's disclosure

documents which can be found under the Company's profile onwww.sedar.com.

This press release contains "forward-looking statements" within the meaning of Section 27A of

the Securities Act of 1933, as amended, and Section 21E the Securities Exchange Act of 1934, as

amended and such forward-looking statements are made pursuant to the safe harbor provisions

of the Private Securities Litigation Reform Act of 1995. The TSXV has neither reviewed nor

approved the contents of this press release.