Power Metallic Intercepts 5.35 Meters of 11.97% Cu (16.35% CuEqRec) in Hole 25-022 Infill Drilling Expanding the Lion Zone and Updates on Fall/Winter Drill Program and Land Assembly
Power Metallic Intercepts 5.35 Meters of 11.97% Cu (16.35% CuEqRec) in
Hole 25-022 Infill Drilling Expanding the Lion Zone and Updates on
Fall/Winter Drill Program and Land Assembly
TORONTO
,
Nov. 4, 2025
/CNW/ -
Power Metallic Mines Inc
.
(the
"Company"
or
"Power Metallic"
)
(TSXV: PNPN) (OTCBB: PNPNF) (Frankfurt: IVV1) is
pleased to provide a release of assays from its summer drill program, an update on its land assembly activities together with an outlook to the fall and winter key
exploration objectives.
Summer Drilling Release 2 – Lion – Tiger Area
The summer drilling program was designed to search for extensions to the Lion Zone, specifically down plunge from known mineralization, and to infill drill,
including 'edge' holes, on the Lion zone to define the zone geometry to a confidence level that would allow a future mineral resource estimate to be carried out to
an Indicated Resource classification.
Extensional Drilling Results (Table 1, Figure 1)
Extensional drilling was slow during the summer program as technical problems with the helicopter supported drills led to lost holes (such as holes PML-25-019
and 024a in this release) that did not reach the mineralization horizon for Lion. Hole PML-25-017 has extended the zone to the west but failed to intersect the
High-grade massive sulphide portion of the Lion zone and returned a disseminated zone of
7.00m
@ 1.41% CuEqRec
1
that confirms the extension of the
mineralizing Lion structure which will see continued follow-up in the 2025 fall program.
The Company intends to use more powerful skid drills when possible going forward when testing the Lion Zone extension at depth to avoid similar issues.
Mineral Resource(MRE) Drilling Results (Table 1, Figure 1)
In-fill drilling has successfully defined mineralization along some of the high-grade shoots that are internal to the Lion zone and defined the edges of the Lion zone
for future MRE modelling. Drilling reported here intersected mineralization on Hanging-wall, High-grade, and Footwall portions of Lion, including High-grade
sulphide intersections of
6.85m
@ 13.15% CuEqRec
1
in hole PML-25-022 (inclusive of
5.35m
of 16.35% CuEqRec
1
), and
5.90m
@ 10.43% CuEqRec
1
in hole
PML-25-022, included within
27.50m
@ 2.75% CuEqRec
1
. All the in-fill drilling to date has largely confirmed the size, grade, and orientation that was modelled
prior to the drilling, leading to increased confidence in the interpreted zones.
Terry Lynch
, CEO of Power Metallic states "These are some amazing high-grade intersections. Any hole delivering over 50 meter % (Grade %*Metres) scores is
an extremely lucrative hole. We have extended the known resource area and increased our understanding of the plunge of the Lion Zone. Our objective with
drilling this summer was to extend the Lion Zone which is being accomplished and also to discover the next Lion Zone. That part we have not yet completed. But
we have gained excellent insight that is guiding our fall and winter drilling program. In addition, we didn't drill our highest priority drill targets due to their proximity
to the land assembly activities we were working on. With that ground now secured we can discuss those targets below."
Table 1: Release 2 - Assay results Summer 2025 - Nisk Project
Hole
From
To
Length
Au
Ag
Cu
Pd
Pt
Ni
CuEq
Rec
1
(m)
(m)
(m)
(g/t)
( g/t )
( %)
(g/t)
( g/t )
( %)
( %)
LION
PML-25-017
539.00
546.00
7.00
0.92
2.35
0.38
0.01
0.01
0.14
1.41
Including
539.00
540.00
1.00
4.90
10.90
2.32
0.01
0.01
0.18
6.35
PML-25-019
Hole lost before intersecting the mineralized horizon
PML-25-022
358.20
364.40
6.60
0.11
1.78
0.23
3.46
0.54
0.02
1.71
Including
358.20
360.20
2.00
0.30
4.20
0.59
10.60
1.66
0.05
5.05
and
372.65
379.50
6.85
2.09
43.79
9.39
8.57
0.83
0.26
13.15
Including
372.65
378.00
5.35
2.55
54.78
11.97
10.38
0.65
0.33
16.35
including
412.70
413.75
1.05
0.03
10.40
2.45
0.02
0.01
0.17
2.45
PML-25-023
341.00
368.50
27.50
0.10
15.05
1.68
1.89
0.91
0.12
2.75
Including
352.75
368.65
5.90
0.20
66.36
7.28
6.84
3.28
0.25
10.43
PML-25-024a
Hole lost before intersecting the mineralized horizon
PML-25-027
422.00
436.50
14.50
0.09
2.27
0.32
0.50
0.98
0.16
1.15
including
428.00
430.00
2.00
0.11
6.50
1.40
0.53
6.22
0.75
4.81
LION - TIGER
PML-25-021
436.30
440.00
3.70
0.57
3.93
0.55
0.41
0.18
0.18
1.48
including
437.85
438.55
0.70
2.90
14.30
2.11
0.95
0.23
0.31
4.90
PML-25-026a
no significant assay results
PML-25-030
no significant assay results - Off hole BHEM anomaly
Note: Reported length is downhole distance; true width based on model projections is estimated as 85% of downhole length
1
Copper Equivalent Rec Calculation (CuEqRec
1
)
CuEqRec represents CuEq calculated based on the following metal prices (USD) : 2,360.15 $/oz Au, 27.98 $/oz Ag, 1,215.00 $/oz Pd, 1000.00 $/oz Pt, 4.00 $/lb
Cu, 10.00 $/lb Ni and 22.50 $/lb Co., and a recovery grade of 80% for all commodities, consistent with comparable peers.
Tiger Deep Target (Table 1, Figure 1)
Three holes reported here (PML-25-021, 026a, 030) were drilled below the depth resolution of the recent 2025 airborne VTEM survey completed by Power
Metallic. These holes (Figure 1) were testing the area between Lion and Tiger to intersect the mineralized horizon and provide drill holes for BHEM surveys.
Although essentially blind exploration drill holes, evidence from previous work, including shallow drilling, including intercepts of >2% Ni with >5% CuEq, suggested
a high potential for mineralized zones between Lion and Tiger.
Hole PML-25-026, drilled closest to Lion returned no significant assays, while the BHEM survey off-hole conductors were pointing to the presence of the Lion
deposit. Hole PML-25-021 intersected a modest Lion style mineralized zone (
3.70m
@ 1.48% CuEqRec
1
) and indicated an off-hole anomaly separate from the
Lion deposit. This location is proximal to a postulated off-set shoot from the Lion zone, or possibly could be indicating a new Lion style zone.
Hole PML-25-030 did not intersect significant mineralization, but the BHEM survey produced a large, possibly thick bodied anomaly deeper and to the east of the
hole. The BHEM panel defined at Tiger Deep represents one of the biggest EM panels identified to date, larger than the original Lion airborne VTEM panel. This
location is proximal to a postulated 'Deep Tiger' target that is based on reinterpretation of previous Tiger drilling and surface mapping that suggests Tiger is made
up of 'rip-up' blocks of massive sulphides carried in a tonalitic intrusion from a deeper and larger deposit. Both the PML-25-030 and PML-25-021 BHEM anomalies
are being prioritised for drilling (the PML-25-030 BHEM is currently being drilled).
For more detail on the results, the land assembly program and our future exploration program please check out the podcast we recorded along with this release
just below the next image.
Figure 1: Lion Area long-section with drill hole locations reported in this news release. (CNW Group/Power Metallic Mines Inc.)
Power Metallic Podcast Discussing Results and Future Exploration Plans
Please click on or copy and paste the below web address into your browser
https://youtu.be/hn3TNG29-Jo
Land Assembly Activities
Power Metallic's discovery of the Lion Zone changed the geological understanding for the basin. We now understand that the Lion zone and the Nisk deposits are
parts of a remobilized polymetallic Ni-Cu system, which are rare, but historically have always occurred at district scales and produce giant deposits. Based on this
knowledge over the last several months we assembled more than a 600% increase in our land package growing from 46 km
2
to 313 km
2
.
Figure 2: Land package showing land additions (Li-Fi & Hydro Land Expansion and new claims) (CNW Group/Power Metallic Mines Inc.)
For now, we are in sole possession of the geological understanding about what works in respect to making discoveries in this regional Basin. Our search
encompasses the entire basin, but we have acquired the local basin edges as the lowest hanging fruit to explore first (shallower deposits close to known
mineralization), and this was the central strategy for acquiring the Li-FT ground in June (Figure 2). Subsequent exploration, including airborne VTEM and
magnetics and field mapping and sampling, have developed dozens of target areas for Cu- Ni mineralization. These are currently being prioritized and drilled
following receiving drill permits (ATIs in Figure 2).
Arguably our most important acquisition is land that had been under an exclusion from Hydro Quebec surface leases (Hydro ground - Figure 2). With the
assistance of the James Bay Cree, we were able to successfully convince the
Quebec
government to open these lands for mineral staking, and we staked it in
late September. This area is most important to Power Metallic as it covers the extension of the Lion mineralizing system (i.e. our discovery). Prior to the
acquisition of the Hydro ground, we did not have claim ownership over a target area that contains an important fold axis through the mineralized geological
horizons as seen by 2D Residual magnetic intensity interpreted ultramafic structures (Figures 3 and 4). In addition, the entire north limb of this fold hosting the
strike length between Lion and Nisk was too close to the old property boundary to safely explore the ground, thus delaying exploration on our highest priority
target.
Figure 3: Nisk / Lion / Hydro land showing 2D Residual magnetic intensity of interpreted ultramafic structures and fold hinge (CNW Group/Power Metallic Mines
Inc.)
The Hydro area covers an interpreted fold hinge that could provide a thickening of projected Cu and Ni mineralization proximal to the Lion and Tiger zones. An
analogue deposit we believe is comparable to the Nisk and Lion deposits is the
Thompson
nickel deposit. A cross section of the
Thompson
deposit is shown in
Figure 4.
Figure 4: Cross-section through the Thompson Structure facing northeast (line Y-Y’, figure 9; Bleeker 1990). (CNW Group/Power Metallic Mines Inc.)
The potential of a fold hinge target is supported by magnetic data (Figures 4 and 5) that has modelled the folded ultramafic host rocks. Subsequent BHEM
anomalies in holes PN-24-064 (Figure 4) and PML-25-030 and 021 further suggest a large body of mineralization is coincident with the anticipated fold hinge. The
BHEM anomaly detected in PN-24-064 had greater than one hundred meters of build up at the bottom of the hole however the hole didn't have the required length
to show the full anomaly. Re-entry of PN-24-064 is underway to extend the hole a further 250 meters – to fully define where the BHEM panel exists, and to
potentially intersect a portion of the conductive body.
Figure 5: Cross section from Lion to southern Hydro land showing magnetic inversion and interpreted ultramafic structures including fold. (CNW Group/Power
Metallic Mines Inc.)
Power Metallic Announces Marketing Services Programs
In advance of potential expansion to broader capital market exchanges, Power Metallic has entered the following marketing services agreements.
In addition, the Company is pleased to announce that it entered into a service agreement with Native Ads, Inc. ("Native Ads") dated
October 29, 2025
pursuant to
which Native Ads will provide a marketing campaign for a total retainer of up to
US$168,000
, with a term of up to eighteen months or until the retainer is depleted.
Under the agreement, Native Ads will execute a comprehensive digital media advertising campaign for the Company, where approximately 75% of the campaign
budget will be allocated to cost per click costs, media buying and content distribution, and search engine marketing. The remaining budget will be allocated for
content creation, web development, advertising creative development, search engine optimization, campaign optimization, and reporting and data insights services.
Native Ads is a full-service advertising agency based out of
New York
and
Vancouver
, BC. Native Ads and its principal
Jon Malach
are arms length to the
Company and hold no interest, directly or indirectly, in the securities of the Company or any right to acquire such an interest. The engagement of Native Ads by
the Company is subject to the approval of the TSX Venture Exchange ("TSXV").
The Company has also entered into a service agreement with Sideways Frequency ("Sideways")
November 3, 2025
pursuant to which Sideways will provide a
market awareness campaign for a total retainer of up to
US$150,000
with a term running until
December 31, 2026
. Under the agreement, Sideways will provide
services aimed at raising awareness, including articles, and email campaigns, social media and digital media campaigns. Sideways and its principals are
independent of Power Metallic, operating at arm's length, and are not related parties. As part of this marketing agreement, the Company has granted 250,000
options to vest in four segments quarterly over the initial 12 months exercisable at a price of
$1.45
and for a term ending 2 years from the date of issuance. The
engagement of Sideways by the Company is subject to the approval of the TSXV.
Finally, the Company has retained Apaton Finance GmbH who will provide a market awareness campaign for a total retainer of up to
84,817 Euro
with a term
running until
December 31, 2026
. Under the agreement, Apaton will provide services aimed at raising awareness, including articles, and email campaigns, social
media and digital media campaigns. Apaton and its principals are independent of Power Metallic, operating at arm's length, and are not related parties. As part of
this marketing agreement, the Company has granted 100,000 options to vest in four segments quarterly over the initial 12 months exercisable at a price of
$1.45
and for a term ending 2 years from the date of issuance. The engagement of Apaton by the Company is subject to the approval of the TSXV.
Qualified Person
Joseph Campbell
, P.Geo, VP Exploration at Power Metallic, is the qualified person who has reviewed and approved the technical disclosure contained in this
news release.
About Power Metallic Mines Inc.
Power Metallic is a Canadian exploration company focused on advancing the Nisk Project Area (Nisk–Lion–Tiger)—a high–grade Copper–PGE, Nickel, gold and
silver system—toward Canada's next polymetallic mine.
On
1 February 2021
, Power Metallic (then Chilean Metals) secured an option to earn up to 80% of the Nisk project from Critical Elements Lithium Corp. (TSX–V:
CRE). Following the
June 2025
purchase of 313 adjoining claims (~167 km²) from Li–FT Power, the Company now controls ~212.86 km² and roughly 50 km of
prospective basin margins.
Power Metallic is expanding mineralization at the Nisk and Lion discovery zones, evaluating the Tiger target, and exploring the enlarged land package through
successive drill programs.
Beyond the Nisk Project Area, Power Metallic indirectly has an interest in significant land packages in
British Columbia
and Chile, by its 50% share ownership
position in Chilean Metals Inc., which were spun out from Power Metallic via a plan of arrangement on February 3, 2025.
It also owns 100% of Power Metallic Arabia which owns 100% interest in the Jabul Baudan exploration license in The Kingdon of
Saudi Arabia's
JabalSaid Belt.
The property encompasses over 200 square kilometres in an area recognized for its high prospectivity for copper gold and zinc mineralization. The region is
known for its massive volcanic sulfide (VMS) deposits, including the world-class
Jabal Sayid
mine and the promising Umm and Damad deposit.
For further information, readers are encouraged to contact:
Power Metallic Mines Inc.
The Canadian Venture Building
82 Richmond St East, Suite 202
Toronto, ON
QAQC and Sampling
GeoVector Management Inc ("GeoVector") is the Consulting company retained to perform the actual drilling program, which includes core logging and sampling of
the drill core.
All samples were submitted to and analyzed at Activation Laboratories Ltd ("Actlabs"), an independent commercial laboratory for both the sample preparation and
assaying. Actlabs is a commercial laboratory independent of Power Metallic with no interest in the Nisk Project. Actlabs is an ISO 9001 and 17025 certified and
accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to
80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 μm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES - 4-Acid
near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed
using UT7 - Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation
and equipment calibration.
GeoVector's QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all
results. QAQC and data validation was performed, and no material errors were observed.
Neither the TSX Venture Exchange nor its Regulation Services Provider accepts responsibility for the adequacy or accuracy of this release.
Cautionary Note Regarding Forward-Looking Statements
This message contains certain statements that may be deemed "forward-looking statements" concerning the Company within the meaning of applicable securities
laws. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words "expects," "plans,"
"anticipates," "believes," "intends," "estimates," "projects," "potential," "indicates," "opportunity," "possible" and similar expressions, or that events or conditions
"will," "would," "may," "could" or "should" occur. Although the Company believes the expectations expressed in such forward-looking statements are based on
reasonable assumptions, such statements are not guarantees of future performance, are subject to risks and uncertainties, and actual results or realities may
differ materially from those in the forward-looking statements. Such material risks and uncertainties include, but are not limited to, among others; the timing for
various drilling plans; the ability to raise sufficient capital to fund its obligations and conduct drilling and exploration; to maintain its mineral tenures and concessions
in good standing; to explore and develop its projects; changes in economic conditions or financial markets; the inherent hazards associates with mineral
exploration and mining operations; future prices of nickel and other metals; changes in general economic conditions; accuracy of mineral resource and reserve
estimates; the potential for new discoveries; the ability of the Company to obtain the necessary permits and consents required to explore, drill and develop the
projects and if accepted, to obtain such licenses and approvals in a timely fashion relative to the Company's plans and business objectives for the applicable
project; the general ability of the Company to monetize its mineral resources; changes in environmental and other laws or regulations that could have an impact on
the Company's operations; compliance with environmental laws and regulations; dependence on key management personnel; impacts of marketing services
programs in drawing awareness to the Company; and general competition in the mining industry.
View original content to download multimedia:
https://www.prnewswire.com/news-releases/power-metallic-intercepts-5-35-meters-of-11-97-cu-16-35-cueqrec-in-hole-25-022-infill-drilling-expanding-the-lion-zone-and-updates-on-fallwinter-drill-program-and-land-assembly-302603560.html
SOURCE
Power Metallic Mines Inc.
View original content to download multimedia:
http://www.newswire.ca/en/releases/archive/November2025/04/c1014.html
%SEDAR: 00007586E
For further information:
For further information on Power Metallic Mines Inc., please contact: Duncan Roy, VP Investor Relations, 416-580-3862,
CO: Power Metallic Mines Inc.
CNW 03:00e 04-NOV-25