PWM.V · 2025-07-29 12:00:00

FINAL CESIUM TEST WORK SUCCESSFULLY COMPLETED AT CASE LAKE Major Highlights Results from the world's leading testing, inspection and certification (TIC) company, SGS, confirms outstanding cesium extraction of 97% from the Case Lake pollucite

Metallurgy & Processing

FINAL CESIUM TEST WORK SUCCESSFULLY

COMPLETED AT CASE LAKE

Major Highlights

Results from the world's leading testing, inspection and certification (TIC) company,

SGS, confirms outstanding cesium extraction of 97% from the Case Lake pollucite

concentrate material:

Produced technical grade cesium formate with 2.23 g/mL density and 99.8% purity

Produced technical grade cesium chloride with very low impurities, achieving 99.6%

purity

Confirms ability to produce technical grade cesium chemicals, following the recent

metallurgical test-work on Case Lake cesium concentrate

Successful completion of all test work from West Joe signals

The results are a major milestone in de-risking the West Joe pegmatite zone at Case

Lake:

XRT Ore Sorting Phase I, production of cesium concentrate (Cs

XRT Ore Sorting Phase II, bulk sample production of cesium concentrate (Cs

Production of lithium concentrate material (Li

Production of tantalum concentrate material (Ta)

Production of technical grade cesium chemicals (CsCl, and HCOOCs)

two-stage crystallization and recrystallization process successfully produced low-

impurity cesium alum crystals, grading 21.4% Cs, 4.7% Al, with 0.01% Rb, 0.01% Si as

the main impurities

Case Lake remains the only global cesium project with near term production capacity

VANCOUVER, BC

July 29, 2025

/CNW/ - Power Metals Corp (

"Power Metals"

or the

"Company"

)

(TSX VENTURE: PWM) (FRANKFURT: OAA1) (OTCQB: PWRMF) is pleased to announce the

production of technical grade cesium chemicals for the Case Lake Cesium Project ("Case Lake")

with the confirmation of cesium chloride and cesium formate.

The production of technical grade chemicals further to our recent maiden MRE confirms the viability

of Case Lake to produce industry standard cesium chemicals for the oil and gas industry, solar and

battery technology, military applications and medical industry.

The Company remains focused on delivering high-grade critical minerals from Case Lake with recent

test work highlighting our ability to produce clean cesium, tantalum, and lithium products to the

critical minerals market.

_______________________________

1,2

Purity was calculated as "100 – sum of impurities" based on trace metal analysis

Haydn Daxter, CEO of Power Metals commented:

"The completion of our metallurgical test work with cesium chemical production marks a significant

milestone for the Company, confirming Case Lake as a near term cesium operation with a low

impurity and cost-effective processing to the North American market."

"The latest results align with the recent completion of our maiden MRE and metallurgical test work

at Case Lake, positioning the Company as a first mover in this rapidly evolving market."

Johnathan More

, Chairman of Power Metals commented:

"I am very pleased to see the final round of metallurgical test work results with the production of

technical grade cesium chemicals from Case Lake. The project offers three viable avenues for

critical minerals as the global demand continues to grow."

"This final round of metallurgical test work and recent MRE has been compiled from over

7,000m

of exploration drilling, demonstrating a strong amount of confidence to our shareholders and the

market as we continue to de-risk the project in preparation for production."

Cesium Chemical Production

The Company has successfully produced cesium formate and cesium chloride, two globally highly

sought cesium chemicals, from pollucite concentrate samples generated during Phase I ore sorting

testwork the company completed in 2024 (see

December 3, 2024

, press release). The cesium

chemicals conversion test work was conducted at SGS Canada, a leading metallurgical and testing

laboratory located in

Lakefield, Ontario, Canada

The testwork used a blended concentrate sample with an average feed grade of 19.5% Cs

created from pollucite concentrates 24-036-01P and 24-036-03P, produced during Phase I ore

sorting. The composite sample was crushed to 100% passing 106 μm and then underwent a series

of tests including hot acid leaching, cesium alum crystallization, and liquor treatment, resulting in

production of technical grade cesium formate and cesium chloride with purities of 99.8% and 99.6%,

respectively (Figure 1-3).

Figure 1 – Sample of 99.8% cesium formate solution with density 2.23 g/mL produced from West

Joe pollucite concentrate (CNW Group/Power Metals Corp.)

Figure 2 – Sample of 99.6% cesium chloride crystals produced from West Joe pollucite concentrate

(CNW Group/Power Metals Corp.)

The pollucite concentrate exhibited a favourable response to hot sulphuric acid leaching, achieving

97% cesium extraction efficiency (Table 1). A two stage (50ºC and 20ºC) cesium alum crystallization

was completed on the leach liquor to generate a high-quality crystal in the first stage, followed by

residual cesium crystallization in the second stage low temperature crystallization (along with some

rubidium and other impurities) . The majority of the cesium (up to 71%) was recovered at 50°C, with

additional recovery achieved upon cooling to 20°C, resulting in crystallization efficiency rates

between 95% and 98%.

The crystals from 50°C stage were redissolved and subjected to similar two-stage recrystallization.

Up to 89% of the material recrystallized at 50°C, with final efficiencies reaching up to 98% following

the 20°C step (Table 3).

Figure 3 – Block Flow Diagram followed by SGS Lakefield to produce cesium formate and cesium

chloride from West Joe pollucite concentrate (CNW Group/Power Metals Corp.)

Further purification and conversion tests were conducted on the 50°C pure cesium alum product,

including the removal of aluminum (and some sulphate), and the subsequent conversion to cesium

hydroxide. Cesium formate and cesium chloride were subsequently synthesized from the cesium

hydroxide, meeting industry-standard specifications for low impurity levels in both compounds

(Tables and 4, Figures 1 and 2). Additionally, the cesium formate solution demonstrated a density of

2.23 g/mL, which falls within the industry standard range of 2.2 g/mL to 2.4 g/mL for cesium

formate.

Table

– Extraction Rates for Leaching Tests (SAL-04 to SAL-07)

Extraction (%)

Element

SAL-04

SAL-05

SAL-06

SAL-07

Table

– Summary of Crystallization Rates (%) for Two-Stage Crude Cesium Alum

Element

Crude Cesium Alum Crystallization

Cesium Alum Recrystallization

50°C Stage

Combined

(50°C and 20°C)

50°C Stage

Combined

(50°C and 20°C)

__________________________________

Reported results are based on the test yielding the highest Cs crystallization efficiency

Table

– Summary assay results for cesium formate solution

(Cs, Rb, Ag, Al, As, Bi, Cd, Co,

Cr, Li, Mn, Mo, Ni, P, Pb, Sb, Se, Sn, Sr, Tl, V, and Y were analyzed via ICP-MS, TOC via

Skalar TOC analyzer, all remaining elements were analyzed via ICP-AES)

g/L

TOC

g/L

mg/L

1220

128

<0.5

226

0.04

<0.1

<0.03

0.05

<0.8

mg/L

<0.7

<0.1

210

<0.9

266

mg/L

360

<0.4

230

<0.6

6.7

<0.2

0.18

<0.1

<0.2

Table

– Summary assay methods for the cesium chloride crystals

(Cs, Rb, and Pb were analyzed via ICP-MS, Cl via titration, all remaining elements were

analyzed via ICP-AES)

g/t

78.0

19.9

<30

2.59

<0.02

<10

<0.9

g/t

2330

<20

<0.4

142

<50

169

130

g/t

<10

<30

<20

0.2

<0.2

<30

<0.2

These initial tests show that the pollucite concentrate from Power Metals West Joe deposit can be

efficiently converted into cesium formate and cesium chloride using established methods, with

samples meeting industry specifications and low impurities.

Case Lake Property

The Case Lake Property is located 80 km east of

Cochrane

in northeastern

Ontario

, near the

Ontario Quebec border. It comprises 586 cell claims across Steele, Case, Scapa, Pliny,

Abbotsford

and Challies townships within the Larder Lake Mining Division. The Property is 10km by 9.5km in

size with 14 granitic domes.

The Case Lake pegmatite swarm consists of six spodumene dykes known as the North, Main,

South, East and Northeast dykes on the Henry Dome, and the West Joe dyke on a new dome,

collectively forming mineralization trend that extends for approximately 10km (Figure 4).

Power Metals has completed several exploration campaigns leading to the discovery and expansion

of new and historic spodumene bearing LCT pegmatites at Case Lake. The Company has drilled a

total of 23,976 meters of core between 2017 and 2024 at the Property. The Case Lake Property is

owned 100% by Power Metals Corp. A National Instrument 43-101 Technical Report has been

prepared on Case Lake Property and filed on

July 18, 2017

(Figure 4).

Decelles Property

The Decelles Property contains 247 claims, covering 14,229 hectares of LCT prospective ground

near the mining centres of Val-dÓr and

Rouyn-Noranda

, approximately 600km from

Montreal

Power Metals acquired the Decelles and Mazerac properties from Winsome Resources in 2023 in a

deal that increased Winsome equity stake to 19.59% (refer to press release announced on

August 24, 2023

), the transaction remains subject to TSXV approval. The geology of Decelles

property is part of the Archean Pontiac sub-province where S-type LCT prospective, pegmatite

bearing, granitic Decelles Batholith intrudes into metasedimentary units of the Pontiac Group.

Spodumene and Beryl bearing pegmatites have been reported historically within the

Pontiac

sub-

province in association with S-type garnet-muscovite granite. The Decelles property is adjacent to

Vision Lithium's Cadillac property where discovery of high-grade lithium pegmatites was reported in

2022 (Figure 4).

Mazerac Property

The Mazerac Property is located approximately 30 km east of Power Metals' Decelles property near

well-established mining camps in the Abitibi region of

Canada

and is accessible by network of

mining-grade forestry roads. The Mazerac property contains 115 claims that cover 6,653 hectares

of LCT prospective ground near the mining centre of Val-dÓr and

Rouyn-Noranda

. The regional

geology of Mazerac is similar to Decelles where S-type LCT prospective, pegmatite bearing,

granites of Decelles Batholith intrude into metasedimentary units of the Pontiac Group. Spodumene

and Beryl bearing pegmatites have been reported historically within the

Pontiac

sub-province in

association with S-type garnet-muscovite granite (Figure 4).

Figure 4 – Power Metals Corp Project Locations Map in Ontario and Quebec Canada (CNW

Group/Power Metals Corp.)

Pollucite and Cesium

Pollucite is a rare mineral that hosts high grade cesium and is associated with highly fractionated,

rare element pegmatites. The main source of cesium known globally is pollucite

(Cs,Na)

(Al

)•2H

O, (

https://www.gov.mb.ca/iem/geo/industrial/pollucite.html

). Currently there

is no operational mining of high-grade cesium from pollucite occurring globally.

Scientific and Technical Disclosure

The scientific and technical disclosure included in this news release for Hydrometallurgical test work

has been reviewed and approved by

James Brown

, MASc., P.Eng., Manager of Extractive

Metallurgy at SGS Canada, a Qualified Person under National Instrument 43-101 Standards of

Disclosure of Mineral Projects (NI 43-101) and a member in good standing with Professional

Engineers Ontario (100114888).

SGS

Canada

is independent of the Company.

The scientific and technical disclosure included in this news release has been reviewed and

approved by

Amanuel Bein

, M.Sc., P.Geo., Vice President of Exploration for Power Metals, a

Qualified Person under National Instrument 43-101 Standards of Disclosure of Mineral Projects (NI

43-101) and a member in good standing with Association of Professional Geoscientists of

Ontario

(3524).

Power Metals Corp (TSX-V: PWM)

Power Metals Corp (TSX-V: PWM) is a Canadian exploration company focused on developing high-

quality critical mineral projects.

Its flagship Case Lake Property in

Ontario

– 100 per cent owned by Power Metals - is a high-grade

cesium, lithium and tantalum asset, poised to become one of only four cesium mines globally.

Beyond Case Lake, the Company's portfolio includes the Decelles and Mazerac Properties near

Val-

D'Or

, Québec. Together, these assets cover 947 claims spanning more than 330km² of lithium-

cesium-tantalum (LCT) prospective ground.

As global demand for critical minerals continues to grow global, and particularly in

North America

Power Metals is strategically advancing its projects to support the continent's growing supply needs.

Learn more at

www.powermetalscorp.com

-ON BEHALF OF THE BOARD-

Johnathan More

, Chairman & Director

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in

policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the

content of this news release.

No- securities regulatory authority has either approved or disapproved of the contents of this news

release. The securities being offered have not been, and will not be, registered under the United

States Securities Act of 1933, as amended (the "U.S. Securities Act"), or any state securities laws,

and may not be offered or sold in

the United States

, or to, or for the account or benefit of, a "U.S.

person" (as defined in Regulation S of the U.S. Securities Act) unless pursuant to an exemption

therefrom. This press release is for information purposes only and does not constitute an offer to

sell or a solicitation of an offer to buy any securities of the Company in any jurisdiction.

Cautionary Note Regarding Forward-Looking Information

This press release contains forward-looking information based on current expectations, including

the use of funds raised under the Offering. These statements should not be read as guarantees of

future performance or results. Such statements involve known and unknown risks, uncertainties

and other factors that may cause actual results, performance or achievements to be materially

different from those implied by such statements. Although such statements are based on

management's reasonable assumptions, Power Metals assumes no responsibility to update or

revise forward-looking information to reflect new events or circumstances unless required by law.

Although the Company believes that the expectations and assumptions on which the forward-

looking statements are based are reasonable, undue reliance should not be placed on the forward-

looking statements because the Company can give no assurance that they will prove to be correct.

Since forward-looking statements address future events and conditions, by their very nature they

involve inherent risks and uncertainties. These statements speak only as of the date of this press

release. Actual results could differ materially from those currently anticipated due to several

factors and risks including various risk factors discussed in the Company's disclosure documents

which can be found under the Company's profile onwww.sedar.com.

This press release contains "forward-looking statements" within the meaning of Section 27A of the

Securities Act of 1933, as amended, and Section 21E the Securities Exchange Act of 1934, as

amended and such forward-looking statements are made pursuant to the safe harbor provisions of

the Private Securities Litigation Reform Act of 1995. The TSXV has neither reviewed nor approved

the contents of this press release.

SOURCE

Power Metals Corp.

View original content to download multimedia:

http://www.newswire.ca/en/releases/archive/July2025/29/c6111.html

%SEDAR: 00024408E

For further information:

Power Metals Corp, Johnathan More, 515-401-7479,

[email protected]

CO: Power Metals Corp.

CNW 08:00e 29-JUL-25

← Back to feed