Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

OM.TO ·

Osisko Metals to Begin Drilling Gravity Targets at Pine Point and Provides Corporate Update

Exploration Programs

Osisko Metals to Begin Drilling Gravity Targets at Pine Point and Provides

Corporate Update

MONTREAL, Nov. 18, 2019 -- Osisko Metals Incorporated (the “Company” or “Osisko Metals”) (TSX-V: OM; OTCQX: OMZNF;

FRANKFURT: 0B51) is pleased to announce that drilling will begin to targeting sixty (60) initial prismatic-style targets have

been chosen based on processing and analyses of the 2019 airborne gravity gradiometry (“AGG”) survey data in conjunction

with LiDAR features and newly-interpreted structural controls on mineralization.

These targets are specifically identified on criteria that are indicative of prismatic mineralization based on responses over

known, in-situ, high grade prismatic deposits as measured by ground-based gravity surveys used as a control for the AGG

system. The targets are distributed both within, and between, mineralized trends with many occurring in very sparsely drilled

areas within the East Mill, Central and North Zone.

Jeff Hussey, President & CEO of Osisko Metals, commented: “During the work leading up to the release of our 2019 MRE

(see press release dated November 13, 2019) outlining 52.4Mt grading 6.47% ZnEq, we completed the first part of our

interpretation of the airborne gravity gradiometry survey. The start of this phase of the exploration campaign marks an exciting

time for Osisko Metals as we leverage tools never available to previous operators to potentially make new discoveries.”

Corporate Update

While the project continues to rapidly grow, Osisko Metals is also beginning to assemble the necessary team to de-risk and

advance the project through the development and permitting phase concurrent to our project wide exploration program. Internal

scoping studies are being completed in preparation for launching a NI43-101 Preliminary Economic Assessment that is

planned for completion in Q2 2020 with the objective of demonstrating the potential for a global top ten zinc mine.

The Company is collaborating with Golder Associates Limited to assist and support Osisko Metals during the Environmental

Assessment process. Baselines studies continued in H2 2019 and the plan is to complete them in 2020. Aurora Geosciences

Limited is managing the exploration camp and program logistics and supporting Golder in the field.

Granting of Stock Options

The Osisko Metals Board of Directors approved the grant of incentive stock options to directors, officers and key employees to

purchase up to an aggregate of 3,105,000 common shares in the capital stock of the Company. Grants are subject to a three-

year vesting period and a five-year term at an exercise price of $0.49 per share.

As of November 18, 2019, the Company had 149,880,899 issued and outstanding common shares, 12,097,366 outstanding

stock options and 96,747 outstanding warrants.

Note regarding mineral resources and Qualified Persons

Mr. Robin Adair is the Qualified Person and the Vice President Exploration for Osisko Metals Incorporated. He is responsible

for the technical data reported in this news release and a Professional Geologist registered in the North West Territories.

About Osisko Metals

Osisko Metals Incorporated is a Canadian exploration and development company creating value in the base metal space with

a focus on zinc mineral assets. The Company controls Canada’s two premier zinc mining camps. The Company’s flagship

properties are: 1) the Pine Point Mining Camp (“PPMC”) , located in the Northwest Territories, has an Inferred Mineral

Resource of 52.4 Mt grading 4.64% zinc and 1.83% lead (6.47% ZnEq), making it the largest pit-constrained zinc deposit in

Canada (please refer to the Amended Technical Report filed on SEDAR for further information). The PPMC is located on the

south shore of Great Slave Lake in the Northwest Territories, near infrastructure and paved highway access and with 100

kilometres of haulage roads already in place. In 2019-2020, the company will explore for additional mineral resources and

continue advancing the overall project. 2) The Bathurst Mining Camp (“BMC”) , located in northern New Brunswick, has

Indicated Mineral Resources of 1.96 Mt grading 5.77% zinc, 2.38% lead, 0.22% copper and 68.9g/t silver (9.00% ZnEq) and

Inferred Mineral Resources of 3.85 Mt grading 5.34% zinc, 1.49% lead, 0.32% copper and 47.7 g/t silver (7.96% ZnEq) in the

Key Anacon and Gilmour South deposits. In 2019-2020, the Company will continue to diligently develop and explore in order to

confirm and grow both projects. The Company is also active in Quebec where it is advancing multiple base metal targets. The

Mineral Resources mentioned in this press release conform to National Instrument 43-101 standards. These mineral resources

were reported by the Company on December 6, 2018 and January 20, 2019 and were prepared by independent qualified

persons, as defined by NI43 101 guidelines.

The above-mentioned mineral resources are not mineral reserves as they do not have demonstrated economic viability. The

quantity and grade of the reported Inferred Mineral Resources are conceptual in nature and are estimated based on limited

geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological grade and/or quality of

continuity. Reference to historical production in this press release does not imply that any future mineral resources or

discoveries will be of economic viability, nor does it imply that additional discoveries will be made. Zinc equivalency

percentages are calculated using metal prices, forecasted metal recoveries, concentrate grades, transport costs, smelter

payable metals and charges (see respective technical reports for details).

For further information on Osisko Metals, visit www.osiskometals.com  or contact:

Jeff Hussey

President & CEO

Osisko Metals Incorporated

(514) 861-4441

Email: [email protected]

www.osiskometals.com

Cautionary Note Regarding Forward-Looking Information

This news release contains "forward-looking information" within the meaning of applicable Canadian securities legislation

based on expectations, estimates and projections as at the date of this news release. Forward-looking information involves

risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to

differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results

to differ materially from such forward-looking information include, but are not limited to, capital and operating costs varying

significantly from estimates; the preliminary nature of metallurgical test results; delays in obtaining or failures to obtain

required governmental, environmental or other project approvals; uncertainties relating to the availability and costs of financing

needed in the future; changes in equity markets; inflation; fluctuations in commodity prices; delays in the development of

projects; the other risks involved in the mineral exploration and development industry; and those risks set out in the

Corporation's public documents filed on SEDAR at www.sedar.com. Although the Corporation believes that the assumptions

and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not

be placed on such information, which only applies as of the date of this news release, and no assurance can be given that

such events will occur in the disclosed time frames or at all. The Corporation disclaims any intention or obligation to update or

revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as

required by law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX

Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. No stock exchange, securities

commission or other regulatory authority has approved or disapproved the information contained herein.