Pecoy Copper Adds Third Broad South Breccia Intercept; Northwest Returns 42.3 Metres at 1.01% Cu Near Surface and Expands Mineralized Footprint PEC26-072 intersects 804.0 metres at 0.34% Cu and 0.08 g/t Au from 24.0 metres, including 485.2 metres at 0.40% Cu
Pecoy Copper Adds Third Broad South Breccia Intercept; Northwest Returns
42.3 Metres at 1.01% Cu Near Surface and Expands Mineralized Footprint
PEC26-072 intersects 804.0 metres at 0.34% Cu and 0.08 g/t Au from 24.0 metres, including 485.2 metres at 0.40% Cu
and 0.09 g/t Au; PEC26-067 intersects 209.0 metres at 0.40% Cu from 15.0 metres
VANCOUVER, British Columbia, Sept. 01, 2026 -- Pecoy Copper Corp. (“Pecoy Copper ” or the “Company”) (TSXV: PCU;
FSE: D5E; OTCQB: PCUUF) is pleased to report new assay results from six diamond drill holes, PEC26-067 through PEC26-
072, completed as part of the Company’s planned 35,000-metre 2026 drill program at its 100%-owned Pecoy Copper-Gold-
Molybdenum-Silver Project in southern Peru. The six holes totalled 5,678.3 metres and tested the South Breccia, Northwest,
Centre-of-Pit and North-Central target areas.
Results are led by PEC26-072, which adds a third broad copper-gold intercept at South Breccia. The hole intersected 804.0
metres grading 0.34% Cu, 0.08 g/t Au, 1.19 g/t Ag and 0.007% Mo from 24.0 metres. This includes 485.2 metres grading
0.40% Cu, 0.09 g/t Au, 1.36 g/t Ag and 0.007% Mo from 244.8 metres , including 100.8 metres grading 0.56% Cu and
0.13 g/t Au from 608.5 metres.
PEC26-072 was collared approximately 166 metres west of PEC25-066 and approximately 360 metres west of PEC25-065.
Together with the previously reported PEC25-065 and PEC25-066 results, PEC26-072 provides a third broad South Breccia
intercept and supports the interpretation of lateral continuity and westward expansion potential. Additional drilling and three-
dimensional modelling are required to determine continuity and true thickness between the holes.
Outside the South Breccia, PEC26-067 returned the strongest near-surface copper result in this batch, intersecting 209.0
metres at 0.40% Cu from 15.0 metres. The interval includes 137.0 metres at 0.50% Cu, 42.3 metres at 1.01% Cu and 11.1
metres at 1.90% Cu. Below the existing resource pit shell, a separate deeper interval returned 296.0 metres at 0.24% Cu and
0.009% Mo from 744.0 metres to the end of the hole. The combination of shallow grade and width, together with the separate
deeper interval, makes Northwest a principal follow-up and expansion target.
Drilling Highlights:
• South Breccia – PEC26-072
◦ 804.0 m at 0.34% Cu and 0.08 g/t Au from 24.0 m, incl.;
◦ 485.2 m at 0.40% Cu and 0.09 g/t Au from 244.8 m, incl.;
◦ 100.8 m at 0.56% Cu and 0.13 g/t Au from 608.5 m, incl;
◦ 52.0 m at 0.67% Cu and 0.10 g/t Au from 656.0 m
• Northwest – PEC26-067 returned the strongest near-surface copper result outside South Breccia in this batch:
◦ 209.0 m at 0.40% Cu from 15.0 m, incl.;
◦ 137.0 m at 0.50% Cu from 15.0 m, incl.;
◦ 42.3 m at 1.01% Cu from 33.7 m, incl.;
◦ 11.1 m at 1.90% Cu from 58.0 m.
◦ A separate deeper interval below the historical pit shell returned 296.0 m grading 0.24% Cu and 0.009% Mo from
744.0 m to 1,040.0 m end of hole;
• Centre of the Pit – PEC26-069
◦ 119.0 m at 0.30% Cu from 29.0 m, including 58.1 m at 0.40% Cu and 22.0 m at 0.50% Cu.
• Centre of the Pit – PEC26-071
◦ 101.4 m at 0.34% Cu from 130.0 m, including 52.0 m at 0.42% Cu.
Vincent Metcalfe, President and Chief Executive Officer of Pecoy Copper, commented: “PEC26-072 adds a third broad copper-
gold intercept at South Breccia, which has now delivered broad mineralization from three separate collar locations and
continues to demonstrate expansion potential to the west. Just as importantly, PEC26-067 returned 209 metres at 0.40%
copper from only 15 metres, including 50 metres at 0.91% copper and 11.1 metres at 1.90% copper. That combination of
shallow position, width and grade, together with the separate deeper interval, expands the known mineralized extent at
Northwest and makes it a compelling second priority.
With assay results received to date representing only approximately 20% of our planned 35,000-metre program, we remain at
an early stage and expect the substantial drilling and results ahead to significantly advance our understanding of Pecoy. We
will prioritize the lateral expansion of South Breccia and follow-up drilling at Northwest while integrating the Centre-of-Pit and
North-Central results into our three-dimensional model.”
Table 1: Selected Drill Intersections
Hole From (m) To (m) Length (m) Cu % Au g/t Mo % Ag g/t
PEC26-067 3.0 352.0 349.0 0.30 0.02 0.011 1.18
incl. 15.0 224.0 209.0 0.40 0.02 0.011 1.32
incl. 32.0 82.0 50.0 0.91 0.03 0.014 2.67
Incl. 33.7 76.0 42.3 1.01 0.03 0.015 2.92
incl. 58.0 69.1 11.1 1.90 0.05 0.019 5.40
Below historical pit shell
and 744.0 1040.0 296.0 0.24 0.02 0.009 0.74
PEC26-068 303.9 474.0 170.1 0.25 0.03 0.013 0.76
incl. 330.0 420.0 90.0 0.30 0.03 0.011 0.87
incl. 332.0 352.0 20.0 0.42 0.04 0.013 1.11
PEC26-069 29.0 148.0 119.0 0.30 0.02 0.006 0.73
incl. 48.0 134.0 86.0 0.34 0.02 0.005 0.80
incl. 53.9 112.0 58.1 0.40 0.02 0.005 0.91
incl. 70.0 92.0 22.0 0.50 0.03 0.004 1.12
PEC26-070 424.0 769.0 345.0 0.25 0.02 0.008 0.84
incl. 497.35 692.0 194.65 0.30 0.02 0.011 1.03
incl. 517.0 600.0 83.0 0.34 0.03 0.013 1.22
PEC26-071 130.0 231.4 101.4 0.34 0.01 0.002 0.62
incl. 140.0 192.0 52.0 0.42 0.01 0.002 0.63
PEC26-072 24.0 828.0 804.0 0.34 0.08 0.007 1.19
incl. 244.8 730.0 485.2 0.40 0.09 0.007 1.36
incl. 574.9 725.0 150.1 0.49 0.10 0.012 1.89
incl. 608.5 709.3 100.8 0.56 0.13 0.014 2.29
incl. 656.0 708.0 52.0 0.67 0.10 0.020 2.09
incl. 686.0 708.0 22.0 0.82 0.10 0.031 2.65
and 456.0 466.0 10.0 0.93 0.25 0.004 2.80
Note: Reported intervals represent downhole lengths; true thicknesses have not yet been determined. Grades are length-
weighted averages. Internal lower-grade intervals are included. The 0-to-EOH rows are provided solely as whole-hole context
and should not be interpreted as continuous mineralized intersections. Values may not sum exactly due to rounding.
Exploration Interpretation and Next Steps
The six holes tested several areas across Pecoy, with the objective of expanding South Breccia, identifying additional near-
surface copper mineralization, deeper mineralized packages and improving the Company’s understanding of the broader
system. The results reinforce South Breccia and establish Northwest as leading follow-up priorities, while providing additional
mineralized intercepts in the Centre-of-Pit and North-Central areas.
South Breccia – PEC26-072
PEC26-072 intersected 804.0 metres grading 0.34% Cu and 0.08 g/t Au from 24.0 metres, including 485.2 metres grading
0.40% Cu and 0.09 g/t Au and 100.8 metres grading 0.56% Cu and 0.13 g/t Au.
The hole was collared approximately 166 metres west of PEC25-066 and adds a third broad copper-gold intercept across
South Breccia. Together, PEC25-065, PEC25-066 and PEC26-072 returned broad copper-gold intervals at three separate collar
locations across South Breccia, supporting the interpretation of lateral continuity and identifying the westward direction as a
priority for further testing.
Geological logging records extensive alteration, veining, sulphide mineralization and multiple phases of brecciation, consistent
with a large hydrothermal system. Together with the assay results, these observations provide an important new point for
evaluating South Breccia’s scale, geometry and western extent.
Additional drilling and three-dimensional modelling will be required to determine continuity and true thickness between the
three holes.
Northwest – PEC26-067
PEC26-067 returned the strongest near-surface copper result outside South Breccia in this batch: 209.0 metres at 0.40% Cu
from 15.0 metres, including 137.0 metres at 0.50% Cu, 50.0 metres at 0.91% Cu and 11.1 metres at 1.90% Cu. A separate
deeper interval returned 296.0 metres at 0.24% Cu and 0.009% Mo from 744.0 metres to the end of the 1,040.0-metre hole.
Together, the shallow and deeper intervals extend known mineralization at Northwest from near surface and separately well
below the historical resource pit shell. These results materially increase the exploration significance of Northwest and
establish a clear opportunity for lateral expansion. Follow-up drilling will test the mineralization along strike and across the
target while defining its geometry and continuity.
North-Central – PEC26-070
PEC26-070 returned 345.0 metres grading 0.25% Cu from 424.0 metres, including 194.65 metres grading 0.30% Cu and 83.0
metres grading 0.34% Cu. Logging identified alteration, veining, sulphide mineralization and brecciation throughout the
mineralized interval.
The result confirms a broad mineralized interval at depth in the less-explored North-Central area. Further work will evaluate
whether it represents an extension of an existing zone or a separate mineralized domain.
Centre-of-Pit and Other Results – PEC26-068, PEC26-069 and PEC26-071
PEC26-069 and PEC26-071 returned near-surface copper intervals at separate locations within the Centre-of-Pit area, while
PEC26-068 returned 170.1 metres at 0.25% Cu from 303.9 metres and encountered hydrothermal brecciation near the bottom
of the hole. These results provide additional pierce points for three-dimensional modelling and target vectoring. Further drilling
is required to determine whether the intervals belong to continuous domains or separate structurally controlled zones.
Logging across PEC26-068 through PEC26-071 records altered, veined and locally brecciated intrusive rocks associated with
sulphide mineralization. These geological observations support a hydrothermal origin and help refine follow-up targeting, but do
not, by themselves, demonstrate a geological connection between target areas.
Several of the reported intervals occur within or adjacent to areas previously represented as lower-grade, peripheral or
unestimated in the historical resource model. If additional drilling demonstrates sufficient continuity, these areas may provide
opportunities for future resource growth and improved pit geometry.
Overall Exploration Implications
The results provide three clear priorities for the next phase of work:
1. Continue evaluating the scale and lateral extension of the South Breccia, where three widely spaced holes have now
returned broad copper-gold intercepts.
2. Follow up Northwest, where PEC26-067 encountered strong copper mineralization beginning near surface together with
a separate mineralized interval at depth.
3. Use the results from PEC26-068 through PEC26-071 to refine the geological model and assess the potential for
additional near-surface and deeper mineralized zones across the broader Pecoy system.
The six holes show that copper mineralization occurs across multiple target areas. The results do not establish that the
separate target areas form one continuous mineralized body. They strengthen South Breccia, establish a compelling second
priority in the Northwest sector and provide additional targets for future geological and resource evaluation across Pecoy.
Broad Copper Composites for Geological Context
Each of the six holes contains at least one broad sample-boundary composite with an unrounded length-weighted copper
grade of at least 0.20% Cu. These contextual composites demonstrate the broad distribution of copper mineralization at the
tested locations. They do not establish continuity between holes, inclusion within the current mineral resource or economic
viability.
Table 2: Longest Sample-Boundary Composite Averaging at Least 0.20% Cu
Hole From (m) To (m) Length (m) Cu % Au g/t Mo % Ag g/t
PEC26-067 0.0 1,040.0 1,040.0 0.23 0.02 0.010 0.85
PEC26-068 4.0 586.0 582.0 0.20 0.02 0.010 0.65
PEC26-069 23.5 502.0 478.5 0.20 0.02 0.008 0.59
PEC26-070 40.0 947.0 907.0 0.20 0.02 0.006 0.74
PEC26-071 118.0 409.5 291.5 0.20 0.01 0.002 0.63
PEC26-072 0.0 956.0 956.0 0.29 0.07 0.006 1.05
Note: Each row represents the longest sample-boundary composite whose unrounded, length-weighted copper grade averages
at least 0.20% Cu. Internal lower-grade intervals are included and no maximum internal dilution was applied. Reported intervals
are downhole lengths; true widths have not yet been determined.
Table 3: Drillhole information – Completed & Released
Hole UTM East UTM North Elev (masl) Azimuth Dip Length
Drilled (m) Area
PEC25-065 713977 8267284 1901 N0 -80 1186.25 South Breccia
PEC25-066 713796 8267252 1831 N0 -75 1068.50 South Breccia
PEC26-067 713104 8268120 1718 N175 -75 1040.00 Northwest
PEC26-068 713630 8268000 2016 N180 -75 1,058.10 Center of the pit
PEC26-069 713710 8268037 2001 N180 -70 901.00 Center of the pit
PEC26-070 713611 8268327 1860 N180 -65 947.00 North-Central
PEC26-071 713404 8267683 1927 N180 -80 776.20 Centre of the pit
PEC26-072 713634 8267253 1795 N0 -82 956.00 South Breccia
Note: Coordinate Reference System (CRS): WGS 84 / UTM Zone 18S (EPSG:32718)
Table 4: Drillhole information – Other Drilling & Target Area – Assays pending or in progress
Hole UTM East UTM North Elev (masl) Azimuth Dip Length
Drilled (m) Area
PEC26-073 713415 8268234 1845 N180 -81 938.00 North-Central
PEC26-074 713325 8267618 1848 N180 -70 955.30 Center of the pit
PEC26-075 714040 8267712 2062 N130 -75 938.85 East step-out
PEC26-076 713816 8268158 2040 N180 -72 1073 Central Breccia
PEC26-077 713084 8267513 1706 N180 -72 599.25 West Pampa
PEC26-078 713498 8267249 1766 N0 -85 923.00 South Breccia
PEC26-079 713201 8267538 1739 N175 -70 850.00 EDM Vein Zone
PEC26-080 713505 8267843 2030 N180 -75 In progress Center of the pit
PEC26-081 713303 8267997 1867 N0 -60 In progress Northwest
PEC26-082 714200 8267401 1948 N270 -60 In progress South Breccia
Note: Coordinate Reference System (CRS): WGS 84 / UTM Zone 18S (EPSG:32718)
Exploration Productivity and 2026 Program
Based on the latest drill tracker, over 16,000 metres have been drilled since the current campaign began, with 16 holes
completed and three additional holes in progress. Results reported to date provide new geological and assay information
across the South Breccia, Northwest, Centre-of-Pit and North-Central target areas. The Company continues to target
approximately 35,000 metres of drilling at Pecoy in 2026.
Pecoy Project Highlights
• Large copper system: with an inferred resource of 865 Mt at 0.34% Cu (~6.5 billion pounds contained copper), plus
associated gold, molybdenum and silver credits
• Multiple target areas: South Breccia, Northwest, Centre of the Pit, North-Central and additional targets across the
broader Pecoy property.
• Low-elevation location: approximately 1,650 metres above sea level with year-round road access and proximity to
power, highways and the Pacific coast.
• Favourable topography at Pecoy Hill, with extensive mineralization expressed at surface and consistent with potential
open-pit style geometry
• Additional district-scale upside at Tororume (~8 km north), where all nine historical drill holes intersected mineralization
• Large 2026 program: approximately 35,000 metres planned at Pecoy, compared with approximately 49,000 metres of
historical drilling before the current campaign.
For more information about Pecoy Copper, please visit our website at www.pecoycopper.com or view the Company’s VRIFY
presentation in connection with this release at https://vrify.com/decks/23893.
Figure 1: Plan view of the Pecoy Project showing the current deposit outline, principal mineralized zones, and current drill hole
locations
Figure 2: Looking north - Long-section through the South Breccia Zone illustrating drill holes PEC25-065, PEC25-066 and
PEC-26-072 and interpreted alteration and mineralization domains.
Figure 3: Looking west - Cross-section illustrating drill hole PEC26-072, along with PEC26-068 and PEC26-070
Figure 4: Looking west - Cross-section through the Northwest Zone illustrating drill hole PEC-26-067 (1,040 m total depth)
and interpreted alteration and mineralization domains. Mineralization remains open at depth.
Figure 5: Looking north - Long-section through the Northwest and Center of the Pit Zones illustrating drill hole PEC26-067,
PEC26-068 and PEC26-069 and interpreted alteration and mineralization domains.
Qualified Persons and Technical Notes
The scientific and technical information in this news release has been reviewed and approved by Vincent Cardin-Tremblay,
P.Geo., current Chief Geological Officer of Pecoy Copper, a Qualified Person as defined by National Instrument 43-101 –
Standards of Disclosure for Mineral Projects (“NI 43-101”).
The Qualified Person verified the data disclosed in this news release by reviewing the final laboratory assay workbooks and
certificates, drillhole collar and downhole-survey data, sampling and analytical procedures, and QA/QC results. No limitations
were imposed on the verification process.
Diamond drill core from the Pecoy Project was logged and sampled at the Company’s secure core facility at site by Company
personnel. Drill core was sawn in half, with one half retained for reference and the other half sampled at nominal intervals of up
to 2 metres, with sample boundaries adjusted to respect geological contacts. Core diameter varied between HQ and NQ
depending on depth.
Samples were bagged, sealed, and transported by commercial carrier to the Bureau Veritas preparation laboratory in
Arequipa, Peru, where samples were crushed and a 250 g split was pulverized to 85% passing 75 micrometres (200 mesh).
Prepared pulps were then sent to the Bureau Veritas assay laboratory in Lima, Peru. Bureau Veritas is an ISO-accredited
laboratory and is independent of the Company.
Gold analyses were performed using fire assay fusion with ICP-OES finish on a 30 g sample (FA330). Samples returning gold
values greater than 10 g/t Au were re-analyzed using fire assay with gravimetric finish (FA530). Copper and silver were
analyzed by ICP-OES/MS following a four-acid digestion as part of a 45-element multi-element suite (4A200). Samples
returning values over the upper detection limit (Au, Ag, Cu, Zn, Mo, Pb) were re-analyzed using four-acid digestion with AAS
finish (MA402).
A comprehensive Quality Assurance and Quality Control (QA/QC) program was implemented as part of the sampling and
analysis procedures. Certified reference materials, blanks, and duplicate samples (field, preparation, and analytical duplicates)
were inserted into the sample stream at regular intervals, representing approximately 15% of the total samples submitted. No
significant QA/QC issues were identified during the analysis, and the results are considered reliable for reporting purposes.
An NI 43-101 technical report in respect of the Pecoy Project with an effective date of April 30, 2025 and dated July 23, 2025
was prepared by Mining Plus and is available on SEDAR+ under the Company’s profile. Mineral resources are not mineral
reserves and do not have demonstrated economic viability.
About Pecoy Copper
Pecoy Copper is advancing the 9,975-hectare Pecoy Copper-Gold-Molybdenum-Silver Project, a large, undeveloped porphyry
system located in southern Peru’s Arequipa region, within one of the world’s most prolific copper belts. The Pecoy deposit
hosts a current inferred mineral resource of 865 million tonnes at 0.34% Cu, with significant associated gold, molybdenum,
and silver credits.
Prior to the Company’s 2026 drill program, less than 49,000 metres of historical drilling had been completed at Pecoy, defining
a broad and continuous mineralized system with potential for expansion along strike and at depth. The project benefits from its
favourable elevation of approximately 1,650 metres above sea level, providing year-round access and reduced operating
complexity compared to many high-altitude Andean deposits.
Strategically located near the Pacific coast, Pecoy enjoys excellent infrastructure, with close proximity to highways, power
lines, and water sources, and good access to the deep-water ports of Matarani (approximately 240 km southwest) and Ilo.
This infrastructure advantage positions Pecoy Copper to advance the project efficiently from exploration toward future
development within one of the world’s most established and mining-friendly jurisdictions.
The Company's common shares trade on the TSX Venture Exchange under the symbol PCU, on the Frankfurt Stock
Exchange under the symbol D5E and on the OTCQB under the symbol PCUUF.
For further information, please contact:
Vincent Metcalfe, President & CEO
Pecoy Copper Corp.
Suite 1500, 1055 West Georgia Street, Vancouver, BC V6E 4N7
Tel: (514) 249-9960 | Email: [email protected]
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. No stock exchange, securities
commission or other regulatory authority has approved or disapproved the information contained herein.
Cautionary Note Regarding Forward-Looking Information
This news release contains forward-looking information and forward-looking statements within the meaning of applicable
securities legislation. Forward-looking information includes, but is not limited to, statements regarding the planned 35,000-
metre 2026 drill program at Pecoy; future drilling, modelling and interpretation at South Breccia, the Northwest, Centre-of-Pit
and North-Central target areas; the potential geometry, continuity, scale, extension and resource-growth implications of the
mineralized system; and the Company's ability to identify targets that may support future resource evaluation. Forward-looking
information is based on management's current expectations, estimates, assumptions and beliefs, including assumptions
regarding funding, permits, access, personnel, drilling productivity, laboratory turnaround times and the availability of
equipment and contractors. Forward-looking information is subject to known and unknown risks and uncertainties, many of
which are beyond the Company's control, that may cause actual results to differ materially from those expressed or implied.
These risks include exploration and geological risk, operational risk, permitting and community-relations risk, financing and
market risk, and the other risk factors described in the Company's continuous-disclosure filings available on SEDAR+.
Forward-looking information is provided as of the date of this news release. Except as required by applicable law, the
Company undertakes no obligation to update or revise such information. Readers should not place undue reliance on forward-
looking information.
Photos accompanying this announcement are available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/bc8dd8b9-d6f5-4bed-9064-ea5e96b71304
https://www.globenewswire.com/NewsRoom/AttachmentNg/c881d204-8721-44bc-b8f8-500478da0012
https://www.globenewswire.com/NewsRoom/AttachmentNg/59ae9cd9-c5bd-4c23-afdf-8bde972d7404
https://www.globenewswire.com/NewsRoom/AttachmentNg/ffef8388-2add-49ea-880e-3adeebc0b8d6
https://www.globenewswire.com/NewsRoom/AttachmentNg/85c34a69-842d-460a-b667-99f03f49f821