Group Ten Drills High-Grade Nickel Sulphide in 455 Meters of Continuous Palladium, Platinum, Rhodium, Gold, Copper, and Cobalt Mineralization at the Stillwater West Project in Montana, USA
TSX.V: PGE
OTC: PGEZF
FSE: 5D32
1
Group Ten Drills High-Grade Nickel Sulphide in 455 Meters of Continuous Palladium, Platinum,
Rhodium, Gold, Copper, and Cobalt Mineralization at the Stillwater West Project in Montana, USA
March 3, 2021 – Vancouver, BC - Group Ten Metals Inc. (TSX.V: PGE; US OTC: PGEZF; FSE: 5D32) (the “Company”
or “Group Ten”) is pleased to announce results from the 2020 drill campaign at the Chrome Mountain target area
of the Company’s flagship Stillwater West Platinum Group Element (“PGE”)-Ni-Cu-Co + Au project in Montana, USA.
Intervals from 120 to 530 meters of continuous nickel and copper sulphide mineralization, enriched in palladium,
platinum, rhodium, gold, and cobalt, were intercepted in the five drill holes starting at or near surface, with each
hole also encountering higher-grade intervals over widths of 50 to 150 meters in addition to more selective high-
grade intervals. These results further demonstrate the potential for multiple, large-scale, bulk tonnage “Platreef-
style” horizons of battery metals and PGEs within the lower Stillwater complex, based on known parallels with
South Africa’s Bushveld complex.
Work in 2020 included a five-hole, 1,822-meter (5,979 foot) drill campaign which focused on the Chrome Mountain
target area, in follow -up to the previous campaigns which focused on the HGR and Camp target areas. The
Company’s drilling to date has had the primary objectives of driving the conversion of drill -defined mineralized
zones towards formal mineral resources while also expanding areas of known mineralization at priority target areas.
2020 Chrome Mountain drill results are now being incorporated into 3D block models to progress the generation
of formal mineral resources in parallel to the work underway at the HGR and Camp target areas, with an expected
release of maiden resources for all three target areas by mid-2021.
2020 Drill Highlights:
• CM2020-04 returned strong mineralization across its entire length with 455 meters of 1.13 g/t Total Platinum
Equivalent (“TotPtEq”), or 0.25% Total Nickel Equivalent (“TotNiEq”), starting at surface with multiple well-
mineralized intervals that include two horizons of previously unidentified nickel sulphide mineralization of 8.5
meters of 8.20 g/t TotPtEq (or 1.79% TotNiEq) within a broader intercept of 54 meters of 2.58 g/t TotPtEq
(0.57% TotNiEq) and, separately, 60 meters of 2.22 g/t TotPtEq (0.48% TotNiEq).
• CM2020-05 returned strong nickel and PGE mineralization in multiple intercepts within 149 meters of 1.19 g/t
TotPtEq (0.26% TotNiEq), including 11.6 meters of 2.80 g/t TotPtEq.
• CM2020-02 returned 126 meters of 1.33 g/t TotPtEq (0.29% TotNiEq) with multiple PGE-rich intervals including
24 meters of 2.76 g/t TotPtEq (0.60% TotNiEq), 6.1 meters of 4.50 g/t TotPtEq (0.98% TotNiEq), and 15 meters
of 2.61 g/t TotPtEq (0.57% TotNiEq).
• CM2020-03 returned 122 meters of 1.27 g/t TotPtEq (0.28% TotNiEq) including 6.1 meters of 3.51 g/t TotPtEq
(0.77% TotNiEq).
• CM2020-01 returned 533 meters of 0.76 g/t TotPtEq (0.17% TotNiEq) for a total of 405 gram-meter TotPtEq
grade-thickness, starting at surface and including 130 meters of 0.96 g/t TotPtEq (0.21% TotNiEq).
• Preliminary metallurgical assessments returned strong nickel tenor in sulphides in drill holes from the 2020
campaign. Historic initial bench-scale metallurgical results completed by AMAX in the 1970s at the Camp target
area demonstrate the potential for effective nickel and copper sulphide flotation and PGE metal recovery.
Sample collection for more detailed metallurgical testing is on-going.
• Rhodium was reported in all five drill holes at potential co-product levels with grades that are comparable to
mines in South Africa. There is very little mine supply of rhodium outside of South Africa and Russia, and
persistent multi-year supply deficits have priced rhodium at more than 20x the value of platinum.
TSX.V: PGE
OTC: PGEZF
FSE: 5D32
904 – 409 Granville Street, Vancouver, British Columbia, Canada V6C 1T2
CEO Comment
Michael Rowley, President and CEO, commented, “ Our 2020 drill campaign exceeded our expectations, not only
expanding drill-defined mineralization and driving the resource modeling effort at the priority Chrome Mountain
target area , but also identifying multiple new well-mineralized horizons that feature wide intervals of battery
metals, PGEs, and gold in previously untested areas. The high-grade nickel sulphide intercepts in hole CM2020-04
are particularly exciting as they represent very high nickel tenor horizons in a new discovery that is open for
expansion. This was our first test of a fraction of the targets identified in our 77 line-kilometer 2020 IP geophysical
survey, and the success of this program is a strong demonstration of its effectiveness in targeting new discoveries
with both grade and scale. The results also speak to the extraordinary size and potential of the lower Stillwater
complex, with impressive “Platreef-style” battery metal and PGE mineralization in each hole featuring intercepts
that are hundreds of meters in width. The strategic importance of a U.S.-based large-scale battery metal asset like
Stillwater West to contribute towards the growing needs of manufacturers like Tesla while also supplying PGEs to
emerging fuel cell manufacturers in North America leverages the value of this critical resource. We look forward to
further announce ments including our plans for 2021, which we anticipate will include our largest exploration
program to date, and the delivery of maiden resource estimates, currently targeted for summer 2021.”
TABLE 1 - Highlight Drill Intercepts from the 2020 Drill Campaign at Chrome Mountain
Highlight intercepts with grade-thickness values over 25 gram-meter TotPtEq are presented above. Total Platinum Equivalent (TotPtEq g/t) and Total Nickel
Equivalent (TotNiEq %) calculations reflect total gross metal content using metals prices as follows (all USD): $6.00/lb nickel (Ni), $3.00/lb copper (Cu),
$20.00/lb cobalt (Co), $900/oz platinum (Pt), $1,650/oz palladium (Pd), $1,500/oz gold (Au), and $7,000/oz rhodium (Rh). Values have not been adjusted to
reflect metallurgical recoveries. Total metal equivalent values include both base and precious metals. Total platinum equivalent grade-thickness was
determined by multiplying the thickness (in meters) by the Total Platinum Equivalent grade (in grams/tonne) to provide gram-meter values (gram-meter) as
shown. Total nickel equivalent grade-thickness was determined by multiplying the thickness (in meters) by the Total Nickel Equivalent grade (in percent) to
provide percent-meter values as shown. Grade-thickness values have been determined across continuously mineralized intervals. Nickel equivalent values
may be converted to copper equivalent values by multiplying the NiEq value by the price ratio of the two (ie times two per the above prices), such that 0.5%
NiEq equates to 1.0% CuEq. Platinum equivalent has been used based on the historic values of platinum and palladium. Platinum equivalent values may be
converted to palladium equivalent values by multiplying the PtEq value by the price ratio of the two (ie times 0.55 per the above prices), such that 1 g/t PtEq
equates to 0.55 g/t PdEq. Intervals are reported as drilled widths and are believed to be representative of true widths.
TSX.V: PGE
OTC: PGEZF
FSE: 5D32
904 – 409 Granville Street, Vancouver, British Columbia, Canada V6C 1T2
Upcoming Events
Company Webinar - Group Ten Metals is hosting a webinar on Thursday March 4 th at 8am PST (11am EST) to discuss
results from the 2020 drill campaign and emerging plans for 2021. For more information including registration, please
click here.
PDAC 2021 - The Company will be presenting at the Prospectors & Developers Association of Canada International
Convention on March 10, 2021 in a technical session focused on the global supply of battery and platinum group metals.
More information is available here:
https://www.pdac.ca/convention/programming/technical-program/sessions/technical-program/global-supply-of-
battery-and-platinum-group-metals
Discussion
Group Ten is targeting world-class deposits of PGEs, battery metals, and gold in the famously metal-rich and
productive Stillwater mining district, where the Company is focused on the lower Stillwater complex based on
known parallels with South Africa’s Platreef district. The mines of the Platreef, on the north limb of the Bushveld
complex, are among the largest and most profitable in the world. Led by the development of Anglo American’s
Mogalakwena mines in the 1990s, the district has grown to include Ivanhoe’s Platreef mine and Platinum Group
Metals’ Waterberg project, and now hosts over 400 million ounces of PGEs and gold, and tens of billions of pounds
of nickel and copper. The massive deposits of the Platreef are attractive because their scale and grade allow the
application of mechanized bulk mining methods with resulting economies of scale and low operating costs. These
deposits contain significant quantities of both battery grade nickel and platinum group metals in a combination that
is globally very rare, and very attractive at current commodity prices.
Group Ten’s location adjacent to and stratigraphically below Sibanye-Stillwater’s J-M Reef deposit – the highest-
grade PGE deposit in the world, and the largest outside of Africa and Russia – directly parallels the setting of mines
on the Platreef, which are similarly located below the productive Merensky and UG2 Reefs in the layered
stratigraphy of the Bushveld complex. The Company’s 61-square-kilometer land position, 100% owned by Group
Ten, includes eight multi-kilometer-scale “Platreef-style” target areas in the lower Stillwater complex, and six target
areas with more conventional “Reef-type” targets.
Resource modeling of Platreef-style mineralization is now in progress at the Chrome Mountain, Camp, and HGR
target areas, driven by results from Group Ten’s 2020 and 2019 drill campaigns and more than 31,000 meters of
total drill data across the project. As shown in Figure 1, drill data in these areas delineates thick intervals of
continuous mineralization, starting at or near surface in most areas, and running from 1 to 1.5 kilometers in strike
length at each of the target areas, and occurs within broader geophysical and geochemical (metal-in-soil) anomalies.
Mineralization is open to expansion at all three targets with geophysical anomalies from ground-based IP and
airborne EM indicating significant extension potential along trend and to depth. The Company is also advancing two
other target areas with drill-defined mineralization, the Pine and Crescent target areas. The Pine target includes
drill-defined high-grade gold and PGEs within a largely untested conductive high that reaches two kilometers to the
west and is coincident with high-level metal-in-soil anomalies.
Group Ten’s 2020 drill campaign focused on the Discovery, Dunite Ridge, and Bald Hills targets in the Chrome
Mountain area, in follow-up to the previous campaign which focused on the HGR and Camp target areas. Table 1
presents a summary of continuous mineralized intervals from 2020 drill results including their corresponding grade
thickness values which are some of the highest intercepted to date in the Stillwater Complex. Grade-thickness
values are used for comparing the strength of mineralization across different mineralized widths. A grade-thickness
value of 25 gram-meter (equivalent to 1 g/t Pt over 25 meters, or 25 g/t Pt over 1 meter) or more is considered
economically significant, with the adjacent J-M Reef mines averaging approximately 34 gram-meter Pd and Pt1,2.
Values over 100 gram-meter are exceptional, highlighting the strength of the mineralized system.
Results expanded known mineralization at the advanced Discovery target area and identified multiple new
mineralized horizons to the south and southeast of Discovery that are open for expansion in subsequent campaigns.
TSX.V: PGE
OTC: PGEZF
FSE: 5D32
904 – 409 Granville Street, Vancouver, British Columbia, Canada V6C 1T2
Hole CM2020-01 expanded Hybrid Unit mineralization in the developing resource model at the Discovery target
while also targeting also deeper geophysical anomalies identified in the 2020 IP survey. Mineralization at the Hybrid
Unit is now defined by eleven drill holes at the Discovery target that delineate a mineralized zone of a type not
identified previously in the Stillwater Complex, but known at the Platreef (see December 17, 2018 and February 21,
2019 news releases). Mineralized over its entire 533-meter length, CM2020-01 returned an impressive 404.6 gram-
meter TotPtEq total grade-thickness. High-grade platinum values are demonstrated over shorter intervals, with
wide intervals such as 9.8 meters at 0.51 g/t Pt demonstrating size. The Pt:Pd ratio is platinum-rich in hole CM2020-
01, which is unusual for the normally palladium-rich Stillwater complex. CM2020-01 also returned high-grade gold
with 2.44 meters at 2.49 g/t Au starting at 6.1 meters.
Holes CM2020-02 and 03 targeted high-grade PGE mineralization seen in surface samples and supported by other
work, while also targeting deeper geophysical anomalies identified in the 2020 IP survey. Both holes returned
higher-grade mineralization across more than 120 meters starting near surface, while also returning PGE-rich
intervals within previously unidentified nickel and copper sulphide horizons. Robust battery metal grades were also
noted in shorter intervals in CM2020-02, including 4.1 meters of 0.81% NiEq (as 0.58% Ni, 0.17% Cu, and 0.042%
Co), plus PGEs totaling 1.12 g/t PtEq, starting at 60.8 meters. Multiple intervals demonstrated attractive nickel
tenor with >3.4% Ni in sulphides reported in preliminary work.
CM2020-04 was completed mid-way between Discovery and Dunite Ridge to test an undrilled portion of a large
and continuous IP anomaly identified in the 2020 IP survey, as corroborated by coincident anomalies in earlier work.
The hole is an offset of historic hole 355-49, drilled by AMAX in 1973, which was a 227-meter vertical hole that
returned increasing nickel and copper results downhole with limited assay data. CM2020-04 returned impressive
precious and base metal mineralization across its entire length, starting at surface and including two very
compelling intervals of nickel-rich sulphides with important potential co-product grades of palladium, platinum,
gold, rhodium, copper, and cobalt. High-grade gold, palladium, nickel, and cobalt were also reported over shorter
intervals in CM2020-04.
With an impressive 515.4 gram-meter TotPtEq grade-thickness, CM2020-04 ranks as one of the best mineralized
intercepts ever drilled in the Stillwater district, second to 517.7 gram-meter TotPtEq in hole IM2019-03, which was
drilled over 7km to the west at the HGR target at Iron Mountain in Group Ten’s 2019 drill campaign.
CM2020-05, completed in the Bald Hills target area, targeted mineralization that was identified in the 2020 IP
survey and corroborated with coincident anomalies in earlier work. The hole returned strong nickel and PGE
mineralization in multiple intercepts that include the identification of a new PGE-rich horizon with rhodium values
of 0.083 g/t over 11.6 meters that are comparable to mine grades in South Africa’s Platreef district and equivalent
to >1.6 g/t Pt at current spot prices. This interval also returned a near-balanced Pt:Pd ratio with 0.41 g/t Pt and 0.54
g/t Pd, which is a departure from the normally palladium-rich values seen at Stillwater. High-grade battery metals
were also noted in CM2020-05, and several intervals returned good nickel tenor of the sulphides, with values over
3% Ni in preliminary analysis.
About Stillwater West and East
The Stillwater West and East PGE-Ni-Cu-Co + Au projects position Group Ten as the second-largest landholder in
the Stillwater Complex, adjoining and adjacent to Sibanye-Stillwater’s Stillwater, East Boulder, and Blitz PGE mines
in south-central Montana, USA1. The Stillwater Complex is recognized as one of the top regions in the world for
PGE-Ni-Cu-Co mineralization, alongside the Bushveld Complex and Great Dyke in southern Africa, which are similar
layered intrusions. The J-M Reef, and other PGE-enriched sulphide horizons in the Stillwater Complex, share many
similarities with the highly prolific Merensky and UG2 Reefs in the Bushveld Complex. At the same time, the lower
part of the Stillwater Complex also shows the potential for much larger scale disseminated and high-sulphide PGE-
Ni-Cu-Co deposits, similar to the Platreef in the Bushveld Complex3. Group Ten’s Stillwater projects cover the lower
part of the Stillwater Complex along with the Picket Pin PGE Reef-type deposit in the upper portion and includes
extensive historic data, including soil and rock geochemistry, geophysical surveys, geologic mapping, and historic
drilling.
TSX.V: PGE
OTC: PGEZF
FSE: 5D32
904 – 409 Granville Street, Vancouver, British Columbia, Canada V6C 1T2
About Group Ten Metals Inc.
Group Ten Metals Inc. is a TSX-V-listed Canadian mineral exploration company focused on the development of high-
quality platinum, palladium, nickel, copper, cobalt, and gold exploration assets in top North American mining
jurisdictions. The Company’s core asset is the Stillwater West PGE-Ni-Cu-Co + Au project adjacent to Sibanye-
Stillwater’s high-grade PGE mines in Montana, USA. Group Ten also holds the high-grade Black Lake-Drayton Gold
project adjacent to Treasury Metals’ development-stage Goliath Gold Complex in northwest Ontario, and the
Kluane PGE-Ni-Cu-Co project on trend with Nickel Creek Platinum‘s Wellgreen deposit in Canada‘s Yukon Territory.
About the Metallic Group of Companies
The Metallic Group is a collaboration of leading precious and base metals exploration companies, with a portfolio
of large, brownfield assets in established mining districts adjacent to some of the industry’s highest-grade
producers of silver and gold, platinum and palladium, and copper. Member companies include Metallic Minerals in
the Yukon’s high-grade Keno Hill silver district and La Plata silver-gold-copper district of Colorado, Group Ten Metals
in the Stillwater PGM-nickel-copper district of Montana, and Granite Creek Copper in the Yukon’s Minto copper
district. The founders and team members of the Metallic Group include highly successful explorationists formerly
with some of the industry’s leading explorers/developers and major producers. With this expertise, the companies
are undertaking a systematic approach to exploration using new models and technologies to facilitate discoveries
in these proven, but under-explored, mining districts. The Metallic Group is headquartered in Vancouver, BC,
Canada, and its member companies are listed on the Toronto Venture, US OTC, and Frankfurt stock exchanges.
TSX.V: PGE
OTC: PGEZF
FSE: 5D32
904 – 409 Granville Street, Vancouver, British Columbia, Canada V6C 1T2
TSX.V: PGE
OTC: PGEZF
FSE: 5D32
904 – 409 Granville Street, Vancouver, British Columbia, Canada V6C 1T2
TSX.V: PGE
OTC: PGEZF
FSE: 5D32
904 – 409 Granville Street, Vancouver, British Columbia, Canada V6C 1T2