Pacific Ridge's Inaugural Drill Program Returns Some of the Best Drill Results Ever Recorded at the Chuchi Copper-Gold Project
Pacific Ridge's Inaugural Drill Program
Returns Some of the Best Drill Results Ever
Recorded at the Chuchi Copper-Gold Project
Vancouver, British Columbia--(Newsfile Corp. - November 25, 2024) - Pacific Ridge Exploration Ltd.
(TSXV: PEX) (OTCQB: PEXZF) (FSE: PQWN) ("Pacific Ridge" or the "Company") is pleased to
announce that the Company's inaugural drill program at the Chuchi copper-gold project ("Chuchi" or the
"Project") returned some of the best drill results ever recorded at the Project. Further, the results suggest
that drilling encountered the upper part of a large porphyry copper-gold system that has not been
adequately tested and remains open laterally and to depth. Chuchi is road accessible and is located 35
km to the northwest of Centerra Gold Inc.'s ("Centerra") Mount Milligan Mine in British Columbia (see
Figure 1).
Highlights:
Pacific Ridge completed 2,716 m in five diamond drill holes (CH-24-070 to CH-24-074) over a
750 m strike length across the BP Zone ("BPZ").
Every drill hole intersected alkalic porphyry copper-gold mineralization consisting of chalcopyrite
and pyrite hosted in breccias, veins and as disseminated mineral replacements.
Of the 89 historical drill holes completed at Chuchi, only one historical drill hole, drill hole CH-91-
42, returned higher copper-gold equivalent values over the length of a mineralized intersection. The
next four best were completed by Pacific Ridge (see Table 1). Further, drill hole CH-24-070
encountered the deepest mineralization to date at 420 m vertical depth (See Table 2).
Drill hole CH-24-073 returned 65.0 m of 0.42% copper equivalent ("CuEq
1
") or 0.63 g/t gold
equivalent ("AuEq
2
") (0.31% copper, 0.16 g/t gold, and 0.69 g/t silver) within 382.0 m of 0.27%
CuEq
1
or 0.41 g/t AuEq
2
(0.19% copper, 0.12 g/t gold, and 0.47 g/t silver)(See Table 2).
The last hole of the program, drill hole CH-24-074, was drilled near the interpreted centre of the
system. The last 51.0 m returned 0.33% CuEq
1
or 0.48 g/t AuEq
2
(0.22% copper, 0.15 g/t gold,
and 0.49 g/t silver)(See Table 2). A subtle increase in copper-gold grade with depth, metal ratio
signature, and highest MPIx ("MDRU Porphyry Index") value of the program, suggests a vector
towards a porphyry core.
BPZ is just one of several porphyry targets that occur within a six-kilometre-long porphyry trend,
and it remains open laterally and to depth (see Figure 2).
The program revealed there are at least two mineralized porphyritic intrusions at Chuchi, one in
BPZ and another in the Digger Zone. Both are open laterally and at depth, and the Company
believes these represent the upper part of a large porphyry copper-gold system (see Figure 3).
Chuchi is a two-hour drive from Fort St. James and the 2024 drill program was completely ground-
supported.
Quote
"Pacific Ridge's inaugural drill program at Chuchi was designed to test areas that historically returned
the best copper and gold values,"
said Blaine Monaghan, President and CEO of Pacific Ridge.
"Not
only did we return some of the highest copper and gold values ever recorded at Chuchi, and over
longer runs, the results suggest that there is greater continuity of mineralization across the BP Zone
than previously known. The results also suggest that we are in the upper part of a large porphyry
copper-gold system that has not been adequately tested and remains open laterally and to depth."
Table 1
Chuchi Drilling Highlights (Shaded Rows are Pacific Ridge's 2024 Drilling Results)
Drill hole
From (m)
To (m)
Width (m)
Cu (%)
Au (g/t)
Ag (g/t)
CuEq (%)
1
AuEq (g/t)
2
CH-91-42
91.4
320.6 Ɨ
229.2
0.10
0.61
NA
0.51
0.76
CH-24-070
59.0
479.9
420.9
0.15
0.15
0.43
0.26
0.38
CH-24-073
143.0
525.0
382.0
0.19
0.12
0.47
0.27
0.41
CH-24-072
7.0
481.0
474.0
0.12
0.12
0.56
0.21
0.31
CH-24-074
49.8
348.0 Ɨ
298.2
0.21
0.11
0.51
0.29
0.43
CH-90-27
24.0
288.0
264.0
0.18
0.18
0.68
0.31
0.45
CH-90-33
39.6
304.5 Ɨ
264.9
0.20
0.12
0.44
0.29
0.42
CH-90-37
54.3
262.1 Ɨ
207.8
0.22
0.12
0.56
0.31
0.45
CH-91-40
46.0
203.6
157.6
0.21
0.19
NA
0.34
0.50
CH-89-07
38.0
138.0
100.0
0.27
0.34
1.31
0.51
0.76
Table 2
2024 Chuchi Drilling Results
Hole No.
From (m)
To (m)
Width (m)
Cu (%)
Au (g/t)
Ag (g/t)
CuEq (%)
1
AuEq (g/t)
2
CH-24-070
66.0
479.9
413.9
0.15
0.15
0.43
0.26
0.38
includes
66.0
169.0
103.0
0.19
0.20
0.61
0.32
0.48
and
358.0
459.0
101.0
0.19
0.16
0.39
0.30
0.45
CH-24-071
54.0
172.0
118.0
0.17
0.17
0.57
0.28
0.42
includes
107.0
129.0
22.0
0.26
0.22
0.91
0.41
0.61
CH-24-072
7.0
481.0
474.0
0.12
0.12
0.56
0.21
0.31
includes
7.0
77.0
70.0
0.15
0.14
0.73
0.25
0.36
and
198.0
234.0
36.0
0.26
0.32
1.26
0.48
0.72
and
411.0
481.0
70.0
0.16
0.14
0.64
0.26
0.38
CH-24-073
143.0
525.0
382.0
0.19
0.12
0.47
0.27
0.41
includes
143.0
243.0
100.0
0.26
0.14
0.58
0.36
0.54
includes
143.0
208.0
65.0
0.31
0.16
0.69
0.42
0.63
and
425.0
525.0
100.0
0.25
0.16
0.66
0.37
0.54
CH-24-074
49.8
348.0 Ɨ
298.2
0.21
0.11
0.51
0.29
0.43
includes
49.8
171.0
121.2
0.23
0.08
0.55
0.29
0.42
and
189.0
348.0 Ɨ
159.0
0.21
0.14
0.49
0.31
0.45
includes
297.0
348.0 Ɨ
51.0
0.22
0.15
0.49
0.33
0.48
1
CuEq = ((Cu%) x $Cu x 22.0462) + (Au(g/t) x AuR/CuR x $Au x 0.032151) + (Ag(g/t) x AgR/CuR x $Ag x 0.032151)) / ($Cu x 22.0462).
2
AuEq = ((Au(g/t) x $Au x 0.032151) + ((Cu%) x CuR/AuR x $Cu x 22.0462) + (Ag(g/t) x AgR/CuR x $Ag x 0.032151)) / ($Au x 0.032151).
Commodity prices:
$Cu = US$3.25/lb, $Au = US$1,800/oz., and Ag = US$20.00/oz.
NA = not analyzed
Ɨ
End of hole
T
here has been no metallurgical testing on Chuchi mineralization. The Company estimates copper recoveries (CuR) of 84%, gold recoveries
(AuR) of 70%
and silver recoveries (AgR) of 65% based on the average recoveries from Kemess Underground, Mount Milligan, and Red Chris.
Factors: 22.0462 = Cu% to lbs per tonne and 0.032151 = Au g/t to troy oz per tonne.
Sources include: Chuchi project historical drilling database; also reported in BC Geological Survey (Branch) Assessment Reports 20018 (CH-89-
7), 21113 (CH-90-27,
CH-90-33, CH-90-37), unpublished Placer Dome Inc. database (CH-91-40, CH-91-42).
The Company has not independently
validated all historic work, and the reader is cautioned about its accuracy.
Figure 1
Location of Chuchi and Pacific Ridge's Other Copper-Gold Porphyry Projects
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5460/231237_40594d3f54d6a843_001full.jpg
Figure 2
Six-Kilometre-Long Porphyry Trend, From Coho to Klaw Zone, at Chuchi
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5460/231237_40594d3f54d6a843_002full.jpg
Figure 3
Interpretation of BPZ-Digger Porphyry System at Chuchi, Looking Southward
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5460/231237_40594d3f54d6a843_003full.jpg
2024 Chuchi Drilling Program Results
Pacific Ridge completed 2,716 m in five diamond drill holes over a 750 m strike length across BPZ (see
Figures 4 and 5). The program was designed to test areas of best historical drilling results for copper
("Cu") and gold ("Au") to determine their accuracy; and to test an updated exploration model for BPZ
based on combined 3D geophysical inversion models (ZTEM and IP), a CuEq
1
grade shell model of
historical drilling, and compiled historical work.
Four of the five drill holes are among the best-ever recorded at Chuchi, which suggests that historical
drilling results are reliable and that there is greater continuity of mineralization across BPZ than
previously known. The best-ever drilling result from CH-91-42 (See Table 1) appears to have drilled
epithermal gold style mineralization in a lithocap root zone (see
Upper Part of a Porphyry System
section below).
The program revealed there are two porphyritic stocks, one in BPZ and another farther northeast in
Digger Zone (see Figure 3). Both are open laterally and at depth, and the Company believes these
represent the upper part of a large porphyry copper-gold system. Sulfide (chalcopyrite-pyrite)
mineralization appears to dip moderately-steeply westward, following a NE-trending corridor centered
on the North Central ("NC") fault zone (see Figures 3 and 4), particularly on its western side. Faulted,
brecciated and calc-potassic altered lithological contact zones at the margin of porphyry stocks were
identified as areas of strongest mineralization.
Drill hole CH-24-070 encountered the deepest mineralization to date at 420 m vertical depth, with 101 m
of 0.30% CuEq
1
and 0.45 g/t AuEq
2
(0.19% Cu, 0.16 g/t Au, and 0.39 g/t Ag) from 358.0-459.0 m (see
Table 2). It was drilled steeply to the east, resulting in drilling out of the west-dipping BPZ stock
mineralization halo at depth, helping to confirm the west dip of mineralization. The previous deepest
drilled copper-gold mineralization was in CH-19-0003 at 390 m vertical depth in Digger Zone.
CH-24-072 encountered copper-gold mineralization at 250 m greater depth than pre-existing proximal
drill holes (Figure 5), extending the grade shell in southwestern BPZ. Both CH-24-070 and CH-24-072
indicate that BPZ stock is mineralized throughout, returning long runs of breccia-hosted porphyry
mineralization including 413.9 m of 0.26% CuEq
1
and 0.38 g/t AuEq
2
in CH-24-070 and 474.0 m of
0.21% CuEq
1
and 0.31 g/t AuEq
2
in CH-24-072 (see Table 2). CH-24-073 indicates BPZ stock copper-
gold mineralization halo continues into the stock footwall and a magnetite breccia zone.
The last hole of the program, CH-24-074, was drilled near the interpreted centre of the system, based on
the preceding holes and historical drilling grade shell model (see Figure 3), and was shut down in
mineralization at 348 m due to budgetary constraints. The bottom 51.0 m returned 0.33% CuEq
1
or 0.48
g/t AuEq
2
(0.22% Cu, 0.15 g/t Au, and 0.49 g/t Ag) within 298.2 m of 0.29% CuEq
1
or 0.43 g/t AuEq
2
(0.21% Cu, 0.11 g/t Au, and 0.51 g/t Ag). The subtle increase in copper-gold grade with depth, metal
ratio signature (Au:Cu < 0.70 and Ag:Cu < 2.5) and highest MPIx value of 10.05, may provide a vector
towards a porphyry core.
Figure 4
2024 BPZ Drill Holes in Plan View With 3D ZTEM Model in Background
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5460/231237_40594d3f54d6a843_004full.jpg
Figure 5
2024 Chuchi Drilling With 3D ZTEM Model in Background (550 m Wide Slice) and TMI Magnetics on
Surface
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5460/231237_40594d3f54d6a843_005full.jpg
Two Porphyry Stocks
Results of the 2024 Chuchi drilling program suggest there are two porphyry stocks: a composite
monzodiorite porphyry in BPZ and a monzonite porphyry in Digger Zone. These two porphyry centres are
separated by ~500 m along a northeast trend defined by the NC Fault corridor. The BPZ monzodiorite
stock spatially coincides with a 550 m (E-W) x 500 m (N-S) x 600 m (depth) ZTEM conductivity low
feature that dips moderately-steeply (60°) to the southwest. The Digger monzonite stock is nearly
masked by conductors in the geophysical models but was intersected for 57 m at the end of CH-24-073
and appears to be ~200 m wide in the DC resistivity model with similar dip orientation as the BPZ stock
(see Figure 3). The copper-gold mineralized halos around these porphyry stocks are 100 m wide with
nearly identical weighted average grades of 0.36-0.37% CuEq
1
and 0.54 g/t AuEq
2
, as approximated
by CH-24-073 (see Table 2) which drilled to the northeast from BPZ porphyry into the Digger porphyry at
depth.
Upper Part of a Porphyry System
Relogging of historical drill hole CH-91-42, which returned 229.2 m of 0.10% Cu and 0.61 g/t Au starting
from 91.4 m (see Table 1), indicates a monzonite porphyry host rock similar to that encountered at
greater depth in CH-24-073 (see Figure 3). It is strongly quartz-sericite-clay-calcite altered with a
bleached appearance. Straight-walled quartz-pyrite veins and breccia returned grades up to 25.1 g/t Au
(112-114 m) within 50 m of 0.09% Cu and 2.10 g/t Au from 94.0 m. The interpretation from relogging is
that this represents a lithocap root zone. The down-plunge distance from this lithocap root to the Digger
porphyry mineralization drilled in CH-24-073 is 280 m. If lithocap root zones are generally ~1 km above
the porphyry core as suggested by the Sillitoe model for a telescoped porphyry copper system (2010),
then the widespread copper-gold mineralization at Chuchi would represent the upper part of the porphyry
system. Deepest drilling to date is to ~530 m vertical depth below surface in CH-24-070 and CH-24-
071.
This evidence aligns with the interpretation that BPZ-Digger, being hosted in Early Jurassic volcano-
sedimentary rocks of the Chuchi Lake succession, is several 100 m above the unconformable contact
with Late Triassic volcanic rocks of the Takla Group (Witch Lake succession) and the best stratigraphic
location for a porphyry core. This uses the nearby Mount Milligan porphyry Cu-Au deposit as an
analogue, which is hosted in the Witch Lake succession rocks.
About Chuchi
Chuchi is over 160 km
2
in size and comprises three mineral tenure blocks, Chuchi, under option from a
subsidiary of Centerra, and Chuchi South and Chuchi West, under option from American Copper
Development Corporation (ACDX: TSXV) and a private individual. Chuchi is road accessible and is
located 35 km northwest of Centerra's Mount Milligan Mine. The Project has seen less than 15,360
metres (89 drill holes) of historical drilling to an average vertical depth of 140 m. Most of this drilling was
completed in 1989-1991. Chuchi hosts several compelling exploration targets within a six-kilometre-long
porphyry trend, including BPZ. The Company believes that Chuchi has significant untested potential for
porphyry copper-gold mineralization at depth as many of the historic drill holes were shallow and ended
in mineralization. Further, the porphyry core has yet to be identified.
QA/QC (Quality Assurance/Quality Control)
Pacific Ridge's 2024 exploration program was managed by Equity Exploration Consultants Ltd. of
Vancouver, B.C. The drill contractor was Dorado Drilling Ltd. of Vernon, B.C. Half-core NQ (47.6 mm)
sawed samples from continuous intervals throughout the reported drill holes were sealed on site and
shipped to ALS Global Laboratories ("ALS") preparation lab in Terrace, BC or North Vancouver, BC.
Fire assay and multielement analyses were completed at ALS Minerals analytical laboratory in North
Vancouver. Drill core was crushed, pulverized and analyzed for 48 elements using a four-acid dissolution
followed by ICP-MS (ME-MS61) with over limits by ore grade four-acid dissolution followed by ICP-AES
(OG62), with a 30 g sample analyzed for gold by fire assay and atomic absorption finish (Au-AA23).
Blanks and commercially certified reference materials were inserted blind into the sample stream with
an overall insertion rate of 8%. Crush duplicates were inserted at 2.5%. Pulp and crush duplicates are
inserted at 5% insertion rate by the laboratory. The QAQC results are reviewed as batches are returned
from the laboratory and appropriate actions are implemented where required. The QA/QC results for the
reported drill holes are acceptable.
About Pacific Ridge
Our goal is to become B.C.'s leading copper-gold exploration company. Pacific Ridge's flagship asset
is its 100% owned Kliyul copper-gold project, located in the Quesnel terrane close to existing
infrastructure. In addition to Kliyul, the Company's project portfolio also includes the Chuchi copper-gold
project, the 100% owned RDP copper-gold project, the 100% owned Onjo copper-gold project, and the
100% owned Redton copper-gold project, all located in British Columbia. The Company would like to
acknowledge that its B.C. projects are located in the traditional, ancestral and unceded territories of the
Gitxsan Nation, McLeod Lake Indian Band, Nak'azdli Whut'en, Takla Nation, and Tsay Keh Dene Nation.
On behalf of the Board of Directors,
"Blaine Monaghan"
Blaine Monaghan
President & CEO
Pacific Ridge Exploration Ltd.
Investor Relations:
Tel: (604) 687-4951
Email:
Website:
www.pacificridgeexploration.com
LinkedIn:
https://www.linkedin.com/company/pacific-ridge-exploration-ltd-pex-/
Twitter:
https://twitter.com/PacRidge_PEX
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
The technical information contained within this News Release has been reviewed and approved by
Danette Schwab, P.Geo., Vice President Exploration, and a Qualified Person as defined by National
Instrument 43-101 policy.
Forward-Looking Information:
This release includes certain statements that may be deemed
"forward-looking statements". All statements in this release, other than statements of historical facts,
which address exploration drilling and other activities and events or developments that Pacific Ridge
Exploration Ltd. ("Pacific Ridge") expects to occur, are forward-looking statements. Although Pacific
Ridge believes the expectations expressed in such forward-looking statements are based on
reasonable assumptions, such statements are not guarantees of future performance and actual
results or developments may differ materially from those forward-looking statements. Factors that
could cause actual results to differ materially from those in forward-looking statements include market
prices, exploration successes, and continued availability of capital and financing and general
economic, market or business conditions. These statements are based on a number of assumptions
including, among other things, assumptions regarding general business and economic conditions,
that one of the options will be exercised, the ability of Pacific Ridge and other parties to satisfy stock
exchange and other regulatory requirements in a timely manner, the availability of financing for
Pacific Ridge's proposed programs on reasonable terms, and the ability of third party service
providers to deliver services in a timely manner. Investors are cautioned that any such statements are
not guarantees of future performance and actual results or developments may differ materially from
those projected in the forward-looking statements. Pacific Ridge does not assume any obligation to
update or revise its forward-looking statements, whether because of new information, future events or
otherwise, except as required by applicable law.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/231237