Osisko Metals Intersects 19.42% Zinc+Lead Over 13.11 Metres at Pine Point
Osisko Metals Intersects 19.42% Zinc+Lead Over 13.11 Metres at Pine Point
MONTREAL, May 22, 2019 -- Osisko Metals Incorporated (the “ Company” or “Osisko Metals”) (TSX-V: OM; FRANKFURT:
0B51; OTCQX: OMZNF) is pleased to announce additional assay results from 145 drill holes completed in the L-36 and L-35
areas within the East Mill Zone in the Pine Point Mining Camp (“PPMC”). Drill hole EM-18-PP-331 intersected 10.23% zinc
and 9.19% lead over 13.11 metres and hole EM-18-PP-209 intersected 9.60% zinc and 1.53% lead over 13.50 metres.
Other highlighted intersections are noted in Table 1 below. (See EMZ L36 map)
All intersections are within flat-lying tabular-style deposits, and are located between 9 to 51 metres vertical depths . Drill
hole composites and location details are provided in Tables 2 & 3.
Table 1 : Selected Drill Highlights
Hole Name Zone Area From To Width Zinc Lead Lead +
Zinc
(metres) (metres) (metres) % % %
EM-18-PP-331 East Mill L-35 26.40 39.51 13.11 10.23 9.19 19.42
EM-18-PP-211 East Mill L-35 36.00 42.00 6.00 20.28 5.92 26.20
EM-18-PP-209 East Mill L-36 33.50 47.00 13.50 9.60 1.53 11.13
EM-18-PP-351 East Mill L-36 30.00 40.00 10.00 11.62 2.50 14.12
Jeff Hussey, President & CEO of Osisko Metals, commented: “With this last set of results in hand, we have completed our
initial definition drilling campaign on the PPMC, which began in 2018. Drilling completed to date will be incorporated into the
next Mineral Resource Estimate, slated for release in Q3, and we anticipate that most of the existing resources will be
upgraded to the Indicated category. With the upcoming summer season, we will embark on a brownfield exploration program
at Pine Point, focused on increasing the resource base and making new discoveries. We believe the property holds significant
exploration upside at depth and along its 65km of strike length.”
The objective of the 2018 – 2019 drill program was to convert the Cominco Ltd. unclassified near-surface historical resources
into current mineral resources and to locally extend known zones of mineralization. An initial 2018 Inferred Mineral
Resource of 38.4 Mt grading 4.58% zinc and 1.85% lead was calculated on historical drilling and using the initial 317 drill
holes out of a total of 1031 holes that were drilled by Osisko Metals during the 2018 and 2019 campaign. These latest East
Mill Zone drill holes were not included in this 2018 Inferred Mineral Resource Estimate.
The East Mill Zone extends for 7.6 kilometres along strike, contains eight deposits, three of which were mined by Cominco,
and are located 1.7 kilometres to the east of the existing electrical sub-station and former mill site along a main haulage road.
Cominco produced 3,417,550 tonnes of 3.4% Zinc and 1.0% Lead from the L-37 pit, 262,170 tonnes of 2.8% Zinc and 1.1%
Lead from the L-30 pit and 350,870 tonnes of 5.5% Zinc and 2.2% Lead from the underground M-40 mine. Reported NI43-101
Inferred Mineral Resources for the East Mill Zone total 5.50 million tonnes of 3.76% Zinc and 1.30% Lead.
About Osisko Metals
Osisko Metals is a Canadian exploration and development company creating value in the base metal space with a focus on
zinc mineral assets. The Company controls Canada’s two premier historical zinc mining camps: The Pine Point Mining
Camp (“PPMC”), located on the south shore of Great Slave Lake in the Northwest Territories, near established infrastructure,
paved highway access and with 100 kilometres of mine haulage roads and power substation already in place. The PPMC
currently hosts a NI43-101 Inferred Mineral Resource of 38.4 Mt grading 4.58% zinc and 1.85% lead, making it the largest near
-surface, pit-constrained zinc deposit in Canada (please refer to the SEDAR-filed Amended Technical Report for further
information). The 2018-2019 drill holes, once fully assayed, will be incorporated into the database with the objective of issuing
a new resource estimate in H2 2019. PPMC is located on the south shore of Great Slave Lake in the Northwest Territories,
near infrastructure and paved highway access and with 100 kilometres of haulage roads already in place. The Bathurst Mining
Camp (“BMC”), located in northern New Brunswick, with NI43-101 Indicated Mineral Resources of 1.96 Mt grading 5.77% zinc,
2.38% lead, 0.22% copper and 68.9g/t silver (9.00% ZnEq) and Inferred Mineral Resources of 3.85 Mt grading 5.34% zinc,
1.49% lead, 0.32% copper and 47.7 g/t silver (7.96% ZnEq) in the Key Anacon and Gilmour South deposits. In Québec, the
Company owns 42,000 hectares that cover 12 grass-root zinc targets that will be selectively advanced through exploration in
2019.
Note regarding mineral resources and Qualified Persons
The above-mentioned current Inferred Mineral Resources for the PPMC conform to National Instrument 43-101 standards.
These mineral resources were reported by the Company on December 6, 2018, and the independent qualified person for the
resource estimate, as defined by NI43-101 guidelines, is Pierre-Luc Richard, P. Geo, of BBA Inc.
For the BMC, the above-mentioned Inferred and Indicated Mineral Resource conforms to National Instrument 43-101 standards.
These mineral resources were reported by the Company on February 20, 2019, and the independent qualified person for the
resource estimate, as defined by NI43-101 guidelines, is Pierre Desautels, P. Geo., of AGP Mining Consultants Inc.
Technical reports can be referenced in the Company’s filings at www.sedar.com
Stanley G. Clemmer, P. Geo., registered in the Northwest Territories, is Chief Geologist for Pine Point Mining Limited, a
wholly owned subsidiary of Osisko Metals Incorporated. He is the Qualified Person responsible for the technical data reported
in this news release.
Quality Assurance / Quality Control
Osisko Metals adheres to a strict Quality Assurance and Quality Control program with regard to core handling, sampling,
transportation of samples and lab analyses. Drill core samples from the Pine Point project area were securely transported to
its core facility in Hay River, Northwest Territories where they were logged and sampled. Samples selected for assay were
shipped via secure transportation to the ALS Canada Ltd.’s preparation facility in Yellowknife. Pulps were analyzed at the ALS
Canada Ltd. facility in North Vancouver, British Columbia. All samples are analyzed by four acid digestion followed by both
ICP-AES and ICP-MS for ultra-trace level detection for a multi-element suite with a 1% upper detection limit for base metals.
Samples reporting over 1% for Zn and 1% for Pb are analyzed by assay grade four acid digestion and ICP-AES analysis with
an upper detection limit of 30% and 20% respectively. Samples reporting Zn >30% and or Pb >20% are analyzed by
traditional titration.
Table 2: Composite Assay Results
Hole Name Area From To Drilled
Width
True
Width Zinc Lead Lead +
Zinc
(metres) (metres) (metres) (metres) % % %
EM-18-PP-150 L-36 34.08 40.81 6.73 6.10 2.28 0.76 3.04
EM-18-PP-171 L-36 47.46 49.32 1.86 1.69 1.56 0.03 1.59
EM-18-PP-171 L-36 33.60 38.00 4.40 3.99 3.19 1.09 4.28
EM-18-PP-172 L-36 No Significant Results
EM-18-PP-174 L-36 35.17 41.30 6.13 6.13 5.07 1.69 6.76
EM-18-PP-175 L-36 35.71 38.53 2.82 2.82 1.51 0.67 2.18
EM-18-PP-175 L-36 40.40 44.47 4.07 4.07 2.71 0.47 3.18
EM-18-PP-175 L-36 51.50 51.90 0.40 0.40 40.67 6.63 47.30
EM-18-PP-176 L-36 31.93 44.00 12.07 12.07 7.68 0.78 8.46
EM-18-PP-177 L-36 47.00 49.20 2.20 1.99 1.71 0.05 1.76
EM-18-PP-178 L-36 46.50 48.00 1.50 1.36 1.63 0.12 1.74
EM-18-PP-179 L-36 No Significant Results
EM-18-PP-180 L-36 39.90 40.40 0.50 0.50 1.40 0.06 1.46
EM-18-PP-180 L-36 43.50 48.00 4.50 4.50 0.88 0.11 0.99
EM-18-PP-183 L-35 58.80 60.00 1.20 1.20 3.20 0.18 3.38
EM-18-PP-183 L-35 43.00 55.00 12.00 12.00 1.53 0.36 1.89
EM-18-PP-183 L-35 33.95 40.50 6.55 6.55 5.49 1.30 6.78
EM-18-PP-184 L-35 41.67 43.74 2.07 2.07 5.71 0.48 6.20
EM-18-PP-185 L-35 42.00 43.05 1.05 1.05 7.34 1.19 8.53
EM-18-PP-185 L-35 33.00 35.95 2.95 2.95 4.86 1.08 5.94
EM-18-PP-186 L-35 33.38 34.88 1.50 1.50 2.07 1.73 3.80
EM-18-PP-187 L-35 42.00 45.74 3.74 3.74 12.46 1.47 13.93
EM-18-PP-188 L-35 42.91 44.91 2.00 2.00 3.48 1.00 4.48
EM-18-PP-188 L-35 31.10 34.00 2.90 2.90 6.25 1.49 7.74
EM-18-PP-189 L-35 35.36 45.00 9.64 9.64 5.00 0.70 5.70
EM-18-PP-190 L-36 36.50 37.50 1.00 1.00 1.09 0.41 1.49
EM-18-PP-190 L-36 41.90 44.30 2.40 2.40 1.33 0.83 2.16
EM-18-PP-201 L-36 47.00 48.00 1.00 0.87 0.90 0.46 1.36
EM-18-PP-202 L-36 59.00 60.00 1.00 0.82 4.84 0.02 4.86
EM-18-PP-203 L-36 39.90 47.61 7.71 7.71 4.85 0.54 5.39
EM-18-PP-204 L-36 59.00 60.00 1.00 0.77 1.55 0.00 1.55
EM-18-PP-204 L-36 52.30 54.60 2.30 1.76 5.39 1.20 6.59
EM-18-PP-204 L-36 47.00 49.50 2.50 1.92 6.74 1.60 8.34
EM-18-PP-205 L-36 63.50 64.50 1.00 0.82 2.08 0.21 2.29
EM-18-PP-206 L-36 47.00 50.00 3.00 2.46 6.25 1.73 7.98
EM-18-PP-207 L-36 39.50 41.50 2.00 1.88 0.69 0.27 0.97
EM-18-PP-208 L-36 50.50 51.50 1.00 1.00 6.34 0.41 6.75
EM-18-PP-208 L-36 43.65 45.82 2.17 2.17 18.76 4.86 23.61
EM-18-PP-208 L-36 30.70 36.61 5.91 5.91 7.21 2.99 10.20
EM-18-PP-209 L-36 33.50 47.00 13.50 13.50 9.60 1.53 11.13
EM-18-PP-210 L-36 31.00 34.00 3.00 3.00 4.71 1.44 6.14
EM-18-PP-211 L-35 36.00 42.00 6.00 6.00 20.28 5.92 26.20
EM-18-PP-212 L-35 28.00 29.00 1.00 1.00 0.95 3.88 4.83
EM-18-PP-213 L-35 27.50 28.40 0.90 0.90 0.43 0.28 0.71
EM-18-PP-214 L-35 50.00 51.00 1.00 1.00 3.88 0.32 4.20
EM-18-PP-214 L-35 29.00 38.00 9.00 9.00 3.02 2.85 5.87
EM-18-PP-215 L-35 54.30 55.30 1.00 1.00 2.91 0.21 3.12
EM-18-PP-215 L-35 35.50 38.04 2.54 2.54 2.71 2.40 5.11
EM-18-PP-216 L-35 34.30 35.50 1.20 1.20 1.24 0.06 1.30
EM-18-PP-216 L-35 47.95 50.70 2.75 2.75 2.27 0.09 2.36
EM-18-PP-217 L-35 No Significant Results
EM-18-PP-218 L-35 28.64 33.35 4.71 4.71 2.12 0.52 2.64
EM-18-PP-218 L-35 49.37 50.29 0.92 0.92 14.27 2.37 16.63
EM-18-PP-219 L-35 No Significant Results
EM-18-PP-220 L-35 30.00 33.50 3.50 3.50 1.90 0.55 2.45
EM-18-PP-231 L-36 51.00 51.30 0.30 0.30 9.84 10.40 20.24
EM-18-PP-231 L-36 32.00 40.00 8.00 8.00 2.75 0.58 3.33
EM-18-PP-232 L-36 33.11 34.12 1.01 1.01 2.25 0.44 2.69
EM-18-PP-232 L-36 39.50 51.71 12.21 12.21 2.46 0.32 2.78
EM-18-PP-233 L-36 40.50 44.50 4.00 4.00 1.24 0.21 1.45
EM-18-PP-233 L-36 31.40 34.46 3.06 3.06 2.89 0.17 3.06
EM-18-PP-234 L-36 25.30 28.50 3.20 3.20 4.40 2.87 7.27
EM-18-PP-235 L-36 26.50 32.00 5.50 5.50 1.01 3.02 4.02
EM-18-PP-235 L-36 38.75 47.00 8.25 8.25 3.26 0.41 3.67
EM-18-PP-236 L-36 31.00 31.55 0.55 0.55 1.10 0.45 1.55
EM-18-PP-237 L-36 45.00 48.00 3.00 2.72 2.62 0.93 3.55
EM-18-PP-238 L-36 42.00 49.80 7.80 6.39 4.38 1.25 5.63
EM-18-PP-238 L-36 35.35 39.45 4.10 3.36 7.10 8.35 15.45
EM-18-PP-239 L-36 47.80 49.30 1.50 1.30 1.10 0.01 1.11
EM-18-PP-240 L-36 43.35 51.50 8.15 6.68 4.84 0.70 5.55
EM-18-PP-240 L-36 31.50 37.50 6.00 4.91 7.93 1.87 9.80
EM-18-PP-241 L-35 22.29 30.00 7.71 7.71 5.54 0.10 5.65
EM-18-PP-242 L-35 29.00 30.00 1.00 1.00 1.99 0.09 2.07
EM-18-PP-242 L-35 22.00 23.00 1.00 1.00 2.73 0.09 2.82
EM-18-PP-242 L-35 26.00 28.00 2.00 2.00 2.97 0.04 3.00
EM-18-PP-243 L-35 28.80 29.70 0.90 0.64 4.54 1.09 5.63
EM-18-PP-243 L-35 33.90 35.85 1.95 1.38 6.75 4.99 11.74
EM-18-PP-243 L-35 39.90 45.20 5.30 3.75 10.89 5.82 16.70
EM-18-PP-244 L-35 39.75 47.45 7.70 5.44 11.34 4.82 16.16
EM-18-PP-245 L-35 22.60 27.92 5.32 5.32 4.19 3.09 7.28
EM-18-PP-251 L-36 31.10 45.00 13.90 11.39 3.61 1.33 4.94
EM-18-PP-252 L-36 37.00 40.00 3.00 3.00 1.10 0.14 1.24
EM-18-PP-252 L-36 27.00 29.00 2.00 2.00 5.28 2.92 8.20
EM-18-PP-253 L-36 28.43 29.35 0.92 0.92 4.89 1.66 6.55
EM-18-PP-254 L-36 30.89 32.89 2.00 1.73 15.83 5.27 21.10
EM-18-PP-255 L-36 31.50 38.00 6.50 5.63 3.02 0.19 3.21
EM-18-PP-255 L-36 46.00 48.00 2.00 1.73 23.36 3.12 26.48
EM-18-PP-256 L-36 26.67 29.00 2.33 2.33 13.30 1.45 14.75
EM-18-PP-257 L-36 No Significant Results
EM-18-PP-295 L-35 48.00 49.40 1.40 1.40 4.21 0.81 5.02
EM-18-PP-295 L-35 34.61 42.30 7.69 7.69 11.04 1.85 12.89
EM-18-PP-296 L-35 31.00 33.00 2.00 2.00 2.29 0.44 2.73
EM-18-PP-296 L-35 35.00 36.00 1.00 1.00 0.08 6.50 6.58
EM-18-PP-297 L-35 51.00 54.50 3.50 3.50 0.56 1.13 1.69
EM-18-PP-297 L-35 37.01 43.04 6.03 6.03 3.39 0.29 3.68
EM-18-PP-298 L-35 29.50 36.00 6.50 6.50 8.19 1.87 10.07
EM-18-PP-299 L-35 33.91 43.75 9.84 9.84 6.86 0.33 7.19
EM-18-PP-300 L-35 32.00 34.00 2.00 2.00 1.68 2.42 4.09
EM-18-PP-305 L-35 9.00 10.37 1.37 1.37 2.80 0.23 3.03
EM-18-PP-308 L-36 32.97 36.56 3.59 3.59 2.60 0.29 2.89
EM-18-PP-309 L-36 36.40 38.43 2.03 2.03 1.32 0.39 1.71
EM-18-PP-310 L-36 33.00 39.75 6.75 6.75 3.50 0.34 3.84
EM-18-PP-311 L-36 No Significant Results
EM-18-PP-312 L-36 48.20 48.90 0.70 0.70 37.47 13.75 51.22
EM-18-PP-312 L-36 27.90 34.24 6.34 6.34 0.62 8.11 8.72
EM-18-PP-313 L-36 38.00 39.00 1.00 1.00 6.75 0.38 7.13
EM-18-PP-313 L-36 47.00 48.00 1.00 1.00 6.87 4.32 11.19
EM-18-PP-313 L-36 23.51 32.00 8.49 8.49 0.40 1.00 1.40
EM-18-PP-314 L-36 44.50 48.00 3.50 3.50 1.58 0.01 1.58
EM-18-PP-314 L-36 29.00 31.50 2.50 2.50 4.49 2.24 6.73
EM-18-PP-314 L-36 37.80 41.50 3.70 3.70 8.07 0.10 8.17
EM-18-PP-315 L-36 23.00 24.30 1.30 1.30 0.36 0.48 0.84
EM-18-PP-316 L-36 38.05 40.52 2.47 2.47 3.08 0.18 3.26
EM-18-PP-316 L-36 27.05 35.25 8.20 8.20 3.19 2.38 5.57
EM-18-PP-317 L-36 47.00 48.30 1.30 1.30 1.18 0.12 1.30
EM-18-PP-318 L-36 46.92 49.40 2.48 2.48 1.88 0.22 2.11
EM-18-PP-318 L-36 33.00 42.10 9.10 9.10 2.24 0.21 2.45
EM-18-PP-319 L-36 43.50 50.15 6.65 6.65 2.44 0.96 3.39
EM-18-PP-320 L-36 39.00 40.00 1.00 1.00 0.20 1.82 2.02
EM-18-PP-320 L-36 32.00 33.00 1.00 1.00 2.36 0.69 3.05
EM-18-PP-320 L-36 49.83 50.83 1.00 1.00 10.35 1.24 11.59
EM-18-PP-321 L-36 30.00 30.87 0.87 0.87 16.35 7.98 24.33
EM-18-PP-322 L-36 37.00 40.00 3.00 3.00 4.20 0.60 4.81
EM-18-PP-322 L-36 29.50 32.50 3.00 3.00 6.22 3.06 9.28
EM-18-PP-322 L-36 45.16 46.16 1.00 1.00 33.62 5.56 39.18
EM-18-PP-323 L-36 28.42 31.82 3.40 3.40 3.19 0.88 4.07
EM-18-PP-323 L-36 38.06 40.60 2.54 2.54 11.11 3.19 14.30
EM-18-PP-324 L-36 32.34 42.77 10.43 10.43 4.76 1.26 6.02
EM-18-PP-325 L-36 38.12 39.14 1.02 1.02 5.95 1.02 6.97
EM-18-PP-326 L-36 30.73 32.39 1.66 1.66 13.87 3.04 16.92
EM-18-PP-326 L-36 36.39 39.59 3.20 3.20 7.94 0.93 8.86
EM-18-PP-327 L-36 33.00 39.41 6.41 6.41 12.74 1.70 14.44
EM-18-PP-328 L-36 32.37 33.64 1.27 1.27 3.59 2.18 5.77
EM-18-PP-329 L-36 32.35 32.82 0.47 0.47 5.30 1.37 6.67
EM-18-PP-330 L-36 51.00 52.00 1.00 0.97 19.10 3.51 22.61
EM-18-PP-331 L-35 26.40 39.51 13.11 13.11 10.23 9.19 19.42
EM-18-PP-332 L-35 52.07 53.65 1.58 1.58 3.73 0.05 3.79
EM-18-PP-332 L-35 39.15 41.50 2.35 2.35 7.78 1.34 9.12
EM-18-PP-332 L-35 28.84 35.70 6.86 6.86 5.01 6.85 11.87
EM-18-PP-333 L-35 33.00 38.54 5.54 5.54 1.65 0.01 1.66
EM-18-PP-333 L-35 24.75 26.08 1.33 1.33 0.01 8.40 8.41
EM-18-PP-334 L-35 32.50 36.00 3.50 3.50 7.18 2.23 9.41
EM-18-PP-335 L-35 45.26 47.16 1.90 1.90 1.44 0.02 1.46
EM-18-PP-335 L-35 30.00 33.00 3.00 3.00 1.54 0.17 1.71
EM-18-PP-336 L-35 46.50 47.72 1.22 1.22 4.41 0.10 4.51
EM-18-PP-337 L-35 28.75 31.38 2.63 2.63 5.71 0.86 6.57
EM-18-PP-338 L-35 30.79 35.79 5.00 5.00 1.39 0.10 1.49
EM-18-PP-339 L-35 34.24 35.24 1.00 1.00 0.78 2.26 3.04
EM-18-PP-340 L-35 31.00 33.00 2.00 2.00 20.96 1.43 22.38
EM-18-PP-341 L-35 31.44 32.44 1.00 1.00 1.20 0.01 1.21
EM-18-PP-342 L-35 30.63 32.63 2.00 2.00 0.58 0.21 0.79
EM-18-PP-343 L-35 30.50 31.56 1.06 1.06 1.09 0.37 1.46
EM-18-PP-343 L-35 43.25 44.00 0.75 0.75 34.39 11.50 45.89
EM-18-PP-344 L-35 23.85 24.60 0.75 0.75 3.86 0.63 4.49
EM-18-PP-344 L-35 26.50 27.80 1.30 1.30 11.91 0.30 12.21
EM-18-PP-345 L-35 No Significant Results
EM-18-PP-346 L-35 21.63 31.00 9.37 9.37 10.99 0.59 11.58
EM-18-PP-347 L-35 21.00 30.75 9.75 9.75 6.84 0.29 7.13
EM-18-PP-348 L-35 29.08 30.73 1.65 1.65 5.85 1.18 7.04
EM-18-PP-348 L-35 23.41 25.71 2.30 2.30 13.58 0.13 13.71
EM-18-PP-349 L-35 24.90 27.51 2.61 2.61 6.56 4.15 10.71
EM-18-PP-350 L-35 39.26 39.90 0.64 0.64 0.00 1.57 1.57
EM-18-PP-351 L-36 48.00 50.00 2.00 2.00 13.92 5.32 19.24
EM-18-PP-351 L-36 30.00 40.00 10.00 10.00 11.62 2.50 14.12
EM-18-PP-352 L-36 38.50 50.50 12.00 12.00 3.19 0.73 3.93
EM-18-PP-352 L-36 26.50 32.50 6.00 6.00 6.79 2.81 9.61
EM-18-PP-353 L-36 31.32 32.32 1.00 1.00 2.57 0.49 3.06
EM-18-PP-353 L-36 40.00 41.20 1.20 1.20 4.79 0.58 5.37
EM-18-PP-354 L-36 26.00 30.75 4.75 4.75 17.94 2.56 20.49
EM-18-PP-355 L-36 38.80 39.85 1.05 1.05 3.16 0.12 3.28
EM-18-PP-355 L-36 28.75 36.40 7.65 7.65 12.62 1.94 14.57
EM-18-PP-356 L-36 52.50 55.25 2.75 2.11 1.33 0.12 1.45
EM-18-PP-356 L-36 58.25 60.88 2.63 2.01 7.17 1.13 8.30
EM-18-PP-357 L-36 27.80 29.80 2.00 2.00 1.77 0.55 2.32
EM-18-PP-358 L-36 45.50 46.50 1.00 1.00 1.62 0.02 1.64
EM-18-PP-358 L-36 31.00 32.00 1.00 1.00 2.25 0.96 3.21
EM-18-PP-358 L-36 38.00 41.50 3.50 3.50 7.13 1.60 8.73
EM-18-PP-359 L-36 47.00 51.00 4.00 4.00 5.27 0.94 6.20
EM-18-PP-359 L-36 30.00 32.00 2.00 2.00 12.64 5.54 18.17
EM-18-PP-359 L-36 38.00 43.50 5.50 5.50 9.77 1.02 10.79
EM-18-PP-360 L-36 63.00 66.00 3.00 2.30 8.17 1.38 9.55
EM-18-PP-360 L-36 31.00 39.50 8.50 6.51 7.65 0.81 8.45
EM-18-PP-361 L-36 36.00 42.00 6.00 4.60 1.32 0.08 1.40
EM-18-PP-361 L-36 26.48 34.00 7.52 5.76 0.88 1.55 2.43
EM-18-PP-362 L-36 34.80 35.89 1.09 1.09 4.19 5.20 9.40
EM-18-PP-363 L-36 27.00 29.00 2.00 2.00 6.76 0.49 7.25
EM-18-PP-364 L-36 29.50 30.00 0.50 0.50 3.95 0.10 4.05
EM-18-PP-365 L-36 25.90 27.55 1.65 1.65 3.85 2.75 6.60
EM-18-PP-366 L-36 38.29 40.01 1.72 1.72 3.59 0.60 4.19
EM-18-PP-366 L-36 52.63 53.13 0.50 0.50 23.40 5.57 28.97
EM-18-PP-367 L-36 36.35 39.25 2.90 2.90 3.43 0.79 4.22
EM-18-PP-368 L-36 39.70 42.05 2.35 2.35 2.81 1.73 4.53
EM-18-PP-369 L-36 46.00 47.00 1.00 1.00 3.43 0.49 3.92
EM-18-PP-369 L-36 40.00 44.00 4.00 4.00 3.26 0.33 3.58
EM-18-PP-370 L-36 40.50 49.00 8.50 8.50 3.61 0.22 3.83
EM-18-PP-371 L-36 49.80 50.80 1.00 1.00 1.79 0.09 1.88
EM-18-PP-371 L-36 55.80 56.80 1.00 1.00 2.08 0.02 2.10
EM-18-PP-372 L-36 39.00 40.50 1.50 1.50 0.22 1.36 1.58
EM-18-PP-372 L-36 42.50 45.50 3.00 3.00 1.75 0.21 1.96
EM-18-PP-373 L-36 No Significant Results
EM-18-PP-374 L-36 37.24 39.24 2.00 2.00 5.95 9.29 15.23
EM-18-PP-375 L-36 35.80 37.80 2.00 2.00 2.40 0.04 2.44
EM-18-PP-376 L-36 No Significant Results
EM-18-PP-377 L-36 28.00 29.00 1.00 1.00 0.37 3.34 3.71
EM-18-PP-378 L-36 27.00 28.00 1.00 1.00 1.64 0.15 1.79
EM-18-PP-379 L-35 25.00 31.00 6.00 6.00 9.71 8.43 18.13
EM-18-PP-380 L-35 29.00 31.85 2.85 2.85 7.38 1.13 8.50
EM-18-PP-381 L-35 20.61 24.00 3.39 3.39 0.42 0.08 0.51
EM-18-PP-382 L-35 38.05 39.42 1.37 1.37 1.88 0.00 1.88
EM-18-PP-383 L-35 26.18 27.18 1.00 1.00 1.07 0.00 1.07
EM-18-PP-384 L-35 24.00 32.00 8.00 8.00 2.32 2.17 4.49
EM-18-PP-385 L-35 33.27 34.42 1.15 1.15 3.65 0.04 3.68
EM-18-PP-385 L-35 40.40 43.00 2.60 2.60 11.06 1.76 12.82
Table 3: Drill Hole Collar Locations (UTM NAD83 Zone 11)
Hole Name Zone Area Easting Northing Elevation
(metres) Azimuth Dip Depth
(metres)
EM-18-PP-150 East Mill L-36 641583.5 6750781.5 217.20 120 -65 68.00
EM-18-PP-171 East Mill L-36 641624.8 6750835.6 217.44 135 -65 62.00
EM-18-PP-172 East Mill L-36 641607.0 6750884.9 218.11 0 -90 28.20
EM-18-PP-174 East Mill L-36 641634.0 6750857.7 217.14 0 -90 57.50
EM-18-PP-175 East Mill L-36 641635.4 6750900.6 217.67 0 -90 60.00
EM-18-PP-176 East Mill L-36 641662.3 6750876.2 217.24 0 -90 58.00
EM-18-PP-177 East Mill L-36 641692.9 6750832.3 217.24 110 -65 67.50
EM-18-PP-178 East Mill L-36 641693.3 6750831.9 217.12 110 -65 63.00
EM-18-PP-179 East Mill L-36 641757.8 6750751.6 217.85 0 -90 57.50
EM-18-PP-180 East Mill L-36 641755.6 6750783.9 217.25 0 -90 59.00
EM-18-PP-183 East Mill L-35 642050.8 6751495.3 217.42 0 -90 60.00
EM-18-PP-184 East Mill L-35 642085.5 6751521.6 216.29 0 -90 60.00
EM-18-PP-185 East Mill L-35 642104.2 6751494.8 216.91 0 -90 60.00
EM-18-PP-186 East Mill L-35 642267.0 6751563.3 215.89 0 -90 60.00
EM-18-PP-187 East Mill L-35 642219.0 6751584.0 215.25 0 -90 60.00
EM-18-PP-188 East Mill L-35 642190.0 6751569.3 215.69 0 -90 60.00
EM-18-PP-189 East Mill L-35 642172.0 6751600.2 215.46 0 -90 60.00
EM-18-PP-190 East Mill L-36 642161.2 6751553.8 215.70 0 -90 60.00
EM-18-PP-201 East Mill L-36 641791.2 6750823.8 217.37 205 -60 69.00
EM-18-PP-202 East Mill L-36 641789.7 6750822.1 217.27 105 -55 79.50
EM-18-PP-203 East Mill L-36 641787.2 6750841.0 217.62 0 -90 59.00
EM-18-PP-204 East Mill L-36 641746.3 6750883.6 217.22 180 -50 75.50
EM-18-PP-205 East Mill L-36 641747.6 6750883.3 217.23 60 -55 84.00
EM-18-PP-206 East Mill L-36 641748.3 6750882.8 217.27 260 -55 75.00
EM-18-PP-207 East Mill L-36 641716.0 6750907.7 217.52 70 -70 66.00
EM-18-PP-208 East Mill L-36 641703.6 6750933.7 216.98 0 -90 62.00
EM-18-PP-209 East Mill L-36 641679.6 6750914.8 217.00 0 -90 63.50
EM-18-PP-210 East Mill L-36 641598.0 6750916.8 217.57 0 -90 59.00
EM-18-PP-211 East Mill L-35 642258.5 6751637.9 215.01 0 -90 60.00
EM-18-PP-212 East Mill L-35 642269.3 6751604.9 215.26 0 -90 60.00
EM-18-PP-213 East Mill L-35 642303.0 6751625.6 215.04 0 -90 60.00
EM-18-PP-214 East Mill L-35 642324.6 6751601.0 215.65 0 -90 60.00
EM-18-PP-215 East Mill L-35 642316.0 6751659.5 215.18 0 -90 60.00
EM-18-PP-216 East Mill L-35 642304.9 6751694.7 214.43 0 -90 60.00
EM-18-PP-217 East Mill L-35 642319.0 6751764.1 214.31 0 -90 60.00
EM-18-PP-218 East Mill L-35 642341.6 6751697.4 214.31 0 -90 60.00
EM-18-PP-219 East Mill L-35 642380.8 6751634.8 215.50 0 -90 60.00
EM-18-PP-220 East Mill L-35 642367.2 6751668.4 215.11 0 -90 60.00
EM-18-PP-231 East Mill L-36 641625.0 6750927.3 217.47 0 -90 57.50
EM-18-PP-232 East Mill L-36 641658.2 6750946.8 216.57 0 -90 66.50
EM-18-PP-233 East Mill L-36 641686.1 6750959.7 216.56 0 -90 60.50
EM-18-PP-234 East Mill L-36 641718.9 6751014.7 216.53 0 -90 57.50
EM-18-PP-235 East Mill L-36 641680.6 6751014.1 216.66 0 -90 57.50
EM-18-PP-236 East Mill L-36 641670.1 6750985.0 216.65 0 -90 60.50
EM-18-PP-237 East Mill L-36 641760.1 6750947.0 216.44 180 -65 66.00
EM-18-PP-238 East Mill L-36 641761.9 6750981.1 216.27 280 -55 69.00
EM-18-PP-239 East Mill L-36 641764.1 6750981.8 216.29 130 -60 69.00
EM-18-PP-240 East Mill L-36 641758.6 6751047.0 216.23 210 -55 66.00
EM-18-PP-241 East Mill L-35 642480.0 6751664.9 214.39 0 -90 60.00
EM-18-PP-242 East Mill L-35 642569.5 6751768.9 213.84 0 -90 54.00
EM-18-PP-243 East Mill L-35 642755.3 6751795.7 213.96 0 -45 70.00
EM-18-PP-244 East Mill L-35 642793.6 6751863.5 213.86 215 -45 78.00
EM-18-PP-245 East Mill L-35 642814.7 6751852.3 213.88 0 -90 51.00
EM-18-PP-251 East Mill L-36 641758.6 6751047.0 216.23 285 -55 63.00
EM-18-PP-252 East Mill L-36 641786.2 6751044.2 216.09 0 -90 56.00
EM-18-PP-253 East Mill L-36 641779.2 6751074.7 216.21 0 -90 57.50
EM-18-PP-254 East Mill L-36 641800.4 6751083.7 216.26 65 -60 63.00
EM-18-PP-255 East Mill L-36 641736.4 6751088.1 216.14 235 -60 60.00
EM-18-PP-256 East Mill L-36 641758.5 6751103.1 216.26 0 -90 57.50
EM-18-PP-257 East Mill L-36 641785.5 6751119.5 216.22 90 -65 63.00
EM-18-PP-295 East Mill L-35 642071.6 6751510.8 215.00 0 -90 66.00
EM-18-PP-296 East Mill L-35 642116.1 6751516.7 215.82 0 -90 60.00
EM-18-PP-297 East Mill L-35 642244.3 6751599.7 215.37 0 -90 63.00
EM-18-PP-298 East Mill L-35 642197.5 6751607.0 215.23 0 -90 60.00
EM-18-PP-299 East Mill L-35 642148.1 6751582.1 215.58 0 -90 60.00
EM-18-PP-300 East Mill L-35 642290.7 6751557.0 215.96 0 -90 60.00
EM-18-PP-305 East Mill L-35 644347.3 6752675.6 215.03 0 -90 33.00
EM-18-PP-308 East Mill L-36 641902.3 6751398.9 216.08 0 -90 60.00
EM-18-PP-309 East Mill L-36 641845.2 6751419.6 218.57 0 -90 60.00
EM-18-PP-310 East Mill L-36 641886.7 6751423.0 218.16 0 -90 60.00
EM-18-PP-311 East Mill L-36 641874.0 6751439.6 217.89 0 -90 60.00
EM-18-PP-312 East Mill L-36 641998.8 6751420.6 216.07 0 -90 63.00
EM-18-PP-313 East Mill L-36 642014.4 6751385.9 215.94 0 -90 60.00
EM-18-PP-314 East Mill L-36 642027.3 6751356.3 216.09 0 -90 60.00
EM-18-PP-315 East Mill L-36 642013.6 6751319.4 216.11 0 -90 60.00
EM-18-PP-316 East Mill L-36 641986.4 6751304.5 216.25 0 -90 57.00
EM-18-PP-317 East Mill L-36 641986.5 6751332.6 216.21 0 -90 57.00
EM-18-PP-318 East Mill L-36 642006.8 6751281.8 215.81 0 -90 60.00
EM-18-PP-319 East Mill L-36 641979.6 6751260.8 216.09 0 -90 60.00
EM-18-PP-320 East Mill L-36 641961.4 6751286.8 216.16 0 -90 57.00
EM-18-PP-321 East Mill L-36 641931.3 6751277.8 216.40 0 -90 60.00
EM-18-PP-322 East Mill L-36 641916.1 6751336.8 216.19 0 -90 57.00
EM-18-PP-323 East Mill L-36 641904.2 6751322.0 216.25 0 -90 60.00
EM-18-PP-324 East Mill L-36 641917.6 6751301.3 216.45 0 -90 57.00
EM-18-PP-325 East Mill L-36 641947.2 6751316.8 216.44 0 -90 60.00
EM-18-PP-326 East Mill L-36 641958.9 6751357.3 216.00 0 -90 60.00
EM-18-PP-327 East Mill L-36 641859.5 6751289.4 216.31 0 -90 60.00
EM-18-PP-328 East Mill L-36 641877.1 6751294.1 216.65 0 -90 60.00
EM-18-PP-329 East Mill L-36 641888.2 6751305.7 216.34 0 -90 60.00
EM-18-PP-330 East Mill L-36 641899.1 6751267.0 216.40 310 -75 60.00
EM-18-PP-331 East Mill L-35 642315.6 6751618.5 215.64 0 -90 60.00
EM-18-PP-332 East Mill L-35 642283.5 6751651.0 215.04 0 -90 60.00
EM-18-PP-333 East Mill L-35 642326.7 6751637.9 214.97 0 -90 60.00
EM-18-PP-334 East Mill L-35 642361.4 6751650.6 215.04 0 -90 60.00
EM-18-PP-335 East Mill L-35 642347.2 6751679.6 214.88 0 -90 60.00
EM-18-PP-336 East Mill L-35 642357.5 6751737.5 214.45 0 -90 54.00
EM-18-PP-337 East Mill L-35 642345.3 6751858.5 214.94 0 -90 48.00
EM-18-PP-338 East Mill L-35 642350.8 6751918.3 215.29 0 -90 54.00
EM-18-PP-339 East Mill L-35 642309.8 6751920.8 215.29 0 -90 45.00
EM-18-PP-340 East Mill L-35 642363.0 6751951.2 215.08 0 -90 45.00
EM-18-PP-341 East Mill L-35 642379.5 6751917.5 214.97 0 -90 60.00
EM-18-PP-342 East Mill L-35 642388.2 6751876.4 215.30 0 -90 60.00
EM-18-PP-343 East Mill L-35 642465.7 6751747.3 214.24 0 -90 57.00
EM-18-PP-344 East Mill L-35 642526.0 6751730.6 214.32 0 -90 57.00
EM-18-PP-345 East Mill L-35 642551.6 6751739.6 214.29 0 -90 57.00
EM-18-PP-346 East Mill L-35 642603.7 6751737.9 213.93 0 -90 57.00
EM-18-PP-347 East Mill L-35 642635.7 6751796.4 214.32 0 -90 57.00
EM-18-PP-348 East Mill L-35 642643.1 6751754.4 213.86 0 -90 57.00
EM-18-PP-349 East Mill L-35 642675.5 6751781.6 214.14 0 -90 51.00
EM-18-PP-350 East Mill L-35 642692.5 6751726.3 214.69 0 -90 57.00
EM-18-PP-351 East Mill L-36 641863.6 6751254.2 216.24 0 -90 60.00
EM-18-PP-352 East Mill L-36 641882.8 6751229.6 216.10 0 -90 60.00
EM-18-PP-353 East Mill L-36 641873.5 6751197.8 216.31 0 -90 63.00
EM-18-PP-354 East Mill L-36 641846.7 6751209.7 216.27 0 -90 57.00
EM-18-PP-355 East Mill L-36 641825.7 6751199.6 216.26 0 -90 60.00
EM-18-PP-356 East Mill L-36 641835.8 6751157.2 216.09 15 -50 72.00
EM-18-PP-357 East Mill L-36 641883.7 6751161.2 216.15 0 -90 42.00
EM-18-PP-358 East Mill L-36 641890.9 6751128.8 215.77 0 -90 57.00
EM-18-PP-359 East Mill L-36 641925.3 6751148.8 216.12 0 -90 57.00
EM-18-PP-360 East Mill L-36 641835.6 6751155.7 216.05 110 -50 72.00
EM-18-PP-361 East Mill L-36 641835.5 6751156.2 215.97 195 -50 69.00
EM-18-PP-362 East Mill L-36 641681.9 6751124.3 216.18 0 -90 57.00
EM-18-PP-363 East Mill L-36 641740.4 6751094.6 216.11 0 -90 57.00
EM-18-PP-364 East Mill L-36 641756.7 6751066.0 216.29 0 -90 54.00
EM-18-PP-365 East Mill L-36 641631.6 6751041.0 216.07 0 -90 57.00
EM-18-PP-366 East Mill L-36 641826.8 6750932.4 216.94 0 -90 60.00
EM-18-PP-367 East Mill L-36 641688.3 6750929.4 216.70 0 -90 63.00
EM-18-PP-368 East Mill L-36 641656.2 6750858.5 217.10 0 -90 60.00
EM-18-PP-369 East Mill L-36 641802.8 6750852.6 216.92 0 -90 63.00
EM-18-PP-370 East Mill L-36 641881.2 6750832.3 216.89 0 -90 60.00
EM-18-PP-371 East Mill L-36 641858.4 6750806.5 217.52 0 -90 66.00
EM-18-PP-372 East Mill L-36 641795.0 6750739.5 218.04 0 -90 60.00
EM-18-PP-373 East Mill L-36 641721.1 6750699.3 218.99 0 -90 63.00
EM-18-PP-374 East Mill L-36 641610.0 6750750.0 217.29 0 -90 57.00
EM-18-PP-375 East Mill L-36 641504.4 6750710.9 217.32 0 -90 54.00
EM-18-PP-376 East Mill L-36 641454.7 6750768.5 217.38 0 -90 57.00
EM-18-PP-377 East Mill L-36 641410.2 6750778.0 216.76 0 -90 57.00
EM-18-PP-378 East Mill L-36 641421.0 6750748.8 217.22 0 -90 57.00
EM-18-PP-379 East Mill L-35 642710.5 6751815.4 213.95 0 -90 51.00
EM-18-PP-380 East Mill L-35 642758.4 6751845.3 213.88 0 -90 51.00
EM-18-PP-381 East Mill L-35 642754.5 6751816.7 214.03 0 -90 51.00
EM-18-PP-382 East Mill L-35 642782.2 6751728.0 215.24 0 -90 51.00
EM-18-PP-383 East Mill L-35 642781.4 6751751.7 215.10 0 -90 51.00
EM-18-PP-384 East Mill L-35 642793.8 6751844.1 214.14 0 -90 51.00
EM-18-PP-385 East Mill L-35 642860.6 6751837.2 214.00 0 -90 51.00
For further information on Osisko Metals, visit
www.osiskometals.com or contact:
Jeff Hussey
President & CEO
Osisko Metals Incorporated
(514) 861-4441
Email: [email protected]
www.osiskometals.com
Christina Lalli
Director, Investor Relations
Osisko Metals Incorporated
(438) 399-8665
Email: [email protected]
www.osiskometals.com
Cautionary Note Regarding Forward-Looking Information
This news release contains "forward-looking information" within the meaning of applicable Canadian securities legislation
based on expectations, estimates and projections as at the date of this news release. Forward-looking information involves
risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to
differ materially from those expressed or implied by such forward-looking information. Forward-looking information in this news
release includes, but is not limited to, the use of proceeds of the Offering; the timing and ability of the Corporation, if at all, to
obtain final approval of the Offering from the TSX Venture Exchange; an exemption being available under MI 61-101 and
Policy 5.9 of the TSX Venture Exchange from the minority shareholder approval and valuation requirements for each related
party transaction; objectives, goals or future plans; statements regarding exploration results and exploration plans. Factors
that could cause actual results to differ materially from such forward-looking information include, but are not limited to, capital
and operating costs varying significantly from estimates; the preliminary nature of metallurgical test results; delays in
obtaining or failures to obtain required governmental, environmental or other project approvals; uncertainties relating to the